Manuel d'utilisation / d'entretien du produit Microphone Preamplifier du fabricant Eureka
Aller à la page of 23
EUREKA MICROPHONE PREAMPLIFIER COMPRESSOR PARAMETRIC EQUALIZER USER’S MANUAL version 3.0 © 2003-2007, P r e S onus Audio Electronics, Incorporated. All rights reserved.
WARRANTY PreSonus Limited Warranty PreSonus Audio Electronics Inc. warrants this product to be free of defects in material and workmanship for a period of one y ear from the date of original retail purchase. This warranty is enforceable onl y by the original retail purc haser.
TABLE OF CONTENTS 3 1 Overview 1.1 Introduction 4 1.2 Features 4 2 Controls & Connections 2.1 Front Panel Basic Layout 7 2.2 Preamplifier 9 2.3 Compressor 10 2.4 Equalizer 12 2.5 Master 13 2.6 Back Panel 13 2.7 Power Supply 14 3 Operation 3.1 Microphones 15 3.
1 OVERVIEW 4 1.1 INTRODUCTION Thank you for purchasing the PreSonus EUREKA. PreSonus Audio Electronics has designed the EUREKA utilizing high-grade components to insure optimum performance for an infinite period of time. We believe the EUREKA to be an exceptional sounding unit and an except ional value.
OVERVIEW 5 chance of over-driving the i nput and avoiding distortion. • +22dBu Headroom. The EUREKA mic-pre has +22 dBu of headroom. This feature gives you wide dyna mic range and excellent transient response characteristics. • Saturation Control.
OVERVIEW 6 3-Band Parametric Equalizer . Total tonal control is what the Equalizer section provides. The EQ will let you fine tune the sound to suit your taste with exacting precision. • By pass Switch. A bypass switch is provided to audition the signal in an equalized version as compared to a direct unaffected signal.
2 CONTROLS & CONNECTIONS 7 2.1 FRONT PANEL BASIC LAYOUT The front panel of the EUREKA is divided into four sections – Preamplifier, Compressor, Equalizer and Master.
CONTROLS & CONNECTIONS 8 Compressor Section: • Level Control (Attack, Release, Ratio, Threshold, Gain) • Soft Knee Switch • Bypass Switch • Hi-pass Sidechain Filter Equalizer Section: • .
CONTROLS & CONNECTIONS 9 2.2 PREAMPLIFIER GAIN: Provides +52dB of gain for the microphone input and +44dB of gain for the instrument input. IMPEDANCE SELECTOR: Selects the amount of resi stance that is applied to the microphone input.
CONTROLS & CONNECTIONS 10 XLR connector wiring for Phantom Pow er Pin 1= GND Pin 2= +48V Pin3= +48V PAD: Engaging the Pad switch provides - 20dB of attenuation with the push of a button.
CONTROLS & CONNECTIONS 11 Basically, as you turn the Threshold knob counter-clockwise, the input signal is compressed. (If you have a ra tio setting of greater than 1:1.) RATIO: Sets the compression slope. This is defined as the output level versus the input level.
CONTROLS & CONNECTIONS 12 2.4 EQUALIZER The EQ is divided into three sections or bands (Low, Mid and High) Each band has the following controls: GAIN : Controls the amount of cut or boos t of the corresponding frequency. Each gain control offers +/-10dB of attenuation.
CONTROLS & CONNECTIONS 13 2.5 MASTER MASTER (LEVEL): This control adjusts the output level of the EUREKA. It functions as a master fader for the entire processing strip. It is useful for adjusting the overall output level up or down to match the optimum input level of a recorder, mixer, etc.
CONTROLS & CONNECTIONS 14 All Input and Output connectors are serv o balanced. XLR or ¼” TRS with the following wiring standard: XLR/TRS PIN 1 / Sleeve GND PIN 2/ Tip High (+) PIN 3/ Ring Low (-) INSERT: Return and Send connectors are provided for use in conjunction with audio process devices such as reve rbs, delays, de-essers, etc.
3 OPERA TION 15 3.1 MICROPHONES The Eureka works great with all types of microphones including dynamic, ribbon and condenser microphones. Dynamic microphones and ribbon microphones are generally lower output devices and require no external power source.
OPERATION 16 into the external processor, then ba ck into the EUREKA. The final, processed signal will be available at the EUREKA output connector. The Send and Return signal will be inserted after the microphone preamplifier, before the compressor. 3.
OPERATION 17 3.4 APPLICATION SETTINGS The following are application settings to get you started in using your Eureka. Feel free to experiment by pushing any and all buttons and turning knobs to their extreme values - remember there are no rules when creating music.
OPERATION 18 2. Acoustic Guitar Compressor settings Thresh Ratio Gain Soft Bypass Attack Release SC-HP -20 3 +2 In Out Mid Fast 10 Equalizer settings LOW MID HIGH EQ>Comp Q Gain Freq Q Ga in Freq Q Gain Freq Out n/a 0 n/a Nar -2 3k Wide +3 18.5k Nar = Narrow Q 3.
OPERATION 19 4. Bass Guitar Compressor settings Thresh Ratio Gain Soft Bypass Attack Release SC-HP -15 7 +4 In Out MF MS 10 Equalizer settings LOW MID HIGH EQ>Comp Q Gain Freq Q Ga in Freq Q Gain Freq Out Wide +6 85 MN -3 2.2k n/a 0 n/a MN – Medium Narrow, MW – Medium Wide 5.
OPERATION 20 6. Kick Drum Compressor settings Thresh Ratio Gain Soft Bypass Attack Release SC-HP -18 5 +2 Out Out MF MF 80 Equalizer settings LOW MID HIGH EQ>Comp Q Gain Freq Q Ga in Freq Q Gain Freq In Wide +8 60 Nar -8 400 Wide + 6 2.
OPERATION 21 8. Drum Overheads Compressor settings Thresh Ratio Gain Soft Bypass Attack Release SC-HP -22 5 Fast Out Out Fast Med 400 Equalizer settings LOW MID HIGH EQ>Comp Q Gain Freq Q Ga in Fre.
4 TECHNICAL 22 EUREKA SPECIFICATIONS Channels .................................................................................................... ONE Dynamic R ange .....................................................................................
TECHNICAL 23 Equalizer Low Band (+/-10dB ) ................................................................... 20H z – 300Hz Mid Band (+/-10dB) .................................................................... 200H z to 3kHz High Band )+/- 10dB) .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Eureka Microphone Preamplifier c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Eureka Microphone Preamplifier - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Eureka Microphone Preamplifier, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Eureka Microphone Preamplifier va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Eureka Microphone Preamplifier, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Eureka Microphone Preamplifier.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Eureka Microphone Preamplifier. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Eureka Microphone Preamplifier ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
