Manuel d'utilisation / d'entretien du produit BB 1350 du fabricant Delta
Aller à la page of 40
1 OPERA TING MANUAL FULL Y AUTOMA TIC BREADMAKER FOR ALL KINDS OF BREAD DOUGHS, BB 1350 Please read the instructions car efully before using the machine. Y ou will find a range of important and useful hints. Please keep the operating manual in a safe place and pass it on with the machine to other users.
2 For technical reasons this page is empty.
3 T ABLE OF CONTENTS Page CE Declaration of Conformity ................................................................................................4 General notes on safety ..........................................................................
4 CE DECLARA TION OF CONFORMITY Hans-Ulrich Petermann GmbH & Co. KG hereby declar es that this pro- duct complies with the following EU Directives: 73/23/EC, 89/336/EC and 89/109/EC and that this is confirmed by the CE marking. The equipme nt meets the requirements of German Law on equipm ent safe ty .
5 GENERAL SAFETY ADVICE This appliance may only be connected to a properly installed and protected power outlet with supply voltage in accordance with the identification label.
6 SPECIAL NOTES ON SAFETY WHEN USING BREADMAKERS Do not stand the equipment on hot surfaces or near sour ces of heat. It should not be placed beneath wall cupboards or too near the wall, to avoid a build-up of heat.
7 The surface of the equipment lid may become hot to the touch. Proceed with care. T o remove the dough container always use an oven cloth or glove. Do not relocate the equipment when the dough container is full of hot liquid (jam). THE EQUIPMENT CAN BE USED FOR: 1) Kneading dough, e.
8 ITEMS SUPPLIED 1 Breadmaker 2 Kneading hooks and 1 baking pan 1 Measuring beaker 1 Measuring scoop (teaspoon/tab- lespoon) 1 T ool to remove baked-in kneading hooks 1 Operating manual without illust.
9.
10 Preparation times Program T otal time ** Program sequence *Adding of ingredients at point ** possible only with these pr ograms Program run time calculated without heat r etention time.
11 DESCRIPTION OF EQUIPMENT I A B C D E F G H Breadmaker: A) Casing lid B) Control panel C) ON/OFF switch D) “COOL TOUCH” casing E) Baking pan, non-stick coated F) Baking chamber G) Handle for rem.
12 Operating buttons: J) LCD display K) Select button [“Bread size”] L) Select button for degree of br owning [“Colour”] M) Select button [“Time +”] N) Select button [“Time –”] O) Se.
13 The relatively long time of 2-3 seconds prevents you from ending the program pre - maturely by touching the “Start/Stop” button inadvertently . Select button Please note that for programs marked with a star (*) the stirrer has a built-in delay (preheating function).
14 3 = French*: This program is used to process doughs with longer standing phases. For light, crustier breads made of white, heavily gr ound flour (mostly T ype 405). 4 = Rapid*: This program is used for making breads quickly . This program has no facility for baking the bread later; see list of possible pr ogram variations on Page 9.
15 Select button for degree of br owning This button is used to select the desired crust colour: light, medium or dark. Every time the bu tton i s pressed the arrow in the LCD display moves up one browning level. Select button This button is used to select the desired bread weight.
16 Example: It is now 20:30 and you would like the bread to be ready for the next mor ning at 7:00, i.e. in 10 hours and 30 minutes’ time. First of all select the desired program, the de- gree of browning and the desired loaf size. Then press the “Time +” button or “Time –” button until “10:30” appears in the digital display .
17 AMBIENT CONDITIONS The breadmaker will function WITHOUT any problems within a wide range of tem- peratures but there may be differ ences in the size of the loaf if the room is very hot or very cold. The best results will be obtained at room temperatures between 15 and 34oC.
18 BEFORE USING FOR THE FIRST TIME Carefully r emove the breadmaker from its packaging and clean the baking pan, the kneading hooks, the measuring beaker , the measuring scoop and the removal tool in hot water using washing-up liquid or alternatively in a dishwasher (see also notes in the CLEANING section).
19 3) Now place the chosen ingredients into the dough container . T ake the greatest possible care when using the baking pan. When adding the ingredients always take the baking pan out of the machine, to avoid spilling onto the baking chamber .
20 13) At the end of the program you will hear about 8 – 10 bleeps. This signals the end of the program and the machine has now switched to heat retention mode. If you would like to take the br ead out immediately pr ess the “Start/Stop” button for about 2-3 seconds to end the program manually .
21 HELPFUL HINTS ➤ Ensure that all ingredients are at about the same temperature. Room temperature to lukewarm (18oC to 23oC) is best. ➤ When using very soft water the fermenting process of the yeast is heightened, i.
22 ➤ Under no circumstances use too much yeast or baking powder . The dough might overflow . Also the bread could push against the lid if it rises too much. ➤ The use of fresh yeast may have a negative effect on the desired baking r esult. Therefor e use only dried yeast to produce the dough.
23 TIPS REGARDING RECIPES Pleas use the measuring scoops included in the following way: The small measuring scoop (teaspoon) is equivalent to a level teaspoon The large measuring scoop (tablespoon) is equivalent to a level tablespoon Even slight deviations when adding ingredients may have a considerable effect on baking results.
24 Recipes: Here ar e some recipe suggestions for your br eadmaker . Please always add the ingredients in the order given. Ensure that the dried yeast does not come into contact with liquid. The recipes in this instruction manual assume that the content of a sachet of dried yeast is 7 g.
25 White bread (Pr ogram 3: “French”) Potato bread (Pr ogram 4 “Rapid”).
26 French herb br ead (Program 4: “Rapid”) Pizza dough (Program 4: “Rapid”).
27 Wholegrain bread (Pr ogram 5: “Whole wheat”) Cinnamon raisin nut bread (Pr ogram 6: “Sweet”).
28 Christmas bread (Pr ogram 6: “Sweet”) Sandwich bread (Pr ogram 10: “Sandwich”).
29 Jam (Program 9: “Jam”) Good luck! Gluten free br ead (Program 11: “Gluten fr ee”).
30 Own recipes.
31 Own recipes.
32 CLEANING Before cleaning always pull out the plug and allow the machine to cool down! Wipe the outside of the machine with a damp well-wrung cloth and then rub dry .
33 T able of faults.
34 TROUBLESHOOTING - The breadmaker is not heating up property . > The lid is not closed cor - rectly . >> Close the lid correctly so that the heat cannot escape. - It is very difficult to remove bread fr om the baking pan. > The axles of the kneading hook drive were not gr ea- sed before use with mar - garine suitable for baking.
35 - The LCD display shows “ ” after switching on and the equipment gives 5 bleeps. “ >The ambient temperature is too cold for the yeast in the bread dough. >> Switch the equi pment off. Set up again in a warmer place. After about 1 hour a llow the equipment to o perate again.
36 - The bread is not fully ba- ked. > Possibly the incorrect program was chosen. >> Place the bread back in the pan and rebake using Program “8”. - After cutting, the bread is hollow inside. > T oo much water used. >> Put in less water .
37 - The crust is too thick and the degree of br owning is too dark when making cakes or foods with heavy sugar content. > Differ ent recipes or ingr e- dients have a major effect on results.
38 GUARANTEE CONDITIONS Y our appliance is covered by guarantee for a period of 3 years. This guarantee does not cover defects caused by incorrect connection, the use of attachments supplied by other manufactures, normal wear and tear , the use of force, your own attempts at repairs, or damage caused by improper use.
39 If you requir e more kneading hooks or a new baking pan you can order these at a reasonable cost fr om our service address (see page 38). DISPOSAL When the machin e is no longer servic eable unplu .
40 © HUP GmbH & Co. KG BB 1350.06-E 07/06.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Delta BB 1350 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Delta BB 1350 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Delta BB 1350, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Delta BB 1350 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Delta BB 1350, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Delta BB 1350.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Delta BB 1350. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Delta BB 1350 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
