Manuel d'utilisation / d'entretien du produit CG-WLBARGMO du fabricant Allied Telesis
Aller à la page of 56
U ser Manual M I S O W i r e l e s s b r o a d b a n d R o u t e r CG-WLBARGMO.
.
WLBARGMO Manual PB 1 1. Product Introduction ...................................................................................................3 1.1 Package Contents ....................................................................................
WLBARGMO Manual 2 3 2 3 2 3 <Mode > ...................................................................................................... 30 <W AN setting (internet)>..............................................................30 <W AN setting/ D ynamic DNS> .
2 3 2 3 WLBARGMO Manual 2 3 Corega WLBARGMO is a MISO wireless broadband Router with IEEE802.11g wireless access point standard . Its MIMO XR technique can improve transmit speed and cover age area. The maximum transmit length is up to 450m and the cover age area can be six times more than general 802.
WLBARGMO Manual 4 5 4 5 4 5 1.3 Hardware In troduc tion 1 3 4 5 7 6 2 8 9 11 10 1. Initial Button Press this butt on it will reset to default setting 2. WLAN LED (Green) ON:Connected 3. Power LED (Gr een) Indicate power sta tus 4.Status LED (Red) Blink:W or king normal ON:Firmwar e upgrade 5.
4 5 4 5 WLBARGMO Manual 4 5 2.1 Hardware Installa tion F ollowing the steps below to set up WLBARGMO and the connection. (1) Insert the cable connec tor into the Network A dapter embeded in PC, and insert the other side into one of LAN por ts (1~4) of the Router .
WLBARGMO Manual 6 7 6 7 6 7 3.1 TCP/IP C onfiguration The following st eps and screenshots maybe dissimilar in diff erent operat- ing systems. This manual takes Windows XP/2000, 95/98/ME, and M ac O/S as examples: 3.1.1 Window s XP O/S (1) Enter [Contr ol Panel] -> click [Network Connection] -> right click and select [Open].
6 7 6 7 WLBARGMO Manual 6 7 (3) Click [General] -> click [Internet Pr otocol ( T CP/IP), and click [Pr oper ties]. (4) Click [General], selec t [Obtain an IP Address Automa tically], and [Obtain DNS Ser ver address automatically], and press [Adv ance].
WLBARGMO Manual 8 9 8 9 (5) Click [DNS] tab , unselect [Register this connec tion ’ s address in DNS], and press [OK]. (6) Go back to [Internet Pr otocol TCP/IP] and press [OK].
8 9 WLBARGMO Manual 8 9 (2) Right click [Local Area C onnection], and select [Properties] * Note: Please check if TCP/IP had been installed in the [Local Ar ea Connection].
WLBARGMO Manual 10 11 10 11 (4) Select [Obtain an IP address automatically], and [Obtain DNS server address automatically]. And click [Advance]. (5) Click [DNS] tab in [Adv ance TCP/IP setting] page , and unselect [Register this connection’ s DNS address , and press [OK].
10 11 WLBARGMO Manual 10 11 3.1.3 Window s 98/95/ME O/S The configurations in all Windows 98/95/ME are the same , and this manual takes Windows 98 as an example. (1) Enter [Con trol P anel], and double click [Network]. (2) Click [Configuration] tab , and selec t [ TCP/IP], click [Properties].
WLBARGMO Manual 12 13 12 13 (4) Click [Gateway] tab , remove all the gatewa ys, and press [OK] to close the window . (5) Go to [Network] and press [OK] to close the page. (6) The [Restar t the windows] screen will pop-up , press [OK] to restart the PC.
12 13 WLBARGMO Manual 12 13 3.2 Brow ser Configur ation 3.2.1 Window s O/S The following e xamples are for Windows XP O/S, skip this chapter if you are using Windows 2000/98/ME. (1) Open Internet Explorer (IE 6.0), selec t [ T ools] menu and click [Internet Options].
WLBARGMO Manual 14 15 14 15 14 15 (3) Unselect all three options in the [Local Area Network LAN Setting]. (4) Press [OK] in the [Int er net Options]. 3.2.2 Mac O/S (1) Open Internet Explorer (IE 5.0) Go to [Edit] in the menu bar , select [Internet Explorer Pr eferences].
14 15 14 15 WLBARGMO Manual 14 15 4.1 Quick Network C onfiguration Basic configuration is required bef ore connection your computer to the inter- net via WLBARGMO. The c onnec tion methods may be differed by y our contract to the ISP . Please reconfirm your connection conditions with your ISP prior t o configure this router .
WLBARGMO Manual 16 17 16 17 (5) Click [Quick Installation Setting]. (6) When seeing this screen shot, click on [Next]. (7) Select your connection type. Please make sure that your ADSL connection type is correct as you enter; the correct information can be obtained from the documents given by y our ISP .
16 17 WLBARGMO Manual 16 17 4.1.1 Auto obtain IP (DHCP) (1) If you are subscribing to auto obtain IP service ( or DHCP Dynamic IP) from your ISP , such as Cable Modem that obtain an IP automatically f or connection, please select [Auto obtain IP(DHCP)].
WLBARGMO Manual 18 19 18 19 (3) Click on [Save] t o per form connection tests. (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the c onnec tion status. When [C onnec tion ok] appears, click on [Close].
18 19 WLBARGMO Manual 18 19 4.1.2 Fix ed IP (1) If you are subscribing F ixed IP connection from your ISP , then selec t [Fix ed IP], and click on [Nex t].
WLBARGMO Manual 20 21 20 21 (3) Click on [Save] t o per form connection tests. (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the c onnec tion status. When [C onnec tion OK] appears, click on [Close].
20 21 WLBARGMO Manual 20 21 (5) Open the web browser (IE 6.0), and test with any websit e for testing the connection. *Note: If the connection to the website fails. Please make sure the data you entered are correct , or any mistake occured in the process of the installation, such as the LAN/W AN connections.
WLBARGMO Manual 22 23 22 23 (3) Click on [Save] t o per form connection tests. (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the c onnec tion status. When [C onnec tion OK] appears, click on [Close].
22 23 WLBARGMO Manual 22 23 (5) Open the web browser (IE 6.0), and test with any websit e for testing the connection. *Note: If the connection to the website fails. Please make sure the data you entered are correct , or any mistake occured in the process of the installation, such as the LAN/W AN connections.
WLBARGMO Manual 24 25 24 25 (2) Go [Control P anel] -> [Network connection] again ->R ight click [ Wireless network connection] ,select [Av ailable wireless network connection], choose one available netw ork e.g. ) corega , and click [Connect]. (3) Connection status will appear in the bottom right of the screen.
24 25 WLBARGMO Manual 24 25 <Window s XP (SP2) O/S> (1) Go [Control P anel], double click on [Network connection], right click on [ Wireless Networks Connection], selec t [proper ties], click on [ Wireless Network] tab , select [Use Windows t o configure my wir eless networks setting] , and press [OK].
WLBARGMO Manual 26 27 26 27 26 27 (3) Connection status will appear in the bottom right of the screen. *Note: The wireless connection has been established now . Please go to corega ’ s website at http://www .corega-asia.com to check the connection to the Internet.
26 27 26 27 WLBARGMO Manual 26 27 T o prevent fr om unlawful access to your network, you are recommended to per form wireless security setting. Type [192.168.1.1] in the bro wser ’ s address bar , press [Enter]. Enter the function menu, ad click on [802.
WLBARGMO Manual 28 29 28 29 5.2 WP A S etting WP A is encr ypted by a periodic update, making it more difficult to be hacked. Home users and company users are rec ommended to use <WP A-PSK> and <WP A-EAP> respectively . <WP A-PSK> (1) S elect [ WP A2-PSK] or [ WP A/WP A2-PSK] in the column of [Authentication] (Recommended).
28 29 WLBARGMO Manual 28 29 <WP A-EAP> (1) S elect [ WP A2-EAP] or [ WP A/WP A2-EAP](Recommended). in the column of [Authentication] a. [ WP A2-EAP]: The 2nd gener ation encr yption sk ill per forms stricter protec- tion than before . B efore selection, please check the func tion availability of your network adapter , or select b.
WLBARGMO Manual 30 31 30 31 30 31 The chapter will briefly introduce all functions of this product, and spell them out. Log in the management program and the below interface will appear . 6.1 Fea tures <Mode> Mode Select and switch to Router(wireless broadband router) or AP(Ac ess point) mode.
30 31 30 31 WLBARGMO Manual 30 31 A. For [PPP oE]: Username Please enter username , given by y our ISP . Passw ord Please enter passwor d, given by your ISP . Confirm password Please type your password again. Connection type [Auto Reconnect]: always on line (recommended).
WLBARGMO Manual 32 33 32 33 B.F or auto obtain IP (DHCP) : T ype Press [MA C address clone] to obtain the Ethernet card's MAC address . Host name Please refer t o your ISP internet service information, add/edit [Host name]. MTU value Maxi mum T rans missio n Unit .
32 33 WLBARGMO Manual 32 33 C. For fix ed IP W AN IP address Please refer t o your ISP internet service information. Subnet mask Default gateway MTU Maxi mum T rans missio n Unit .
WLBARGMO Manual 34 35 34 35 (1) select enable dynamic DNS ser vices. (2) Select one DDNS Provider . (3) enter login name. (4) enter login password . (5) Domain name. (6) Click [Save]. *Note: Corega does not provide DDNS service. Please register on one DDNS provider web sit e before you setup this function.
34 35 WLBARGMO Manual 34 35 <LAN setting /DHCP server> (1) Select [Enable] to enable DHCP ser ver function. Default is [enable]. (2) Enter DHCP servers star t IP and end IP .
WLBARGMO Manual 36 37 36 37 <Wireless setting/802.11g/b setting> ESSID ESSID is a name that makes wireless adapter identify this Router . T he default ESSID is [corega]. Mode • 802.11b/g: auto connect in either 802.11b or 802.11g. • 802.11g: connec t in 802.
36 37 WLBARGMO Manual 36 37 <Wireless setting/802.11g/b security setting> This section contains WEP ,W AP-PSK, WP A2-PSK, WP A-EAP and WP A2-EAP encryption setting, please refer to Chapter 5 to get detail information. <Wireless setting/A ccess control> Wireless to wireless connection Configure wireless c ommunication between clients.
WLBARGMO Manual 38 39 38 39 <Security setting> Configuring firewall and no response t o W AN Ping requests. <Security setting/Connection control> This function can limit or control some certain networking ser vices: (1) Enter the range of limited IP address.
38 39 WLBARGMO Manual 38 39 <Security setting/filter list> This function can forbid users to access certain website on the Internet: (1)Enter the forbidden URL or keywords (2) Then click [save] to complet e the configuration. All the forbidden data will be displayed in the table below .
WLBARGMO Manual 40 41 40 41 <Adv anced setting/DMZ> If the online game’ s por t range is unknown, or its parameter is differ ent ever y login, DMZ func tion is recommended. While this func tion starts, select the us- ers, being allowed to connect with, then click [S ave].
40 41 WLBARGMO Manual 40 41 <Advanc ed setting/Routing T able/Routing T able> All routing logs are display ed in the table. <Advanc ed setting/UPnP > Activating this function can detect the device or software of LAN, supporting UPnP . For example: online games supporting UPnP or Windows Messenger ( Ver .
WLBARGMO Manual 42 43 42 43 <Management> Admin login name User name for login this management progr am. Default setting is [root] . Admin login password Default password is empty . Passw ord comfirmation P lease retype password . Connection Timeout Enter connection time-out time.
42 43 WLBARGMO Manual 42 43 * Firmw are update (1) Click [Browse] to open the data f older . Follow the route tha t the firmware saves t o select the file. (2) After selection, click [Firmwar e update]. (3) When the countdown starts, do not click any button.
WLBARGMO Manual 44 45 44 45 The activation processes ar e as follows: (1) S elect [Enable]. (2) Indic ate 1 ~ 9600 for par ameters of port range. e.g. ) 8080 (Recommended keeping default values). (3) Click on [S ave] after completing settings . e.g . ) Assume the por t value is 8080, enter IP address as the type : [http:// xxx.
44 45 WLBARGMO Manual 44 45 <Status/Log Displa y/system log> System log is displa yed in the table. <Status/Log Displa y/E-mail func tion> An E-mail address can be set below . Special incidents will be recorded and sent to the appointed E-mail address .
WLBARGMO Manual 46 47 46 47 46 47 46 47 46 47 When the installation fails or the connection doesn ’t succeed, it ’ s recommend- ed to take the following actions. (1) Find y our problem in the troubleshooting collection. (2) Search on our official website at http://www .
46 47 46 47 46 47 WLBARGMO Manual 46 47 46 47 (8) Has all information provided b y your ISP been entered correctly? (9) Are the settings of your w eb browser correct? Q2. Can not access the management program A: Please confirm the following settings.
WLBARGMO Manual 48 49 48 49 48 49 <Window s XP/ 2000> (1) Click [Start] => [Programs] => [Command pr ompt]. (2) Input [ipconfig] => [Enter]. (3) Confirm IP address (which sould be 192.168.1.x). If the IP is incorrect, please enter 1-byte char acter as [ipconfig /renew] => Press [En ter].
48 49 48 49 WLBARGMO Manual 48 49 Compliance Standard WLAN:IEEE802.11, IEEE802.11b, IEEE802.11g LAN:IEEE802.3, IEEE802.3u, IEEE802.3x Interface W AN:10/100Mbps x 1 Port (RJ-45, Auto MDI/MDI-X) LAN:10/100Mbps x 4 Ports (RJ-45, Auto MDI/MDI-X) Frequency Band 2.
WLBARGMO Manual corega 可瑞加科技於 1996 年成立於日本新橫濱，致力於提供多元化的家用 網路產品：包括乙太網路交換器、無線區域網路系列產品、路由器.
WLBARGMO Manual F ederal C ommunic ation C ommission Interference Stat ement This equipment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonable prot ec tion against harmful inter ference in a residen tial instal- lation.
memo.
.
www .corega.com.tw PN : T30-UM8411-00 Rev .B www .corega-asia.com 7F ., No. 10, Lane 345, Y angGuang St. Nei-Hu Chiu, T aipei Cit y 114, T aiwan R.O.C.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Allied Telesis CG-WLBARGMO c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Allied Telesis CG-WLBARGMO - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Allied Telesis CG-WLBARGMO, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Allied Telesis CG-WLBARGMO va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Allied Telesis CG-WLBARGMO, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Allied Telesis CG-WLBARGMO.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Allied Telesis CG-WLBARGMO. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Allied Telesis CG-WLBARGMO ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
