Manuel d'utilisation / d'entretien du produit PLC-XU07N du fabricant Fisher
Aller à la page of 40
Owner's Man ual PLC-XU07N Multimedia Pr ojector MODEL.
2 INFORMA TION T O THE USER NO T E : This equipment has been tested and f ound to comply with the limits for a Class A digital de vice, pursuant to P ar t 15 of FCC Rules. These limits are designed to pro vide reasonable protection against har mful interf erence when the equipment is operated in a commercial environment.
3 IMPOR T ANT SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning.
4 T ABLE OF CONTENTS FEA TURES AND DESIGN 5 BEFORE OPERA TION 16 COMPUTER MODE 24 VIDEO MODE 30 SETTING 32 APPENDIX 33 PREP ARA TION 6 NAME OF EACH PART OF THE PROJECTOR 6 SETTING-UP THE PROJECTOR 7 P.
5 FEA TURES AND DESIGN This Multimedia Projector is designed with most advance technology for portability, durability, and ease for use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
6 PREP ARA TION NAME OF EA CH P AR T OF THE PROJECT OR This Air Intake Vent should not be blocked. BO TT OM OF THE CABINET B ACK OF THE CABINET CARRY HANDLE HOT AIR EXHAUSTED ! Air blown from the exhaust vent is hot. When using or installing the projector, following attention should be taken.
7 PREP ARA TION SETTING-UP THE PR OJECT OR POSITIONING THE PR OJECT OR ROOM LIGHT The brightness in the room has a great influence on the picture quality. It is recommended to limit ambient lighting in order to provide the best image. ADJUST ABLE FEET Picture tilt and projection angle can be adjusted by twisting ADJUSTABLE FEET.
8 PREP ARA TION ● Do not cover the vent slot. ● Keep the rear grill at least one meter away from any object. ● Make sure that there is no object under the projector. An obstacle under the projector may prevent the projector from taking the cooling air through the bottom vent slot.
9 PREP ARA TION MO VING THE PR OJECT OR Use the Carry Handle when moving the Projector. ● Replace the lens cover and rotate the feet fully clockwise (to shorten the feet) when moving the projector to prevent damage to the cabinet.
▼ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT (MONO) VIDEO R–AUDIO–L S-VIDEO 10 CONNECTING THE PR OJECT OR TERMINALS OF THE PR OJECT OR Connect the computer output to this terminal. (Refer to P12 ~15.) When controlling the computer with the Remote Control of this projector, connect the mouse port to this connector.
11 CONNECTING THE PR OJECT OR ▼ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT (MONO) VIDEO R-AUDIO-L S-VIDEO CONNECTING T O THE VIDEO EQ UIPMENT Satellite TV Turner Video Cassett.
12 CONNECTING THE PR OJECT OR CONNECTING T O THE IBM-COMP A TIBLE COMPUTER To connect with the IBM-compatible computer, refer to the figure below. IBM-COMPATIBLE COMPUTERS (VGA / SVGA / XGA / SXGA) VGA Cable (supplied) Monitor Output Desktop type Laptop type Monitor Audio Speaker (stereo) Audio Amplifier Serial Cable ✽ (refer to P10.
13 B A ▼ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT (MONO) VIDEO R-AUDIO-L S-VIDEO CONNECTING THE PR OJECT OR To disconnect MOUSE CABLE, 1. Hold the portion (B) of the connector with one hand. 2. Pull the portion (A) to the arrow direction and remove connector.
14 CONNECTING THE PR OJECT OR ON 1 2 3 4 56 DIP CONNECTION T O THE MA CINT OSH COMPUTER To connect with the Macintosh computer, refer to the figure below.
B A ▼ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT VIDEO R-AUDIO-L S-VIDEO (MONO) ON 1 DIP ON OFF 23456 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x.
16 BEFORE OPERA TION OPERA TION OF THE REMO TE CONTR OL This remote control unit is not only able to operate the projector but also usable as a wireless mouse for a PC. POINT button and two CLICK buttons are used for wireless mouse operation. (Refer to page 33.
17 BEFORE OPERA TION Remote Contr ol Batteries Installation 1 2 3 Slide the lid upward. Press the lid downward and slide it. For correct polarity (+ and –), be sure the battery terminals are in contact with the pins in the compartment. Remove the battery compartment lid.
18 BEFORE OPERA TION T OP CONTR OLS AND INDICA T ORS LAMP REPLACE LAMP W ARNING TEMP . READ Y MODE A UTO IMA GE NORMAL MENU V OLUME SELECT FOCUS ZOOM ON-OFF Used to select zoom adjust. (Refer to P22.) Used to active or terminate the MENU operation. (Refer to P19.
19 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU Display ON-SCREEN MENU Press MENU button to display the ON-SCREEN MENU (MENU BAR). The red frame is the POINTER. Select the ITEM by pressing SELECT button. The dialog box of the ITEM appears.
20 BEFORE OPERA TION MENU B AR SYSTEM MENU Used to select a computer system. (Refer to P24) IMAGE MENU Used to adjust the computer image. [Fine sync. / Total dots / White Balance / Contrast / Brightness] (Refer to P27) PC ADJUST MENU Used to adjust the parameters to match with the input signal format.
21 B ASIC OPERA TIONS T urning on the Pr ojector Connect the projector's AC power cord into a wall outlet. The LAMP POWER indicator lights RED, and the READY indicator lights GREEN. Press the power ON-OFF button on the Remote Control Unit or on the Top Control to ON.
22 B ASIC OPERA TION ADJUSTING THE PICTURE ZOOM Adjustment 1 Press ZOOM / button on the Remote Control Unit or ZOOM ▲ / ▼ button on the Top Control to turn into the ZOOM mode. 2 Press ZOOM or ▲ button to have the image larger, and press ZOOM or ▼ button to have the smaller.
23 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SOUND and press the SELECT button. Another dialog box SOUND ADJUST Menu will appear. B ASIC OPERA TION Sound Volume Adjustment Press the VOLUME (+/–) buttons (located on the Top Control or on the Remote Control Unit) to adjust the volume.
24 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT button. COMPUTER MODE SELECTING COMPUTER MODE Direct Operation Press the MODE button on the Top Control or the Remote Control Unit.
25 COMPUTER MODE PC ADJUSTMENT This Projector can automatically detect display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be detected by this projector.
26 COMPUTER MODE COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 165 MHz of Dot Clock. NOTE : Specifications are subject to change without notice.
27 COMPUTER MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear.
28 COMPUTER MODE The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE and press the SELECT button.
29 COMPUTER MODE PICTURE POSITION ADJUSTMENT The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select POSITION and press the SELECT button.
30 VIDEO MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button. SELECTING VIDEO MODE Direct Operation Press the MODE button on the Top Control or the Remote Control Unit.
31 VIDEO MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear.
32 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear.
33 APPENDIX OPERA TING WIRELESS MOUSE Installation The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse for a PC. POINT buttons and two CLICK buttons are used for wireless mouse operation. Wireless mouse is usable when PC mouse pointer is displayed on the screen.
34 CLEANING THE PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. When you don't use the projector, replace the lens cover.
35 APPENDIX LAMP REPLA CEMENT Indicator When the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights yellow. When the image become dark or the color of the image become unnatural, replacement of the Lamp is required. Turn off the projector and disconnect the AC plug.
36 APPENDIX TR OUBLESHOO TING Before calling your dealer or service station for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment a s described in section "CONNECTING THE PROJECTOR" on pages 10 ~ 15.
37 APPENDIX W ARNING : High v oltages are used to operate this projector . Do not attempt to open the cabinet. Sanyo Service is easily obtained. If after following all operating instructions, you find.
38 This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. 0.9" TFT Active Matrix type, 3 panels TECHNICAL SPECIFICA TIONS Multi-media Projector 9.
39 OPTIONAL P ARTS The parts listed below are optionally supplied. When ordering those parts, give the name and the Type No. of it to the sales dealer. ● Control Cable for Serial Port Type No. : POA-MC12SRL ● Control Cable for ADB Port Type No. : POA-MC12MAC ● MAC Adapter Type No.
1YEAR In order to obtain warranty service, the product must be delivered to and picked up from and Authorized Sanyo Factory Service Center at the user's expense, unless specifically stated otherwise in this warranty. the names and addresses of authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Fisher PLC-XU07N c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Fisher PLC-XU07N - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Fisher PLC-XU07N, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Fisher PLC-XU07N va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Fisher PLC-XU07N, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Fisher PLC-XU07N.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Fisher PLC-XU07N. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Fisher PLC-XU07N ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
