Manuel d'utilisation / d'entretien du produit 315.27127 du fabricant Craftsman
Aller à la page of 20
Owner's Manual iPR 0 FES S I 0 HAL i 112 in. PROFESSIONAL CORDLESS HAMMER DRILL Variable Speed / Reversible Model No. 315.271270 Save this manual for future reference _, CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.
TABLE OF CONTENTS • General Safety Rules ................................................................................................................................................. 2-3 • Specific Safety Rules/Symbols ........................
Tool Use and Care • • Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. • Do not force tool. Use the correct tool for your application.
Important Safety Instructions For Charger • Save these instructions. This manual contains important safety and operating instructions for battery charger part number 9-11040, Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
SYMBOLS SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) min Minutes Time Alternating Current Type or a charact'eristic of current --=- Direct Current Type or a characteristic of current no No Load Speed Rotational speed, at no load .
KNOW YOUR HAMMER DRILL See Figure 1. Before attempting to use your hammer drill, familiarize yourself with all operating features and safety requirements. ,_ WARNING: Carefully read through this entire owner's manual before using your new hammer drill.
AUXILIARY HANDLE WiNG SCREW TWO SPEED GEAR TRAIN (HI-LO) LEVEL DEPTH GAGE ROD BIT STORAGE AREA KEYLESS CHUCK MODE SELECTOR • TORQUE TRIGGER ADJUSTMENT RING DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE) BATTERY PACK WRIST STRAP Fig.
LED FUNCTION OF CHARGER YELLOW LIGHT "ON" AND RED LIGHTFLASHING INDICATES DEFECTIVE BATTERY PACK CHARGER FAST CHARGING MODE GREEN LIGHT "ON" INDICATES FULLY CHARGED AND SLOWCHARGI.
AUXILIARY HANDLE See Figure 4. An auxiliary handle is packed with your drill for ease of operation and to help prevent loss of control. The handle can be rotated 360 ° and it can also be mounted on opposite side for left hand use.
INSTALLING BITS See Figure 7. • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 13. • Open or close chuck jaws to a point where the open- ing is slightly larger than the bit size you intend to use.
_, WARNING: Always wearsafety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. CHARGING BATTERY PACK The battery pack for this tool hasbeen shipped in a low charge condition to prevent possible problems.
SWITCH See Figure 11. To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. FORWAR_REVERSE SELECTOR CENTER POSITION (LOCK) TRIGGER Fig, 11 VARIABLE SPEED This .
KEYLESS CHUCK See Figure 14. A keyless chuck has been provided with your drill to allow for easy installation and removal of bits. As the name implies, you can hand tighten or release drill bits in the chuck jaws. Arrows on the chuck indicate which direction to rotate the chuck sleeve in order to LOCK (tighten) or UNLOCK (release) the chuck jaws.
APPLICATIONS (Use only for the purposes listed below) • Hammer drilling in concrete and masonry. • Drilling in wood. • Drilling in ceramics, plastics, fiberglass, and lami- nates. • Drilling in both hard and soft metals. • Using driving accessories, such as driving screws with screwdriver bits.
TO ADJUST DRILLING OR HAMMER MODE See Figure 19. • To adjust drill to drilling or hammer operation, rotate mode selector in the direction of arrows as shown in Figure 19. • For your convenience a hammer symbol and drill bit symbol have been molded into the selector.
CHUCK REMOVAL See Figures 20, 21, and22. The chuck must be removed in order to use some accessories. To remove: • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 13. • Insert a 5/16 inch or larger hex key wrench into the chuck of yo_Jr drill and tighten the chuck jaws securely.
,_ WARNING: When servicing use only identical Craftsman replacement parts. Use of any other parts may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
The following recommended accessories arecurrently available at Sears Retail Stores. • 6-Pc. Extra Length Magnite Power Bit Set • 30-Pc. Power Screwdriver/Nutdriver Set andCase • 17-Pc. Power Screwdriver/Nutdriver SetandCase • High Speed Bits .
t CRAFTSMAN 1/2 in. PROFESSIONAL CORDLESS HAMMER DRILL MODEL NO, 315.271270 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your CRAFTSMAN 1/2 in. PROFESSIONAL CORDLESS HAMMER DRILL or when ordering repair parts.
In U.S.A. or Canada for in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME s_ (1-800-469-4663) Para pedir servicio de reparacibn a domicilio - 1-800-676-5811 Au Canada pour tout le service ou les pieces - 1-800-469 4663 For the repair or replacement parts you need: Call 6 a.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Craftsman 315.27127 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Craftsman 315.27127 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Craftsman 315.27127, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Craftsman 315.27127 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Craftsman 315.27127, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Craftsman 315.27127.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Craftsman 315.27127. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Craftsman 315.27127 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
