Manuel d'utilisation / d'entretien du produit VH-8G-L3 du fabricant Enterasys Networks
Aller à la page of 41
Vertical Horizon VH-8G-L3 Gigabit Ethernet Switch USER GUIDE 9033705-01.
.
Notice 9033705-01 9033705-01 ELECTRICAL HAZARD: Only qualified personnel should perform installation procedures. NOTICE Enterasys Networks reserves the right to make changes in specifications and other information contained in this document and its web site without prior notice.
Notice 9033705-01 FCC NOTICE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Notice 9033705-01 9033705-01 CLASS A ITE NOTICE WARNING: This is a class A product. In a domes tic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Notice 9033705-01 ENTERASYS NETWORKS, INC. PROGRAM LICENSE AGREEMENT BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT. This document is an agreement (“Agreem ent” ) between You, the end user, and Enterasys Networks, Inc.
Notice 9033705-01 If the Program is exported from the United St ates pursuant to the License Exception TSR under the U.S. Export Administration Regula tions, in addition to the restriction on transfer.
Notice 9033705-01 ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAM AGES, OR IN THE DURATION OR LIMITATION OF IMPLIED WARRANTIES IN SOME INSTANCES, THE ABOVE LIMITATION AND EXCLUSIONS MAY NOT APPLY TO YOU.
Notice 9033705-01 DECLARATION OF CONFORMITY Application of Council Directive(s): 89/336/EEC 73/23/EEC Manufacturer’s Name: Enterasys Netw orks, Inc. Manufacturer’s Address: 500 Spaulding Turnpike PO Box 3060 Portsmouth, NH 03801 European Representative Add ress: Enterasys Networks Ltd.
.
1 9033705-01 Table of Contents PREFACE ................................................................................ 3 Purpose .......................................................................... 3 Audience ...................................
9033705-01 2 Inspecting Your Shipment .......................................... 20 Installation................................................................... 20 Desktop or Shelf Installation ...................................... 21 Rack Installation .
3 9033705-01 Preface Purpose This guide provides information about the features and applications of the Enterasys Networks Vertical Horizon VH-8G-L3 layer 3 switch.
9033705-01 4 Keyboard Entries This guide uses the following conventions for keyboard entries: • When you read “enter”, type the text and press the [Enter] key. • Example: Enter the Gateway IP address and press the [Enter] key. • When you read “select”, highlight the menu item and press the [Enter] key.
5 9033705-01 mounting instructions. Instru ctions for making connections and powering up the Switch are provided as well. Chapter 3. Connecting the Switch: This describes how to connect the VH-8G-L3 to your Ethernet network, including connecting the Switch to an end node and connecting the Switch to hub or switch.
6 9033705-01 Product Overview This chapter provides the following information: • Product Description • Features • Front and Rear Panel Component Descriptions • Feature Summaries • Application Example Description This section describes Layer 3 functionality and Layer 2 and Layer 3 features of the VH-8G-L3.
7 9033705-01 The VH-8G-L3 can be thought of as eight Gigabit Ethernet Layer 2 switching domains with a wire-speed router between each domain. It can be deployed in a network between a traditional router and the intranetwork.
9033705-01 8 traditional collapsed backbone router. The VH-8G-L3 Layer 3 switch communicates with a WAN router using a standard Gigabit Ethernet port. Multiple VH-8G-L3 switches can also be linked.
9 9033705-01 • 8K active MAC address entry t able per device with automatic learning and aging (10 to 9999 seconds). • 512 KB packet buffer per device. • Broadcast and Multicast storm filtering. • Supports Port Mirroring. • Supports Port Trunking – up to four trunk groups may be set up.
9033705-01 10 • Supports PIM Dense Mode (dra ft-ietf-pim-v2-dm-03.txt). • Supports DVMRP (draft-ietf-idmr-dvmrp-v3-09.txt). • Supports Username to IP address mapping. • Supports IP multi-netting. • Supports IP packet de-fragmentation. • Supports Path MTU discovery.
11 9033705-01 • Built-in SNMP management: Bridge MIB (RFC 1493) RMON MIB (RFC 1757) – 4 groups MIB-II (RFC 1213) Interface MIB ext. (RFC 2233) CIDR MIB (RFC 2096) – excluding the IP Forwarding Table. 802.1p MIB (RFC 2674).
9033705-01 12 theoretical throughput over 100Mbps Fast Ethernet and a one hundred-fold increase over 10M bps Ethernet. Since it is compatible with all 10Mbps and 100Mbps Ethernet environments, Gigabit Ethernet pr ovides a straightforward upgrade without wasting a company ’s existing investment in hardware, software, and trained personnel.
13 9033705-01 • The AC power connector is a standard three-pronged connector that supports the power cord. Plug-in the female connector of the provided power cord into this socket, and the male side of the cord into a power outlet. Supported input voltages range from 100 ~ 240 VAC at 50 ~ 60 Hz.
9033705-01 14 Figure 1-4. The LED indicators • Pow er This indicator on the front panel will light green approximately 2 seconds after the Switch is powered on to indicate the r eady state of the device.
15 9033705-01 network administrator can manage, control and monitor the switch from the console program. The VH-8G-L3 contains a CPU, memory for data storage, flash memory for configuration data, operational programs, and SNMP agent firmware.
9033705-01 16 primary link. Once the Spanning Tree Protocol is configured and enabled, primary links are established and duplicated links are blocked automatically. The reactivation of the blocked links (at the time of a primary link failure) is also accomplished automatically – wi thout operator intervention.
17 9033705-01 Broadcast storms c onsist of broadcast packets that flood and/or are looped on a network causing noticeable performance degradation and in extreme cases, network failure. Broadcast storms c an be caused by malfunctioning NICs, bad cable connections and applications or protocols that generate broadcast traffic, among others.
9033705-01 18 Configuration File Name None Firmware File Name None Out-Of-Band Baud Rate 9600 RS232 Mode Console IP Address 0.0.0.0 Subnet Mask 0.0.0.0 Default Gateway 0.
19 9033705-01 19 9033705-01 Backpressure Disabled Port Lock Disabled Broadcast Storm Rising Action Do Nothing Broadcast Storm Falling Action Do Nothing Broadcast Storm Rising Threshold 128Kpps Broadcast Storm Falling Threshold < 128Kpps Community String “public”, “private” VLAN Mode IEEE 802.
9033705-01 20 2. Installation Inspecting Your Shipment Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: • One VH-8G-L3 8-port Gigabit Ethernet Layer 3 Switch. • Mounting kit: 2 mounting brackets and screws.
21 9033705-01 Desktop or Shelf Installation When installing the Switch on a desktop or shelf, the rubber feet included with the device should first be attached. Attach these cushioning feet on the bottom at each corner of the device. Allow adequate space for ventilation between the device and the objects around it.
9033705-01 22 Figure 2-2B. Installing the Sw itch on an equipment rack Power on The VH-8G-L3 can be used with AC power supply 100-240 VAC, 50 - 60 Hz. Simply connect the power cord to the AC power connector located on the rear panel of the Switch and to AC power outlet.
23 9033705-01 3. Connecting The Switch This chapter describes how to connect the VH-8G-L3 to your Ethernet network. Switch to End Node A PC can be connected to the Swit ch via a fiber optic cable. The PC can be connected to any of the eight ports of the Switch.
9033705-01 24 Figure 3-2. Example of Sw itch to sw itch connection.
9033705-01 25 Appendix A. Technical Specifications General Standards: IEEE 802.3z 1000BASE-SX Gigabit Ethernet IEEE 802.1 P/Q VLAN IEEE 802.3x Full-duplex Flow Control ANSI/IEEE 802.
9033705-01 26 9033705-01 26 Storage Temperature: -40 to 70 degrees Celsius Humidity: Operating: 10% to 85% RH non-condensing Dimensions: 441 mm x 210 mm x 43 mm (1U), 19 inch rack-mount width Weight: 2.
27 9033705-01 Performance Transmission Method: Store-and-forward RAM Buffer: 16 MB per device Filtering Address Table: 8K MAC address per device Packet Filtering/ Forwarding Rate: Full-wire speed for all connections 1,488,000 pps per port (for 1000Mbps) MAC Address Learning: Automatic update.
28 9033705-01 Appendix B. Flow Control Flow control is a mechanism t hat allows you to protect the switch from overload conditions and to keep additional traffic off the network when excessive congestion will result.
9033705-01 29 Appendix C. Acronyms and Abbreviations Term Definition 10BASE-T 10 Mbps twisted-pair Ethernet 100BASE-TX 100 Mbps twisted-pair Fast Ethernet 100BASE-FX 100 Mbps fiber option Fast Etherne.
9033705 30 9033705 30 MDI Media Dependent Interface MDI Media Device Interface MIB Management Information Base RFC Request for Comment RMON Remote Monitoring RXD Receive Data.
9033705-01 31 Index AC inputs ................................ 25 AC power cord........................ 20 Accessory pack ....................... 20 Auto polarity detection ............. 8 Bridge MIB (RFC 1268) ......... 11 Broadcast domains .........
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Enterasys Networks VH-8G-L3 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Enterasys Networks VH-8G-L3 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Enterasys Networks VH-8G-L3, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Enterasys Networks VH-8G-L3 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Enterasys Networks VH-8G-L3, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Enterasys Networks VH-8G-L3.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Enterasys Networks VH-8G-L3. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Enterasys Networks VH-8G-L3 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
