Manuel d'utilisation / d'entretien du produit CMC19410 du fabricant Curtis Mathes
Aller à la page of 44
CMC13410 CMC19410 TV/VCR Combination Unit Owner ’ s Manual CMC13410/19410 3/28/02 11:02 AM Page 1.
2 I MPOR T ANT S AFETY I NSTRUCTIONS I MPOR T ANT S AFETY I NSTRUCTIONS Save These Instructions Warning! Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 I MPOR T ANT S AFETY I NSTRUCTIONS I MPOR T ANT S AFETY I NSTRUCTIONS Save These Instructions I MPOR T ANT S AFETY I NSTRUCTIONS Important Safety Information, continued • Do not place the TV/VCR on an unstable cart, stand, tripod, bracket, or table.
I MPOR T ANT S AFETY I NSTRUCTIONS 4 I MPOR T ANT S AFETY I NSTRUCTIONS Save These Instructions Important Safety Information, continued • Ground outdoor antennas.
C ONTENTS 5 C ONTENTS Chapter 1: Learning About Y our New TV/VCR ..................7 List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Checking Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C ONTENTS 6 C ONTENTS Chapter 5: Special Features .................................................30 Using T rue Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Using Block Repeat . . . . . . . . . . . . . . . . . . . . . . .
7 C HAPTER O NE : L EARNING ABOUT Y OUR N EW TV/VCR List of Features Y our TV/VCR was designed and engineered using the latest technology . This TV/VCR is a full-featured, high-performance unit that not only meets, but exceeds, industry standards.
8 C HAPTER O NE : L EARNING ABOUT Y OUR N EW TV/VCR Understanding the Controls Front Panel Controls & Jacks The buttons on the front panel control basic features. For more advanced features, you will use the remote control. 1 VIDEO and AUDIO IN jacks Connect components, such as a camcorder , to these jacks.
9 C HAPTER O NE : L EARNING ABOUT Y OUR N EW TV/VCR L EARNING ABOUT Y OUR N EW TV/VCR Understanding the Controls, continued Rear Panel 1 VHF antenna mount VHF rod antenna mount. See page 6. 2 Antenna terminal Use this terminal (VHF/UHF IN FROM ANT) to connect the TV/VCR to a 75-ohm outdoor antenna or cable system.
10 C HAPTER O NE : L EARNING ABOUT Y OUR N EW TV/VCR Understanding the Controls, continued Remote Control Use the remote control within 33 feet (10 meters) of the TV/VCR and point it directly at the TV/VCR. 1 POWER Press to turn the TV/VCR on and off.
11 C HAPTER O NE : L EARNING ABOUT Y OUR N EW TV/VCR L EARNING ABOUT Y OUR N EW TV/VCR Understanding the Controls, continued Remote Control Use the remote control within 33 feet (10 meters) of the TV/VCR and point it directly at the TV/VCR. 17 EJECT Press to eject a tape.
12 C HAPTER T WO : I NST ALLA TION C HAPTER T WO I NST ALLA TION Connecting VHF and UHF Antennas If you do not have cable TV , you must connect an antenna to your TV/VCR.
13 C HAPTER T WO : I NST ALLA TION I NST ALLA TION Connecting VHF and UHF Antennas, continued If you use a different 300-ohm antenna with twin flat leads, fol- low the directions below , but skip step 1. 1 Push the stem of the rod antenna into the antenna mount.
I NST ALLA TION 14 C HAPTER T WO : I NST ALLA TION Connecting Cable TV Systems to the TV/VCR, continued 2 Connect one of the coaxial cables between the splitter and the input on the converter box. 3 Connect a second coaxial cable between the output of the converter box and the “B” input on the RF (A/B) switch.
15 C HAPTER T WO : I NST ALLA TION I NST ALLA TION Installing Batteries in the Remote Control 1 Open the battery compartment by pressing down on the back cover’ s tab, then lifting up. 2 Install two AAA size batteries. Make sure to match the + and – ends of the batteries with the diagram inside the compartment.
16 C HAPTER T HREE : TV O PERA TION C HAPTER T HREE TV O PERA TION Viewing the On-screen Display The on-screen display automatically appears on the screen when you turn the TV/VCR on or change its status (from stop to play , from play to stop, etc.). Y ou can also activate the on-screen displays manually by using the remote control.
17 C HAPTER T HREE : TV O PERA TION TV O PERA TION Selecting the Signal Source The first step in programming your TV/VCR is to select the signal source of your antenna or cable TV system. 1 Press MENU to display the menu. 2 Press CH ▼ until “Setup” is highlighted.
TV O PERA TION 18 C HAPTER T HREE : TV O PERA TION Programming the Channels, continued • When entering three-digit channels, press the +100 button on the remote control first. For example, to select channel 104, press +100, then press 0, then 4. Y ou can manually add or erase a channel from your TV/VCR’ s memory .
19 C HAPTER T HREE : TV O PERA TION TV O PERA TION Setting the Clock, continued 5 Press VOL+ to select the minute digits. Press CH ▲ or CH ▼ repeatedly until the correct minute appears. Press VOL+ to finish the clock set. Setting the date 1 Press CH ▼ to select the Date.
TV O PERA TION 20 C HAPTER T HREE : TV O PERA TION Setting the Clock, continued 3 Press CH ▼ until “Auto Clock Set” is selected. Press VOL+. 4 Press VOL+ to select Auto Clock Set “On”. 5 Press CH ▼ to select the “PBS channel”. 6 Press VOL +.
21 C HAPTER T HREE : TV O PERA TION TV O PERA TION Choosing Picture Settings, continued 3 Press CH ▲ or CH ▼ to select Contrast, Brightness, Sharpness, Color , or T int. 4 Press VOL+ or VOL– to change the setting. The setting for the feature appears on the screen.
TV O PERA TION 22 C HAPTER T HREE : TV O PERA TION Setting the Sleep T imer The sleep timer automatically turns off the TV/VCR at the time you select. This is convenient if you like to fall asleep with the television on. 1 Press MENU to display the menu.
23 C HAPTER F OUR : VCR OPERA TION C HAPTER F OUR : VCR O PERA TION Inserting and Ejecting a Video T ape T o insert a video tape: 1 Hold the video tape window- side up, with the arrow pointing away from you. Don’t try to insert a tape upside down or backwards.
24 C HAPTER F OUR : VCR O PERA TION 24 VCR O PERA TION Playing a Video T ape, continued Using Picture Search Picture Search lets you quickly search a pre-recorded video tape for a particular scene. 1 While playing a tape, press and release FF or REW .
25 C HAPTER F OUR : VCR O PERA TION VCR O PERA TION Playing a Video T ape, continued T o return to the scene you marked: 1 Press STOP . 2 Press FF or REW to return to the scene you marked. The TV/VCR stops the tape when the counter reaches “00:00:00.
VCR O PERA TION 26 C HAPTER F OUR : VCR O PERA TION Recording TV Programs as Y ou Watch, continued Editing While Recording Y ou can edit while recording, selecting only those scenes you want to record from the current television program. This is especially helpful if you want to record a program without commercials.
27 C HAPTER F OUR : VCR O PERA TION VCR O PERA TION Using Advanced Recording Features, continued 2 Press CH ▼ until “T imer Record” is selected. Press VOL+. 3 Press VOL+. Press CH ▲ or CH ▼ to select the channel you want to record. Press VOL+ to lock in the channel you’ve chosen.
VCR O PERA TION 28 C HAPTER F OUR : VCR O PERA TION Using Advanced Recording Features, continued 8 Press CH ▼ to select “MO/DA Y .” Press VOL+. Press CH ▲ or CH ▼ to select the month to begin recording. 9 Press VOL+. Press CH ▲ or CH ▼ to select the day to begin recording.
29 C HAPTER F OUR : VCR O PERA TION VCR O PERA TION Using Advanced Recording Features, continued Using Program Review Program Review allows you to review all of the programmed recordings currently stored in the TV/VCR’ s memory and to remove a programmed recording quickly and easily .
30 C HAPTER F IVE : S PECIAL F EA TURES C HAPTER F IVE S PECIAL F EA TURES C HAPTER F IVE : S PECIAL F EA TURES Using T rue Repeat Y ou can set your TV/VCR to automatically repeat a tape or a section of tape. When you use T rue Repeat, your TV/VCR will play until it reaches the end of a tape.
31 C HAPTER F IVE : S PECIAL F EA TURES S PECIAL F EA TURES C HAPTER F IVE : S PECIAL F EA TURES Using Block Repeat, continued 7 When you reach the end of the “block,” press REPEA T again. The TV/VCR will rewind the tape to beginning of the block and repeat it.
32 C HAPTER F IVE : S PECIAL F EA TURES S PECIAL F EA TURES Using the V-Chip The V-Chip feature automatically locks out programming that is deemed inappropriate for children. The user must first enter a PIN (personal ID number) before any of the V-Chip restrictions can be set up or changed.
33 C HAPTER F IVE : S PECIAL F EA TURES Using the V-Chip, continued How to Set up Restrictions Using the “TV guidelines” First, set up a personal identification number (PIN), and enable the V-Chip. (See last sections.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MP AA rating.
34 C HAPTER F IVE : S PECIAL F EA TURES Using the V-Chip, continued 7 How to set the FV , D, L, S and V sub-ratings. First, select one of these TV- Ratings: TV-Y7, TV -PG, TV-14 or TV-MA (See Step 4, above). Next, while the TV-Rating is selected, repeatedly press VOL +.
35 C HAPTER F IVE : S PECIAL F EA TURES C HAPTER F IVE : S PECIAL F EA TURES Using the V-Chip, continued Next, press VOL + to activate the category . While a particular category is selected, press VOL + to activate it. Press MENU to exit the V-Chip menu.
36 C HAPTER F IVE : S PECIAL F EA TURES C HAPTER F IVE : S PECIAL F EA TURES Using Special Playback Features Y our TV/VCR provides you with special features that are available when you are playing a tape. These features are Frame Advance, Skip Search, and Slow Motion.
37 C HAPTER F IVE : S PECIAL F EA TURES Copying, or Dubbing, a Video T o make a copy, or “dub,” of another video tape, you need: • your TV/VCR • a separate VCR (or camcorder) • two A/V cables with connectors. (Y ou can find these at most electronics supply stores.
38 C HAPTER S IX : T ROUBLESHOOTING C HAPTER S IX T ROUBLESHOOTING Identifying TV Problems Poor picture, no picture, blurred picture, or blue screen. • T ry another channel. Make sure the unit is plugged into a working wall outlet. • Adjust the antenna.
A PPENDIX 39 A PPENDIX Caring for Y our TV/VCR Please follow these guidelines to get the maximum performance from your TV/VCR. Placement • Do not place the TV/VCR near extremely hot, cold, humid or dusty places. • Do not place the TV/VCR near appliances with electric motors that create magnetic fields, such as vacuum cleaners.
A PPENDIX 40 A PPENDIX Specifications Format VHS Standard Recording system Rotary , azimuth four -head helical scanning system Luminance: FM azimuth recording Color signal: Converted subcarrier phase shift recording T elevision system NTSC-type color signal EIA Standard (525 lines, 60 fields) Audio track One track T ape width 12.
Curtis Mathes Color T elevision This Curtis Mathes brand product, as supplied and distributed by Curtis Mathes and delivered new , in the original carton to the original consumer purchaser , is warran.
THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO W ARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED W ARRANTIES OF MERCHANT ABILI.
M EMO CMC13410/19410 3/28/02 11:02 AM Page 43.
This product is listed by Underwriter's Laboratories, Inc. It is designed and manufactured to meet rigid U.L. safety standards against X-radiation, fire casualty and electrical hazards. As an ENERGY ST AR® Partner , Curtis Mathes has determined that this product or pr oduct model meets the ENERGY ST AR® guidelines for energy effiency .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Curtis Mathes CMC19410 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Curtis Mathes CMC19410 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Curtis Mathes CMC19410, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Curtis Mathes CMC19410 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Curtis Mathes CMC19410, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Curtis Mathes CMC19410.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Curtis Mathes CMC19410. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Curtis Mathes CMC19410 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
