Manuel d'utilisation / d'entretien du produit XEO 4 du fabricant Dynaudio
Aller à la page of 32
Owner’ s Manual Xeo English.
2 Dynaudio All Apple products are trademarks of Apple Inc. All Sony products are trademarks of Sony Electronics Inc. All Sonos products are trademarks of Sonos Inc. Logitech Squeezebox is a trademark of Logitech Inc. An update to this manual may be necessary due to product improvements and new functions.
3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
4 Dynaudio 14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way , such as power supply cord or plug is damaged, liquid has been.
5 Safety information 7 Xeo loudspeakers 7 Power supply unit for Xeo Hub, Extender , and Link 7 Scope of delivery 8 Xeo loudspeakers (Xeo 4 or Xeo 6) 8 Xeo Hub 9 Xeo Extender 10 Xeo Link 10 Unpacking 1.
6 Dynaudio Thank you for choosing Dynaudio Xeo. Xeo combines the latest wireless technology with impressive sound quality and makes listening to music truly comfortable and easy . The next few pages contain important information on connecting the system and its operation to ensure perfect function and the best-possible sound quality .
7 Safety information Xeo loudspeakers W ARNING Dangerous electrical voltage If the loudspeakers are connected to the mains voltage, a dangerous electrical voltage is present inside the speakers. ► Never open the loudspeaker housing. ► Do not operate defective loudspeakers and disconnect defective loudspeakers from the mains voltage.
8 Dynaudio Scope of delivery Xeo loudspeakers (Xeo 4 or Xeo 6) 2 Xeo loudspeakers (Xeo 4 or Xeo 6) 2 Xeo loudspeaker cloth covers 1 Xeo remote control 2 Xeo loudspeaker power cables (c.
9 Xeo Hub 1 Xeo Hub 1 Xeo power supply unit with micro USB cable (country-specic version) 1 stereo analog cable (jack 3.5 mm – 3.5 mm) 1 stereo analog cable (RCA – RCA) 1 op.
10 Dynaudio Xeo Extender 1 Xeo Extender 1 Xeo power supply unit with micro USB cable (country-specic version) 1 Xeo rst time setup manual (quick guide for installation, not shown) Xeo Li.
11 Unpacking After unpacking, make sure the system is complete and check the device and all accessories for transport damage. T ransport damage may be expected if the packaging is already severely harmed. Do not attempt to commission a damaged device.
12 Dynaudio The Xeo system Xeo consists of several high-quality components that are optimally matched. When combined, they can fulll the most demanding requirements for a wireless multi-room and multi-source system. NOTE: This manual describes all of the available Xeo components.
13 Combination examples Below you will nd several examples of Xeo component combinations. The high level of exibility in the Xeo system enables even more variants.
14 Dynaudio Connection and operation This section describes the connections and control elements for the Xeo components. Please contact your Dynaudio Xeo distributor if you have any problems with connection and start-up. Distributor addresses can be found in the Internet at www .
15 Display elements LED Connection status LED illuminated in blue: Connection established (to a loudspeaker , Extender , or Link). LED ashes: The Hub is searching for a connection. LED illuminated in red: The Hub could not establish a connection. Inputs 1 Aux in Input for cable with stereo jack (3.
16 Dynaudio Other connections and control elements Ethernet Network connection Intended for future functions. Id T ransmission channel If you assign an ID, you can select the desired Hub from several Hubs using the remote control. In addition, each ID has its own transmission channel: A = 2.
17 Y our signal source Signal source output Xeo Hub input Cable (source – Hub) Notes Astell&Kern Headphones 1: Aux in Jack 3.5 mm – 3.5 mm – Optical 2: Optical In T oslink – T oslink PonoPlayer Jack 1: Aux in Jack 3.5 mm – 3.5 mm – Docking station, network client, Sonos, Logitech, Squeezebox, .
18 Dynaudio Xeo loudspeakers The active Xeo 4 and Xeo 6 loudspeakers have an integrated amplier and can be controlled with the Xeo remote control. The loudspeakers can be switched between stereo and mono mode using a switch on the rear .
19 Division into audio zones The Xeo loudspeakers (as well as Xeo Link) can be assigned to an audio zone using the Zone selector switch. All components assigned to a zone can be operated together via the remote control.
20 Dynaudio Cloth cover The cloth cover has been designed so it does not inuence the sound dispersion of the loudspeaker . The cloth cover is attached to the housing with magnets and may be removed if needed.
21 Switching on/standby mode T o switch the loudspeaker on from standby mode: ► Point the remote control at the loudspeaker and press the ON button or press on the interface display . ▼ The loudspeaker will automatically search for an active Hub and an audio signal.
22 Dynaudio Interface display The display on the housing indicates the operational state of the loudspeakers and system using LEDs with various colors and ash functions. Buttons on the display On/off switch Pressing this button for longer than 2 seconds will switch the loudspeaker on or to standby mode.
23 Switch-off process The LEDs go out one by one. In the nal state, only one LED is illuminated dimly in red. The loudspeaker is being switched off. Select a Hub One of the three LEDs ashes. LED 1 = Hub A LED 2 = Hub B LED 3 = Hub C Select an input One of the four LEDs ashes.
24 Dynaudio Xeo Extender The Xeo Extender extends the reception range of the Xeo Hub. As a result, Xeo loudspeakers or other Xeo components can be operated further away from the Hub. Connections and control elements Front Left LED Reception status LED illuminated in blue: There is a connection to a Hub.
25 Connecting and establishing a link Hub Extender 1. Connect the Power socket to the voltage supply via the Xeo power supply unit. Do not use a different power supply unit! 2. Select the same ID on the Hub and Extender for the Hub Id In . E.g. Hub: Id = B → Extender: Hub Id In = B .
26 Dynaudio Xeo Link The Xeo Link receives wireless signals from a Xeo Hub or Xeo Extender and outputs analog and digital signals from its connections. As a result, you can also connect active subwoofers, active loudspeakers, or other components to the Xeo system.
27 Connecting and establishing a link Hub Link 1. Connect the Power socket to the voltage supply via the Xeo power supply unit. Do not use a different power supply unit! 2. Select an audio zone: Red , Green , or Blue . Use one of the outputs to connect the Xeo Link with one of the active components, e.
28 Dynaudio Malfunctions Interruptions, clicking noises, or other audible interference when playing music is usually not caused by the radio transmission in the Xeo system. Often other external causes inuence the transmission quality . Below are a few tips for improving transmission quality: 1.
29 T echnical data Loudspeakers Xeo 4 Xeo 6 Frequency range (± 3 dB) 45 Hz – 23 kHz 31 Hz – 23 kHz Power consumption during operation 5 – 38 W 7.
30 Dynaudio Reminding This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
31 IC NOTICE This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
All there is . Dynaudio A/S, 8660 Skanderborg, Denmark Sales & Marketing: Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany , Phone: +49 4108 - 41 80 - 0 www .dynaudio.com © Dynaudio Inter national GmbH, Xeo Owner’s Manual 0714 Item No .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Dynaudio XEO 4 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Dynaudio XEO 4 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Dynaudio XEO 4, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Dynaudio XEO 4 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Dynaudio XEO 4, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Dynaudio XEO 4.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Dynaudio XEO 4. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Dynaudio XEO 4 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
