Manuel d'utilisation / d'entretien du produit 2008 LX/DX-48 Charger SRT8 du fabricant Dodge
Aller à la page of 442
Char ger SR T8 OWNER’ S MANUAL 2008 2008 Charger SR T8 81-226-0821 First Edition Printed in U.S.A..
VEHICLES SOLD IN CANADA W ith respect to any V ehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor . DRIVING AND ALCOHOL Drunken driving is one of the most fr equent causes of accidents.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ...........
.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number ............... 6 䡵 V ehicle Modifications / Alterations .
INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer-oriented documents.
INTRODUCTION 5 1.
W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es that could r esult in an accident or bodily injury . It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entir e manual, you may miss important infor - mation.
VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys .................. 1 2 ▫ W ireless Ignition Node (WIN) ............. 1 2 ▫ FOB W ith Integrated Key ................. 1 3 ▫ T ip Start Feature ..................
▫ T o Unlatch The T runk ................... 2 2 ▫ Using The Panic Alarm .................. 2 2 ▫ Programming Additional T ransmitters ........ 2 3 ▫ T ransmitter Battery Service ............... 2 3 ▫ General Information ....................
▫ Driver And Fr ont Passenger Supplemental Restraint System (SRS) - Airbag ............ 4 8 ▫ Event Data Recorder (EDR) ............... 6 1 ▫ Child Restraint ........................ 6 3 䡵 Break-In Recommendations ................. 7 2 䡵 Safety T ips .
A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Fob with Integrated Key and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the double-sided integrated key into the igni- tion switch with either side up.
Fob with Integrated Key The Fob with Integrated Key operates the ignition switch. It also contains the Remote Keyless Entry (RKE) trans- mitter and a valet key , which stores in the rear of the Fob. The valet key allows for entry into the vehicle should the battery in the vehicle or the Fob go dead.
Tip Start Feature Do not press the accelerator . Use the Fob with Integrated Key to briefly turn the ignition switch to the ST AR T position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running.
Key-In-Ignition Reminder If you open the driver’s door and the key is in the ignition, a chime will sound to remind you to r emove the key . NOTE: The Key-In-Ignition reminder only sounds when the ignition key is placed in the LOCK or ACC position.
NOTE: • The Sentry Key 威 Immobilizer System is not compat- ible with aftermarket remote starting systems. Use of these systems may result in vehicle starting pr oblems and loss of security protection.
procedur e. This pr ocedure consists of pr ogramming a blank fob to the vehicle electronics. A blank fob is one that has never been programmed. NOTE: When having the Sentry Key 威 Immobilizer System serviced, bring all vehicle fobs with you to the authorized dealer .
NOTE: If a programmed key is lost, see your authorized dealer to have all remaining keys erased fr om the sys- tem’s memory . This will prevent the lost key from starting your vehicle. The remaining keys must then be repr ogrammed. All vehicle keys must be taken to an authorized dealer at the time of service to be repr o- grammed.
T o Arm the System Remove the key from the ignition switch and either pr ess a power door LOCK switch while the driver or passenger door is open or press the LOCK button on the Remote Keyless Entry (RKE) transmitter . After the last door is closed, or if all doors are closed, the system will arm itself in about 16 seconds.
If the alarm system is armed and the battery becomes disconnected the system will remain armed when the battery is reconnected. The exterior lights will flash, the horn will sound, and the ignition will not start the vehicle. If this occurs, disarm the system.
T o unlock the doors: Press and r elease the UNLOCK button on the transmitter once to unlock the driver’s door , or twice within five seconds to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on.
time for this feature is pr ogrammable. For details, r efer to “T urn Headlights On with Remote Key Unlock,” under “Personal Settings (Customer Programmable Featur es),” under “Electronic V ehicle Information Center (EVIC)” in Section 4. T o lock the doors: Press and r elease the LOCK button on the transmitter to lock all doors.
• Y ou may need to be less than 35 ft (1 1 m) fr om the vehicle when using the transmitter to turn off the Panic Alarm due to the radio fr equency noises emitted by the system. Programming Additional T ransmitters Refer to Sentry Key 威 , “Customer Sentry Key 威 (Fob) Programming.
2. Remove and r eplace the batteries. A void touching the new batteries with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. Reposition the access door panel over the battery opening and snap into place.
How T o Use Remote Start All of the following conditions must be met before the engine will remote start: • Shift lever in P ARK • Doors closed • Hood closed • T runk closed • HAZARD switch .
T o Exit REMOTE ST AR T Mode without Driving the V ehicle Allow the engine to run for the entir e 15 minute cycle. T o Exit REMOTE ST AR T Mode and Drive the V ehicle Before the end of the 15 minute cycle, pr ess and r elease the UNLOCK button on the RKE transmitter to unlock the doors and disarm the V ehicle Security Alarm (if equipped).
If the door LOCK plunger is down when you shut the door , the door will lock. Therefor e, make sure the key is not inside the vehicle before closing the door . W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors before you drive as well as when you park and leave the vehicle.
Power Door Locks A power door LOCK switch is on each front door trim panel. Use this switch to lock or unlock the doors. If you press the power door LOCK switch while the key is in the ignition, and any front door is open, the power locks will not operate.
6. The doors wer e not pr eviously locked using the power door LOCK switch or Remote Keyless Entry (RKE) transmitter . Automatic Door Locks Programming The Automatic Door Locks feature can be enabled or disabled.
Child Protection Door Lock T o provide a safer environment for small childr en riding in the rear seats, the r ear doors ar e equipped with a Child Protection Door Lock system. T o Engage the Child Protection Door Lock System 1. Open the r ear door . 2.
W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. NOTE: • After engaging the Child Protection Door Lock sys- tem, always test the door from the inside to make certain it is in the desired position.
3. Repeat Steps 1 and 2 for the opposite r ear door . NOTE: After disengaging the Child Protection Door Lock system, always test the door from the inside to make certain it is in the desired position. WINDOWS Power Windows The window controls on the driver’s door contr ol all the door windows.
W ARNING! Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the windows while operating the power WINDOW switches. Such entrapment may result in serious injury or death.
T o close the window part way , lift the WINDOW switch to the first detent and release it when you want the window to stop. The power WINDOW switches will remain active for up to 60 minutes after the ignition switch is turned off. Opening either front door will cancel this featur e.
Reset Anytime the vehicle battery is disconnected or goes dead, the AUTO-up function will be disabled. T o reactivate the auto-up feature, perform the following steps after vehicle power is restor ed: 1.
TRUNK LOCK AND RELEASE The trunk lid can be r eleased from inside the vehicle by pressing the TRUNK RELEASE Button located on the instrument panel to the left of the steering wheel. NOTE: The transmission must be in P ARK before the switch will operate.
TRUNK SAFETY W ARNING W ARNING! Do not allow children to have access to the trunk, either by climbing into the trunk from outside, or through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended. Once in the trunk, young children may not be able to escape, even if they entered through the rear seat.
OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint systems. These include the fr ont and rear seat belts for the driver and all passengers, the front ai.
ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All seating positions in your vehicle are equipped with lap/shoulder belts. The belt webbing retractor is designed to lock during very sudden stops or impacts.
Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the front seat. 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries.
4. Position the lap belt acr oss your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up a bit on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision.
6. T o release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection.
As a guide, if you are shorter than average you will prefer a lower position, and if you ar e taller than average you will prefer a higher position. When you r elease the anchorage try to move it up and down to make sure that it is locked in position.
The pretensioners ar e trigger ed by the Occupant Re- straint Controller (ORC). (Refer to information on Air- bags in this section). Like the front airbags, the pr eten- sioners are single use items. After a collision that is sever e enough to deploy the airbags and pretensioners, both must be replaced.
NOTE: W atch for the Seat Belt Reminder Light to turn on while unbuckling the seat belt and turn off while re-buckling the seat belt. It may be necessary to r etract the seat belt. 4. T urn the ignition switch to the LOCK position. A single chime will sound to signify that you have success- fully completed the programming.
Seat Belts and Pregnant Women W e recommend that pregnant women use the seat belts throughout their pr egnancy . Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug acr oss the hips as possible.
Driver and Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has front airbags for both the driver and front passenger as a supplement to the seat belt r estraint systems. The driver’s airbag is mounted in the center of the steering wheel.
NOTE: The front airbags ar e certified to the Federal regulations that allow less for ceful deployment. The front airbags have a multistage inflator design. This may allow the airbag to have differ ent rates of inflation that are based on collision severity .
If the vehicle is equipped with supplemental side curtain airbags, they are located above the side windows. Their covers are also labeled SRS AIRBAG. NOTE: Airbag covers may not be obvious in the interior trim, but they will open to allow airbag deployment.
W ARNING! • If your vehicle is equipped with supplemental front seat mounted side airbags, do not use accessory seat covers or place objects between you and the seat airbags; the perfor- mance could be adversely affected and/or objects could be pushed into you, causing serious injury .
Here are some simple steps you can take to minimize the risk of harm from a deploying airbag. 1. Childr en 12 years old and younger should ride buck- led up in the rear seat. W ARNING! Infants in rear-facing child restraints should NEVER ride in the front seat of a vehicle with a passenger front airbag.
8. If your vehicle has supplemental side curtain airbags and/or supplemental front seat mounted side airbags, do not lean against the door , as the airbags will inflate forcefully into the space between you and the door . 9. If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center .
Airbag System Components The airbag system consists of the following: • Occupant Restraint Controller (ORC) • Side Remote Acceleration Sensors (if equipped) • Airbag W arning Light • Driver Ai.
• The ORC also monitors the readiness of the electr onic parts of the system whenever the ignition switch is in the ST AR T or ON positions. These include all of the items listed above except the knee bolster , the instru- ment panel, and the steering wheel and column.
separate and fold out of the way as the bags inflate to their full size. The bags fully inflate in about 50 to 70 ms. This is about half of the time that it takes to blink your eyes. The bags then quickly deflate while helping to restrain the driver and fr ont passenger .
seam in the seat’s trim cover and opens into the space between the occupant and the door . The airbag inflates at a very high speed and with enough force to injur e you if you are not belted and seated pr operly , or if items are positioned in the ar ea wher e the front seat mounted side airbag inflates.
W ARNING! Unapproved modifications or service procedures to the front seat assembly , its related components, or seat cover may inadvertently change the airbag de- ployment in case of a frontal crash. This could result in death or serious injury to the driver or front seat passenger if the vehicle is involved in an accident.
process that generates the nontoxic gas used for airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water . For nose or throat irritation, move to fresh air .
Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured because the airbags are not there to protect you.
Event Data Recorder (EDR) In the event of an accident, your vehicle is designed to recor d up to five seconds of specific vehicle data param- eters (see the following list) in an event data recor der .
may be released for incorporation in aggr egate crash databases, such as those maintained by the US govern- ment and various states. Data of a potentially sensitive nature, such as would identify a particular driver , ve- hicle, or crash, will be treated confidentially .
• T raction/stability control status • T ire Pressur e Monitoring System status (if equipped) Child Restraint Everyone in your vehicle needs to be buckled up all the time, including babies and children. Every state in the United States and all Canadian provinces r equir e that small children ride in pr oper r estraint systems.
Infants and Child Restraints • Safety experts recommend that childr en ride rearwar d-facing in the vehicle until they ar e at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used r earwar d-facing, infant carriers and convertible child seats.
The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who ar e still too small to fit the vehicle’s seat belts properly . If the child cannot sit with knees bent over the vehicle’s seat cushion while the child’s back is against the seatback, they should use a belt-positioning booster seat.
W ARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint.
• When your child restraint is not in use, secur e it in the vehicle with the seat belt or remove it fr om the vehicle. Do not leave it loose in the vehicle. In a sudden stop or collision, it could strike the occupants or seatbacks and cause serious personal injury .
rear -seating positions, or if your child r estraints are not LA TCH-compatible, install the restraints using the vehi- cle’s seat belts. Installing the LA TCH-Compatible Child Restraint System W e urge you to follow the manufacturer’s dir ections carefully when installing your child r estraint.
window . These tether strap anchorages are under a plastic cover with this symbol on it. Many , but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap.
the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child. Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leave your child unattended in the vehicle.
webbing to retract back into the r etractor . T ighten web- bing. T o release, simply unbuckle the seat belt by de- pressing the button, allowing the webbing to r etract into the retractor .
3. Attach the tether strap hook (A) of the child restraint to the anchor (B) and remove slack in the tether strap according to the child r estraint manufactur er’s instruc- tions. NOTE: Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap.
The engine oil, transmission fluid, and axle lubricant installed at the factory is high-quality and energy- conserving. Oil, fluid, and lubricant changes should be consistent with anticipated climate and conditions under which vehicle operations will occur .
Lock Y our V ehicle Always remove the key fr om the ignition and lock all doors when leaving the vehicle unattended, even in your own driveway or garage. T ry to park your vehicle in a well-lit area and never invite theft by leaving articles of value exposed.
W ARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you.
Defroster Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should be able to feel the air directed against the windshield.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 M i r r o r s ............................... 8 1 ▫ Inside Day/Night Mirror ................. 8 1 ▫ Automatic Dimming Inside Mirror — If Equipped .......................... 8 2 ▫ Outside Mirrors .
▫ Things Y ou Should Know About Y our UConnect 威 System .................... 1 0 3 ▫ General Information ................... 1 1 2 䡵 V oice Recognition System (VR) — If Equipped . . 1 12 ▫ V oice Recognition System (VR) Operation .... 1 1 2 ▫ Commands .
▫ Interior Lights ....................... 1 3 0 䡵 W indshield W ipers And W ashers ............ 1 3 2 ▫ Intermittent W iper System ............... 1 3 2 ▫ Mist Feature ......................... 1 3 3 ▫ W indshield W ashers ..................
▫ Reprogramming A Single HomeLink 威 Button ............................. 1 4 6 ▫ Security ............................ 1 4 7 ▫ T roubleshooting T ips ................... 1 4 7 ▫ General Information ................... 1 4 7 䡵 Power Sunroof — If Equipped .
MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view thr ough the r ear window . A two-point pivot system allows for horizontal and vertical mirror adjustment. Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle).
Automatic Dimming Inside Mirror — If Equipped This mirror automatically adjusts for annoying headlight glare fr om vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirr or . A light next to the button will illuminate to indicate when the dimming feature is activated.
W ARNING! V ehicles and other objects seen in the passenger-side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger-side convex mirror could cause you to collide with another vehicle or other object.
Power Remote Control Mirrors The power MIRROR switch is located on the driver’s door trim panel next to the power door LOCK switch. A rotary knob selects the left mirr or , right mirror , or off position. After selecting a mirror , move the knob in the same direction you want the mirr or to move.
Illuminated V anity Mirrors — If Equipped An illuminated vanity mirror is on the sun visor . T o use the mirror , rotate the sun visor downward and swing the mirror cover upwar d. The light turns on automatically . Closing the mirror cover turns of f the light.
NOTE: For UConnect 威 customer support, visit the following websites: • www .chrysler .com/uconnect • www .dodge.com/uconnect • www .jeep.com/uconnect • or call 1–877–855–8400 UConnect .
V oice Recognition Button Actual button location may vary with radio. The individual buttons are described in the “Operation” section. The UConnect 威 system can be used with any Hands-Free Profile certified Bluetooth 威 cellular phone. See the UConnect 威 website for supported phones.
• For each feature explanation in this section, only the combined form of the voice command is given. Y ou can also break the commands into parts and say each part of the command when you are asked for it.
The following are general phone to UConnect 威 system pairing instructions: • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing. ⬙ • When prompted, after the beep, say ⬙ Pair a Phone ⬙ and follow the audible prompts.
• The system will prompt you to say the number you want to call. • For example, you can say ⬙ 234-567-8901. ⬙ The phone number that you enter must be of valid length and combination. Based on the country in which the ve- hicle was purchased, the UConnect 威 system limits the user from dialing an invalid combination of numbers.
• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook New Entry . ⬙ • When prompted, say the name of the new entry . Use of long names helps the voice recognition and it is recommended. For example, say ⬙ Robert Smith ⬙ or ⬙ Robert ⬙ instead of ⬙ Bob.
• Some phones cannot send phonebook entries if they are alr eady connected to any system via Bluetooth 威 , and you may see a message on the phone display that the Bluetooth 威 link is busy .
Delete Entries in the UConnect 威 Phonebook NOTE: Editing phonebook entries is recommended when the vehicle is not in motion. • Press the PHONE button to begin.
List All Names in the UConnect 威 Phonebook • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook List Names. ⬙ • The UConnect 威 system will play the names of all the phonebook entries.
Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in pr ogr ess and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone. Press the PHONE button to place the curr ent call on hold and answer the incoming call.
Three-W ay Calling T o initiate three-way calling, press the “V oice Recogni- tion” button while a call is in progr ess, and make a second phone call, as described under ⬙ Making a Second Call While Current Call in Pr ogr ess.
• After the ignition key is switched to OFF , a call can continue on the UConnect 威 system for a certain dura- tion, after which the call is automatically transferred from the UConnect 威 system to the mobile phone. • An active call is automatically transferred to the mobile phone after the ignition key is switched to OFF .
• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Emergency ⬙ and the UConnect 威 system will instr uct the paired cellular phone to call the emer gency num- ber . This feature is only supported in the U.S. NOTE: The emergency number dialed is based on the country where the vehicle is pur chased (91 1 for the U.
certain companies, which time out a little too soon to work properly with the UConnect 威 system. V oice Mail Calling T o learn how to access your voice mail, refer to ⬙ W orking with Automated Systems.
NOTE: • Y ou may not hear all of the tones due to cellular phone network configurations; this is normal. • Some paging and voice mail systems have system time out settings that are too short and may not allow the use of this feature.
dialing a number with your paired Bluetooth 威 cellular phone, the audio will be played through your vehicle’s audio system. The UConnect 威 system will work the same as if you dial the number using voice recognition.
Connect or Disconnect Link Between the UConnect 威 System and Cellular Phone Y our cellular phone can be paired with many differ ent electronic devices, but can only be actively ⬙ connected ⬙ with one electronic device at a time.
• The selected phone will be used for the next phone call. If the selected phone is not available, the UConnect 威 system will return to using the highest priority phone present in or near (appr oximately within 30 ft (9 m) the vehicle. Delete UConnect 威 Paired Cellular Phones • Press the PHONE button to begin.
• Press the “V oice Recognition” button and say the ⬙ Setup, V oice T raining ⬙ command. Repeat the words and phrases when pr ompted by the UConnect 威 system. For best results, the V oice T raining session should be completed when the vehicle is parked with the engine running, all windows closed, and the blower fan switched off.
• Even though the system is designed for users speaking in North American English, French, and Spanish ac- cents, the system may not always work for some. • When navigating through an automated system such as voice mail, or when sending a page, at the end of speaking the digit string, make sure to say ⬙ Send.
• Performance, such as audio clarity , echo, and loudness to a large degr ee r ely on the phone and network, and not the UConnect 威 system. • Echo at the far end can sometimes be reduced by lowering the in-vehicle audio volume. • In a convertible vehicle, system performance may be compromised with the convertible top down.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 107 3.
108 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 109 3.
V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompt.
V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oic.
General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, including interference that may cause undesir ed op- eration.
If you ever wish to interrupt the system while it lists options, press the VR har d-key , listen for the beep, and say your command. Pressing the VR har d-key while the system is speaking is known as “barging in.” The system will be interr upted and you can add or change commands.
3. Use the ON/OFF VOLUME r otary knob to adjust the volume to a comfortable level while the voice recognition system is speaking. Please note the volume setting for VR is differ ent then the audio system. Main Menu Start a dialogue by pressing the VR har d-key .
Satellite Radio T o switch to satellite radio mode say SA T or SA TELLITE RADIO. In this mode, you may say the following com- mands: • CHANNEL NUMBER (to change the channel by its spoken number) •.
− CONTINUE (to continue recor ding) − DELETE (to delete the recor ding) • PLA Y MEMOS (to play previously r ecorded memos) — During the playback you may press the VR har d- key to stop playing memos.
SEA TS Power Seats The power SEA T switch is on the outboard side of the seat near the floor . Use this switch to move the driver’s seat up or down, forward or r earwar d, or to tilt the seat. The passenger’s seat will move up or down, forward or rearwar d.
W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.
Head Restraints Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear . Adjust the r estraint so that the upper edge is as high as practical. T o raise it, pull upward on the head r estraint. T o lower it, depress the button on the post guide and push downward on the head restraint.
The controls for each heater ar e located near the bottom center of the instrument panel. After turning on the ignition, you can choose from High, Of f, or Low heat settings. Amber LEDs in the top portion of each switch indicate the level of heat in use.
W ARNING! Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, exhaus- tion, or other physical conditions must exercise care when using the seat heater . It may cause burns even at low temperatures, especially if used for long periods.
When the seatback is folded to the upright position, make sure it is latched by str ongly pulling on the top of the seatback above the seat strap. W ARNING! • Be certain that the seatback is securely locked into position.
Next, move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. Use the hood prop r od (if equipped) to secur e the hood in the open position. T o prevent possible damage, do not slam the hood to close it.
LIGHTS Headlight Switch The HEADLIGHT switch is located on the left side of the instrument panel. This switch contr ols the operation of the headlights, parking lights, instrument panel lights, instrument panel light dimming, interior lights, and fog lights.
Automatic Headlights — If Equipped This system automatically turns the headlights ON or OFF according to ambient light levels. T o turn the system ON, rotate the HEADLIGHT switch counter clockwise to the AUTO (A) position. When the system is on, the headlight time delay feature is also on.
Headlights On with Wipers (A vailable with Auto Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers ar e turned ON if the HEADLIGHT switch is placed in the AUTO posi- tion. In addition, the headlights will turn off when the wipers are turned OFF if they wer e turned ON by this feature.
Daytime Running Lights — If Equipped The high beam headlights will come on as Daytime Running Lights whenever the ignition switch is ON, the headlights are of f, and the parking brake is of f. The HEADLIGHT switch must be used for normal nighttime driving.
Multifunction Lever The multifunction lever controls the operation of the turn signals, headlight beam selection, and passing lights. The lever is located on the left side of the steering column.
Highbeam/Lowbeam Select Switch Push the multifunction lever away from you to switch the headlights to HIGH beam. Pull the lever toward you to switch the headlights back to LOW beam. Flash to Pass Y ou can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you.
because a door is open. This includes the glove box light, but not the trunk light. T o restor e interior light operation, either turn the ignition switch ON or cycle the light switch. Dimmer Control The dimmer control is part of the HEADLIGHT switch and is located on the left side of the instrument panel.
WINDSHIELD WIPERS AND W ASHERS The multifunction lever operates the windshield wipers and washer when the ignition switch is in the ON position. The lever is located on the left side of the steering column.
wipe interval from a minimum of one cycle every second to a maximum of approximately 23 seconds between cycles. W ARNING! Sudden loss of visibility through the windshield could lead to an accident. Y ou might not see other vehicles or other obstacles.
if the HEADLIGHT switch is placed in the AUTO posi- tion. In addition, the headlights will turn off when the wipers are turned OFF if they wer e turned ON by this feature.
W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. TIL T/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downwar d.
W ARNING! Do not adjust the steering wheel while driving. The telescoping adjustment must be locked while driv- ing. Adjusting the steering wheel while driving or driving without the telescoping adjustment locked could cause the driver to lose control of the vehicle.
• The pedals can be adjusted while driving. • The pedals cannot be adjusted when the transmission is in REVERSE or when the speed control is ON. CAUTION! Do not place any article under the adjustable pedals or impede its ability to move as it may cause damage to the pedal controls.
T o Activate Push and release the ON/OFF button located on the end of the speed control lever . The indicator light in the instrument cluster will illuminate to show that the speed control sys- tem is ON. T o turn the system OFF , push and release the ON/OFF button again.
• Pull the speed control lever towar d you to CANCEL. Pushing and releasing the ON/OFF button or turning of f the ignition erases the set speed from memory . T o Resume Speed If you deactivated the speed control without erasing the set speed from memory and your vehicle speed is above 20 mph (32 km/h) you can resume the pr evious set speed.
The automatic transmission will downshift while climb- ing uphill or descending downhill. This downshift is necessary to maintain vehicle set speed. On steep hills, a greater speed loss or gain may occur , so it may be preferable to drive without speed contr ol.
Courtesy/Reading Lights At the forward end of the console ar e two courtesy/ reading lights. Press the lens to turn on the light. Pr ess it a second time to turn off the light.
The HomeLink 威 buttons are located in the over head console, and contain one, two, or three dots/lines desig- nating the differ ent HomeLink 威 channels. NOTE: HomeLink 威 is disabled when the V ehicle Secu- rity Alarm is active. W ARNING! Y our motorized door or gate will open and close while you are training the Universal T ransceiver .
W ARNING! V ehicle exhaust contains carbon monoxide, a danger- ous gas. Do not run your vehicle in the garage while training the transceiver . Exhaust gas can cause seri- ous injury or death. Programming HomeLink 姞 Before Y ou Begin If you have not trained any of the HomeLink 威 buttons, erase all channels before you begin training.
If the EVIC display states “DID NOT TRAIN” repeat Step 3. If the signal is too weak, replace the battery in the original hand-held transmitter . It may take up to 30 seconds, or longer , in rare cases. The garage door may open and close while you train.
6. Firmly pr ess and r elease the “learn” or “training” button. The name and color of the button may vary by manufacturer . NOTE: There ar e 30 seconds in which to initiate the next step after the “Learn” button has been pressed.
Similar to this Canadian law , some U.S. gate operators are designed to “time-out” in the same manner . It may be helpful to unplug the device during the cycling process to pr event possible over heating of the garage door or gate motor .
3. W ithout releasing the button, pr oceed with Program- ming HomeLink 威 Step 2 and follow all remaining steps. Security It is advised to erase all channels before you sell or turn in your vehicle. T o do this, press and hold the two outside buttons for 20 seconds until the EVIC message states “CHANNELS CLEARED.
NOTE: The transmitter has been tested and it complies with FCC and IC rules. Changes or modifications not expressly appr oved by the party r esponsible for compli- ance could void the user ’s authority to operate the device.
W ARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power SUN- ROOF switch. Such entrapment may result in serious injury or death.
sunroof will automatically r etract. Remove the obstruc- tion if this occurs. Next, press the switch forwar d and release to Expr ess Close. Pinch Protect Override If a known obstruction (ice, debris, etc.) pr events closing, press the switch forwar d and hold for two seconds after the reversal occurs.
Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. Ignition Off Operation The power SUNROOF switch will remain active for up to 60 minutes after the ignition switch is turned OFF . Opening either front door will cancel this featur e.
NOTE: If desired, the power outlet next to the ash receiver tray (if equipped) can be converted by your authorized dealer to provide power with the ignition switch in the LOCK position. The center console outlet is powered dir ectly fr om the battery (power available at all times).
Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery even when not in use (i.e., cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting.
Rear Seat Cupholders — If Equipped The rear seat cupholders ar e located in the center armr est between the rear seats. The cupholders ar e positioned forward in the armr est and side-by-side to pr ovide convenient access to beverage cans or bottles while maintaining a resting place for the r ear occupants’ el- bows.
STORAGE Console Features The center console contains two shift bezel cubby bins with rubber mats for holding small items. For vehicles not equipped with navigation radio, the console also contains an extra storage bin located below the climate control, which holds up to four CD jewel cases.
The top compartment holds small items, such as a pen and note pad, while the larger bottom compartment will hold CDs and alike. The bottom compartment also con- tains a 12-volt power outlet and a molded-in coin holder (designed to hold various size coins).
W ARNING! • Be certain that the seatback is securely locked into position. If the seatback in not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury .
.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel And Controls ............. 1 6 3 䡵 Premium Instr ument Cluster ............... 1 6 4 䡵 Instrument Cluster Descriptions ............ 1 6 5 䡵 Electronic V ehicle Information Center (EVIC) .
▫ T wo T ypes Of Signals .................. 1 9 3 ▫ Electrical Disturbances .................. 1 9 4 ▫ AM Reception ....................... 1 9 4 ▫ FM Reception ........................ 1 9 4 䡵 Sales Code REN — Multimedia System — If Equipped .
▫ Operating Instructions — Hands-Fr ee Communication (UConnect 威 ) (If Equipped) . . . 214 ▫ Clock Setting Procedur e................. 2 1 4 䡵 Sales Code RES — AM/FM Stereo Radio W ith CD Player (MP3 AUX Jack) ................ 2 1 7 ▫ Operating Instructions - Radio Mode .
▫ Kicker 威 13-Speaker High Performance Sound System W ith Driver-Selectable Surround (DSS) – If Equipped ........................... 2 3 7 ▫ Kicker 威 Mobile Surround (KMS1) 威 – If Equipped ......................... 2 3 7 䡵 Universal Consumer Interface (UCI) — If Equipped .
INSTRUMENT P ANEL AND CONTROLS 1 — Air Outlet 7 — Climate Control 13 — Hood Release 2 — Instrument Cluster 8 — HEA TED SEA T Switch* 14 — TRUNK RELEASE Switch 3 — HAZARD Switch 9 — Pow.
PREMIUM INSTRUMENT CLUSTER 164 UNDERST ANDING YOUR INSTRUMENT P ANEL.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. T rip Odometer Button Press this button to change the display fr om odometer to either of two trip odometer settings.
7. Electr onic Thr ottle Control (ETC) Light This light will turn on briefly as a bulb check when the ignition switch is turned ON. This light will also turn on while the engine is running if ther e is a problem with the Elec- tronic Thr ottle Contr ol system.
W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, refer to Section 7 and follow the warnings under the Cooling System Pressure Cap paragraph.
12. Electr onic Stability Pr ogram (ESP)/T raction Control System (TCS) Indicator Light If this indicator light flashes during accelera- tion, ease up on the accelerator and apply as little throttle as possible. Adapt your speed and driving to the prevailing r oad conditions, and do not switch off the ESP .
16. Seat Belt Reminder Light This light will turn on for five to eight seconds as a bulb check when the ignition switch is first turned ON. A chime will sound if the driver’s seat belt is unbuckled during the bulb check.
The dual brake system provides a r eserve braking capac- ity to a portion of the hydraulic system in the event of a failure. Failur e of either half of the dual brake system is indicated by the Brake W arning Light, which will turn on when the brake fluid level in the master cylinder drops below a specified level.
the light remains on, or if the light does not turn on, have the light inspected by an authorized dealer . NOTE: The light will turn on when the ignition switch is in the ON position and the parking brake is applied. This light shows only that the parking brake is applied.
maintain correct tir e pr essure, even if under -inflation has not reached the level to trigger illumination of the TPMS low tire pr essur e telltale. Y our vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly .
23. Anti-Lock Brake Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, then the Anti-Lock portion of the brake system is not functioning and service is requir ed.
The MIL flashes to alert you to serious conditions that could lead to immediate loss of power or severe catalytic converter damage. The vehicle should be serviced as soon as possible if this occurs.
The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display . It is located in the instrument cluster below the speedometer . V ehicles equipped with steering wheel-mounted buttons (de- scribed in this section) are also equipped with the EVIC.
Press the FUNCTION SELECT button to accept a selection. The FUNCTION SELECT button also functions as a remote sound system con- trol. Refer to “Remote Sound System Contr ols” in this section.
• Right Front T urn Signal Light Out (with a single chime) • Right Rear T urn Signal Light Out (with a single chime) • RKE Battery Low (with a single chime) • Personal Settings Not A vailable – V ehicle Not in P ARK • Left/Right Front Door Ajar (one or more, with a single chime if speed is above 1 mph [1.
• Check TPM System (with a single chime). Refer to “Starting And Operating, T ir e Section” • Check Gascap (refer to “Adding Fuel” in Section 5) • Insert Key/T urn T o Run (refer to “R.
• T rip B • Elapsed T ime • Display Units of Measure in Press the SCROLL button to cycle through all the T rip Computer functions. The T rip Functions mode displays the following. • A verage Fuel Economy Shows the average fuel economy since the last reset.
• T rip B Shows the total distance traveled for T rip B since the last reset. • Elapsed T ime Shows the total elapsed time of travel since the last reset when the ignition switch is in the ACC position. Elapsed time will increment when the ignition switch is in the ON or ST AR T position.
The Performance Pages include the following features: • 0-60 mph (0-100 km/h) • Braking Distance • 1/8 Mile • 1/4 Mile • Instantaneous G-Force • Peak G-Force • Digital Speedometer T o access, press and release the MENU button until Performance Pages displays in the EVIC.
Braking Distance When selected, this screen displays the vehicle’s braking distance and the speed at which the brake pedal was depressed. • This feature will only function when applying the brakes at speeds above 30 mph (48 km/h). • Engaging the parking brake will disable this feature.
• The time and speed will continue to display until the FUNCTION SELECT button is pressed. • Pressing the FUNCTION SELECT button will clear the current r un and display the vehicle’s best 1/8 mile (1/4 mile) run. • T o clear the vehicle’s best 1/8 mile (1/4 mile) run, press and hold the FUNCTION SELECT button for five seconds.
Compass Display The compass readings indicate the dir ection the vehicle is facing. Press and r elease the COMP ASS button to display one of eight com- pass readings and the outside temperatur e. Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to set the compass manually .
Compass V ariance Compass V ariance is the difference between magnetic North and geographic North. In some areas of the country , the difference between magnetic and geographic North is great enough to cause the compass to give false readings.
1. T urn the ignition switch ON. 2. Pr ess and hold the COMP ASS button for approxi- mately two seconds. 3. Pr ess the SCROLL button until “Compass V ariance” message and the last variance zone number displays in the EVIC. 4. Pr ess and r elease FUNCTION SELECT button until the proper variance zone is selected accor ding to the map.
The EVIC displays this symbol to indicate an incoming call. The EVIC displays this symbol to indicate that the UConnect 威 phone is currently in analog mode. The EVIC displays this symbol to indicate that the UConnect 威 phone is currently r oaming.
The EVIC displays this symbol to indicate that a phone connection has been made. The EVIC displays this symbol to indicate that the UConnect 威 phone is currently not avail- able. Navigation — If Equipped Navigation Display Control Press and r elease the MENU button until Navigation displays in the EVIC.
Driver-Selectable Surround Sound (DSS) – If Equipped Press and r elease the MENU button until “Surr ound Sound” displays in the EVIC. The EVIC provides infor - mation on the current surr ound mode. • Stereo • V ideo Surround • Audio Surround While in the Surround Sound menu, pr ess the FUNC- TION SELECT button to change surround modes.
Personal Settings (Customer Programmable Features) Personal Settings allows the driver to set and recall features when the transmission is in P ARK. Press and r elease the MENU button until Personal Set- tings displays in the EVIC. Use the SCROLL button to display one of the following choices.
“Remote Key Unlock” When Driver Door 1st Press is selected, only the driver’s door will unlock on the first press of the Remote Keyless Entry (RKE) UNLOCK button. When Driver Door 1st Press is selected, you must pr ess the RKE UNLOCK button twice to unlock the passenger’s doors.
NOTE: T urning the headlights on during the daytime causes the instrument panel lights to dim. T o increase the brightness, refer to “Lights” in Section 3. “Delay T urning Headlights Off” When this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle.
“T urn-by-T urn Navigation” — If Equipped When ON is selected, the T urn-by-T urn directions will appear in the display as the vehicle approaches a desig- nated turn within a programmed r oute. T o make your selection, press and r elease the FUNCTION SELECT button until “ON” or “OFF” appears.
Electrical Disturbances Radio waves may pick up electrical disturbances during transmission. They mainly affect the wave amplitude, and thus remain a part of the AM reception. They interfere very little with the fr equency variations that carry the FM signal.
An auxiliary input jack permits passengers to listen to a portable MP3 player through the vehicle’s speakers. For vehicles equipped with the V ehicle Entertainment System (VES) 威 , separate audio outputs allow passengers to listen to the vehicle speakers while differ ent audio tracks play through the system’s wir eless headphones.
Clock Setting Procedure Setting the Clock 1. T urn on the multimedia system. 2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. T o move the hour forward, touch the screen wher e the word “Hour” with the arr ow pointing upwar d is dis- played.
2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. When this featur e is on, a check mark will appear in the box next to the words “Show T ime if Radio is Off.” T ouch the screen where the wor ds “Show T ime if Radio is Off” ar e displayed to change the curr ent setting.
Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME contr ol knob a second time to turn off the radio.
Phone Button (UConnect 威 Hands-Free Phone) — If Equipped Press this button to operate the Hands-Fr ee Phone (UConnect 威 ) feature (if equipped). Refer to “Hands-Fr ee Communication (UConnect 威 )” in Section 3.
R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows. This featur e operates in AM, FM or Satellite (if equipped) frequencies. TUNE Control T urn the rotary TUNE/SCROLL control knob clockwise to increase or counter clockwise to decr ease the frequency .
or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. Many radio stations do not currently br oadcast Music T ype information.
Program T ype 16-Digit Character Display T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode.
• Audio Stream – Repeatedly pr essing SELECT will switch to differ ent audio languages (if supported on the disc) (if equipped). • Angle – Repeatedly pressing SELECT will change the viewing angle if supported by the DVD disc (if equipped). NOTE: The available selections for each of the above entries varies depending upon the disc.
Enter the four-digit country code using the TUNE/ SCROLL control knob to scr oll up and down to select the number and then push to select. Audio Language — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc).
auto-play the main title. In such cases, use the MENU button on the remote contr ol to select desir ed title to play . NOTE: The user will have to set these defaults before loading a disc. If changes are made to these settings after a disc is loaded, changes will not be effective.
Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play , DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These r egion codes must match in order for the disc to play . If the region code for the DVD disc does not match the region code for the radio DVD player , it will not play the disc.
Eject Button — Ejecting Compact Disc(s) Press the eject button and the pushbutton with the corresponding number (1-6) wher e the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to r emove the disc.
Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however , acceptable MP3/WMA file recording media and formats ar e limited. When writing MP3/WMA files, pay attention to the following restrictions.
If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.
Playlist files are not supported. MP3 Pr o files ar e not supported. Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files.
INFO Button (DISC Mode for MP3/WMA Play) Pressing the INFO button r epeatedly will scr oll through the following T AG information: Song T itle, Artist, File Name, and Folder Name (if available). Press the INFO button once mor e to r eturn to ⬙ elapsed time ⬙ priority mode.
TIME Button (Auxiliary Mode) Press the TIME button to change the display fr om elapsed playing time to time of day . The time of day will display for five seconds.
Macrovision This product incorporates copyright pr otection technol- ogy that is protected by U.S. patents and other intellec- tual property rights. Use of this copyright pr otection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only , unless otherwise authorized by Macrovision.
photos from CDs or thr ough the USB port. The Gracenote database finds the artist, track, and title for the music. An auxiliary input jack permits passengers to listen to a portable MP3 player through the vehicle’s speakers.
2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. If the wor ds “T ime: GPS T ime” are displayed at the top of the scr een, proceed to Step 4.
2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. If the wor ds “T ime: User Clock” are displayed at the top of the screen, proceed to Step 4.
SALES CODE RES — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it.
2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, pr ess the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob.
Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decr ease the mid range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display .
Program T ype 16-Digit Character Display Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Persona.
SETUP Button Pressing the SETUP button allows you to select between the following items: • Set Clock — Pressing the SELECT button will allow you to set the clock. T urn the TUNE/SCROLL contr ol knob to adjust the hours and then press and turn the TUNE/SCROLL control knob to adjust the minutes.
DISC Button Pressing the DISC button will allow you to switch fr om AM/FM modes to Disc modes. Operation Instructions - CD MODE for CD and MP3 Audio Play NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player .
TIME Button Press this button to change the display fr om a lar ge CD playing time display to a small CD playing time display . R W/FF Press the R W button to stop the CD at the beginning of the current CD track/title.
files properly and may be unable to play the file nor - mally . UDF and Apple HFS formats ar e not supported. The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders.
rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specifi- cation Sampling Fre- quency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.
LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob.
TIME Button (Auxiliary Mode) Press this button to change the display to time of day . The time of day will display for five seconds (when ignition is OFF). Operating Instructions - Hands-Free Phone (UConnect 威 ) (If Equipped) Refer to “Hands-Free Communication (UConnect 威 )” in Section 3.
call the toll-free number 888-539-7474, or visit the Sirius web site at www .sirius.com, or at www .siriuscanada.ca for Canadian residents. Please have the following infor - mation available when calling: 1. The Electr onic Serial Number/Sirius Identification Number (ESN/SID).
Satellite Antenna T o ensure optimum reception, do not place items on the roof ar ound the r ooftop antenna location or strap items to the trunk lid ar ound the trunk lid antenna (if equipped). Metal objects placed within the line of sight of the antenna will cause decreased performance.
SCAN Button Pressing the SCAN button causes the tuner to sear ch for the next channel, pausing for eight seconds before con- tinuing to the next. T o stop the search, press the SCAN button a second time. INFO Button Pressing the INFO button will cycle between Artist, Song T itle, and Composer (if available) information.
SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number . This number is used to activate, deactivate, or change the Sirius subscription.
Operating Instructions - Hands-Free Phone (If Equipped) Refer to “Hands-Free Communication (UConnect 威 )” in Section 3. Operating Instructions - Video Entertainment System (VES™) (If Equipped) Refer to separate “V ideo Entertainment System (VES™) Guide.
• The LCD Screen swings up fr om the r ear of the armrest to allow the r ear seat passenger(s) to view the display . NOTE: Close the armrest after the LCD scr een has been raised to its viewing position. • The touch screen radio and DVD player contr ols allow front seat operation for easy setup in the case of younger rear seat passengers.
• A battery-powered infrared r emote contr ol snaps into a molded compartment in the center console armrest upper storage bin. • T wo wireless infrared headsets allow r ear seat passen- gers to listen to the same or individual audio sources.
Kicker 姞 13-speaker High Performance Sound System with Driver-Selectable Surround (DSS) – If Equipped Y our vehicle is equipped with a state of the art audio amplifier that provides 5.
The KMS1 威 V ideo Surround mode activates whenever a video source is selected, unless the system is alr eady in “Audio Surround” mode. DSS modes for video sour ces are “Ster eo,” “Audio Surr ound,” and “V ideo Surround.
Controlling The iPod 姞 Using Radio Buttons T o get into the UCI (iPod 威 ) mode and access a connected iPod 威 , press the AUX button on the radio faceplate. Once in the UCI (iPod 威 ) mode, the iPod 威 audio track (if available from iPod 威 ) will start playing over the vehicle audio system.
Pressing and r eleasing the FF button will go forwar d five seconds of the current track. SEEK Buttons Use the SEEK buttons to move to the previous or the next track.
List or Browse Mode During Play mode, pressing any of the following buttons will take you to List mode. List mode enables you to scroll thr ough the list of menus and tracks on the iPod 威 device. TUNE/SCROLL Knob In the List mode, the TUNE/SCROLL knob functions in a similar manner as the scroll wheel on the iPod 威 .
After pressing a pr eset button, you will see the list you are in on the top line and the first item in that list on the second line. T o exit the List mode without selecting a track, press the same preset button again to go back to Play mode. LIST Button Pressing the LIST button will take to the top level menu of the iPod 威 .
V ehicles equipped with steering wheel-mounted buttons are also equipped with the Electr onic V ehicle Information Center (EVIC). The EVIC features a driver -interactive display . This is located in the instrument cluster below the speedometer . The VOLUME button controls the sound level of the sound system.
CD/DVD DISC MAINTENANCE T o keep the CD/DVD discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge.
Manual Air Conditioning and Heating System Blower Control The rotary knob on the left contr ols the blower . The control has an OFF posi- tion and four speed settings. The blower will remain on until the con- trol is turned to the OFF position or the ignition is turned OFF .
Mode Control The rotary knob on the right contr ols airflow distribution. Dots between each of the mode selections identify intermediate modes that allow the op- erator to fine-tune airflow distribu- tion. The mode settings are as follows: • Defrost Air is directed to the windshield thr ough the outlets at the base of the windshield.
• Recirculation Contr ol The mode control knob also contr ols the recir culation featur e. Y ou can choose Bi- Level Recirculation air outlets, Panel Recir - culation air outlets, or a mix or both while in this mode. Normally , air enters from outside the vehicle.
the controls on the climate contr ol, fr om a dual sun- sensor located in the top of the instrument panel, fr om an infrared sensor located in the face of the climate contr ol, and from various sensors located thr oughout the vehicle. The controls on the climate contr ol pr ovide the system with operator input.
Air conditioning in this system is automatic. Pressing the air conditioning contr ol button while in AUTO mode will cause the LED in the control button to flash three times and then turn of f. This indicates that the system is in AUTO mode and r equest- ing the air conditioning is not necessary .
Manual Operation This system offers a full complement of manual override features, which consist of blower pr eferr ed automatic, mode preferr ed automatic, or blower and mode pr eferred automatic. This means the operator can override the blower , the mode, or both.
UNDERST ANDING YOUR INSTRUMENT P ANEL 251 4.
The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Contr ol knob (on the right) to one of the following positions. • Defrost Air is directed to the windshield thr ough the outlets at the base of the windshield.
turn off the air conditioning. An LED in the button illuminates when manual compressor operation is selected. NOTE: T o control the air conditioning manually , the mode selector must be moved out of the AUTO position. • Recirculation Contr ol This button can be used to block out smoke, odors, dust, high humidity , or if rapid cooling is desired.
W inter Operation Use of the air Recirculation mode during W inter months is not recommended because it may cause window fogging. V acation Storage Any time you store your vehicle or keep it out of service (i.
Control Setting Suggestions for V arious W eather Conditions UNDERST ANDING YOUR INSTRUMENT P ANEL 255 4.
REAR WINDOW FEA TURES Electric Rear Window Defroster The Electric Rear W indow Defroster control is located on the climate control. Pr ess this button to turn ON the rear window defr oster and the heated outside rearview mirr ors (if equipped). An LED in the button will illuminate when the rear window defr oster is ON.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es ..................... 2 6 1 ▫ Automatic T ransmission ................ 2 6 2 ▫ Normal Starting (T ip Start) .............. 2 6 3 ▫ Extremely Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) .
▫ T raction ............................ 2 7 6 䡵 Driving Through W ater .................. 2 7 7 ▫ Flowing/Rising W ater .................. 2 7 7 ▫ Shallow Standing W ater ................. 2 7 7 䡵 Parking Brake ......................... 2 7 9 䡵 Brake System .
▫ L i f e O f T i r e ......................... 3 0 5 ▫ Replacement T ires ..................... 3 0 6 ▫ Alignment And Balance ................. 3 0 7 䡵 T ire Chains ........................... 3 0 7 䡵 Snow T ires ...........................
▫ Gross V ehicle W eight Rating (GVWR) ....... 3 2 8 ▫ Gross Axle W eight Rating (GA WR) ......... 3 2 8 ▫ Overloading ......................... 3 2 8 ▫ Loading ............................ 3 2 9 䡵 T r a i l e r T o w i n g .................
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! • Never leave children alone in a vehicle.
Automatic T ransmission The shift lever must be in the NEUTRAL or P ARK position before you can start the engine. Apply the brakes before shifting into any driving gear . CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop.
Normal Starting (Tip Start) NOTE: Normal Starting of either a cold or a warm engine is obtained without pumping or depressing the accelerator pedal. Do not press the accelerator . Use the Fob with Integrated Key to briefly turn the ignition switch to the ST AR T position and release it as soon as the starter engages.
If Engine Fails T o Start W ARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury . • Do not attempt to push or tow your vehicle to get it started.
After Starting The idle speed is controlled automatically and it will decrease as the engine warms up. ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather . Connect the cord to a standard 1 10-1 15 V olt AC electrical outlet with a grounded, thr ee-wir e extension cord.
W ARNING! It is dangerous to move the shift lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something.
• The electronically-contr olled transmission pr ovides a precise shift schedule. The transmission electr onics ar e self-calibrating. Therefor e, the first few shifts on a new vehicle may be somewhat abrupt or soft until after the break-in period. This is a normal condition, and pr e- cision shifts will develop within a few shift cycles.
change the way it shifts to help control the condition. This may result in a slightly dif fer ent feeling or response during normal operation in DRIVE position.
with a small flat blade screwdriver or alike. While pressing the override, move the shift lever out of the P ARK position. When complete, return the rubber tray to its original position. 5-Speed Automatic T ransmission Shifting from DRIVE to P ARK or REVERSE should be done only after the accelerator pedal is released and the vehicle is stopped.
When parking on a flat surface, place the shift lever in the P ARK position first, and then apply the parking brake. When parking on a hill, it is important to set the parking brake before placing the shift lever in P ARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of P ARK.
NEUTRAL In NEUTRAL, no power is transmitted from the engine to the drive axle. When the brakes are r eleased, the vehicle can be moved freely (pushed or towed). Do not engage NEUTRAL position while driving except to coast when the vehicle is in danger of skidding (e.
under heavy loading conditions (in hilly terrain, travel- ing into strong head winds, or while towing heavy trailers, use the AutoStick 威 mode and select the “3” range. AutoStick 威 Gear Selection The AutoStick 威 feature can be selected by pr essing the shift lever to the right or the left with the lever in the DRIVE position.
Delayed Shifts in Cold T emperatures During cold temperature operation, you may notice delayed upshifts depending on engine and transmission temperature as well as vehicle speed. This featur e im- proves warm up time of the engine and transmission to achieve maximum efficiency .
Have the transmission checked at your authorized dealer as soon as possible. If the problem has been momentary , the transmission can be reset to r egain all forwar d gears. Permanent T ransmission Limp Home Mode Permanent Limp Home Mode will be activated if the transmission enters temporary Limp Home Mode three times.
NOTE: • In Autostick 威 mode, the transmission will only shift up and down when the driver manually moves the shift lever Right (D+) or Left (D-). • An UPSHIFT message will appear in the Electronic V ehicle Information Center (EVIC) portion of the in- strument cluster when using Autostick 威 .
• T ransmission shifting will be more noticeable when Autostick 威 is engaged. DRIVING ON SLIPPER Y SURF ACES Acceleration Rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the rear wheels to pull errati- cally to the right or left.
DRIVING THROUGH W A TER Driving through water mor e than a few inches/ millimeters deep will requir e extra caution to ensur e safety and prevent damage to your vehicle. Flowing/Rising W ater W ARNING! Do not drive on, or cross, a road or a path where water is flowing and/or rising (as in storm run-off).
CAUTION! • Driving through standing water may cause dam- age to your vehicle’ s drivetrain components. Al- ways inspect your vehicle’ s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water .
P ARKING BRAKE The parking brake should always be applied when the driver is not in the vehicle. W ARNING! Never use P ARK position on an automatic transmis- sion as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage.
The foot operated parking brake is positioned below the lower left corner of the instrument panel. T o apply the parking brake, push the parking brake pedal down and then remove your foot fr om the pedal. T o release the parking brake, push down on the parking brake pedal and then release.
BRAKE SYSTEM Y our vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability , the remaining system will still function.
ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can in- clude ice, snow , gravel, bumps, railroad tracks, loose debris, or panic stops.
All vehicle wheels and tires must be the same size and type and tires must be pr operly inflated to pr oduce accurate signals for the computer . Anti-Lock Brake Light The ABS light monitors the Anti-Lock Brake Sys- tem. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds.
Upon initial start-up in cold weather , the power steering pump may make noise for a short amount of time. This is due to the cold, thick fluid in the steering system. This noise should be considered normal, and it does not in any way damage the steering system.
ABS (Anti-Lock Brake System) This system aids the driver in maintaining vehicle control under adverse braking conditions by controlling hydrau- lic brake pressur e. This pr events wheel lock-up to help avoid skidding on slippery surfaces during braking.
TCS (T raction Control System) This system monitors the amount of wheel spin of each driven wheel. If wheel spin is detected, brake pressur e is applied to the slipping wheel(s) and engine power is reduced to pr ovide enhanced acceleration and stability .
ESP (Electronic Stability Program) This system enhances directional contr ol and stability of the vehicle under various driving conditions. The ESP corrects for oversteering and understeering the vehicle by applying the brake of the appropriate wheel.
W ARNING! The ESP (Electronic Stability Program) cannot pre- vent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The ESP cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
NOTE: T o improve the vehicle’s traction when driving with snow chains, or when starting-off in deep snow , sand, or gravel, it may be desirable to switch to the “Partial Off” mode by momentarily depr essing the “ESP OFF” button.
NOTE: When the ESP is switched of f a featur e of the system remains active. This featur e contr ols wheel spin across an axle quite similarly to a limited slip dif fer ential.
Indicator Light should go out. However , if the light remains on, have the ESP and BAS checked at your authorized dealer as soon as possible. ESP/BAS Malfunction Indicator Light and ESP/TCS Indicator Light The Malfunction Indicator Light for the ESP is combined with the BAS indicator .
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger)-Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tir e sizing is based on Eur opean design standards.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standar ds LT = Light truck tir e based on U.
EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carr.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pr essure is listed on either the face of the driver’s door or the driver’s side B-pillar .
Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loadi.
available cargo and luggage load capacity is 650 lbs (295 kg) {(since 5 x 150 = 750, and 1400 – 750 = 650 lbs (295 kg)}. 5. Determine the combined weight of luggage and car go being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
ST ARTING AND OPERA TING 299 5.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
2. Economy— Improper inflation pr essur es can cause uneven wear patterns to develop across the tir e tr ead. These abnormal wear patterns will reduce tr ead life r esulting in a need for earlier tire r eplacement. Under -inflation, also increases tire r olling r esistance and results in higher fuel consump- tion.
check tire pr essur e. Do not make a visual judgement when determining proper inflation. Radial tir es may look properly inflated even when they ar e under -inflated. CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped).
T ire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tir e inflation pr essure is very important.
Tire Spinning When stuck in mud, sand, snow , or ice conditions, do not spin your vehicle’s wheels above 35 mph (55 km/h). Refer to the paragraph on “Freeing A Stuck V ehicle” in Section 6. W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure.
These indicators are molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tir e should be r eplaced. Many states have laws requiring tir e r eplacement at this point.
Replacement Tires The tires on your new vehicle pr ovide a balance of many characteristics. They should be inspected regularly for wear and correct cold tir e inflation pr essure. The manu- facturer str ongly r ecommends that you use tires equiva- lent to the originals in size, quality and performance when replacement is needed.
CAUTION! Replacing original tires with tires of a different size may result in false speedometer and odometer readings. Alignment And Balance Poor suspension alignment may result in: • Fast tire wear . • Uneven tire wear , such as feathering and one-sided wear .
CAUTION! T o avoid damage to your vehicle or tires, observe the following precautions: • Because of restricted chain clearance between tires and other suspension components, it is important that only chains in good condition are used. Broken chains can cause serious damage.
SNOW TIRES Some areas of the country r equir e the use of snow tires during the winter . Standard tir es are of the all season type and satisfy this requir ement as indicated by the M+S designation on the tire sidewall. If you need snow tires, select tir es equivalent in size and type to the original equipment tires.
Tire Rotation — Standard T ires The suggested rotation method is the “side-to-side” as shown in the following diagram. 310 ST ARTING AND OPERA TING.
Tire Rotation — All Season Tires The suggested rotation method for vehicles equipped with all season tires is the “forwar d-cr oss” as shown in the following diagram.
The tire pr essur e will also increase as the vehicle is driven - this is normal and there should be no adjust- ment for this increased pr essur e. • The TPMS will warn the driver of a low tire pr e.
CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, type, and/or style.
• Seasonal temperature changes will af fect tir e pressur e, and the TPMS will monitor the actual tire pr essur e in the tire. Base System — If Equipped The T ire Pressur e Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pr essur e levels.
vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to r eceive this information. Check TPMS W arning If a system fault is detected, the T ire Pressur e Monitoring T elltale Light will flash on and off for 75 seconds and then remain on solid.
NOTE: V ehicles with Compact Spare 1. The compact spar e tir e does not have a tire pr essur e monitoring sensor . Therefor e, the TPMS will not monitor the pressur e in the compact spar e tire.
• Three T rigger Modules (mounted in three of the four wheel-wells) • V arious tire pressur e monitoring system messages, which display in the Electronic V ehicle Information Center (EVIC) • T ire Pressur e Monitoring T elltale Light The matching full size spare wheel and tir e assembly (if equipped) has a tire pr essur e monitoring sensor .
placard pr essur e value. Once the system receives the updated tire pr essur es, the system will automatically update, the graphic display in the EVIC will stop flash- ing, and the T ire Pressur e Monitoring T elltale Light will turn off.
1. Signal interfer ence due to electr onic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors. 2. Installing aftermarket window tinting that contains materials that may block radio wave signals. 3. Accumulation of snow or ice ar ound the wheels or wheel housings.
2. If you install the compact spar e tir e in place of a road tire that has a pr essur e below the low-pressur e warning limit, upon the next ignition key cycle, the TPM T elltale Light will remain ON and a chime will sound. In addition, the graphic in the EVIC will still display a flashing pressur e value.
The tire pr essur e sensors are cover ed under one of the following licenses: United States ..................... KR5S120123 Canada ...................
The manufacturer supports the use of r eformulated gaso- lines. Properly blended r eformulated gasolines will pr o- vide excellent performance and durability of engine and fuel system components. Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxy- genates such as 10% ethanol, MTBE, and ETBE.
can be used at levels higher than those allowed in the United States. MMT is prohibited in Federal and Califor - nia reformulated gasoline. Materials Added to Fuel All gasoline sold in the United States is requir ed to contain effective deter gent additives.
Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill.
NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door reinfor cement. Fuel Filler Door Gas Cap T ether Hook ST ARTING AND OPERA TING 325 5.
CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the Malfunc- tion Indicator Light (MIL) to turn on.
on if the gas cap is not secured pr operly . Make sure that the gas cap is tightened each time the vehicle is refueled. • When the fuel nozzle “clicks” or shuts off, the fuel tank is full.
• Gross Axle W eight Rating (GA WR) rear • V ehicle Identification Number (VIN) • T ype of V ehicle • Month Day and Hour of Manufacture (MDH) The bar code allows a computer scanner to read the VIN. Gross V ehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle.
Figure out the weight on the fr ont and r ear of the vehicle separately . It is important that you distribute the load evenly over the front and r ear axles. Overloading can cause potential safety hazards and shorten useful service life. Heavier axles or suspension components do not necessarily increase the vehicle’s GVWR.
EXAMPLE ONL Y Front Axle Rear Axle Empty W eight 2054 lbs (932 kg) 1805 lbs (819 kg) Load (including driver , pas- sengers, and cargo) 271 lbs (123 kg) 579 lbs (263 kg) T otal 2325 lbs (1055 kg) 2384 .
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher .................. 3 3 2 䡵 If Y our Engine Overheats ................. 3 3 2 䡵 TIREFIT T ire Repair ..................... 3 3 3 䡵 Jump-Starting Procedur es ................. 3 3 8 䡵 Freeing A Stuck V ehicle .
HAZARD W ARNING FLASHER The HAZARD switch is located in the switch bank near the top center of the instrument panel. De- press the switch to activate the flashers. When activated, all directional turn signals will flash on and of f to warn oncoming traffic of an emer gency .
CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads 240°F (1 16°C) or greater pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range 200– 230°F (93–1 10°C).
The TIREFIT system is located under an access panel in the trunk. 1. Air pump hose 2. Power plug and cable 3. AIR PUMP switch 4. Pr essur e gauge 5. TIREFIT sealant bottle TIREFIT Location TIREFIT con.
6. TIREFIT sealant hose W ARNING! • Do not attempt to repair a tire on the side of the vehicle close to traffic. Pull far enough of f the road to avoid the danger of being hit when operating the jack or repairing a tire. • Cuts or punctures larger than approximately 0.
8. Pr ess the switch (3) on the air pump to I (ON). The air pump should start to inflate the tire and the tir e sealant (white fluid) will flow from the sealant bottle (5) thr ough the TIREFIT sealant hose (6) and into the tire. 9. Allow the air pump to r un for five minutes and then read the pr essur e gauge (4).
19. Release the parking brake and drive the vehicle for approximately 10 minutes to ensur e optimum distribu- tion of the tire sealant within the tir e. 20. T urn on the hazard warning flashers. 21. Move the shift lever to the P ARK position, turn off the engine, and set the parking brake.
NOTE: • If a pressur e of at least 19 psi (1.3 bar) cannot be maintained in the tire, the tir e is too badly damaged. Do not attempt to drive the vehicle further . Call for assistance. • Do not operate the electric air pump for more than eight minutes to avoid overheating.
NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals ar e located in the engine compartment for jump-starting. 1. W ear eye protection and remove any metal jewelry such as watchbands or bracelets that might make an inadvertent electrical contact.
6. Connect the other cable, first to the negative terminal of the booster battery and then to the engine ground (-) of the vehicle with the discharged battery . Make sure you have a good contact on the engine ground. Refer to the following illustration for jump-starting connections.
NOTE: Refer to ⬙ Synchronizing ESP ⬙ under ⬙ Electr onic Stability Program ⬙ in Section 5 if the ESP/BAS light (in the instrument cluster) r emains on continuously after starting the engine of the vehicle with the discharged battery . 8. When r emoving the jumper cables, r everse the above sequence exactly .
CAUTION! • When “rocking” a stuck vehicle by moving be- tween “1st” and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • Racing the engine or spinning the wheels too fast may lead to transmission overheating and failure.
T owing This V ehicle Behind Another V ehicle (Flat T owing With All Four Wheels On The Ground) Flat towing of vehicles equipped with an automatic transmission, is only permitted within the following .
If you must use the accessories (wipers, defrosters, etc.) while being towed, the key must be in the ON position, not the ACC position. Make certain the transmission remains in NEUTRAL. T owing This V ehicle Behind Another V ehicle With A T ow Dolly The manufacturer does not recommend that you tow this vehicle on a tow dolly .
MAINT AINING YOUR VEHICLE CONTENTS 䡵 6.1L Engine Compartment ................ 3 4 8 䡵 Onboard Diagnostic System — OBD II ........ 3 4 9 ▫ Loose Fuel Filler Cap .................. 3 4 9 䡵 Emissions Inspection And Maintenance Programs ........
▫ Power Steering — Fluid Check ............ 3 6 2 ▫ Front And Rear Suspension Ball Joints ...... 3 6 2 ▫ Steering Linkage ...................... 3 6 3 ▫ Body Lubrication ..................... 3 6 3 ▫ W indshield W iper Blades .............
▫ License Light ........................ 3 9 4 䡵 Fluids And Capacities ................... 3 9 5 䡵 Fluids, Lubricants, And Genuine Parts ........
6.1L ENGINE COMP ARTMENT 1 — Remote Jump-Start Positive Battery Post 6 — Power Steering Fluid 2 — Fuses (Front Power Distribution Center) 7 — Air Cleaner Filter 3 — Coolant Pressur e Cap 8 .
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
TRIP ODOMETER button to turn of f the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the MIL.
5. Appr oximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition key or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
AUTHORIZED DEALER SERVICE Y our authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner . Service manuals are available which include detailed service information for your vehicle.
These items should be inspected if a malfunction is observed or suspected. Engine Oil Checking Oil Level T o assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop.
Change Engine Oil Refer to the Maintenance Schedule in Section 8. NOTE: Under no circumstances should oil change intervals exceed 6,000 mi (10 000 km) or six months, whichever occurs first.
The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to the “Engine Com- partment” illustration in this section.
Inspect belts for evidence of cuts, cracks, glazing, or frayed cords and r eplace if ther e is indication of damage that could result in belt failur e. Also, check belt routing to make sure ther e is no interfer ence between the belts and other engine components.
Fuel Filter A plugged fuel filter can cause stalling, limit the speed at which a vehicle can be driven or cause hard starting. Should an excessive amount of dirt accumulate in the fuel tank, filter replacement may be necessary . See your authorized dealer for service.
W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn.
NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals ar e located in the engine compartment for jump-starting. W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing.
CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked posi- tive (+) and negative (-) and identified on the battery case.
W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs.
filter . Install the new filter with arrows pointing in the direction of airflow , which is toward the rear of the vehicle (text and arrows on the filter indicate this). Refer to the Maintenance Schedule in Section 8 for the recommended air conditioning filter replacement inter- vals.
Steering Linkage The tie rod end ball joints should be inspected for external leakage or damage when other maintenance is performed. Body Lubrication Locks and all body pivot points, including seat tr.
Windshield W ashers The windshield washer fluid reservoir is located in the front of the engine compartment. Be sur e to check the fluid level in the reservoir at r egular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water .
to seep into the passenger compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace as requir ed. W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless.
Coolant Checks Check engine coolant (antifreeze) pr otection every 12 months (before the onset of fr eezing weather , where applicable). If coolant is dirty or rusty in appearance, the system should be drained, flushed and refilled with fr esh coolant.
CAUTION! • Mixing of coolants other than specified HOA T engine coolants, may result in engine damage and may decrease corrosion protection. If a non-HOA T coolant is introduced into the cooling system in an emergency , it should be replaced with the speci- fied coolant as soon as possible.
• Use only high purity water such as distilled or deion- ized water when mixing the water/engine coolant solution. The use of lower quality water will reduce the amount of corrosion pr otection in the engine cooling system.
Disposal of Used Coolant Used ethylene glycol-based engine coolant is a regulated substance requiring pr oper disposal. Check with your local authorities to determine the disposal rules for your community .
• Do not overfill the coolant recovery bottle. • Check coolant freeze point in the radiator and in the coolant recovery bottle. If antifr eeze needs to be added, contents of coolant recovery bottle must also be protected against fr eezing.
Ensure nylon tubing in these ar eas has not melted or collapsed. Inspect all hose connections such as clamps and cou- plings to make sure they ar e secur e and no leaks are present. Components should be replaced immediately if ther e is any evidence of wear or damage that could cause failure.
Brake and Power Steering Hoses When the vehicle is serviced for scheduled maintenance, inspect surface of hoses and nylon tubing for evidence of heat and mechanical damage. Hard and brittle r ubber , cracking, tears, cuts, abrasion, and excessive swelling indicate deterioration of the rubber .
Master Cylinder - Brake Fluid Level Check Check the fluid level in the master cylinder immediately if the brake system warning light indicates system fail- ure. Check the fluid level in the master cylinder when per- forming underhood services. Clean the top of the master cylinder area befor e r emoving the cap.
CAUTION! Do not allow petroleum-based fluid to contaminate the brake fluid. Seal damage may result. Automatic T ransmission Fluid Level Check Regular automatic transmission fluid level checks are not requir ed. For this r eason, the dipstick is omitted.
Fluid and Filter Changes Refer to the Maintenance Schedule in Section 8 for the recommended transmission fluid and filter change inter - vals. If the transmission is disassembled for any reason, the fluid and filter should be changed.
highly corrosive to the metal in your vehicle. Outside parking, which exposes your vehicle to airborne contami- nants, road surfaces on which the vehicle is operated, extreme hot or cold weather and other extr eme condi- tions will have an adverse effect on paint, metal trim, and underbody protection.
CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder that will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the under carriage at least once a month.
heavy soil and/or excessive brake dust, use Mopar 威 Wheel Cleaner (05066247AB) or equivalent or select a nonabrasive, non-acidic cleaner . Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Only Mopar 威 or equivalent is recommended.
Cleaning Headlights Y our vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass and ther efor e differ ent lens cleaning pr ocedures must be followed.
Seat Belt Maintenance Do not bleach, dye, or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the belts need cleaning, use Mopar 威 T otal Clean, a mild soap solution, or lukewarm water .
CAUTION! • When installing the power distribution center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure.
Cavity Car- tridge Fuse Mini- Fuse Description 10 30 Amp Pink — W indshield W iper 1 1 30 Amp Pink — Anti-Lock Brake System (ABS) V alves 12 40 Amp Green — Radiator Fan 13 50 Amp Red — Anti-Lo.
Fuses (Rear Power Distribution Center) There is also a power distribution center located in the trunk under the spar e tire access panel. This center contains fuses and relays.
CAUTION! • When installing the power distribution center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure.
Cavity Car- tridge Fuse Mini- Fuse Description 8 — 15 Amp Blue Diagnostic Link Connec- tor (DLC)/W ireless Con- trol Module (WCM)/ W ireless Ignition Node (WIN) 9 — 20 Amp Y ellow Power Outlet 10 .
Cavity Car- tridge Fuse Mini- Fuse Description 28 — 10 Amp Red Ignition Run 29 — 5 Amp Orange Cluster/Electronic Sta- bility Program (ESP)/ Powertrain Control Module (PCM)/STOP LIGHT Switch 30 —.
Cavity Car- tridge Fuse Mini- Fuse Description 40 — 5 Amp Orange Auto Inside Rearview Mirror/Heated Seats - if equipped/Switch Bank 41 — 10 Amp Red AC Heater Control/ Headlights/T ire Pres- sure M.
REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb Number Rear Courtesy/Reading Lights .............. W 5 W Rear Compartment (T runk) Light ............. 5 6 2 Overhead Console Reading Lights ............. 5 7 8 V isor V anity Lights ..............
BULB REPLACEMENT Low Beam Headlight, High Beam Headlight, Park/T urn Light, and Front Side Marker Light 1. Open the hood. NOTE: Removal of the air cleaner filter housing may be necessary prior to replacing bulbs in the headlight assem- bly on the driver side of the vehicle.
3 — Park/T urn Light Bulb 4 — Side Marker Light Bulb 390 MAINT AINING YOUR VEHICLE.
CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. Backup Light, Side Marker Light, T ail/T urn Light, and T ail/Stop Light 1.
6. Disconnect the electrical connector . 7. Pull the tail light assembly clear fr om the vehicle to access the bulbs. 8. T urn the appropriate bulb and socket assembly coun- terclockwise to r emove it fr om the tail light assembly .
2 — Side Marker Light Bulb 3 — T ail/T urn Light Bulb MAINT AINING YOUR VEHICLE 393 7.
9. Disconnect the bulb fr om the socket assembly and install the replacement bulb. 10. Reinstall the bulb and socket assembly into the tail light assembly , and then turn it clockwise. 1 1. Reinstall the tail light assembly , fasteners, electrical connector , and trunk liner .
4. Reinstall the bulb and socket assembly . 5. Reattach the light to the r ear fascia, and then install the screws. FLUIDS AND CAP ACITIES U.S. Metric Fuel (approximate) 6.1 Liter Engine 19 gal 72 l Engine Oil with Filter 6.1 Liter Engine (SAE 0W -40) 7 qts 6.
FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluids, Lubricants, and Genuine Parts Engine Coolant Mopar 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent Engine Oil (6.
Chassis Component Fluids, Lubricants, and Genuine Parts Automatic T ransmission Mopar 威 A TF+4 Automatic T ransmission Fluid Brake Master Cylinder Mopar 威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable.
.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ....... 4 0 0 䡵 Maintenance Schedule ................... 4 0 0 ▫ Severe Duty .
EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services, listed in bold type , must be done at the times or mileages specified to ensure the continued pr oper functioning of the emission control system.
At Each Stop for Fuel • Check the engine oil level. Refer to “Engine Oil” under “Maintenance Procedur es” in Section 7. • Check the windshield washer solvent and add if requir ed. Once a Month • Check tire pr essur e and look for unusual wear or damage.
Severe Duty If your vehicle is operated under the Severe Duty condi- tions listed below change your engine oil and filter every 3,000 mi (5 000 km) or three months as indicated in the Maintenance Schedule. • Stop and go driving. • Driving in dusty conditions.
Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the engine oil .
Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Replace the air conditioning filter (if equipped). 12,000 20 000 12 Inspect the rear axle fluid. 18,000 30 000 18 Inspect the CV joints.
Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Inspect and replace PCV valve if necessary . 90,000 150 000 90 Flush and replace the engine coolant. 102,000 170 000 60 Replace the spark plugs.
.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V e h i c l e .............................. 4 0 9 ▫ Prepar e For The Appointment ............ 4 0 9 ▫ Prepar e A List ........................ 4 0 9 ▫ Be Reasonable W ith Requests .
䡵 Publication Order Forms .................. 4 1 3 䡵 Department Of T ransportation Uniform T ir e Quality Grades ........................ 4 1 5 ▫ T readwear .......................... 4 1 5 ▫ T raction Grades ...................... 4 1 5 ▫ T emperature Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
special tools, and the latest information to ensure your vehicle is fixed correctly and in a timely manner . This is why you should always talk to your authorized dealer’s service manager first.
Customer Assistance for the Hearing or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center .
W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
T o contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY : 1–800–424– 9153), or go to http://www .safercar .gov; or write to: Administrator , NHTSA, 400 Seventh Street, SW ., W ash- ington, D.C. 20590.
• Diagnostic Procedure Manuals Diagnostic Procedur e Manuals ar e filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and technicians to find and fix problems on computer -contr olled ve- hicle systems and features.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tire’s manufactur er in each category is shown on the sidewall of the tires on your vehicle.
T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tir e’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10.
About Y our Brakes .................... 279,281 ABS (Anti-Lock Brake System) ............ 281,285 Adding Engine Coolant (Antifreeze) .......... 3 6 7 Adding Fuel ........................... 3 2 4 Adding W asher Fluid .................. 134,364 Additives, Fuel .
Auto Down Power W indows ................ 3 3 Auto Unlock, Doors ....................... 2 9 Auto Up Power W indows .................. 3 3 Automatic Dimming Mirror ................. 8 2 Automatic Door Locks ................... 2 8 , 2 9 Automatic Headlights .
Brake System ........................ 281,371 Anti-Lock (ABS) .................... 281,285 Fluid Check ....................... 373,397 Hoses .............................. 3 7 2 Master Cylinder ....................... 3 7 3 Parking ...................
Cleaning Wheels ............................. 3 7 7 W indshield W iper Blades ................. 3 6 3 Climate Control ......................... 2 4 4 C l o c k ........................ 196,199,214,218 C o i n H o l d e r ........................... 1 5 5 Cold W eather Operation .
Daytime Brightness, Interior Lights ........... 1 3 1 Daytime Running Lights ................... 1 2 8 Dealer Service .......................... 3 5 2 Deck Lid, Emergency Release ................ 3 7 Deck Lid, Power Release ................... 3 6 Defroster , Rear W indow .
Emergency , In Case of Freeing V ehicle When Stuck ............... 3 4 1 Hazard W arning Flasher ................. 3 3 2 Jump Starting ......................... 3 3 8 Overheating .......................... 3 3 2 T o w i n g ...........................
Exterior Lighting ........................ 1 2 5 Exterior Lights .......................... 7 6 Filler Location Fuel ...................... 3 2 4 Filters Air Cleaner .......................... 3 5 6 Air Conditioning .................... 254,361 Engine Fuel .
F i l t e r ............................... 3 5 7 Gasoline ............................ 3 2 1 Gauge .............................. 1 6 5 Hoses .............................. 3 7 1 Materials Added ....................... 3 2 3 Methanol ................
Headlight W ashers ....................... 3 6 4 Headlights Automatic ........................... 1 2 6 Bulb Replacement ...................... 3 8 9 Cleaning ............................ 3 7 9 D e l a y .............................. 1 2 7 High Beam/Low Beam Select Switch .
Interior Lights .......................... 1 3 0 Intermittent W ipers (Delay W ipers) ........... 1 3 2 Introduction ............................. 4 Jump Starting .......................... 3 3 8 Key , Programming ........................ 1 7 Key , Replacement .
Engine T emperature W arning .............. 1 6 7 Exterior .............................. 7 6 F o g ............................. 128,169 Hazard W arning Flasher ................. 3 3 2 Headlight Switch ...................... 1 2 5 Headlights ........
Auto Unlock .......................... 2 9 Automatic Door ........................ 2 8 Child Protection ........................ 3 0 Door ................................ 2 6 Power Door ........................... 2 8 Low T ire Pressur e System ......
Navigation Radio ........................ 2 1 3 Navigation System ....................... 2 1 3 New V ehicle Break-In Period ................ 7 2 Occupant Restraints ....................... 3 8 Octane Rating, Gasoline (Fuel) ............ 321,396 Odometer .
Phone, Hands-Free (UConnect™) ........ 8 5 , 213,214 Placard, T ire and Loading Information ......... 2 9 6 Port Universal Serial Bus (USB) ............. 194,213 U S B ............................. 194,213 Power Brakes ..............................
Rearview Mirrors ........................ 8 1 Reception, Radio ........................ 1 9 3 Reclining Front Seats ..................... 1 1 8 Recorder , Event Data ...................... 6 1 Recreational T owing ...................... 3 3 0 Reformulated Gasoline .
Seat Belts .......................... 3 8 , 3 9 , 7 5 Adjustable Upper Shoulder Anchorage ........ 4 3 And Pregnant W omen ................... 4 7 Child Restraint ................... 6 3 , 6 4 , 6 5 , 7 0 Extender ............................. 4 7 Front Seat .
Shoulder Belt Upper Anchorage .............. 4 3 Shoulder Belts ........................... 3 9 Side Airbag ........................... 4 9 , 5 6 Side Curtain (W indow Airbag) ............... 4 9 Signals, T urn ...................... 7 6 , 129,167 Slippery Surfaces, Driving On .
Sunroof Maintenance ..................... 1 5 1 Supplemental Restraint System - Airbag ........ 4 8 System, Navigation ...................... 2 1 3 System, Remote Starting .................... 2 4 T achometer ............................ 1 6 5 T elescoping Steering Column .
S p i n n i n g ............................ 3 0 4 T read W ear Indicators ................... 3 0 4 T o Open Hood .......................... 1 2 3 T o w i n g ............................... 3 3 0 24-Hour T owing Assistance ................ 9 8 Behind a Motor Home .
Universal T ransmitter ..................... 1 4 1 Unleaded Gasoline ....................... 3 2 1 Untwisting Procedur e, Seat Belt .............. 4 4 USB Port ........................... 194,213 V acuum/V apor Harnesses ................. 3 7 0 V a n i t y M i r r o r s .
W indshield Defroster ................ 7 6 , 246,252 W indshield W ashers ................ 132,133,364 F l u i d ............................... 3 6 4 W indshield W iper Blades .................. 3 6 3 W indshield W ipers ....................... 1 3 2 W iper Blade Replacement .
INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to pr ovide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel.
Char ger SR T8 OWNER’ S MANUAL 2008 2008 Charger SR T8 81-226-0821 First Edition Printed in U.S.A..
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Dodge 2008 LX/DX-48 Charger SRT8 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Dodge 2008 LX/DX-48 Charger SRT8 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Dodge 2008 LX/DX-48 Charger SRT8, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Dodge 2008 LX/DX-48 Charger SRT8 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Dodge 2008 LX/DX-48 Charger SRT8, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Dodge 2008 LX/DX-48 Charger SRT8.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Dodge 2008 LX/DX-48 Charger SRT8. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Dodge 2008 LX/DX-48 Charger SRT8 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
