Manuel d'utilisation / d'entretien du produit 1 4-Line Multi-User du fabricant Cortelco
Aller à la page of 30
1 4-Line Multi-User Capable T elephone System John Smith 972-555-2233.
2 T able of Contents Introduction Button Descriptions and Functions ........................................................ 4 Installation What’s Included With Y our 4-Line S peakerphone ................................... 6 Site Planning .........
3 Hold Holding a Call ................................................................................... 1 8 Retrieving a Held Call ...................................................................... 18 Hold Reminder Enable / Disable .............
4 Introduction Button Descriptions and Functions 31 32 33 34 35 12 3 4 56 7 8 9 10 11 12 13 14 15 30 29 28 27 26 25 23 22 20 19 18 17 16 21 24.
5 1. Caller ID Scroll - Displays and scrolls through the most recent to the oldest Caller ID. Also, allows the user to scroll left in the program menu after the program button is pressed. 2. LCD Display - The LCD Display shows the calendar when the telephone is idle.
6 Installation What’ s Included With Y our 4-Line Speakerphone (1) Base T elephone (1) Handset (1) Handset Coil Cord (1) 12VDC, 400mA AC Adapter (2) 2 Pair (4 Conductor) Line Cords (1) 2 Pair (4 Conductor) Short Cord for W all Mounting ( 1 ) User Guide Site Planning This telephone can be connected to 4 separate telephone lines.
7 1. Open the battery cover on the back of the telephone by removing the safety screw and pressing the tab in. 2. Insert the batteries as indicated inside the battery compartment. 3. Reinstall the battery cover and replace the safety screw . NOTE: When the display reads BATT , replace the batteries.
8 Wall Mounting When wall mounting your telephone, be aware of the following: • The location where the telephone will be mounted should be away from electrical cables, pipes, or other items which may be punctured when screws are inserted into the wall • The wall surface should be capable of supporting the telephone weight.
9 Handset Jack Lines 3 & 4 Handset Catch Press to release W all Mount Adapter T elephone Cord Channel Replace W all Mount Adapter Move Viewing Angle Brackets on the left and right side of the telephone as shown.
10 Using Y our T elephone Line Use Indications Each Line Button has an indicator to show you the status of the telephone line, as shown below: No Light Line is available, if connected Blinks once ever.
11 Placing a Telephone Call 1. Press the button. NOTE: The first available line will automatically be selected. Y ou may press a line button to dial out from a specific line. Pressing the line button while the telephone is idle will activate the speakerphone.
12 Features and Operation Caller ID Y our 4-Line telephone is equipped with Caller ID for all four outside lines. T o use the Caller ID feature, you must subscribe to Caller ID service for each line through your local telephone service provider . Y ou may review , redial, or store in speed dial any of the numbers stored in Caller ID.
13 Receiving Caller ID on an Idle Telephone 1. When a call is received on an idle telephone, the display will show the name, telephone number , and line that the call is received on. 2 a. If you answer the call, the Caller ID data will remain on your display for the duration of the call.
14 3. T o view the date and time, press #, or wait approximately 10 seconds. 4. The display will return to idle after 20 seconds. Pressing any button other than and will also terminate Caller ID viewing. Dial a Telephone Number from the Caller ID Database 1.
15 Erasing All Caller ID Information from the Caller ID Database NOTE: Caller ID information is stored at each phone independently . 1. Press either the or button to display the call summary screen. 2. Press . Y ou will be asked to confirm the deletion.
16 Date and Time Date Programming 1. Press the PROGRAM key . 2. Press the up or down arrow key to scroll to the “Date” item. 3. Press the right arrow key to choose this item. 4. Press the up or down arrow key to select the month. 5. Press the right arrow key to confirm your selection.
17 Extension Numbers When using multiple phones, each phone must be set as a unique extension number . The phones are factory set as Extension 1 1, and can be programmed from 1 1 to 22. 1. Press the PROGRAM key . 2. Press the up or down arrow key to scroll to the “Extension NO” item.
18 Operation • Use the button to pick up and hang up. This is true for headset and handset operation when in headset mode. • Pressing S peed Dial buttons or Line buttons will cause the telephone to go off hook. Use the button to hang up. NOTE: It is important to remember that the hook switch is inoperative when in headset mode.
19 Placing an Intercom Call 1. a. If using the handset, pick up the handset and press . b. If using speakerphone or a headset, press . 2. Dial the extension number you wish to call, or press a S t ation Select button. 3. After the conversation has finished, hang up or press the button to disconnect.
20 Line S tatus Indication Each line has a light to show its status: No Light Line is available, if connected Blinks once every 2 seconds Line is in use by this phone Quickly blinks on and off repeate.
21 Paging an Individual Extension 1. a. If using the handset, pick up the handset and press . b. If using speakerphone or a headset, press 2. Dial the extension number you wish to page. 3. S peak your message. After you have finished, hang up or press the button to disconnect.
22 Prime Line Programming This feature allows you to program which line will be selected first when you lift the handset or press the speaker key . 1. Press the PROGRAM key . 2. Press the up or down arrow key to scroll to the “Prime Line” item. 3.
23 3. Press a line button to dial out on. 4. Press . The system will redial the last number dialed, and wait 30 seconds. NOTE: If the called party answers, you may pick up the handset, or press the button to stop the auto redial.
24 13 . Area Code: Empty for H.A.C. and all L.A.C. 14 . S peed Dial: Empty for all locations 15 . Ring V olume: Middle 16 . S peaker V olume: Level 4 17 . Handset V olume: Minimum 18 . Headset V olume: Minimum Ringer Enable / Disable Y ou may enable or disable any individual line or lines on the 4-line telephone.
25 Press * any time during your call to change to tone dialing mode. The telephone is returned to pulse mode when you disconnect. T one/Pulse Mode Depending on the phone service available in your area, you may need to adjust the dialing mode. NOTE: All 4 lines will be set to the same dialing mode.
26 IMPOR T ANT SAFETY INSTRUCTIONS Always follow basic safety precautions when using your telephone equipment to reduce the risk of fire, electrical shock, and injury. 1. Read and understand all instructions in the Owner’s Instruction Manual. 2. Read all warnings and follow all instructions marked on the product.
27 Repair Of Y our T elephone DO NOT A TTEMPT TO REP AIR THIS PRODUCT YOURSELF . 4-Line T elephones manufactured by CORTELCO must be returned to us for repair . Y ou can return your telephone to CORTELCO for repair or replacement in accordance with our LIMITED W ARRANTY .
28 The FCC W ants Y ou T o Know This telephone is registered with the Federal Communications Commission and it complies with Part 15J and Part 68 of the FCC Rules and Regulations.
29 PLACE THIS TEMPLA TE ON THE W ALL. THE LOCA TION OF THE SCREWS IS INDICA TED BY THE CENTERS OF THE CROSSED LINES. F ASTEN THE SCREWS WITH ANCHORS, LEA VING 3/16” OF THE SCREW EXTENDING FROM THE W ALL.
30 If this product was purchased by you new in the U.S. or Puerto Rico, CORTELCO warrants it against defects in material and workmanship for a period of one (1) year from the date of original purchase. This warranty is in lieu of all other express warranties.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Cortelco 1 4-Line Multi-User c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Cortelco 1 4-Line Multi-User - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Cortelco 1 4-Line Multi-User, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Cortelco 1 4-Line Multi-User va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Cortelco 1 4-Line Multi-User, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Cortelco 1 4-Line Multi-User.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Cortelco 1 4-Line Multi-User. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Cortelco 1 4-Line Multi-User ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
