Manuel d'utilisation / d'entretien du produit CG-WLBARGS du fabricant Allied Telesis
Aller à la page of 58
U ser Manual W i r e l e s s 1 0 8 M B r o a d b a n d R o u t e r CG-WLBARGS.
.
WLBARGS Manual PB 1 1. Product Introduction 1.1 Package Contents ................................................................................... 3 1.2 F eatures ......................................................................................
WLBARGS Manual 2 3 2 3 2 3 <W AN setting (internet)> ...................................................... 30 <W AN setting/ Dynamic DNS> ........................................... 33 <W AN setting/O ther setting> .................
2 3 2 3 WLBARGS Manual 2 3 corega ‘ s WLBARGS is an adv anced model of broadband Router as well as an IEEE802.11g wireless access point which can speeds up to 108Mbps .
WLBARGS Manual 4 5 4 5 4 5 1.3 Hardware In troduc tion 2 3 1 4 5 F ront 9 8 6 7 1 0 Back AP R ou ter 11 Bottom 1. Power LED (Gr een) Indicate power sta tus 2.Status LED (Red) ON:Reboot/Hung up/FirmW are upgrade 3. W AN LED (Green) ON: Connected Blink:T ransmitting or receiving data 4.
4 5 4 5 WLBARGS Manual 4 5 2.1 WLBARGS should be connecting to PC and modem F ollowing the steps below to set up WLBARGS and the connection. (1) Insert the cable connec tor into the Netw ork Adapter embeded in PC, and insert the other side into one of LAN por ts (1~4) of the Router .
WLBARGS Manual 6 7 6 7 6 7 3.1 TCP/IP C onfiguration The following st eps and screenshots maybe dissimilar in diff erent operat- ing systems. This manual takes Windows XP/200, 95/98/ME, and M ac O/S as examples: 3.1.1 Window s XP O/S (1) Enter [Contr ol Panel] -> click [Network Connection] -> right click and select [Open].
6 7 6 7 WLBARGS Manual 6 7 (3) Click [General] -> click [Internet Pr otocol ( TCP/IP), and click [Properties]. (4) Click [General], select [Obtaining an IP Address Aut omatically], and [O btain DNS Ser ver address aut omatically], and press [Advance].
WLBARGS Manual 8 9 8 9 (5) Click [DNS] tab , unselect [Register this connec tion ’ s address in DNS], and press [OK]. (6) Go back to [Internet Pr otocol TCP/IP] and press [OK].
8 9 WLBARGS Manual 8 9 (2) Right click [Local Area C onnection], and select [Properties] * Note: Please check if TCP/IP had been installed in the [Local Ar ea Connection]. If not, consult [Add TCP/IP] steps in this chapter . (3) Click [Internet protocol ( TCP/IP)] and click [P roper ties].
WLBARGS Manual 10 11 10 11 (4) Select [Obtain an IP address automatically], and [Obtain DNS server address automatically]. And click [Advance]. (5) Click [DNS] tab in [Adv ance TCP/IP setting] page , and unselect [Register this connection’ s DNS address , and press [OK].
10 11 WLBARGS Manual 10 11 3.1.3 Window s 98/95/ME O/S The configurations in all Windows 98/95/ME are the same , and this manual takes Windows 98 as an example. (1) Enter [Con trol P anel], and double click [Net work]. (2) Click [Configuration] tab , and selec t [ TCP/IP], click [Properties].
WLBARGS Manual 12 13 12 13 (4) Click [Gateway] tab , remove all the gatewa ys, and press [OK] to close the window . (5) Go to [Network] and press [OK] to close the page. (6) The [Restar t the windows] screen will pop-up , press [OK] to restart the PC.
12 13 WLBARGS Manual 12 13 3.2 Brow ser Configur ation 3.2.1 Window s O/S The following e xamples are for Windows XP O/S, skip this chapter if you are using Windows 200/98/ME. (1) Open Internet Explorer (IE 6.0), selec t [ T ools] menu and click [Internet Options].
WLBARGS Manual 14 15 14 15 14 15 (3) Unselect all three options in the [Local Area Network LAN Setting]. (4) Press [OK] in the [Int er net Options]. 3.2.2 Mac O/S (1) Open Internet Explorer (IE 5.0) Go to [Edit] in the menu bar , select [Internet Explorer Pr eferences].
14 15 14 15 WLBARGS Manual 14 15 4.1 Quick Network C onfiguration Basic configuration is required bef ore connection your computer to the inter- net via WLBARGS. The connection methods may be differed b y your contract to the ISP . Please reconfirm your connection conditions with your ISP prior to configure this router .
WLBARGS Manual 16 17 16 17 (5) Please select your region. e.g.) Singapore . Click on [Save]. (6) Click [Quick Installation Setting], and click [Nex t] to enter the Setup Wizard.
16 17 WLBARGS Manual 16 17 (8) Select your connection type. Please make sure that your ADSL connection type is correct as you enter; the correct information can be obtained from the documents given by y our ISP . If not, consult with your ISP befor e setting.
WLBARGS Manual 18 19 18 19 (2) Press [Mac address clone] t o obtain the Ethernet card’ s M ac address. Then press [Next]. (3) Click on [Save] t o per form connection tests.
18 19 WLBARGS Manual 18 19 (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the c onnec tion status. W hen [Connection ok] appears, click on [Close]. (5) Open the web browser (IE 6.0), and test with any websit e for testing the connection.
WLBARGS Manual 20 21 20 21 (2) Configure the network setting pro vided by your ISP . Then click on [Ne xt]. (3) Click on [Save] t o per form connection tests.
20 21 WLBARGS Manual 20 21 (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the c onnec tion status. W hen [Connection OK] appears, click on [Close]. (5) Open the web browser (IE 6.0), and test with any websit e for testing the connection.
WLBARGS Manual 22 23 22 23 (2) Enter the username and password pro vided by your ISP , and click on [Next]. ＊ Note: If you are a Hinet subscriber , type @hinet.net following the 8-digit account number , for instance: xxxxxxxx@hinet.net. Be careful, username and password are sensitive to capitals.
22 23 WLBARGS Manual 22 23 (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the c onnec tion status. W hen [Connection OK] appears, click on [Close]. (5) Open the web browser (IE 6.0), and test with any websit e for testing the connection.
WLBARGS Manual 24 25 24 25 Splitters Link to telephone Modem RJ-45 Power Adapter Hereunder is the setting on Centrino Notebook as an example , for wireless adapters in other brands, please refers to the original manuals.
24 25 WLBARGS Manual 24 25 (2) Go [Control P anel] - [Network connection] again -> click [ Wireless network connection] and hold right button to select [Av ailable wireless network connection], choose one av ailable network e.g. ) corega , and click [Connect].
WLBARGS Manual 26 27 26 27 26 27 (2) Go [Control P anel] - [Network connection] again -> click [ Wireless network connection] and hold Mouse’ s right button to select [Av ailable wireless network connection], e.g . ) corega , and click [Connect].
26 27 26 27 WLBARGS Manual 26 27 T o prevent fr om unlawful access to your network, you are recommended to perform wireless security setting. Enter the func tion menu, ad click on [802.
WLBARGS Manual 28 29 28 29 (5) Recommended to keep default values of [DTIM] and [P reamble Mode]. (6) Save y our settings by [Apply]. (7) Par ameters can be output by [Output Info .] 5.2 WP A S etting WP A is encr ypted by a periodic update , mak ing it more difficult to be hacked.
28 29 WLBARGS Manual 28 29 (4) Recommended to keep default values of [DTIM]and [Rekey Interval]. (5) Press [Apply] t o save setting . (6) Par ameters can be output by [Output Info]. <WP A-EAP> (1) S elect [ WP A2-EAP] or [ WP A/WP A2-EAP](Recommended).
WLBARGS Manual 30 31 30 31 30 31 The chapter will briefly introduce all functions of this product, and spell them out. Log in the management program and the below interface will appear . 6.1 Fea tures <Mode> Wireless F unc tion Wireless Enable: enable the wireless func tion.
30 31 30 31 WLBARGS Manual 30 31 A. For aut o obtain IP (DHCP): T ype Press [MA C clone] to obtain the Ethernet card's Mac address. Domain name Please refer t o your ISP internet service information, add/edit [Domain name]. Computer name Please refer t o your ISP internet service information, add/edit [Computer name].
WLBARGS Manual 32 33 32 33 Username Please enter username , given by y our ISP . Passw ord Please enter passwor d, given by your ISP . Confirm password Please type your password again. Connection type [Auto Reconnect]: always on line (recommended). [On Demand]: connect when accessing to Internet.
32 33 WLBARGS Manual 32 33 W AN ip address Please refer t o your ISP internet service information. Subnet mask Default gateway MTU Maxi mum T rans missio n Unit .
WLBARGS Manual 34 35 34 35 (1) select available dynamic DNS services. (2) enter username for dynamic DNS. (3) enter passwod f or dynamic DNS. (4) enter domain name. (5) IP update interval. (6) Click [Apply]. <W AN setting/Other setting> Direct PPPoE PPPoE pass-thr ough function enable/disable.
34 35 WLBARGS Manual 34 35 <LAN setting /DHCP server> (1) Select [Enable] to enable DHCP ser ver function. Default is [enable]. (2) Enter DHCP servers star t ip and end ip .
WLBARGS Manual 36 37 36 37 (1) Enter the pc name and select network connection type. (2) Configure the mac address da ta. (3) Click [Add PC Data] to c omplete the setting. <Wireless setting/802.11g/b setting> ESSID Default ESSID is [corega]. Mode .
36 37 WLBARGS Manual 36 37 <Wireless setting/A ccess control> Wireless to wireless communication Configure wireless c ommunication between clients. [Enable]/[Disable]: enable or disable wireless communication between clients. Wireless to wire communication Configure wireless and wir ed communication between clients.
WLBARGS Manual 38 39 38 39 (3) S elect one of protocol. (4) Enter the range of limited por t number . (5) S elect one of the time schedule limitations. (6) After clicking on [ Time Setting] button, a time schedule table is shown, once complete the setting , please click on [save] button to stor e the information.
38 39 WLBARGS Manual 38 39 <Adv anced setting/virtual ser v er> Vir tual server is an appointed port opened by the PC in connection with the product, allowing other users connecting up via W AN. Open ser vers or special online games can take advantage of this function.
WLBARGS Manual 40 41 40 41 *Note: 1. The PC becomes vulnerable to being hacked if DMZ function star ts. Please only use it in need. 2. The PC with DMZ function needs a fixed IP address.
40 41 WLBARGS Manual 40 41 Admin login name User name for login this management progr am. Default setting is [root] . Admin login password Default password is empty . Passw ord comfirmation Please retype password . Connection Timeout Enter connection time-out time.
WLBARGS Manual 42 43 42 43 *Remote contr ol The setting allows accessing the management pr ogram via remote control. The activation processes ar e as follows: (1) S elect [Enable]. (2) Indic ate 1 ~ 9600 f or parameters of por t range. e.g . ) 8080 (Recommended keeping default values).
42 43 WLBARGS Manual 42 43 <Status> Connection status log is displayed in the table . <Status/Log Displa y/D os A ttack lo g> Dos attack log is displayed in a table . <Status/Log Displa y/DHCP log> DHCP server log is displayed in a table .
WLBARGS Manual 44 45 44 45 <Status/Log Displa y/system log> System log is displa yed in the table. <Status/Log Displa y/E-mail func tion> An E-mail address can be set below . Special incidents will be recorded and sent to the appointed E-mail address .
44 45 WLBARGS Manual 44 45 <Adv anced Setting/Backup DNS> T wo DNS ser ver addresses can be set in the table . If the primar y DNS ser ver does not function, the system will use them as secondary addresses. <Adv anced Setting/Routing/Static Routing> Add/ Edit/ Delete static r outer can be set in the table.
WLBARGS Manual 46 47 PB 46 46 47 46 47 46 47 If you would like to use AP (Acc ess Point) function, please use the switch but- ton in the bottom of the product. T he operations are as the below: (1) Cut off the power . (2) Switch AP/Router to the left (AP side).
46 47 46 47 PB 46 WLBARGS Manual 46 47 46 47 When the installation fails or the connection doesn ’t succeed, it’ s recom- mended to take the following actions against the problems. (1) Find y our problem in the troubleshooting collection. (2) Go to our official website at http://www .
WLBARGS Manual 48 49 48 49 (9) Are the settings of your w eb browser correct? Q2. Not able to log in the management program. A: Y ou hav e 4 ways to check and solv e the problem: (1) Close and re-open the IE browser and login the pr ogram again. (2) Log out and re-login the Windows OS.
48 49 WLBARGS Manual 48 49 <Window s Me/ 98/ 95> (1) Click [Start] => Click [Run]. (2) Input [winipcfg] in the column => press [Ent er]. (3) Select your network adapter to display IP address . The IP should be 192.168.1. x ,if none, please click [Release] => Click [Renew].
WLBARGS Manual 50 51 50 51 50 51 Compliance Standard WLAN: IEEE802.11/IEEE802.11b/IEEE802.11g LAN: IEEE802.3/IEEE802.3u/IEEE802.3x Interface W AN: 10/100Mbps x 1 Port (RJ-45, Auto MDI/MDI-X) LAN: 10/100Mbps x 4 Ports (RJ-45, Auto MDI/MDI-X) Frequency Band 2.
WLBARGS Manual corega 可瑞加科技於 1996 年成立於日本新橫濱，致力於提供多元化的家用 網路產品：包括乙太網路交換器、無線區域網路系列產品、路由器、.
WLBARGS Manual F ederal C ommunic ation C ommission Inter ferenc e Statement This equipment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonable prot ec tion against harmful interference in a residential instal- lation.
memo.
memo.
.
www .corega.com.tw PN : T30-UM8409-00 Rev .B www .corega-asia.com 7F ., No. 10, Lane 345, Y angGuang St. Nei-Hu Chiu, T aipei Cit y 114, T aiwan R.O .C.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Allied Telesis CG-WLBARGS c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Allied Telesis CG-WLBARGS - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Allied Telesis CG-WLBARGS, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Allied Telesis CG-WLBARGS va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Allied Telesis CG-WLBARGS, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Allied Telesis CG-WLBARGS.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Allied Telesis CG-WLBARGS. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Allied Telesis CG-WLBARGS ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
