Manuel d'utilisation / d'entretien du produit Charger (2009) du fabricant Dodge
Aller à la page of 484
2009 c h a r g e r CHARGER Chrysler LL C 81-226-0920 Second Edition Printed in U.S.A. OWNER ’S MANU AL 2009 147913 09 OM Dodge LX48Charger.indd 1 9/8/08 3:41:08 PM I n f o r m a t i o n P r o v i d .
VEHICLES SOLD IN CANADA W ith respect to any V ehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor . DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ...........
I n f o r m a t i o n P r o v i d e d b y :.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications/Alterations .
INTRODUCTION This Owner’s Manual has been pr epared with the assis- tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a W arranty Information Booklet and various customer-oriented documents.
INTRODUCTION 5 1 I n f o r m a t i o n P r o v i d e d b y :.
W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entir e manual, you may miss important information.
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
I n f o r m a t i o n P r o v i d e d b y :.
THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W or d About Y our Keys ................. 1 2 ▫ W ir eless Ignition Node (WIN) ............ 1 2 ▫ FOB W ith Integrated Key ............... 1 3 ▫ Ignition Key Removal .................. 1 3 ▫ Key-In-Ignition Reminder .
▫ Programming Additional T ransmitters ...... 2 4 ▫ T ransmitter Battery Service .............. 2 5 ▫ General Information ................... 2 6 䡵 Remote Starting System — If Equipped ....... 2 6 ▫ How T o Use Remote Start ...............
▫ Child Restraints ...................... 6 7 䡵 Engine Break-In Recommendations .......... 7 7 䡵 Safety T ips ........................... 7 8 ▫ T ransporting Passengers ................ 7 8 ▫ Exhaust Gas ......................... 7 8 ▫ Safety Checks Y ou Should Make Inside The V ehicle .
A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Fob with Integrated Key and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the double-sided integrated key into the igni- tion switch with either side up.
Fob with Integrated Key The Fob with Integrated Key (FOBIK) operates the igni- tion switch. It also contains the Remote Keyless Entry (RKE) transmitter and a valet key , which stor es in the r ear of the Fob. The valet key allows for entry into the vehicle should the battery in the vehicle or the Fob go dead.
NOTE: • For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power window switches, radio, power sunroof (if equipped), and power outlets will remain active for 10 minutes after the ignition switch is turned to the LOCK position.
NOTE: The Key-In-Ignition reminder only sounds when the ignition key is placed in the LOCK or ACC position. SENTR Y KEY 姞 The Sentry Key 威 Immobilizer system prevents unautho- rized vehicle operation by disabling the engine. The system does not need to be armed or activated.
• Exxon/Mobil Speedpass™, additional RKE transmit- ters, or any other transponder-equipped components on the same key chain will not cause a fault unless the additional part is physically held against the RKE transmitter being used to start the vehicle.
Customer Key Programming If you have two valid RKE transmitters with integrated keys, you can program new RKE transmitters to the system by performing the following procedur e: 1. Insert the first valid integrated key into the ignition switch and turn the ignition switch to the ON position for at least three seconds, but no longer than 15 seconds.
General Information The Sentry Key 威 system complies with FCC rules Part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interference that may cause undes- ired operation.
the V ehicle Security Alarm will cancel the arming pro- cess. If you wish to rearm the V ehicle Security Alarm after closing the door , you must repeat one of the previously- described arming sequences.
T amper Alert If something has trigger ed the V ehicle Security Alarm in your absence, the horn will sound three times when you disarm the V ehicle Security Alarm.
Remote Key Unlock, Driver Door/All Doors 1st Press This feature lets you pr ogram the system to unlock either the driver’s door or all doors on the first pr ess of the UNLOCK button on the RKE transmitter .
Flash Lights with Remote Key Lock This feature will cause the turn signal lights to flash when the doors ar e locked or unlocked with the RKE transmit- ter .
(Customer-Pr ogrammable Features)” under “Electronic V ehicle Information Center (EVIC) – If Equipped” in Section 4. T o Lock the Doors Press and release the LOCK button on the RKE transmit- ter to lock all doors. The turn signal lights will flash and the horn will chirp to acknowledge the signal.
alarm. Opening a door with the security alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the security alarm. T o Unlatch the T runk Press the TRUNK button on the RKE transmitter two times within five seconds to unlatch the trunk.
T ransmitter Battery Service The recommended replacement battery is one CR2032 battery . NOTE: • Do not touch the battery terminals that are on the back housing or the printed circuit boar d. 1. Battery access is thr ough a door located on the rear of the RKE transmitter .
3. Reposition the access door panel over the battery opening and snap into place. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference.
How to Use Remote Start All of the following conditions must be met before the engine will remote start: • Shift lever in P ARK • Doors closed • Hood closed • T runk closed • Hazard switch o.
T o Exit Remote Start Mode without Driving the V ehicle Press and release the REMOTE ST AR T button one time, or allow the engine to run for the entire 15-minute cycle. NOTE: T o avoid unintentional shut downs, the system will disable the one time press of the REMOTE ST AR T button for two seconds after receiving a valid Remote Start request.
DOOR LOCKS Manual Door Locks T o lock each door , push the door lock plunger on each door trim panel downward. T o unlock each door , pull the door lock plunger on each door trim panel upward. If the door lock plunger is down when you shut the door , the door will lock.
Power Door Locks A power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors. If you pr ess the power door lock switch while the key is in the ignition, and any front door is open, the power locks will not operate.
6. The doors wer e not previously locked using the power door lock switch or Remote Keyless Entry (RKE) transmitter . Automatic Door Locks Programming The Automatic Door Locks feature can be enabled o.
2. The transmission was in gear and the vehicle speed returned to 0 mph (0 km/h). 3. The transmission is in NEUTRAL or P ARK. 4. The driver door is opened.
Child Protection Door Lock T o provide a safer environment for small children riding in the rear seats, the rear doors are equipped with a Child Protection Door Lock system. T o Engage the Child Protection Door Lock System 1. Open the rear door . 2. Insert the tip of the valet key (or similar object) into the child lock control and pull it upwar d.
W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged.
3. Repeat Steps 1 and 2 for the opposite rear door . NOTE: After disengaging the Child Protection Door Lock system, always test the door from the inside to make certain it is in the desired position. WINDOWS Power Windows The window contr ols on the driver’s door control all the door windows.
W ARNING! Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the windows while operating the power window switches. Such entrapment may result in serious injury or death.
AUTO-Up Feature with Anti–Pinch Protection — If Equipped Lift the window switch to the second detent, release, and the window will go up automatically . T o stop the window fr om going all the way up during the AUTO-up operation, push down on the switch briefly .
W ARNING! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. W indow Lockout Switch The window lockout switch on the driver’s door trim panel allows you to disable the window controls on the passenger doors.
Reset Anytime the vehicle battery is disconnected or goes dead, the AUTO-up function will be disabled. T o reactivate the AUTO-up feature, perform the following procedure after vehicle power is restor ed: 1.
The trunk lid can be released from outside the vehicle by pressing the TRUNK button on the Remote Keyless Entry (RKE) transmitter twice within five seconds. W ith the ignition switch in the ON position, the T runk Open symbol will display in the instrument cluster indicating that the trunk is open.
T runk Emergency Release The trunk of your vehicle is equipped with an emer gency release handle. It is located on the inside of the trunk lid, near the latch, and is coated so that it glows in a darkened trunk.
W ARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up. Y ou can strike the interior of your vehicle or other passengers or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly .
W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the front seat. 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries.
W ARNING! (Continued) • A shoulder belt placed behind you will not protect you from injury during a collision. Y ou are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together .
W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as pos- sible and keep it snug. • A twisted belt can’t do its job as well.
Adjustable Upper Shoulder Belt Anchorage In the driver and fr ont passenger seats, the shoulder belt can be adjusted upward or downward to position the belt away from your neck. Push and fully depress the button above the webbing to r elease the anchorage, then move it up or down to the position that fits you best.
3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. 4. Continue to slide the latch plate up until it clears the folded webbing.
BeltAlert 威 will be reactivated if the driver’s seat belt is unbuckled for more than 10 seconds and the vehicle speed is greater than 5 mph (8 km/h).
NOTE: Although BeltAlert 威 has been deactivated, the Seat Belt Reminder Light will continue to illuminate as long as the driver’s seat belt is unbuckled. Automatic Locking Mode — If Equipped In this mode, the shoulder belt is automatically pre- locked.
Seat Belt Extender If a seat belt is too short even when fully extended and when the adjustable upper shoulder belt anchorage (if so equipped) is in its lowest position, your authorized dealer can provide you with a seat belt extender . This extender should be used only if the existing belt is not long enough.
NOTE: The front airbags are certified to the Federal regulations that allow less for ceful deployment. The fr ont airbags have a multistage inflator design. This may allow the airbag to have different rates of inflation that are based on collision severity .
This vehicle may also be equipped with supplemental side curtain airbags to pr otect the driver and passengers sitting next to a window and/or supplemental front seat-mounted side airbags. If the vehicle is equipped with supplemental side curtain airbags, they are located above the side windows.
If the vehicle is equipped with supplemental front seat- mounted side airbags, they are marked with an SRS label sewn into the outboard side of the seat.
W ARNING! (Continued) • If your vehicle is equipped with supplemental side curtain airbags, do not stack luggage or other cargo up high enough to block the location of the side curtain airbag. The area where the side cur- tain airbag is located should remain free from any obstructions.
W ARNING! Infants in rear-facing child restraints should NEVER ride in the front seat of a vehicle with a passenger front airbag. An airbag deployment could cause severe injury or death to infants in that position.
W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly . In some collisions, the airbags won’t deploy at all. Always wear your seat belts even though you have airbags.
• Seat Belt Reminder Light • Knee Impact Bolsters • Front Acceleration Sensors • Driver and Front Passenger Seat Belt Pr etensioners How the Airbag System W orks • The Occupant Restraint Controller (ORC) determines if a frontal collision is severe enough to require the airbags to inflate.
W ARNING! Ignoring the Airbag W arning Light in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away .
inflate the side curtain airbag. The inflating side cur- tain airbag pushes the outside edge of the headliner out of the way and covers the window . The airbag inflates in about 30 ms (about one-quart.
• Do not add a secondary seat cover other than those approved by Chrysler LLC/Mopar 威 . • At no time should any supplemental r estraint sys- tem (SRS) component or SRS-r elated component or fastener be modified or replaced with any part except those which are approved by Chrysler LLC/ Mopar 威 .
However , if you haven’t healed significantly within a few days or if you have any blistering, see your doctor immediately . • As the airbags deflate, you may see some smoke-like particles. The particles ar e a normal by-product of the process that generates the nontoxic gas used for airbag inflation.
• Unlocks the doors automatically . NOTE: The interior lights can only be deactivated if the key is removed from the ignition switch or the vehicle is driven. Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it.
Airbag W arning Light Y ou will want to have the airbags ready to inflate for your protection in an impact. While the airbag system is designed to be mainte- nance free, if any of the following occurs.
investigations may be requested by customers, insurance carriers, government officials, and professional crash resear chers, such as those associated with universities, and with hospital and insurance organizations.
• ⬙ T ime ⬙ of airbag deployment (in terms of ignition cycles and vehicle mileage) • Airbag deployment level (if applicable) • Impact acceleration and angle • Seat belt status • Brake st.
W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a missile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured.
“LA TCH — Child Seat Anchorage System (Lower Anchors and T ether for CHildr en)” in this section. W ARNING! Rearward-facing child seats must NEVER be used in the front seat of a vehicle with the front passenger airbag unless the airbag is turned off.
• The lap portion should be low on the hips and as snug as possible. • Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle.
Here are some tips on getting the most out of your child restraint: • Before buying any restraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. W e also recommend that you make sure that you can install the child restraint in the vehicle where you will use it befor e you buy it.
connection to the top tether anchorages have been avail- able for some time. For some older child restraints, many child restraint manufacturers offer add-on tether strap kits or retrofit kits. Y ou are urged to take advantage of all the available attachments provided with your child re- straint in any vehicle.
Again, carefully follow the installation instructions that are pr ovided with the child restraint system. The rear seat lower anchorages are round bars located at the rear of the seat cushion wher e it meets the seatback and are just visible when you lean into the rear seat to install the child restraint.
NOTE: • Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap. • When using the LA TCH attaching system to install a child restraint, please ensure that all seat belts not being used for occupant restraints are stowed and out of reach of children.
Seat belts with an automatic locking r etractor have a distinctive label on the seat belt webbing. The seat belt must be in the Automatic Locking mode in order to enable a child restraint to be tightly installed. Refer to “Automatic Locking Mode” in this section.
T o attach a child r estraint tether strap: 1. Rotate the cover over the anchor dir ectly behind the seat where you ar e placing the child restraint. 2. Route the tether strap to pr ovide the most direct path for the strap between the anchor and the child seat.
T ransporting Pets Airbags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly injured, or injure a passenger during panic braking or in a collision. Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secur ed by seat belts.
SAFETY TIPS T ransporting Passengers NEVER TRANSPORT P ASSENGERS IN THE CARGO AREA. W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed.
If you are requir ed to drive with the trunk/liftgate open, make sure that all windows are closed and the climate control BLOWER switch is set at high speed. DO NOT use the recir culation mode. The best protection against carbon monoxide entry into the vehicle body is a pr operly maintained engine exhaust system.
Defroster Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should be able to feel the air directed against the windshield.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 8 5 ▫ Inside Day/Night Mirror ................ 8 5 ▫ Automatic Dimming Inside Mirror — If Equipped ........................... 8 6 ▫ Outside Mirrors .
▫ General Information .................. 1 1 7 䡵 V oice Recognition System (VR) — If Equipped .......................... 1 1 7 ▫ V oice Recognition System (VR) Operation . . . 1 17 ▫ Commands ........................ 1 1 9 ▫ V oice T raining .
▫ Interior Lights ...................... 1 3 5 䡵 W indshield W ipers And W ashers .......... 1 3 7 ▫ Intermittent W iper System .............. 1 3 7 ▫ Mist Feature ........................ 1 3 8 ▫ W indshield W ashers .................. 1 3 8 ▫ Headlights On W ith W ipers (A vailable W ith Auto Headlights Only) .
▫ T roubleshooting T ips .................. 1 5 1 ▫ General Information .................. 1 5 2 䡵 Power Sunroof — If Equipped ............ 1 5 2 ▫ Opening Sunroof — Expr ess ............ 1 5 3 ▫ Closing Sunroof — Expr ess ............
MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirr or to center on the view through the r ear window . Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
Automatic Dimming Inside Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirr or . A light next to the button will illuminate to indicate when the dimming feature is activated.
W ARNING! V ehicles and other objects seen in the passenger-side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger-side convex mirror could cause you to collide with another vehicle or other object.
Power Mirrors The power mirror switch is located on the drivers door trim panel next to the power door lock switch. A rotary knob selects the left mirror , right mirror or off position. After selecting a mirror , move the knob in the same direction you want the mirror to move.
uconnect 姞 phone — IF EQUIPPED NOTE: The sales code RER and REU radios contain an integrated uconnect 威 phone. Refer to your “Navigation User’s Manual” for uconnect 威 phone operating instruc- tions for these radios. Radio sales code can be located on the lower right corner of the Radio faceplate.
• www .jeep.com/uconnect • or call 1–877–855–8400 uconnect 威 allows you to transfer calls between the sys- tem and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation.
phone supports a differ ent profile (e.g., Headset Profile) you may not be able to use any uconnect 威 phone features. Refer to your cellular service provider or the phone manufacturer for details. The uconnect 威 phone is fully integrated with the vehi- cle’s audio system.
uconnect 威 phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you. V oice Command T ree Refer to “V oice T ree” in this section. Help Command If you need assistance at any prompt, or if you want to know your options at any prompt, say ⬙ Help ⬙ following the beep.
• When pr ompted, after the beep, say ⬙ Pair a Phone ⬙ and follow the audible prompts. • Y ou will be asked to say a four-digit Personal Identi- fication Number (PIN), which you will later need to enter into your cellular phone. Y ou can enter any four-digit PIN.
• The uconnect 威 phone will confirm the phone number and then dial. The number will appear in the display of certain radios. Call by Saying a Name • Press the PHONE button to begin. • After the ⬙ Ready ⬙ pr ompt and the following beep, say “Call.
• When prompted, enter the number designation (e.g., ⬙ Home, ⬙⬙ W ork, ⬙⬙ Mobile, ⬙ or ⬙ Pager ⬙ ). This will allow you to store multiple numbers for each phonebook entry , if desired. • When prompted, recite the phone number for the phonebook entry that you are adding.
• Depending on the maximum number of entries down- loaded, there may be a short delay before the latest downloaded names can be used. Until then, if avail- able, the pr evious downloaded phonebook is available for use. • Only the phonebook of the currently connected cellu- lar phone is accessible.
first disconnect or drop the Bluetooth 威 connection to the uconnect 威 phone, and then send the addr ess book entry via Bluetooth 威 . Please see your phone Owner ’s Manual for specific instructions on how to drop the Bluetooth 威 connection. • If the phonebook entry is longer than 24 characters, it will only use the first 24 characters.
Delete uconnect 威 Phonebook Entry NOTE: Editing phonebook entries is recommended when the vehicle is not in motion. • Press the PHONE button to begin.
• Note that only the phonebook in the current language is deleted. • Automatic downloaded phonebook entries cannot be deleted or edited. List All Names in the uconnect 威 Phonebook • Press the PHONE button to begin. • After the ⬙ Ready ⬙ pr ompt and the following beep, say ⬙ Phonebook List Names.
call, pr ess and hold the PHONE button until you hear a single beep, indicating that the incoming call was rejected. Answer or Reject an Incoming Call - Call Currently in Progress If a call is curr en.
Conference Call When two calls ar e in progress (one active and one on hold), pr ess and hold the PHONE button until you hear a double beep indicating that the two calls have been joined into one conference call.
• After the ignition key is switched to OFF , a call can continue on the uconnect 威 phone either until the call ends, or until the vehicle battery condition dictates cessation of the call on the uconnect 威 phone and transfer of the call to the cellular phone.
If the phone is not reachable and the uconnect 威 phone is operational, you may reach the emergency number as follows: • Press the PHONE button to begin. • After the ⬙ Ready ⬙ pr ompt and the following beep, say ⬙ Emergency ⬙ and the uconnect 威 phone will instruct the paired cellular phone to call the emergency num- ber .
• After the ⬙ Ready ⬙ pr ompt and the following beep, say ⬙ T owing Assistance. ⬙ NOTE: • The towing assistance number dialed is based on the country where the vehicle is purchased (1-800-528- 2069 for the U.S., 1-877-213-4525 for Canada, 55-14- 3454 for Mexico City and 1-800-712-3040 for outside Mexico City in Mexico).
6 #), you can press the VOICE RECOGNITION button and say , ⬙ 3746# Send. ⬙ Saying a number , or sequence of numbers, followed by ⬙ Send, ⬙ is also to be used for navigating through an automated customer service cen- ter menu structur e, and to leave a number on a pager .
• After the ⬙ Ready ⬙ pr ompt and the following beep, say ⬙ Setup Confirmations. ⬙ The uconnect 威 phone will play the current confirmation prompt status and you will be given the choice to change it.
In order to un-mute the uconnect 威 phone: • Press the VOICE RECOGNITION button. • Following the beep, say ⬙ Mute off. ⬙ Advanced Phone Connectivity T ransfer Call to and from Cellular Phone The uconnect 威 phone allows ongoing calls to be trans- ferred fr om your cellular phone to the uconnect 威 phone without terminating the call.
Select Another Cellular Phone This featur e allows you to select and start using another phone paired with the uconnect 威 phone. • Press the PHONE button to begin. • After the ⬙ Ready ⬙ pr ompt and the following beep, say ⬙ Setup Select Phone ⬙ and follow the prompts.
V oice T raining For users experiencing difficulty with the system recog- nizing their voice commands or numbers, the uconnect 威 phone V oice T raining feature may be used. T o enter this training mode, follow one of the two following proce- dures: From outside the uconnect 威 phone mode (e.
• Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition.
Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather conditions, and • operation from the driver’s seat.
1 12 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 13 3 I n f o r m a t i o n P r o v i d e d b y :.
1 14 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompt.
V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oic.
General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expr essly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
When you press the VR button, you will hear a beep. The beep is your signal to give a command. NOTE: If you do not say a command within a few seconds, the system will pr esent you with a list of options. If you ever wish to interrupt the system while it lists options, press the VR button, listen for the beep, and say your command.
Commands The V oice Recognition system understands two types of commands. Universal commands ar e available at all times. Local commands are available if the supported radio mode is active. Changing the V olume 1. Start a dialogue by pressing the VR button.
Radio FM T o switch to the FM band say “FM” or “Radio FM”. In this mode, you may say the following commands: • “Frequency” (to change the fr equency) • “Next Station” (to select th.
Memo T o switch to the voice r ecorder mode say “Memo”. In this mode, you may say the following commands: • “New Memo” (to r ecord a new memo) — During the recor ding you may pr ess the VR button to stop r ecord- ing.
NOTE: Keep in mind that you have to press the VR button first and wait for the beep before speaking the “Barge In” commands. V oice T raining For users experiencing difficulty with the system recog- nizing their voice commands or numbers, uconnect 威 phone V oice T raining feature may be used.
W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
Power Seats — If Equipped The power seat switch is located on the outboard side of the seat near the floor . Use this switch to move the driver’s seat up or down, forward or rearward or to recline the seatback. The passenger’s seat will move up or down, forward or r earward.
W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.
Lumbar Support — If Equipped This feature allows you to increase or decrease the amount of lumbar support. T urn the control lever for- ward to increase and rearward to decrease the desired amount of lumbar support. Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear .
Heated Seats — If Equipped This feature heats the fr ont driver and passenger seats. The controls for each fr ont seat are located near the bottom center of the instrument panel. Press the switch once to select High-level heat- ing. Press the switch a second time to select Low-level heating.
W ARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, ex- haustion, or other physical conditions must exer- cise care when using the seat heater .
W ARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury .
2. Move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. Use the hood prop rod (if equipped) to secure the hood in the open position. CAUTION! T o prevent possible damage, do not slam the hood to close it.
LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch controls the operation of the headlights, parking lights, instru- ment panel lights, instrument panel light dimming, inte- rior lights and fog lights.
Automatic Headlights — If Equipped This system automatically turns the headlights on or off according to ambient light levels. T o turn the system on, rotate the headlight switch counterclockwise to the AUTO (A) position. When the system is on, the headlight time delay feature is also on.
If you turn the headlights off before the ignition, they will turn off in the normal manner . NOTE: The lights must be turned of f within 45 seconds of turning the ignition OFF to activate this feature. The headlight delay time is programmable on vehicles equipped with the EVIC.
Multifunction Lever The multifunction lever controls the operation of the turn signals, headlight beam selection and passing lights. The multifunction lever is located on the left side of the steering column.
High Beam/Low Beam Select Switch Push the multifunction lever away from you to switch the headlights to high beam. Pull the multifunction lever toward you to switch the headlights back to low beam. Flash-to-Pass Y ou can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you.
because a door is open. This includes the glove box light, but not the trunk light. T o r estore interior light operation, either turn the ignition switch ON or cycle the light switch. Dimmer Control The dimmer control is part of the headlight switch and is located on the left side of the instrument panel.
WINDSHIELD WIPERS AND W ASHERS The multifunction lever operates the windshield wipers and washer when the ignition switch is in the ON position. The lever is located on the left side of the steering column.
wipe interval from a minimum of one cycle every second to a maximum of approximately 23 seconds between cycles. W ARNING! Sudden loss of visibility through the windshield could lead to an accident. Y ou might not see other vehicles or other obstacles.
The “Headlights On with W ipers” featur e can be turned on or of f through the Electr onic V ehicle Information Center (EVIC) (if equipped). Refer to ”Headlights On with W ipers,” under “Personal Settings (Customer- Programmable Features)” under “Electronic V ehicle In- formation Center (EVIC)” in Section 4.
W ARNING! Do not adjust the steering wheel while driving. The telescoping adjustment must be locked while driv- ing. Adjusting the steering wheel while driving or driving without the telescoping adjustment locked could cause the driver to lose control of the vehicle.
• The pedals can be adjusted while driving. • The pedals cannot be adjusted when the transmission is in REVERSE or when the speed control is on. CAUTION! Do not place any article under the adjustable pedals or impede its ability to move as it may cause damage to the pedal controls.
T o Activate Push and release the ON/OFF button located on the end of the Electronic Speed Contr ol lever . The indicator light in the instrument cluster will illuminate to show that the speed control system is on. T o turn the system off, push and release the ON/OFF button again.
• Pull the Electronic Speed Control lever toward you to CANCEL. Pushing and releasing the ON/OFF button or turning off the ignition erases the set speed from memory .
Using Electronic Speed Control on Hills NOTE: The Electronic Speed Contr ol system maintains speed up and down hills. A slight speed change on moderate hills is normal. The automatic transmission will downshift while climb- ing uphill or descending downhill.
OVERHEAD CONSOLE The overhead console contains courtesy/reading lights, an optional universal garage door opener (HomeLink 威 ), storage for sunglasses, and an optional power sunroof switch. Courtesy/Reading Lights At the forward end of the console are two courtesy/ reading lights.
GARAGE DOOR OPENER — IF EQUIPPED HomeLink 威 replaces up to three remote controls (hand- held transmitters) that operate devices such as garage door openers, motorized gates, lighting, or home security systems. The HomeLink 威 unit operates off your vehicle’s battery .
W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people or pets are in the path of the door or gate. Only use this trans- ceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety standards.
2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) from the HomeLink 威 buttons while keeping the EVIC display in view . For optimal training, point the battery end of the hand- held transmitter away from the HomeLink 威 .
This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open and close the door). 6. Firmly press and release the “learn” or “training” button. The name and color of the button may vary by manufacturer .
Gate Operator/Canadian Programming Canadian radio-frequency laws requir e transmitter sig- nals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink 威 to pick up the signal during programming.
Reprogramming A Single HomeLink 姞 Button T o r eprogram a channel that has been previously trained, follow these steps: 1. T urn the ignition switch to the ON/RUN position. 2. Press and hold the desired HomeLink 威 button for 20 seconds until the EVIC display states “CHANNEL # TRAINING.
General Information This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2.
W ARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
sunroof will automatically retract. Remove the obstruc- tion if this occurs. Next, press the switch forward and release to Expr ess Close. Pinch Protect Override If a known obstruction (ice, debris, etc.) prevents closing, press the switch forward and hold for two seconds after the reversal occurs.
Sunroof Maintenance Use only a nonabrasive cleaner and a soft cloth to clean the glass panel. Ignition Off Operation For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power sunroof switch will remain active for 10 minutes after the ignition switch is turned OFF .
NOTE: If desired, the power outlet next to the ash receiver tray (if equipped) can be converted by your authorized dealer to provide power with the ignition switch in the LOCK position. The center console outlet is powered directly from the battery (power available at all times).
W ARNING! T o avoid serious injury or death: • Do not use a three-prong adapter . • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
CAUTION! (Continued) • Power outlets are designed for accessory plugs only . Do not hang any type of accessory or acces- sory bracket from the plug. Improper use of the power outlet can cause damage. CUPHOLDERS Front Seat Cupholders The cupholders are located in the forward edge of the center console.
Rear Seat Cupholders The rear seat cupholders are located in the center armr est between the rear seats. The cupholders are positioned forward in the armrest and side-by-side to provide convenient access to beverage cans or bottles while maintaining a r esting place for the r ear occupants elbows.
W ithout V ehicle Entertainment System (VES 威 ) T wo separate storage compartments are also located underneath the armrest. 1 — Release button for bottom compartment 2 — Release button for top compartment 3 — T op Compartment 4 — Bottom Compartment.
The top compartment holds small items, such as a pen and note pad, while the larger bottom compartment will hold CDs and alike. The bottom compartment also con- tains a 12-V olt power outlet and a molded-in coin holder (designed to hold various size coins).
W ARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury .
W ARNING! (Continued) • Place as much cargo as possible in front of the rear axle. T oo much weight or improperly placed weight over or behind the rear axle can cause the rear of the vehicle to sway . • Do not pile luggage or cargo higher than the top of the seatback.
LOAD LEVELING SYSTEM — IF EQUIPPED The automatic load leveling system will provide a level- riding vehicle under most passenger and cargo loading conditions. A hydraulic pump contained within the shock absorbers raises the rear of the vehicle to the correct height.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Features ............... 1 6 9 䡵 Instrument Cluster – Base ............... 1 7 0 䡵 Instrument Cluster – Premium ............ 1 7 1 䡵 Instrument Cluster Descriptions ........
▫ Operating Instructions - Radio Mode ...... 1 9 8 ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play , DVD-V ideo) . . . 206 ▫ Notes On Playing MP3/WMA Files ....... 2 0 8 ▫ List Button (Disc Mode For MP3/WMA Play) ..........
▫ Info Button (CD Mode For MP3 Play) ...... 2 3 5 䡵 Universal Consumer Interface (UCI) — If Equipped ............................ 2 3 6 ▫ Connecting The iPod 威 ................. 2 3 7 ▫ Using This Feature ................... 2 3 7 ▫ Controlling The iPod 威 Using Radio Buttons .
䡵 V ideo Entertainment System (VES)™ — If Equipped .......................... 2 4 8 䡵 Remote Sound System Controls ........... 2 5 0 䡵 CD/DVD Maintenance ................. 2 5 2 䡵 Radio Operation And Cellular Phones ....... 2 5 2 䡵 Climate Controls .
INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 7 — Climate Contr ol 13 — Hood Release 2 — Instrument Cluster 8 — Heated Seat Switch* 14 — T runk Release Switch 3 — Hazard Switch 9 — Power .
INSTRUMENT CLUSTER – BASE 170 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :.
INSTRUMENT CLUSTER – PREMIUM UNDERST ANDING YOUR INSTRUMENT P ANEL 171 4 I n f o r m a t i o n P r o v i d e d b y :.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. T rip Odometer Button Base Cluster The wor d ⬙ TRIP ⬙ will appear when this button is pressed.
6. Charging System Light This light shows the status of the electrical char g- ing system. The light should come on when the ignition switch is first turned ON and r emain on briefly as a bulb check.
The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather , up mountain grades, or when towing a trailer . It should not be allowed to exceed the upper limits of the normal operating range. CAUTION! Driving with a hot engine cooling system could damage your vehicle.
10. Airbag W arning Light This light will turn on for six to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is either not on during starting, or stays on, or turns on while driving, then have the system inspected at an authorized dealer as soon as possible.
14. Oil Pressure W arning Light This light indicates low engine oil pressur e. The light should turn on momentarily when the engine is started. If the light turns on while driving, stop the vehicle, and shut OFF the engine as soon as possible. A single chime will sound when this light turns on.
19. Odometer/T rip Odometer Display / Electronic V ehicle Information Center (EVIC) Display — If Equipped The odometer shows the total distance the vehicle has been driven. The trip odometer shows individual trip mileage. Refer to “T rip Odometer Button” for additional information.
Unless r eset, this message will continue to display each time you turn the ignition switch to the ON position. T o turn of f the message temporarily , press and release the TRIP ODOMETER button on the instrument cluster . T o reset the oil change indicator system (after performing the scheduled maintenance) perform the following pro- cedure: 1.
Refer to “Electronic V ehicle Information Center (EVIC)” in this section for more information. 20. Brake W arning Light This light monitors various brake functions, including brake fluid level and parking brake application.
W ARNING! Driving a vehicle with the brake light on is danger - ous. Part of the brake system may have failed. It will take longer to stop the vehicle. Y ou could have an accident. Have the vehicle checked immediately . V ehicles equipped with the Anti-Lock Brake System (ABS), are also equipped with Electronic Brake Force Distribution (EBD).
As an added safety feature, your vehicle has been equipped with a T ire Pressur e Monitoring System (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under -inflated.
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style.
25. Malfunction Indicator Light (MIL) The Malfunction Indicator Light (MIL) is part of an onboard diagnostic system called OBD. The OBD system monitors engine and automatic transmission control systems. The MIL will turn on when the key is in the ON position before engine start.
This system allows the driver to select a variety of useful information by pressing the switches mounted on the steering wheel. The EVIC consists of the following: • System status • V ehicle infor.
Press the SCROLL button to scroll thr ough T rip Functions, Navigation (if equipped), System Status Messages, and Personal Settings (Customer-Pr ogrammable Features). The SCROLL button also functions as a remote sound system control. Refer to “Remote Sound System Controls” in this section.
• Left/Right Front Door Ajar (one or mor e, with a single chime if speed is above 1 mph [1.6 km/h]) • Left/Right Rear Door Ajar (one or more, with a single chime if speed is above 1 mph [1.
Unless r eset, this message will continue to display each time you turn the ignition switch to the ON position. T o turn of f the message temporarily , press and release the MENU button. T o reset the oil change indicator system (after performing the scheduled maintenance) perform the following procedur e: 1.
The T rip Functions mode displays the following. • A verage Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will r ead “RESET” or show dashes for two seconds.
• Display Units of Measure in T o make your selection, press and release the FUNC- TION SELECT button until “US” or “METRIC” appears. T o Reset The Display Reset will only occur while a resettable function is being displayed. Press and release the FUNCTION SELECT button once to clear the resettable function being dis- played.
When the vehicle automatically transitions from A WD to R WD the EVIC will display the following message for five seconds. Refer to “All Wheel Drive — If Equipped” in Section 5 for more information on the All Wheel Drive (A WD) system. Compass Display The compass readings indicate the direction the vehicle is facing.
Manual Compass Calibration If the compass appears erratic and the “CAL” message does not appear in the EVIC display , you must put the compass into the Calibration Mode manually as follows: 1. T urn the ignition switch ON. 2. Press and hold the COMP ASS button for approxi- mately two seconds.
NOTE: Keep magnetic materials away from the top of the instrument panel, such as iPod’s, Cell Phones, Lap- tops and Radar Detectors. This is where the compass module is located, and it can cause interfer ence with the compass sensor , and it may give false readings.
While in the Surround Sound menu, press the FUNC- TION SELECT button to change surround modes. uconnect 姞 gps (Navigation) — If Equipped uconnect 威 gps (Navigation) Display Control Press and release the MENU button until Navigation displays in the EVIC.
“Language” When in this display you may select one of five lan- guages for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the FUNCTION SELECT button while in this display to select English, Espanol, Deutsch, Italiano, or Francais.
“Sound Horn with Remote Key Lock” When ON is selected, a short horn sound will occur when the RKE transmitter LOCK button is pressed. This feature may be selected with or without the flash lights on lock/unlock feature. T o make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears.
“T urn Headlights On with Remote Key Unlock” When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are unlocked with the RKE transmitter . T o make your selec- tion, press and release the FUNCTION SELECT button until “OFF ,” “30 sec.
“T urn-by-T urn Navigation” — If Equipped When ON is selected, the turn-by-turn directions will appear in the display as the vehicle appr oaches a desig- nated turn within a programmed route. T o make your selection, pr ess and release the FUNCTION SELECT button until “ON” or “OFF” appears.
Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio.
Phone Button uconnect 威 phone — If Equipped Press this button to operate the uconnect 威 phone feature (if equipped). Refer to “uconnect 威 phone” in Section 3. If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith uconnect” message will display on the radio screen.
TUNE Control T urn the r otary TUNE/SCROLL control knob clockwise to incr ease or counterclockwise to decrease the frequency . Setting the T one, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display . T urn the TUNE/SCROLL control knob to the right or left to increase or decr ease the bass tones.
T oggle the MUSIC TYPE button to select the following format types: Program T ype 16-Digit Character Display No program type or un- defined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls.
By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next fr equency station with the same selected Music T ype name.
• Angle – Repeatedly pressing SELECT will change the viewing angle if supported by the DVD disc (if equipped). NOTE: • The available selections for each of the above entries varies depending upon the disc. • These selections can only be made while playing a DVD.
Audio Language — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc).
a disc is loaded, changes will not be effective. Also, the defaults are effective only if the disc supports the customer-pr eferred settings. AM and FM Buttons Press the buttons to select AM or FM mode.
Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play , DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These region codes must match in order for the disc to play . If the region code for the DVD disc does not match the region code for the radio DVD player , it will not play the disc.
Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton with the corresponding number (1-6) where the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to r emove the disc.
Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however , acceptable MP3/WMA file r ecording media and formats ar e limited. When writing MP3/WMA files, pay attention to the following restrictions.
If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.
Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take mor e time to start playing the MP3/WMA files.
Press and hold the INFO button again for thr ee seconds to return to ⬙ elapsed time ⬙ display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows.
Operating Instructions — V oice Recognition System (VR) (If Equipped) For the radio, refer to “V oice Recognition System (VR)” in Section 3. For uconnect 威 “V oice Recognition System (VR),” refer to “uconnect 威 phone” in Section 3.
AM/FM/CD/DVD RADIO (RER/REN) – IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The REN and RER radios contain a CD/DVD player , USB port, and a 30-gigabyte hard drive (HDD). Sirius Satellite Radio is optional.
4. T o move the hour forward, touch the screen where the word “Hour” with the arrow pointing upward is dis- played. T o move the hour backward, touch the screen where the word “Hour” with the arr ow pointing down- ward is displayed.
Changing the T ime Zone 1. T urn on the radio. 2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. T ouch the screen where the words “Set T ime Zone” ar e displayed. The time zone selection menu will appear on the screen.
Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save time change. 5. T o exit, press any button/knob, or wait five seconds. R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arrows.
Push the r otary TUNE/SCROLL control knob again to exit setting tone, balance, and fade. AM/FM Button Press the buttons to select either AM or FM mode. SET/RND Button — T o Set the Pushbutton Memory When you ar e r eceiving a station that you wish to commit to pushbutton memory , press the SET/RND button.
Operation Instructions — CD MODE For CD And MP3 Audio Play NOTE: • The ignition switch must be in the ON or ACC position to operate the radio. • This radio is capable of playing compact discs (C.
EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF .
SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Press the right SEEK button to move to the next ran- domly selected track.
exceeding 20 folders will r esult in this display . W ith 200 files, exceeding 50 folders will result in this display .) • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙ . ⬙ and a three- character extension) • Level 2: 31 (including a separator ⬙ .
MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags.
MP3 player , or cassette player , and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pressing the DISC/AUX button will change the mode to auxiliary device if the AUX jack is connected. NOTE: The AUX device must be turned on and the device’s volume set to proper level.
Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith uconnect” message will display on the radio screen. TIME Button Press the TIME button to alternate locations of the time and frequency display .
TUNE Control T urn the r otary TUNE/SCROLL control knob clockwise to incr ease or counterclockwise to decrease the frequency . Setting the T one, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display . T urn the TUNE/SCROLL control knob to the right or left to increase or decr ease the bass tones.
T oggle the MUSIC TYPE button to select the following format types: Program T ype 16-Digit Character Display No program type or un- defined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls.
By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next fr equency station with the same selected Music T ype name.
and 12 FM stations to be stor ed into pushbutton memory . The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display . Button s1-6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations).
CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player .
R W/FF Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pressed. The R W (Reverse) button works in a similar manner . AM/FM Button Press the button to select either AM or FM mode.
• Maximum number of files: 255 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a number instead.
MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags.
LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob.
TIME Button (Auxiliary Mode) Press this button to change the display to time of day . The time of day will display for five seconds (when the ignition is OFF). Operating Instructions - uconnect 威 phone (If Equipped) Refer to “uconnect 威 phone” in Section 3.
• Connecting an iPod 威 to the AUX port located in the radio faceplate, plays media, but does not use the UCI feature to contr ol the connected device. Connecting The iPod 姞 Use the optional connection cable to connect an iPod 威 to the vehicle’s 16–pin connector port (which is located in the glove compartment on some vehicles).
Once in the UCI (iPod 威 ) mode, iPod 威 audio tracks (if available from iPod 威 ) start playing over the vehicle’s audio system. Play Mode When switched to UCI mode, the iPod 威 automatically starts Play mode.
• While a track is playing, press the INFO button to see the associated metadata (Artist, track title, album, etc.) for that track. Pr essing the INFO button again jumps to the next scr een of data for that track. Once you have seen all screens, the last INFO button pr ess will take you back to the play mode screen on the radio.
• During all List modes, the iPod 威 displays all lists in “wrap-around” mode. So if the track is at the bottom of the list just turn the wheel backwards (counter-clockwise) to get to the track faster . • In List mode, the radio PRESET Buttons are used as shortcuts to the following lists on the iPod 威 .
CAUTION! • Leaving the iPod 威 (or any supported device) any- where in the vehicle in extreme heat or cold can alter the operation, or damage the device. Follow the device manufacturer ’ s guidelines. • Placing items on the iPod 威 , or connections to the iPod 威 in the vehicle, can cause damage to the device and/or to the connectors.
how to setup your on-line listening account at no addi- tional charge. For further information, call the toll-free number 888-539-7474, or visit the Sirius web site at www .
Selecting uconnect 姞 studios (Satellite) Mode Press the SA T button until ⬙ SA T ⬙ appears in the display . A CD may remain in the radio while in the Satellite radio mode.
SCAN Button (When Equipped) Pressing the SCAN button causes the tuner to search for the next channel, pausing for eight seconds before con- tinuing to the next.
By pr essing the SEEK button when the Music T ype function is active, the radio will be tuned to the next channel with the same selected Music T ype name. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radio will tune to the preset channel.
Y ou may add a second channel to each pushbutton by repeating the above pr ocedure with this exception: Press the SET button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2. This allows a total of 12 Satellite channels to be stored into pushbutton memory .
Y our vehicle is equipped with a state of the art audio amplifier that provides 5.1-channel surround sound fr om any stereo audio source. A new feature of the Kicker 威 audio system offers the ability to choose surround sound for any audio source. “Audio Surround” is optimized for front seat passengers for any audio source.
VIDEO ENTERT AINMENT SYSTEM (VES)™ — IF EQUIPPED The optional V ideo Entertainment System (VES)™ in- cludes the following components for r ear seat entertain- ment: • A diagonal 7 in (17.8 cm) Liquid Crystal Display (LCD) screen integrated into the center console armrest.
• The LCD screen swings up from the rear of the armr est to allow the rear seat passenger(s) to view the display . NOTE: Close the armrest after the LCD screen has been raised to its viewing position. • The radio and DVD player controls allow front seat operation for easy setup in the case of younger rear seat passengers.
• T wo wireless infrared headsets allow rear seat passen- gers to listen to the same or individual audio sources. Audio/V ideo RCA Jacks (AUX Jacks) on the rear of the center console enable the monitor to display video directly from a video camera, connect video games for display on the screen, or play music dir ectly from an MP3 player .
V ehicles equipped with steering wheel-mounted buttons are also equipped with the Electr onic V ehicle Information Center (EVIC). The EVIC features a driver-interactive display which is located in the instrument cluster . The VOLUME button contr ols the sound level of the sound system.
CD/DVD MAINTENANCE T o keep a CD/DVD in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper or tape to the disc; avoid scratch- ing the disc.
CLIMA TE CONTROLS The air conditioning and heating system is designed to make you comfortable in all types of weather . Manual Air Conditioning and Heating System Blower Control The rotary knob on the left contr ols the blower . The control has an OFF posi- tion and four speed settings.
T emperature Control The r otary knob in the center controls air temperature. Rotate the contr ol to the left for cooler air temperatur e and to the right for warmer air tempera- ture. Rotating the control to the ex- treme left provides the coldest setting.
• Bi-Level Air flows thr ough the outlets located in the instru- ment panel and through the outlets located on the floor . Air flows through the registers in the back of the center console to the rear seat passengers. These registers can be closed to partially block airflow .
Automatic T emperature Control — If Equipped Automatic Operation The Dual-Zone Climate Control System automatically maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger . Operation of the system is quite simple.
72°F (22°C) is the recommended setting for maximum comfort for the average person; however , this may vary . NOTE: The temperature setting can be adjusted at any time without affecting automatic operation. Air conditioning in this system is automatic.
Attempting to use the recir culation while in these modes will cause the indicator in the control button to blink and then turn off. Manual Operation This system offers a full complement of manual override features, which consist of blower preferred automatic, mode preferr ed automatic, or blower and mode preferred automatic.
UNDERST ANDING YOUR INSTRUMENT P ANEL 259 4 I n f o r m a t i o n P r o v i d e d b y :.
The operator can override the AUTO mode setting to change airflow distribution by rotating the mode contr ol knob (on the right) to one of the following positions. • Defrost Air is directed to the windshield through the outlets at the base of the windshield.
conditioning. An indicator in the button illuminates when manual compressor operation is selected. NOTE: T o control the air conditioning manually , the mode selector must be moved out of the AUT O position. • Recirculation Contr ol This button can be used to block out smoke, odors, dust, high humidity , or if rapid cooling is desired.
W inter Operation Use of the air Recirculation mode during W inter months is not recommended because it may cause window fogging. V acation Storage Any time you store your vehicle or keep it out of service (i.e., vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in the fresh air and high blower setting.
Control Setting Suggestions for V arious W eather Conditions UNDERST ANDING YOUR INSTRUMENT P ANEL 263 4 I n f o r m a t i o n P r o v i d e d b y :.
I n f o r m a t i o n P r o v i d e d b y :.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 6 9 ▫ Automatic T ransmission ............... 2 6 9 ▫ Normal Starting (T ip Start) ............. 2 7 0 䡵 Engine Block Heater — If Equipped ........ 2 7 2 䡵 Automatic T ransmission .
䡵 Driving Through W ater ................. 2 8 8 ▫ Flowing/Rising W ater ................. 2 8 9 ▫ Shallow Standing W ater ............... 2 8 9 䡵 Power Steering ....................... 2 9 1 ▫ Power Steering Fluid Check ............. 2 9 1 䡵 Parking Brake .
▫ T ir e Spinning ....................... 3 1 5 ▫ T read W ear Indicators ................. 3 1 6 ▫ Life Of T ir e ........................ 3 1 6 ▫ Replacement T ir es .................... 3 1 7 䡵 Self-Sealing T ir es — If Equipped .......
䡵 V ehicle Loading ...................... 3 4 0 ▫ V ehicle Certification Label .............. 3 4 0 ▫ Gross V ehicle W eight Rating (GVWR) ...... 3 4 0 ▫ Gross Axle W eight Rating (GA WR) ........ 3 4 0 ▫ Overloading ........................
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirr ors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. W ARNING! • Never leave children alone in a vehicle.
CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
If Engine Fails T o Start W ARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury . (Continued) W ARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started.
release it as soon as the starter engages. The starter motor will disengage automatically in 10 seconds. Once this occurs, release the accelerator pedal, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the normal starting pr ocedure.
AUTOMA TIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
• Shift lever position • Accelerator position • V ehicle speed The gear shifting process is continuously adapted, de- pendent on the driving style, the driving situation, and the road characteristics.
W ARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the transmission into P ARK, remove the key from the ignition, and apply the parking brake.
located to the right of the shift lever . The override access port is at the top of the bin to the right of the shift lever gate. T o activate the override, first insert the key into the ignition switch and turn it to the ON position. Then, press the pink-colored tab through the access port with a small flat blade scr ewdriver or alike.
Gear Ranges P ARK P ARK supplements the parking brake by locking the transmission. The engine can be started in this range. Never use P ARK while the vehicle is in motion.
The following indicators should be used to ensure that you have engaged the shift lever in the P ARK position: • When shifting into P ARK move the shift lever all the way forward and left until it stops and is fully seated. • Look at the shift indicator display on the instrument panel to ensure it is in the P position.
shifts and the best fuel economy . Select the “3” range when fr equent transmission shifting occurs when using the Overdrive range, such as when operating the vehicle under heavy loading conditions (in hilly terrain, travel- ing into strong head winds, or while towing heavy trailers).
CAUTION! Never race the engine with the brakes on and the vehicle in gear , and never hold the vehicle on an incline without applying the brakes. These practices can cause overheating and damage to the transmis- sion. T orque Converter Clutch A feature designed to improve fuel economy has been added to the automatic transmission in this vehicle.
T ransmission Limp Home Mode The transmission is monitor ed for abnormal conditions. If a condition is detected that could cause damage, the transmission automatically shifts into second gear . The transmission remains in second gear despite the forward gear selected.
5-Speed Automatic T ransmission Shifting fr om DRIVE to P ARK or REVERSE should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when moving the shift lever between these gears.
W ARNING! Never use P ARK position on an automatic transmis- sion as a substitute for the parking brake. Always apply parking brake fully when parked to guard against vehicle movement and possible injury or damage.
CAUTION! Coasting the vehicle or driving for any other reason with the shift lever in NEUTRAL can result in transmission damage. W ARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions.
T emporary T ransmission Limp Home Mode The transmission is monitor ed for abnormal conditions. If a condition is detected that could r esult in transmission damage, the transmission will engage Limp Home Mode. If vehicle acceleration worsens, or the transmission no longer shifts, the transmission is most likely operating in the Limp Home Mode.
AUTOSTICK 姞 — IF EQUIPPED Autostick 威 is a driver-interactive transmission that offers manual gear shifting to provide you with mor e contr ol of the vehicle. Autostick 威 allows you to maximize engine braking, eliminate undesirable upshifts and downshifts, and improve overall vehicle performance.
vehicle automatically shifts into A WD mode. Automatic A WD operation could be activated by outside tempera- ture, wheel slip, or other predetermined conditions (ther e may be a slight delay for A WD engagement after a wheel slip condition occurs).
W ARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the rear wheels. Y ou could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow , wet mud, loose sand, etc.
Flowing/Rising W ater W ARNING! Do not drive on or cross a road or a path where water is flowing and/or rising (as in storm run-off). Flow- ing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water . Furthermore, flowing and/or rising water can carry your vehicle away swiftly .
CAUTION! (Continued) • Driving through standing water may cause dam- age to your vehicle’ s drivetrain components. Al- ways inspect your vehicle’ s fluids (i.e., engine oil, transmission/transaxle, axle, etc.) for signs of con- tamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water .
POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will pr ovide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle.
apparent, and/or the system is not functioning as antici- pated. Coordinate inspection efforts through an autho- rized dealer . No chemical flushes should be used in any power steering system; only the approved lubricant may be used.
P ARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. The foot operated parking brake is positioned below the lower left corner of the instrument panel. T o apply the parking brake, push the parking brake pedal down and then remove your foot from the pedal.
W ARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Do not leave the key in the ignition. A child could operate power win- dows, other controls, or move the vehicle.
Y ou also may experience the following when the brake system goes into Anti-Lock: • The ABS motor running (it may continue to run for a short time after the stop), • The clicking sound of solenoid valves, • Brake pedal pulsations, and • A slight dr op or fall away of the brake pedal at the end of the stop.
W ARNING! (Continued) • The ABS cannot prevent the natural laws of phys- ics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that af- forded by the condition of the vehicle brakes and tires or the traction afforded.
W ARNING! The ABS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The ABS cannot prevent accidents, including those re- sulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
W ARNING! The BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The BAS cannot prevent accidents, including those re- sulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
flashes when the TCS is active. If the ESP/TCS Indicator Light begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible.
ESP on again, momentarily depress the ESP OFF switch and the “ESP/TCS Indicator Light” will turn off. NOTE: T o improve the vehicle’s traction when driving with snow chains, or when starting off in deep snow , sand, or gravel, it may be desirable to switch to the “Partial Off” mode by momentarily depressing the ESP OFF switch.
ESP is synchronized (refer to Synchronizing ESP), see your authorized dealer as soon as possible to have the problem diagnosed and corr ected. NOTE: • The ESP/TCS Indicator Light and the ESP/BAS Mal- function Indicator Light will turn on momentarily each time the ignition switch is turned ON.
NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall pr eceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on Eur opean design standards.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light truck tir e based on U.
EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can ca.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The pr oper cold tire inflation pressure is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard tel.
axles must not be exceeded. For further information on GA WRs, vehicle loading, and trailer towing, refer to “V ehicle Loading” in this section. T o determine the maximum loading conditions of you.
NOTE: • The following table shows examples on how to calcu- late total load, cargo/luggage, and towing capacities of your vehicle with varying seating configurations and number and size of occupants. This table is for illustration purposes only and may not be accurate for the seating and load carry capacity of your vehicle.
ST ARTING AND OPERA TING 309 5 I n f o r m a t i o n P r o v i d e d b y :.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pressur es can cause uneven wear patterns to develop across the tire tread.
CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placar d ar e always “cold tire inflation pressure.
loading may be required for high-speed vehicle opera- tion. Refer to original equipment or an authorized tire dealer for r ecommended safe operating speeds, loading and cold tire inflation pr essures. W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous.
vehicle only . Since this tire has limited tread life, the original tire should be repaired (or replaced) and rein- stalled at the first opportunity . W ARNING! T emporary use spare tires are for emergency use only . W ith these tires, do not drive more than 50 mph (80 km/h).
W ARNING! The limited-use spare tires are for emergency use only . Installation of this limited-use spare tire af fects vehicle handling. With this tire, do not drive more than 50 mph (80 km/h). Keep inflated to the cold tire inflation pressure listed on either your tire placard or limited-use spare tire and wheel assembly .
T read W ear Indicators T r ead wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm).
W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have an accident resulting in serious injury or death.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
TIRE CHAINS Use only compact chains or other traction aids that meet SAE type “Class S” specifications. Chains must be the proper size for the vehicle, as recommended by the chain manufacturer . In addition, only install tire chains on P215/65 R17 and P225/60 R18 size tires.
CAUTION! (Continued) • Observe the tire chain manufacturer’s instructions on the method of installation, operating speed, and conditions for use. Always use the lower suggested operating speed of the chain manufac- turer if different from the speed recommended by the manufacture.
TIRE ROT A TION RECOMMENDA TIONS T ir es on the front and rear axles of vehicles operate at differ ent loads and perform differ ent steering, driving, and braking functions. For these r easons, they wear at unequal rates and tend to develop irregular wear pat- terns.
TIRE PRESSURE MONITOR SYSTEM (TPMS) The T ire Pressure Monitor System (TPMS) will warn the driver of a low tire pr essure based on the vehicle recom- mended cold placard pr essure. The tir e pressur e will vary with temperatur e by about 1 psi (6.9 kPa) for every 12°F (6.
For example, your vehicle may have a recommended cold (parked for more than three hours) placard pressur e of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measur ed tire pressur e is 27 psi (186 kPa), a temperature dr op to 20°F (-7°C) will decrease the tir e pressur e to approximately 23 psi (158 kPa).
NOTE: • The TPMS is not intended to replace normal tire car e and maintenance or to pr ovide warning of a tir e failure or condition. • The TPMS should not be used as a tire pressure gauge while adjusting your tire pr essure. • Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure.
The matching full size spare wheel and tir e assembly (if equipped) has a TPM sensor . The matching full size spare can be used in place of any of the four road tires. The TPMS will only monitor the pr essure in the full size spare when it is used in place of a road tire.
3. Accumulation of snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors. NOTE: V ehicles with Full Size Spare 1. The matching full size spare wheel and tir e assembly has a TPM sensor that can be monitored by the TPMS.
5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically and the TPM T elltale Light will turn OFF , as long as no tire pr essure is below the low-pressur e warning limit in any of the four active road tires.
T ire Pressure Monitoring Low Pressure W arnings The TPM T elltale Light will illuminate in the instrument cluster and a chime will sound when tire pressure is low in one or more of the four active r oad tires.
turn of f. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Check TPMS W arning If a system fault is detected, the TPM T elltale Light will flash on and off for 75 seconds and then r emain on solid.
If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the TPM T elltale Light will no longer flash, and the ⬙ CHECK TPM SYSTEM ⬙ message will no longer display , and a pressure value will display in place of the dashes.
NOTE: V ehicles with Compact Spare 1. The compact spar e tire does not have a TPM sensor . Therefor e, the TPMS will not monitor the pressur e in the compact spare tir e.
General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
The use of pr emium gasoline is not recommended, as it will not provide any benefit over regular gasoline in these engines. Light spark knock at low engine speeds is not harmful to your engine. However , continued heavy spark knock at high speeds can cause damage and immediate service is requir ed.
CAUTION! DO NOT use gasolines containing Methanol or E85 Ethanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system components. Problems that result from using methanol/gasoline or E85 ethanol blends are not the responsibility of the manufacturer .
MMT In Gasoline MMT is a manganese-containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT . Gasoline blended with MMT reduces spark plug life and reduces emissions system performance in some vehicles.
• The use of fuel additives, which are now being sold as octane enhancers, is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of the manufactur er .
ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door on the left side of the vehicle. If so equipped, use the finger pull to open the door . Otherwise, push in on the left side (near the edge) of the fuel filler door to access the fuel filler cap.
NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door reinfor cement. CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap).
W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel to the vehicle when the engine is running. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle.
VEHICLE LOADING The load carrying capacity of your vehicle is shown on the “V ehicle Certification Label.” This information should be used for passenger and luggage loading as indicated. Do not exceed the specified Gross V ehicle W eight Rating (GVWR) or the Gross Axle W eight Rating (GA WR).
W ARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either rating is exceeded. Y ou could lose control of the vehicle and have an accident.
NOTE: • Refer to the “V ehicle Certification Label” affixed to the rear of the driver’s door for your vehicle’s GVWR and GA WRs. • Refer to the “T ir e Placar d” for your vehicle’s proper tire pr essure.
Gross Combination W eight Rating (GCWR) The GCWR is the total permissible weight of your vehicle and trailer when weighed in combination. (Note that GCWR ratings include a 150 lbs [68 kg] allowance for the presence of a driver .) Gross Axle W eight Rating (GA WR) The GA WR is the maximum capacity of the front and r ear axles.
of hitches are the most popular on the market today and they are commonly used to tow small- and medium- sized trailers. W eight-Distributing Hitch A weight-distributing system works by applying lever- age through spring (load) bars.
The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition.
T railer T owing W eights (Maximum T railer W eight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/T ransmission Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. ( 〫 see note) 2.
T railer and T ongue W eight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle.
Consider the following items when computing the weight on the rear axle of the vehicle: • The tongue weight of the trailer . • The weight of any other type of cargo or equipment put in or on your vehicle. • The weight of the driver and all passengers.
W ARNING! (Continued) Make certain that the load is secured in the trailer and it will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. Y ou could lose control of your vehicle and have an accident.
T owing Requirements — T ires − Do not attempt to tow a trailer while using a compact spare tir e. − Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle. Refer to “T ir es–General Information” in this section for infor- mation on tire pressures and for pr oper tire inflation procedur es.
CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes, and they should be of adequate capacity . Failure to do this could lead to accelerated brake lining wear , higher brake pedal effort, and longer stopping distances.
The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustrations.
T owing Tips Before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away fr om heavy traffic. T owing T ips — Automatic T ransmission The DRIVE range can be selected when towing. How- ever , if frequent shifting occurs while in this range, the “3” range should be selected.
− Extended driving at high RPM should be avoided to prevent excess heat generation. A r eduction in vehicle speed may be required to avoid extended driving at high RPM. Return to a higher gear range or vehicle speed when road conditions and RPM level allows.
WHA T TO DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 3 5 6 䡵 If Y our Engine Overheats ................ 3 5 6 䡵 Jacking And T ire Changing ............... 3 5 7 ▫ Jack Location/Spare T ire Stowage ........ 3 5 8 ▫ Preparations For Jacking .
HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located in the switch bank near the top center of the instrument panel. Press the switch to turn on the Hazard W arning flashers. When the Hazard W arning flasher switch is activated, all dir ectional turn signals will flash on and off to warn oncoming traffic of an emergency .
CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads “H,” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H,” turn the engine of f immediately and call for service.
W ARNING! (Continued) • The jack is designed to use as a tool for changing tires only . The jack should not be used to lift the vehicle for service purposes.
4. Remove the spare tire. 5. Remove the fastener securing the jack. W ARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the ve- hicle. Always stow the jack parts and the spare tire in the places provided.
Preparations For Jacking 6. Park the vehicle on a firm level surface as far from the edge of the roadway as possible. A void icy or slippery areas. 7. Set the parking brake. 8. Place the shift lever into P ARK. 9. T urn OFF the ignition. 10. T urn on the Hazard W arning flashers.
W ARNING! (Continued) • Never start or run the engine with the vehicle on a jack. • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. • Only use the jack in the positions indicated and for lifting this vehicle during a tire change.
2. If equipped with steel wheels, do not remove the wheel cover at this time. If equipped with aluminum wheels where the center cap covers the lug nuts, use the lug wrench to pry the center cap off carefully before raising the vehicle.
3. Before raising the vehicle, use the lug wr ench to loosen, but not remove, the lug nuts on the wheel with the flat tire. T urn the lug nuts counterclockwise one turn while the wheel is still on the ground. 4. Place the jack underneath the lift area that is closest to the flat tire.
Jack Engagement Locations 364 WHA T TO DO IN EMERGENCIES I n f o r m a t i o n P r o v i d e d b y :.
5. Raise the vehicle just enough to remove the flat tire and install the spare tir e. W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip of f the jack and hurt someone near it. Raise the vehicle only enough to remove the tire.
W ARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the ve- hicle. Always stow the jack parts and the spare tire in the places provided. Compact Spare Tire The compact spare tire is for temporary emer gency use with radial tires.
1. Mount the road tir e on the axle. For vehicles equipped with wheel covers, perform Steps 2 and 3. For vehicles equipped with center caps, proceed to Step 4. 2. Install two lug nuts on the mounting studs, which are on each side of the stud that is in alignment with the valve stem.
snapping the cover over the two lug nuts. Do not use a hammer or excessive force to install the cover . 4. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel.
JUMP-ST ARTING PROCEDURES W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is ON. Y ou can be hurt by the fan. • Do not attempt to push or tow your vehicle to get it started.
NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals are located in the engine compartment for jump-starting. 1. W ear eye protection and remove any metal jewelry such as watchbands or bracelets that might make an inadvertent electrical contact.
W ARNING! • Y ou should not try to start your vehicle by pushing or towing. • Do not connect the cable to the negative post of the discharged battery . The resulting electrical spark could cause the battery to explode. • During cold weather when temperatures are be- low the freezing point, electrolyte in a discharged battery may freeze.
the instrument cluster) remains on continuously after starting the engine of the vehicle with the discharged battery . 8. When removing the jumper cables, reverse the above sequence exactly .
CAUTION! • When “rocking” a stuck vehicle by moving be- tween 1st and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • Racing the engine or spinning the wheels too fast may lead to transmission overheating and failure.
TOWING A DISABLED VEHICLE Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position. The only ap- proved method of towing without the ignition key is with a flatbed truck. Proper towing equipment is neces- sary to prevent damage to the vehicle.
CAUTION! (Continued) • If the transmission is not operative or if the vehicle is to be towed more than 15 miles (24 km), then the only approved method of towing is with a flatbed truck. Otherwise, damage to the trans- mission may result. • Do not tow the vehicle from the rear .
I n f o r m a t i o n P r o v i d e d b y :.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.7L ............. 3 7 9 䡵 Engine Compartment — 3.5L ............. 3 8 0 䡵 Engine Compartment — 5.7L ............. 3 8 1 䡵 Onboard Diagnostic System — OBD II ...... 3 8 2 ▫ Loose Fuel Filler Cap .
▫ W indshield W ashers .................. 3 9 3 ▫ Exhaust System ..................... 3 9 4 ▫ Cooling System ..................... 3 9 7 ▫ Brake System ....................... 4 0 2 ▫ Automatic T ransmission ............... 4 0 4 ▫ All Wheel Drive (A WD) — If Equipped .
ENGINE COMP ARTMENT — 2.7L 1 — Integrated Power Module 6 — Air Cleaner Filter 2 — Engine Oil Dipstick 7 — Coolant Pr essure Cap 3 — Brake Fluid Reservoir Access Cover 8 — Engine Oil Fill.
ENGINE COMP ARTMENT — 3.5L 1 — Integrated Power Module 6 — Engine Coolant Reservoir 2 — Air Cleaner Filter 7 — Engine Oil Fill 3 — Brake Fluid Reservoir Access Cover 8 — Engine Oil Dipst.
ENGINE COMP ARTMENT — 5.7L 1 — Integrated Power Module 6 — Air Cleaner Filter 2 — Coolant Pr essure Cap 7 — Engine Oil Fill 3 — Brake Fluid Reservoir Access Cover 8 — Engine Oil Dipstick.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
TRIP ODOMETER button to turn of f the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the MIL.
5. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
DEALER SERVICE Y our authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle.
The best time to check the engine oil level is about five minutes after a fully warmed engine is shut off. Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level r eadings. Maintain the oil level between the MIN and MAX markings on the dipstick.
NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or six months, whichever occurs first. Engine Oil Selection For best performance and maximum protection under al.
The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to “Engine Compart- ment” in this section. Lubricants that do not have both, the engine oil certifi- cation mark and the correct SAE viscosity grade number should not be used.
Engine Air Cleaner Filter Refer to the “Maintenance Schedule” in Section 8 for proper maintenance intervals. W ARNING! The air induction system (air cleaner , hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner , hoses, etc.
NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals are located in the engine compartment for jump-starting. W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing.
W ARNING! (Continued) • The battery in this vehicle has a vent hose that should not be disconnected and should only be replaced with a battery of the same type (vented).
W ARNING! (Continued) • The air conditioning system contains refrigerant under high pressure. T o avoid risk of personal injury or damage to the system, adding refrigerant or any repair requiring lines to be disconnected should be done by an experienced technician.
MOP AR 威 Spray White Lube to assure quiet, easy opera- tion and to protect against rust and wear . Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubricating excess oil and gr ease should be r emoved.
T o pr event freeze-up of your windshield washer system in cold weather , select a solution or mixture that meets or exceeds the temperatur e range of your climate.
W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing CO, refer to “Exhaust Gas” under “Safety T ips” in Section 2.
W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn.
Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the LOCK position. The fan is tempera- ture controlled and can start at any time the ignition switch is in the ON position.
Cooling System — Drain, Flush, and Refill If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner . Follow with a thorough rinsing to remove all deposits and chemicals.
CAUTION! (Continued) • This vehicle has not been designed for use with propylene glycol-based engine coolant (anti- freeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended. Adding Coolant Y our vehicle has been built with an improved engine coolant (antifreeze) that allows extended maintenance intervals.
NOTE: Mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifreeze) and will require more frequent engine coolant (antifreeze) changes.
rules for your community . T o prevent ingestion by ani- mals or children, do not store ethylene glycol-based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground. If ingested by a child, contact a physician immediately .
coolant (antifreeze) needs to be added, contents of coolant recovery bottle must also be protected against freezing. • If frequent engine coolant (antifreeze) additions are requir ed, or if the level in the coolant r ecovery bottle does not dr op when the engine cools, the cooling system should be pressur e tested for leaks.
Master Cylinder - Brake Fluid Level Check Check the fluid level in the master cylinder immediately if the brake system warning light indicates system fail- ure. Check the fluid level in the master cylinder when per- forming underhood services. Clean the top of the master cylinder area befor e removing the cap.
CAUTION! Do not allow petroleum-based fluid to contaminate the brake fluid. Seal damage may result. Automatic T ransmission Fluid Level Check Regular automatic transmission fluid level checks are not requir ed. For this reason, the dipstick is omitted.
Fluid and Filter Changes Refer to the “Maintenance Schedule” in Section 8 for proper maintenance intervals. If the transmission is disassembled for any reason, the fluid and filter should be changed. Selection of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission perfor- mance.
The front differ ential fill plug is located on the outer cover near the halfshaft attachment. T o inspect the differ - ential fluid level, remove the fill plug. The fluid level should be even with or slightly below the bottom of the hole. Fluid Changes Refer to the “Maintenance Schedule” in Section 8 for proper maintenance intervals.
W ashing • W ash your vehicle r egularly . Always wash your ve- hicle in the shade using MOP AR 威 Car W ash or a mild car wash soap, and rinse the panels completely with clear water . • If insects, tar , or other similar deposits have accumu- lated on your vehicle, use MOP AR 威 Super Kleen Bug and T ar Remover to r emove.
• If your vehicle is damaged due to an accident or similar cause that destroys the paint and protective coating, have your vehicle repaired as soon as pos- sible. The cost of such r epairs is considered the r espon- sibility of the owner . • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc.
Y our leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and MOP AR 威 T otal Clean or equivalent.
quarter window equipped with the radio antenna. Do not use scrapers or other sharp instrument that may scratch the elements. When cleaning the rear view mirror , spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirr or .
FUSES Integrated Power Module The Integrated Power Module (IPM) is located in the engine compartment. This module contains fuses and relays. CAUTION! • When installing the integrated power module cover , it is important to ensure the cover is prop- erly positioned and fully latched.
Cavity Car- tridge Fuse Mini- Fuse Description 1 — 15 Amp Blue W asher Motor 2 — 25 Amp Neutral Powertrain Control Module (PCM) 3 — 25 Amp Neutral Ignition Run/Start 4 — 25 Amp Neutral Alterna.
Cavity Car- tridge Fuse Mini- Fuse Description 1 9——— 2 0——— 2 1——— 2 2——— Rear Power Distribution Center There is also a power distribution center located in the trunk under the spar e tir e access panel. This center contains fuses and relays.
CAUTION! • When installing the power distribution center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure.
Cavity Car- tridge Fuse Mini- Fuse Description 1 60 Amp Y ellow — Ignition Off Draw (IOD) 2 40 Amp Green — Integrated Power Mod- ule (IPM) 3— — — 4 40 Amp Green — Integrated Power Mod- ule.
Cavity Car- tridge Fuse Mini- Fuse Description 1 6——— 17 — 20 Amp Y ellow Cluster 18 — 20 Amp Y ellow Selectable Power Outlet 19 — 10 Amp Red Stop Lights 2 0——— 2 1——— 2 2—.
Cavity Car- tridge Fuse Mini- Fuse Description 35 — 5 Amp Orange Antenna Module - if equipped/Power Mir- rors 36 — 20 Amp Y ellow Hands-Free Phone - if equipped/V ideo Moni- tor - if equipped/Radi.
* Cavities 1 1, 12, and 13 contain self-resetting fuses (circuit br eakers) that are only serviceable by an autho- rized dealer . The cluster and the driver seat switch (if equipped) are fused by the 25-Amp circuit breaker in Cavity 1 1. The passenger seat switch (if equipped) is fused by the 25-Amp cir cuit breaker in Cavity 12.
NOTE: For lighted switches, see your authorized dealer for replacement instr uctions. All of the interior bulbs are glass wedge base or glass cartridge types. Aluminum base bulbs ar e not appr oved and should not be used for replacement. Exterior Bulb Number Low Beam Headlight (Standard Halogen) .
CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 3. Disconnect the bulb from the socket assembly and install the replacement bulb.
3 — Park/T urn Light Bulb 4 — Side Marker Light Bulb MAINT AINING YOUR VEHICLE 421 7 I n f o r m a t i o n P r o v i d e d b y :.
Low Beam Headlight, High Beam Headlight, and Park/T urn Light — Models with High Intensity Discharge Headlights (HID) HID Headlights The headlights are a type of high voltage discharge tube. High voltage can remain in the circuit even with the HEADLIGHT switch off and the key r emoved.
Backup Light, Side Marker Light, T ail/T urn Light, and T ail/Stop Light 1. Open the T runk. 2. Remove two fasteners from the back of the tail light assembly . 3. Pull back the trunk liner . 4. Remove the remaining fastener from the back of the tail light assembly .
8. T urn the appr opriate bulb and socket assembly coun- terclockwise to r emove it from the tail light assembly . 1 — Backup Light Bulb 2 — Side Marker Light Bulb 424 MAINT AINING YOUR VEHICLE I .
9. Disconnect the bulb from the socket assembly and install the replacement bulb. 10. Reinstall the bulb and socket assembly into the tail light assembly , and then turn it clockwise.
1 1. Reinstall the tail light assembly , fasteners, electrical connector , and trunk liner . 12. Close the trunk. License Light 1. Remove the scr ews securing the light to the r ear fascia. 2. Remove the bulb and socket assembly . 3. Disconnect the bulb from the socket assembly and install the replacement bulb.
FLUIDS AND CAP ACITIES U.S. Metric Fuel (Approximate) 2.7 Liter Engine 18 Gallons 68 Liters 3.5 Liter Engine without All Wheel Drive 18 Gallons 68 Liters 3.5 Liter Engine with All Wheel Drive 19 Gallons 72 Liters 5.7 Liter Engine 19 Gallons 72 Liters Engine Oil with Filter 2.
3.5 Liter Engine with All Wheel Drive (MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula) 1 1.4 Quarts 10.8 Liters 5.7 Liter Engine without Severe Duty II Cooling System (MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula) 14.7 Quarts 13.
FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) or equivalent Engine Oil (2.
Component Fluid, Lubricant, or Genuine Part Oil Filter (2.7L, 3.5L, and 5.7L En- gines) MOP AR 威 Engine Oil Filter (P/N 04884899AB) or equivalent Fuel Selection (2.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 4 3 2 䡵 Maintenance Schedule .................. 4 3 2 ▫ Required Maintenance Intervals .
EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued pr oper functioning of the emissions control system.
NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change, even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time.
• Check all lights and other electrical items for correct operation. At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle.
6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the rear axle fluid.
30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (2.7L and 5.7L Engines). ❏ Inspect the transfer case fluid — All Wheel Drive (A WD).
42,000 Miles (70,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the rear axle fluid.
66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (2.7L and 5.7L Engines). ❏ Inspect and replace PCV valve if necessary.
96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the air conditioning filter (if equipped) ❏ Replace the spark plugs (2.
132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or of f-road conditions. Inspect the engine air cleaner filter; replace if necessary .
144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
† This maintenance is r ecommended by the manufacturer to the owner , but is not required to maintain emissions warranty . W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 5 1 ▫ Prepar e For The Appointment ........... 4 5 1 ▫ Prepar e A List ...................... 4 5 1 ▫ Be Reasonable W ith Requests .
䡵 Publication Order Forms ................ 4 5 5 䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 4 5 7 ▫ T readwear ......................... 4 5 7 ▫ T raction Grades ..................... 4 5 7 ▫ T emperature Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center .
the ownership experience. Y ou’ll be pleased with their sincere efforts to r esolve any warranty issues or r elated concerns. W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects, or other reproductive harm.
a group of vehicles, it may order a recall and r emedy campaign. However , NHTSA cannot become involved in individual pr oblems between you, your authorized dealer , and the manufacturer . T o contact NHTSA, you may either call the Auto Safety Hotline toll fr ee at 1–888–327–4236 (TTY : 1–800–424– 9153), or go to http://www .
vehicles. A complete working knowledge of the ve- hicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with dia- grams, charts and detailed illustrations.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tir e grading categories were established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tir e’s manufactur er in each category is shown on the sidewall of the tires on your vehicle.
T emperature Grades The temperature grades are A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10 I n f o r m a t i o n P r o v i d e d b y :.
About Y our Brakes ....................... 2 9 2 ABS (Anti-Lock Brake System) .............. 2 9 4 Adding Engine Coolant (Antifreeze) .......... 3 9 9 Adding Fuel ........................... 3 3 7 Adding W asher Fluid ..................... 3 9 3 Additives, Fuel .
Auto Up Power W indows .................. 3 7 Automatic Dimming Mirror ................. 8 6 Automatic Door Locks ................... 30,31 Automatic Headlights .................... 1 3 2 Automatic Oil Change Indicator .......... 177,186 Automatic T emperatur e Control (A TC) .
Anti-Lock (ABS) ....................... 2 9 4 Fluid Check ....................... 403,430 Master Cylinder ....................... 4 0 3 Parking ............................. 2 9 2 W arning Light ........................ 1 7 9 Brakes ..................
Climate Control ......................... 2 5 3 Clock ........................ 199,213,216,226 Coin Holder ........................... 1 5 9 Compact Disc (CD) Maintenance ............. 2 5 2 Compact Spare T ire ...................... 3 1 3 Compass ...
Deck Lid, Emergency Release ................ 4 1 Deck Lid, Power Release ................... 3 9 Defroster , Rear W indow ................... 1 6 3 Defroster , W indshield ................ 80,254,260 Delay (Intermittent) W ipers ................. 1 3 7 Diagnostic System, Onboard .
Emergency , In Case of Freeing V ehicle When Stuck ............... 3 7 2 Hazard W arning Flasher ................. 3 5 6 Jacking ............................. 3 5 7 Jump Starting ......................... 3 6 9 Overheating .......................... 3 5 6 T owing .
Exterior Lighting ........................ 1 3 1 Exterior Lights .......................... 8 0 Filler Location Fuel ...................... 3 3 7 Filters Air Cleaner .......................... 3 8 9 Air Conditioning .................... 262,392 Engine Oil .
Gauge .............................. 1 7 2 Materials Added ....................... 3 3 5 Methanol ............................ 3 3 3 Octane Rating ...................... 332,429 Requirements ......................... 3 3 2 Specifications .............
Bulb Replacement ...................... 4 1 9 Cleaning ............................ 4 0 9 Delay .............................. 1 3 2 High Beam/Low Beam Select Switch ........ 1 3 5 Lights On Reminder .................... 1 3 3 On W ith W ipers .......
Jack Location ........................... 3 5 8 Jack Operation .......................... 3 6 0 Jacking Instructions ...................... 3 6 0 Jump Starting .......................... 3 6 9 Key , Programming ........................ 1 7 Key , Replacement .
Engine T emperatur e W arning .............. 1 7 5 Exterior .............................. 8 0 F o g ............................. 133,176 Hazard W arning Flasher ................. 3 5 6 Headlight Switch ...................... 1 3 1 Headlights .......
Automatic Door ........................ 3 0 Child Protection ........................ 3 3 Door ................................ 2 9 Power Door ........................... 3 0 Low T ir e Pressur e System .................. 3 2 2 Lower Anchors and T ether for CHildren (LA TCH) .
Occupant Restraints ....................... 4 1 Octane Rating, Gasoline (Fuel) ............ 332,429 Odometer .......................... 172,177 T r i p ............................. 172,177 Oil Change Indicator .................. 177,186 Oil Change Indicator , Reset .
Phone, Cellular .......................... 8 9 Phone, Hands-Free (uconnect) ............... 8 9 Placard, T ire and Loading Information ......... 3 0 6 Power Deck Lid Release ....................... 3 9 Distribution Center (Fuses) ............... 4 1 1 Door Locks .
Reminder , Lights On ..................... 1 3 3 Reminder , Seat Belt ....................... 4 9 Remote Control Starting System ........................ 2 6 Remote Keyless Entry (RKE) ................. 2 0 Remote Sound System (Radio) Controls .......
Pretensioners .......................... 4 9 Rear Seat ............................. 4 2 Reminder ............................ 1 7 6 Untwisting Procedur e .................... 4 8 Seats ................................. 1 2 2 Adjustment ..............
Snow Chains (T ir e Chains) ................. 3 1 9 Snow T ir es ............................ 3 2 0 Sound System Kicker .............................. 2 4 6 Spare T ire ....................... 313,314,358 Spark Plugs ............................ 4 2 9 Specifications Fuel (Gasoline) .
T achometer ............................ 1 7 2 T elescoping Steering Column ............... 1 3 9 T emperatur e Control, Automatic (A TC) ........ 2 5 6 T emperatur e Gauge, Engine Coolant ....... 173,357 T ether Anchor , Child Restraint .............
T railer T owing ........................ 3 5 0 T r ead W ear Indicators ................... 3 1 6 T o Open Hood .......................... 1 2 9 T ongue W eight/T railer W eight .............. 3 4 7 T or que Converter Clutch .................. 2 8 0 T owing .
T ransporting Pets ........................ 7 7 T r ead W ear Indicators .................... 3 1 6 T rip Odometer ....................... 172,177 T runk Lid (Deck Lid) .................... 39,41 T runk Release, Emer gency .................. 4 1 T runk Release Remote Contr ol .
W ater Driving Through ...................... 2 8 8 Wheel and Wheel T rim .................... 4 0 8 Wheel and Wheel T rim Car e ................ 4 0 8 W ind Buf feting ....................... 39,154 W indow Airbag (Side Curtain) ............. 54,60 W indow Fogging .
INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations ar e incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed pr operly by trained person- nel.
2009 c h a r g e r CHARGER Chrysler LL C 81-226-0920 Second Edition Printed in U.S.A. OWNER ’S MANU AL 2009 147913 09 OM Dodge LX48Charger.indd 1 9/8/08 3:41:08 PM I n f o r m a t i o n P r o v i d .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Dodge Charger (2009) c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Dodge Charger (2009) - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Dodge Charger (2009), vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Dodge Charger (2009) va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Dodge Charger (2009), mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Dodge Charger (2009).
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Dodge Charger (2009). Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Dodge Charger (2009) ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
