Manuel d'utilisation / d'entretien du produit RX211 du fabricant Eizo
Aller à la page of 53
English Deutsch Français 中文 日本語 Impor tant Please read this User's Manual carefully to f amiliarize yourself with saf e and eff ective usage procedures.
For U.S.A. , Canada, etc. (rated 100-120 V ac) Only FCC Declaration of Conformity W e, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 W arland Drive, Cypress, CA 90630 Phone: (562) 431-501 1 declare that the pr oduct T rade name: EIZO Model: RadiForce RX21 1 is in conformity with Part 15 of the FCC Rules.
It shall be assured that the final system is in compliance to IEC60601-1-1 requirements. English.
2 SAFETY SYMBOLS SAFETY SYMBOLS This manual uses the saf ety symbols below . They denote critical information. Please read them carefully . W ARNING F ailure to abide by the inf or mation in a W ARNING may result in serious injur y and can be lif e threatening.
T ABLE OF CONTENTS 3 PRECA UTIONS ....................................................................................................................... 4 Notice f or this monitor ......................................................................
4 PRECA UTIONS PRECA UTIONS IMPORT ANT! • This product has been adju sted specifically for use in the reg ion to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications.
PRECA UTIONS 5 W ARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediatel y and contact your dealer f or advice . Attempting to use a malfunctioning unit ma y result in fire, electric shock, or equipment damage.
6 PRECA UTIONS W ARNING Use the enclosed po wer cord and connect to the standar d power outlet of y our country . Be sure to remain within the rated v oltage of the power cord. Not doing so ma y result in fire or electric shock. P ower supply: 100-120/200-240 V ac 50/60Hz T o disconnect the po wer cord, grasp the plug firmly and pull.
PRECA UTIONS 7 W ARNING Do not touch a damaged LCD panel directl y with bare hands. The liquid cr ystal which leaks from the panel is poisonous if it enters the ey es or mouth. If any par t of the skin or body comes in direct contact with the panel, please wash thoroughly .
8 Notice f or this monitor Notice f or this monitor • This product is suited to displa y medical images of such modalities as MRI and CT . It does not suppor t the display of mammog raph y images f or diagnosis. • This product has been adjusted specifically f or use in the region to which it was originally shipped.
Notice f or this monitor 9 Cleaning NO TE • Never use thinner , benzene, alcohol, abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel. [LCD P anel] • The LCD surface can be cleaned with a soft cloth, such as cotton or lens paper .
10 1. Introduction 1. Intr oduction Thank you very much for choosing an EIZO Color Monitor . 1-1. Features • Dual inputs compliant (DVI-D and D-Sub mini 15 pin connecters) • DVI (p.
1. Introduction 11 1-3. Contr ols and Connector s Fr ont (1) Mode Switch Displa ys the CAL Switch menu (p . 27). (2) Input Signal Selection Switch Switches input signals f or display when tw o PCs are connected to the monitor . (3) Enter Switch Displa ys the Adjustment menu, determines an item on the menu screen, and sav es v alues adjusted.
12 1. Introduction Side / Rear (7) Input signal connectors D VI-D Connector (SIGNAL1) (8) Input signal connectors D-Sub min 15 pin Connector (SIGNAL2) (9) USB por t (Up) Connects the USB cable in order to use the pro vided software. (10) USB por t (Down) Connects a peripheral USB device .
2. Cable Connection and Screen Adjustment 13 2. Cable Connection and Screen Adjustment 2-1. Bef ore Connecting Before connecting your monitor to the PC, change the display screen settings resolution (p. 45) and frequency in accordance with the charts below .
14 2. Cable Connection and Screen Adjustment 2-2. Connecting the signal cable NO TE • Be sure that the power switches of both the PC and the monitor are OFF . • Refer to the PC user's manual when connecting the monitor . 1 Rotate the monitor ninety degrees counter -clockwise into the portrait position.
2. Cable Connection and Screen Adjustment 15 3 Connect the power cord to the power connector on the rear of the monitor . 4 Thread the power cord and signal cable through the cable holder on the rear of the monitor stand.
16 2. Cable Connection and Screen Adjustment 7 T urn on the PC’ s power . The image will appear . If an image does not appear , refer to “7. T roubleshooting” (p. 36) for additional advice. Refer to “2-4. Screen Adjustment (In case of Analog Input Signal)” (p.
2. Cable Connection and Screen Adjustment 17 2-3. Connecting T w o PCs to the Monitor T wo PCs can be connected to the monitor through the Signal 1 and the Signal 2 on the back of the monitor .
18 2. Cable Connection and Screen Adjustment 2-4. Screen Adjustment (Analog Input) Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode.
2. Cable Connection and Screen Adjustment 19 If the horizontal flickering, blur or bars appear , proceed to <Phase> adjustment as follows. (2) Horizontal flickering, blurring or bars appear on the screen. Use the <Phase> (p. 44) adjustment.
20 2. Cable Connection and Screen Adjustment (4) Screen image is smaller or larger than the actual screen images. Use the <Resolution> adjustment. Adjustment is needed when the input signal resolution and the resolution now being displayed are different.
3. Adjustment and Settings 21 3. Adjustment and Settings 3-1. Ho w to use the ScreenManager Screen adjustments and settings can be performed with the ScreenManager (OSD) and buttons of the monitor . Adjustment Startup Description ScreenManager menu Enter Switch 3-2.
22 3. Adjustment and Settings 3-2. ScreenManager menu Using ScreenManager menu controls the screen adjustment and settings. Refer to the “Explanation” column in the following table for each detailed functions. Functions The following table shows all the ScreenManager’ s adjustment and setting menus.
3. Adjustment and Settings 23 Main menu Sub menu Explanation Language English, German, F rench, Spanish, Italian, Swedish, Chinese(Simplified), Chinese(T raditional) and Japanese Select the ScreenManager’ s language. *1 The adjustable functions depend on the selected CAL Switch mode.
24 3. Adjustment and Settings Image Rotation Function <Setup>-<Image Rotation> This function enables the computer , at startup, to detect the orientation of the monitor and display images correctly . Disable this function when using the software's rotation function to change image display orientation.
3. Adjustment and Settings 25 P ower Sa ving Function <P owerManager> The <PowerManager> menu in the ScreenManager enables to set the power saving. NO TE • Do your part to conserve energy , turn off the monitor when you are finished using it.
26 3. Adjustment and Settings Off Timer <Others>-<Off Timer> The off timer function causes the monitor to turn off automatically after a predetermined amount of time has lapsed. This function was created to reduce the afterimages particular to LCD monitors, which appear when the screen is left on for long periods without use.
3. Adjustment and Settings 27 3-3. CAL Switch Function The most suitable display mode is available by switching the mode switch on the control panel. The <Brightness>, <T emperature>, and <Gamma> settings can be adjusted on the CAL Switch menu.
28 3. Adjustment and Settings 3-4. Adjustment Loc k Function Use the “Adjustment Lock” function to prevent any accidental changes. Lock ed functions • Displa y , adjustment, and setting of the S.
4. Color Adjustment and Image Adjustment 29 4. Color Adjustment and Image Adjustment 4-1. Color Adjustment The color settings for each CAL Switch mode can be adjusted and saved in the <Color> menu of the ScreenManager .
30 4. Color Adjustment and Image Adjustment Adjustment Contents Menu Description Adjustab le Range Brightness Sets the br ightness of the screen 0~120% T emperature (p . 45) Sets the color temperature 6000K~15000K in 500Kincrements (including 9300 K).
4. Color Adjustment and Image Adjustment 31 4-2. Image Adjustment With this function, low-resolution images, such as VGA 640x480, can be displayed at a desired size. In addition, it is possible to adjust or set smoothing for such images and the brightness for blank border areas.
32 4. Color Adjustment and Image Adjustment Adjusting the brightness of the blac k area surrounding the displa yed image [Procedure] 1. Select <Border Intensity> in the ScreenManager <Others> menu. 2. Make adjustments with the Left and Right directing switches.
5. Making Use of USB (Universal Serial Bus) 33 5. Making Use of USB (Univer sal Serial Bus) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected.
34 5. Making Use of USB (Universal Serial Bus) 3 After setting up, the monitor’ s USB hub is available for connecting USB compliant peripherals to the downstream ports of the monitor .
6. Attaching an Ar m 35 6. Attaching an Arm The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the LCD monitor . NO TE • If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers before selecting.
36 7. T roubleshooting 7. T r oubleshooting If a problem persists even after applying the suggested remedies, contact an EIZO dealer . • No picture problems See No.1 ~ No.2 • Imaging problems See No.3 ~ No.14 • Other problems See No.15~ No.20 • USB problems See No.
7. T roub leshooting 37 Prob lems P oints to chec k with possible solutions • The message appears when the signal is out of input range. (Example) • Reboot the PC . • Use the g raphics board’ s utility software to change the frequency setting.
38 7. T roubleshooting Prob lems P oints to chec k with possible solutions 13. The characters and images hav e sev eral vertical bars on their right side. • Adjust the char acters and images using the <Signal Filter>. 14. Distor tion appears like the figure below .
7. T roub leshooting 39 Prob lems P oints to chec k with possible solutions 19. Hissing noises emanate from the monitor . • This monitor has a f an built-in to suppress the inside temperature increase. The noise could be heard depending on the installation location, but it's not an abnormality in function.
40 8. Specifications 8. Specifications LCD P anel 54cm(21.3 inch), TFT color LDC panel Surf ace treatment: Anti-Glare Hard Coating Surf ace hardness: 2H Response Time: 17ms Viewing Angle Horizontal:170°, V er tical: 170° (CR 10 or more) Dot Pitch 0.
8. Specifications 41 Dimensions With stand 376mm (W) x 522.5~ 604.5 mm (H) x 208.5 mm (D) (14.8”(W) x 20.6” ~ 23.8” (H) x 8.2”(D)) Without stand 376mm (W) x 500mm (H) x 92mm (D) (14.8”(W) x 19.7”(H) x 3.62”(D)) W eight With stand 9.4 kg (20.
42 8. Specifications Recommended brightness value f or each color temperature value Color temperature setting value Adjustable range: from 6500 K to 15000 K or Off Recommended brightness value Off 33.
8. Specifications 43 Pin Assignment •D VI-D Connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 19 20 21 17 18 22 23 24 Pin No. Signal Pin No. Signal Pin No. Signal 1 T .M.D .S . Data2- 9 T .M.D .S. Data1- 17 T .M.D .S. Data0- 2 T .M.D .S . Data2+ 10 T .
44 9. Glossar y 9. Glossar y Clock With the analog input signal display , the analog signal is converted to a digital signal by the LCD circuitry . T o convert the signal correctly , the LCD monitor needs to produce the same number clock pulse as the dot clock of the graphics system.
9. Glossar y 45 Range Adjustment The Range Adjustment controls the level of output signal range to display the whole color gradation. Resolution The LCD panel consists of a fixed number of pixel elements which are illuminated to form the screen image.
i APPENDIX/ANHANG/ANNEXE/ 附录 / 付録 APPENDIX/ANHANG/ANNEXE/ 附录 / 付録 Preset Timing V oreingestellte T aktraten Synchr onisation prédéfinie 预设定时 プリセットタイミング T.
ii APPENDIX/ANHANG/ANNEXE/ 附录 / 付録 Mode 表示モード Dot Clock ドット クロック Sync P olarity 極性 Frequencies 周波数 H 水平 V 垂直 fH : kHz 水平： kHz fV : Hz 垂直： Hz VGA×640×480@60Hz 25.2 MHz Nega 負 Nega 負 31.
EMC Inf ormation CA UTION The RadiForce series require special precautions regar ding EMC and need to be installed, put into service and used according to the f ollowing information. Do not use any cab les other than the cables that pro vided or specified by us.
Immunity test EN60601 test level Compliance level Electromagnetic environment - guidance Conducted RF EN61000-4-6 3V rms 150kHz to 80MHz 3V rms 150kHz to 80MHz Portable and mobile RF communications eq.
Hinweise zur Auswahl des richtigen Schwenkarms für Ihr en Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. W enn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden.
1st Edition-March, 2008 Printed in Japan. 00N0L416A1 EIZO NANAO CORPORA TION 153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan Phone: +81 76 277 6792 Fax:+81 76 277 6793 EIZO NANAO TECHNOLOGIES INC.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Eizo RX211 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Eizo RX211 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Eizo RX211, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Eizo RX211 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Eizo RX211, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Eizo RX211.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Eizo RX211. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Eizo RX211 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
