Manuel d'utilisation / d'entretien du produit 973.11424 du fabricant Craftsman
Aller à la page of 18
Operator's Manual T in., 14.4 VOLT CORDLESS DRILL-DRIV Variable Speed / Reversible Model No. 973.114240 Save this manual for future reference ,_ WARNING" To reduce the risk of injury, the user must read and understand the operator's manual before using this product.
B Warranty ............................................................................................................................................................. 2 B Introduction .................................................................
A& WARNING! READ AND UNDERSTAND ALL | INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/ or serious personal injury. SAVE THESE iNSTRUCTiONS WORK AREA [] Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
[] Use only accessories that are recommended by SERVICE the manufacturer for your model. Accessories that may be suitable for one tool may create a risk of in- jury when used on another tool. Keep the tool and its hand(e dry, clean and free from oil and grease.
,_ WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/ or serious personal injury, • Before using battery charger,.
Some of the following symbols may be used on this tool. Please study them andlearn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.
SPECIFICATIONS Chuck Capacity Motor Charger Rating No Load Speed 3/8 in. 14.4 Volts DC 120 Volts, 60 HZ, AC Only 0 - 600/min. Switch Charge Rate Maximum Torque Variable Speed - Reversible 3 - 6 Hours 100 in.
PACKINGLIST 3/8 in. (10 mm) Right Angle Drill Charger Battery Pack (2) Screwdriver Bits (2) Operator's Manual Case WARNING: If any parts are missing do not operate the tool until the missing parts are re- placed. Failure to do so could result in possible serious personal injury.
SWITCH LOCK See Figure 2. The switch trigger can be locked in the OFF position. This feature can be used to prevent thepossibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector in center position.
KEYLESS CHUCK See Figure 5. Your drill has a keyless chuck. Asthe name implies, you can hand tighten or release drill bits inthe chuck jaws. Grasp and hold the collar of the chuck withone hand.
REMOVING BITS See Figure 7. [] Lock switch trigger or your drill by placing the direction of rotation selector in center position. See Figure 2. [] Loosen the chuck jaws from drillbit. [] To loosen: grasp andhold the collar of the chuck with one hand, while rotating chuck body with your other hand.
DRILLING See Figure 11. CHUCK REMOVAL See Figures 12, 13, and 14. The chuck must be removed in order to use some accessories. To remove: [] Lock switch trigger or your drill by placing the direction of rotation selector in center position. See Figure 2.
CHUCK REMOVAL (Continued) [] Insert hex key wrench in chuck and tighten chuck jaws securely. Tap sharply with a mallet in a counterclockwise direction. This will loosen chuck on the spindle. It can now be unscrewed by hand. See Figure 14. TO RETIGHTEN A LOOSE CHUCK The chuck may become loose on spindle and develop a wobble.
_ ARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Do not abuse power tools.
The following recommended accessories are currently available at Sears Retail Stores. [] 6-Pc. Extra Length Magnite Power Bit Set [] 30-Pc. Power Screwdriver/Nutdriver Setand Case [] 17-Pc. Power Screwdriver/Nutdriver Setand Case _ WARNING: The use of attachments oraccessories not listed might be hazardous.
CRAFTSMAN 3/8 in., 14.4 VOLT CORDLESS DRILL-DRIVER- MODEL NO. 973.114240 The model numberwill be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your 3/8 in., CORDLESS DRILL-DRIVER orwhen ordering repair parts.
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Craftsman 973.11424 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Craftsman 973.11424 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Craftsman 973.11424, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Craftsman 973.11424 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Craftsman 973.11424, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Craftsman 973.11424.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Craftsman 973.11424. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Craftsman 973.11424 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
