Manuel d'utilisation / d'entretien du produit LCD2084 du fabricant Clover Electronics
Aller à la page of 176
1 INSTRUCTION MA NUAL 20.1” Wide LCD Screen All in One System Built-in 8Ch DVR MODEL: LCD2084, LCD2088 V e r . 051309, 061009 , 102609 Copyright © 2009 Clover Electronics U.
2.
Conte nts 3 CONTENTS AB OU T TH IS MA NU A L .. .................. .................. ........ ...... .................. ............... .................. ...... ... ....... 9 1. UN PA C KI NG............ .................. .................. ... ...
Stand-a lone DVR I nstructio n M anual 4 6-6.1. FULL SCREEN....... ............ ........... .......... ............ ......... ............ ......... ............ ......... ...... . ............ ..... 37 6-6.2. SPLIT SCRE ENS ..... .......... .........
Conte nts 5 6-1 1. COPY .................... ........................... ....................... ............................ ............................ 68 6-1 1.1. Co pying devices ..... ............ ............ ......... ............ ......... ..
Stand-a lone DVR I nstructio n M anual 6 7-6. RECORD................. ........................... ............................ ....................... .......................... 101 7-6.1. Record I CON Display ...... ............ ......... ...........
Conte nts 7 8-4.2. Connection ........ ............ ......... ............ ............ ......... ............ ......... ............ ......... ...... .. ........... ........ 142 8-4.3. Capture ............ ......... ............ ......... ...........
Stand-a lone DVR I nstructio n M anual 8.
9 About this manual This is the In struction Manu al for 20.1” Wi de TFT -LCD monitor bu ilt-in 8Ch DVR system, Model LCD2084 and LCD2088. The last digit of the model numbers (e.g.: 4 and 8) represent the number of cameras included in the system. This Manual describes how to install and operate the 20 .
Stand-a lone DVR I nstructio n M anual 10.
11 1. Unpacking Care should be taken when unp acking to avoid damaging the system. Please check that the following items are in cluded: Note : Contact your dealer immediately if any components are missing.
Stand-a lone DVR I nstructio n M anual 12 1-1. 20 .1” Wide LC D Panel B uilt-in 8 Ch Digi tal Video R ecorde r LCD2084 is the most reliable and functional embedded DVR system av ailable today .
13 2. Features ▶ 20.1” Wide Screen - High resolution TFT -LCD 1,680(H) x 1,050(V), Contrast ratio 1 ,000:1, Response 3.9msec ▶ Multi Functional Record - Powerful, multiple Record Modes available: Manual (Continuous), T imer , and Motion Detection Recording.
Stand-a lone DVR I nstructio n M anual 14.
15 3. What to do at the time of Installation The system should be inst alled in the following order; 1. Make sure a ll the required hardware is available. - 20.1” wide TFT -LCD monitor built-in 8 Ch DVR - Up to 8 cameras capa city (Refer to the retail box for the number of camera included in the system).
Stand-a lone DVR I nstructio n M anual 16.
17 4. Specifications I T E M DESCRIPTIONS T elevision System NTSC P AL Refresh Rate 60 fields/sec 50 fields/sec Video Resolution 720x480 720x576 Video Inputs 8- 6pin Din Cameras and 8- BNC Cameras Video Input Signal Composite 1.0 Vp-p 75 Ohms Video Output 1- Composite output VIDEO SIGNAL Video O utput Signal Composite 1.
Stand-a lone DVR I nstructio n M anual 18 Display 20.1” TFT LCD active ma trix Pixel Pitch 0.258 mm x 0.258mm Active Display Area 433.44(H) x 270.90(V) mm Display Colors 16.
19 5. Installation CONTENTS 5-1. CONTR OLS AND CONNECT ORS ............... ........................... ........................... ...... 20 5-2. NOTE FOR INST ALLA TION ........... ........................... ............................ ............
Stand-a lone DVR I nstructio n M anual 20 5-1. Controls and Connectors z Front [Fig. 5-1 Front/Top View] POWER S/W & LED 8 9 REMOTE CONTROL SIGNAL RECEIVER A 1 2 3 4 5 6 7 A.
5. Installation 21 1. REC Key - Press this key to start recor ding. - In order to stop recording, press this key again or click the REC button on the MENU w indow and then the following message will be appeared. Click the OK button or press the ENTER key.
Stand-a lone DVR I nstructio n M anual 22 z Rear [Fig. 5-2 Rear & Side View] CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 ETHERNET VIDEO OUT AUDIO OUT 1 2 3 4 5 6 7 G8 NC + - NO USB 2 USB 1 AC INPUT CAMERA IN .
5. Installation 23 5-2. Note for Install ation Install the system according to the instructions described in this manual. The 20.1” LCD monitor built-in 8Ch DVR and Indoor Cameras are designed for indoor use and should not be used ou tdoors.
Stand-a lone DVR I nstructio n M anual 24 5-3. System Connection [Fig. 5- 3 System Connecti on].
5. Installation 25 5-4. Installation 5-4.1. Camera Connection ▫ Connection of 6pin MINI DIN Cameras Connect the supplied cameras to the Camera Input (6p in mini DIN jack) on the left side of the system as shown in [Fig.
Stand-a lone DVR I nstructio n M anual 26 5-4.2.1. Connection of Composite Monitor If ne cess ary , c onnec t the com posi te Video O utput (yell ow RCA ) and Audio O utput (whit e RCA) to Video IN and A udio IN on a composite mo nitor or TV (RCA cable: not included).
5. Installation 27 5-4.4. RS485 Connection ▫ Connect the cable to the “RS485 PORT” on the termina l block of the system. [Fig. 5- 8 RS485 Co nn ection] 5-4.5. Connection to an Ethernet Network (Optional) ▫ Connecting the cable to Ethernet. Our Ethernet connector is a RJ45 type.
Stand-a lone DVR I nstructio n M anual 28 5-4.6. POWER CABLE CONNECTION Connect the provided AC p ower cable to the monitor an d an AC outlet. AC in put voltage is AC 1 1 0V to 220V 50/60Hz. It should not be share d with other electrical equipment on the same lin e.
29 6. How to operate CONTENTS 6-1. GENERAL INFORM A TION ............... ....................... ........................... ....................... 31 6-2. OPERA TING INTERF ACE ..................... ........................... ......................
Stand-a lone DVR I nstructio n M anual 30 CONTENTS 6-7.4. LIVE AUDIO ......... ......... ............ ......... ............ ......... ............ ......... .......... ............ ......... .......... ... 41 6-7.4.1. COMMUNICA TION BETWEEN MONITOR AND CLI ENT COMPUTER VIA INTERNET .
6. How to Operate 31 6-1. General Information ▫ Y ou can operate all functions of the system by use of the buttons located on the top panel, remote controller and a mouse. Additionally , you can remotely control this unit vi a RS485 or the Ethernet port located on the side of the unit.
Stand-a lone DVR I nstructio n M anual 32 6-2. Operating Interface There are 3 ways to operate the system by pressing the buttons on the top p anel or buttons on the remote controller and clicking th e mouse. A lot of users mostly pr efer to use a mouse on these kinds of products such a s DVRs, computers and computer-aided devices.
6. How to Operate 33 6-3. IR Remote Controlle r [Fig. 6-1 IR Remote Controller] 1. PO WER / STANDBY 2. REC 3. STA TUS 4. ZOOM 5. FREEZE 6. No.1~8 Channel (Full Screen) o r I R I D N u m b e r 7. Disp lay format (Split) 8. IR I D Set 9. MENU 10. E SC 11.
Stand-a lone DVR I nstructio n M anual 34 6-4. Power On/Off 6-4.1. POWER ON On the rea r p ane l: T urn on the POWE R sw itch on the rear pane l (See Fig.5-2 ). The LED on t he fron t panel is lit when the POWER sw itch is ON . By S t and-by Power Mode Button Press this button on the front panel (See Fig.
6. How to Operate 35 ▫ Press the ENTER ( ↵ ) button to tu rn the power OFF . By clicking the mouse : ▫ Right-click on the screen in the live mode to display the MENU window. ▫ Click the POWER OFF button on the MENU window (See [Fig. 6-3] ) and then the message (See [Fig.
Stand-a lone DVR I nstructio n M anual 36 6-5. Menu Window Right-click on the screen in the LIVE or the RECORD mode and th en the MENU window will be appeared as shown in [Fig.
6. How to Operate 37 6-6. Di spl ay S cre en 6-6.1. FULL SCREEN [Fig. 6-5 FULL screen] RECO R D ICON CURRENT TIME AUDIO ICON COPY ICO N SE Q UENCE ICON CAMERA TI T L E LIVE AUDIO.
Stand-a lone DVR I nstructio n M anual 38 6-6.2. SPLIT SCREENS FULL SCREEN QUAD SCREEN 4page SEQUENCING SCREEN SEQUENCING SCREEN.
6. How to Operate 39 6-7. LIVE 6-7.1. FULL SCREEN ▫ A Full SC REEN is avail able in t he LIV E mode o r the RE CORD m ode. ▫ Click on a certain camera’s screen in the LIVE mode or in the RECORD mode, then a FULL SCREEN will be disp layed. ▫ Click the FULL screen to re turn to the SPLIT SCREEN.
Stand-a lone DVR I nstructio n M anual 40 6-7.3. SEQUENCING SCREENS ▫ Displaying the cameras in SEQUENCE is available in the LIVE mode or the RECORD mod e. Each of the channels will be d isplayed in sequence and the dwell time can be adjusted in the camera set up menu (Refer to 7-4.
6. How to Operate 41 6-7.4. LIVE AUDIO ▫ Setup LIVE AUDIO when the s ystem is not connected through the DvrMaster or Internet Expl orer an d the OS D is turn ed ON. ▫ I f came ras (up to 8cameras) ha ve audio function, it will sou nd in the live mode.
Stand-a lone DVR I nstructio n M anual 42 6-7.4.1. COMMUNICATION BETWEEN MONITOR AND CLIENT COMPUTER VIA INTERNE T ▫ This system is normally in listening mode between the LCD monitor and your computer through the Internet (DvrMaster or Internet Explorer).
6. How to Operate 43 6-7.5. ZOOM The image on the scre en will be zoo med up to 2 times w hen the ZOOM button is clicked in the LIVE mode (This function is avai lable on the full screen mode only). ▫ Right-click on the screen in the LIVE or th e RECORD mode and the MENU w indow will be appea red as shown in [Fig.
Stand-a lone DVR I nstructio n M anual 44 6-7.6. OSD ON / OFF OSD ON /OFF is possible in the LIVE mode or RECORD mode. ▫ Click th e OSD button on the MENU window to turn the OSD (On Scr een Display) ON or OFF. When the OSD is in OFF position, all the texts on the screen will be disappeared.
6. How to Operate 45 6-7.7. PAN / TILT ▫ Click the PAN/TIL T button on the MENU w indow in the LIVE mode to access the PAN/TILT came ras. ▫ Click the (EXIT) button to return to th e MENU window .
Stand-a lone DVR I nstructio n M anual 46 [Fig. 6-16 PAN/TILT CONTROL] ▫ Channel Selection and Sc reen Conversion To change a channel, press the CHANNEL button on the remote controller or click the CHANNEL butto n on the [Fig. 6-16]. It will be con verted a full screen.
6. How to Operate 47 ▫ PRESET [Fig. 6-17 Preset Menu] It is a function to preset the PTZ camera(s) which you wish to monitor frequently. Pres et Se tu p - S elect a p ositi on of c amera you wis h to pres et an d click the SE T button in [Fig. 6-17] .
Stand-a lone DVR I nstructio n M anual 48 6-7.8. SYSTEM STATUS ▫ Click the SY STEM STATUS button on the MENU w indow to see the system status as shown below ( [Fig. 6-18] ). ▫ Click th e (EXIT) button to return to the MENU window . [Fig. 6-18 SYSTE M STATUS but ton ] [Fig.
6. How to Operate 49 6-7.9. POWER LOSS LISTS The list indicates the time/date w hen the system power wa s turned OFF. ▫ Click the POWER LOSS LISTS button on the SYSTEM STATUS window to view the POWER LOSS LISTS. ▫ E ach of the pages contains 10 lists.
Stand-a lone DVR I nstructio n M anual 50 ▫ CLEAR LISTS button Click the CLEAR LISTS button to clear the lists, you will be prompted to confirm changes. When you click the OK button, the POW ER LOSS LISTS will b e deleted. T o cancel, click the CANCEL button [Fig.
6. How to Operate 51 6-7.10. VIDEO LOSS LIST The list indi cates the video loss ch annel a nd th e time/da te when the vid eo sig nal wa s disconnected. ▫ Click the VI DEO LOSS LISTS bu tton on the SY STEM STATUS wi ndow to view the VIDEO LOSS LISTS.
Stand-a lone DVR I nstructio n M anual 52 ▫ CLEAR LISTS button Click the CLEAR LISTS button to clear the lists, you will be prompted to confirm changes. When y ou cli ck the OK butt on, t he VIDE O LOSS LISTS will be de lete d. T o cancel, click the CANCEL button [Fig.
6. How to Operate 53 6-8. VIDEO EN HANCE ▫ Click the DISP LA Y button in the MENU window to enhance the picture quality on each of channels (Contrast and Brightness) and VGA outp ut (Contrast, Brightness and Saturation). The VIDEO ENHANCE menu will show up (See [Fig.
Stand-a lone DVR I nstructio n M anual 54 6-8.1. CAMERA INPUT CONFIG (CONTRAST / BRI GHTNESS) ▫ Click a CAMERA INP UT b utton in the VI DEO ENHANCE menu. ▫ The CONTRAST and BRIGHTNESS sliders w ill be displayed along with camera picture as shown in [Fig.
6. How to Operate 55 6-8.2. VGA OUTPUT CONFIG (SCALE / CO NTRAST / BRIGHTNESS / SATURATION) ▫ To Setup the SCALE / CONTRAST / BRIGHTNESS / SATURATION of VG A Output, click the VGA OUTPUT in the VIDEO ENH ANCE menu and then the VGA ENHANCE menu will display a s show n in [Fig.
Stand-a lone DVR I nstructio n M anual 56 6-9. Re cord This system provides W atchdog function . When power goes off during recording and the power turns on, the system w ill automatically start recording. 6-9.1. Manual (Continuous) recording ▫ Click the SETUP icon on the MENU window in the LIVE mode.
6. How to Operate 57 The MOTION ( ) o r SENSOR ( ) as show n in [ F i g . 6-30 ] shoul d be t urned ON in this recording mode. ▫ Press the RECORD button on the side pane l or click the RECORD icon on the MENU win dow . [Fig. 6-30 Manual Event Recording setup ] 6-9.
Stand-a lone DVR I nstructio n M anual 58 6-9.4. Timer Event Recording ▫ Click the SETUP icon on the MENU window in the LIVE mode. ▫ Click the RECORD bu tton in the SETUP menu and the RECORD window will be displayed. ▫ Select the TIMER RECORDING ( ) between the MANUAL RECORDING ( ) and the TIMER RECORDING ( ) as shown in [Fig.
6. How to Operate 59 [Fig. 6-34 Hour/M inute Selection Table ] 6-9.5. Audio Recording ▫ Click the Audio Re cording button, or i n the RE CORD menu as sho wn in Fi g.6- 35. If the “ O ” is selected, the corresponding channel’s audio will record along with video signals.
Stand-a lone DVR I nstructio n M anual 60 6-9.7. Recording Icons The Recording Icons depends on recording modes are displayed in the upper left hand corner of the screen. ▫ To turn the Recordin g Icon OFF, clic k the DISPLAY ON in the RECORD menu and then it will be turned OFF.
6. How to Operate 61 6-10. REPLAY 6-10.1. QUICK REPLAY It is available only by pressing the QICK SEARCH button on the remote controller. ▫ Press the PLAY b utton, then the recent re corded list will be p layed. 6-10.2. REPLAY ▫ Click the REPLAY icon on the MENU window , then the REPLAY window as shown in [Fig.
Stand-a lone DVR I nstructio n M anual 62 6-10.2.1. Playback Devices In order to payback, plug the USB devices such as external USB HDD, USB memory to the USB port or insert a recorded media (CD-R/W or DVD-R/W) into the DVD-R/W drive. When the devices are ready to playback, the Ready on the corresponding devices w ill be displayed as shown in [Fig.
6. How to Operate 63 ▫ Select the hour on the S tart T ime Select Window (See [Fig. 6-41] ) by c licki ng the mous e on the Hour (0 – 23 hour) you wish to st art to play . The green active buttons indicate the HOUR that contains recorded data, and the red active buttons indica te the selected S tart HOUR.
Stand-a lone DVR I nstructio n M anual 64 6-10.2.3. Replaying Replaying st art time set-up ca n be possible within a recording time e xtent. ▫ Replay buttons (NORMAL / MOTION / SENSOR) NORMAL PLAY: Click the button to play all the recorded data. MOTION PLAY: Click the button to play the reco rded data by MOTION only.
6. How to Operate 65 ▫ How to control the buttons while replaying [Fig. 6-44 Replay screen ] ① Sear ch Slider It is possible to playback by clicking the slider on the bar and dragging it. ② PLA Y / P AUSE Click the butt on to pause. Click the but ton to replay when in t he paus e mode .
Stand-a lone DVR I nstructio n M anual 66 ⑤ S pe aker ON / OFF Turn speaker ON or OFF . ⑥ Sp e a k e r Vol um e Adjust the Audio Volume by clicking the ▲ or the ▼ button when the AUDIO is t urned ON. 6-10.2.4. Disappearance of Replay control buttons During replaying, the replay control buttons appear on the bottom of the screen.
6. How to Operate 67 - Click the mouse on one out of chann els during replaying to view a full screen. - Click the mouse on the full screen during replaying to return to the split screen.
Stand-a lone DVR I nstructio n M anual 68 6-11. COPY ▫ Click the COPY icon on the MENU w indow, and then the COPY window as shown in [Fig. 6-47 ] w ill be displaye d. ▫ Click th e (EXIT) button to return to the p revious mode. [Fig. 6-47 COPY window ] 6-11.
6. How to Operate 69 ▫ Connect the USB devices to the DVR ▫ Click the SET UP icon on the MENU w indow, and the SETU P menu will be displayed. ▫ Click the DISK MANAGER in the SETUP menu, an d the DISK MENAGER will be displayed. ▫ Click the mo use on the USB button in th e DISK MANAGER, and you will be asked.
Stand-a lone DVR I nstructio n M anual 70 [Fig. 6- 49 Copy St ar t time and Channel Se lection w indow ] ① All channe ls, HOUR selectio n button. Click the arrow button in the upper lef t corner as shown in [Fig. 6-49 ] to set the full extent of the recording and all the channels simultaneously .
6. How to Operate 71 [Fig. 6-50 Copy Start/End setup butto ns ] By using the S t art/End set-up ba r: The starting time to cop y can also be set by clicking the slid er on the bar and dragging it or just cli ck the bar . [Fig. 6- 51 Copy St ar t/End se tup bar ] 6-11.
Stand-a lone DVR I nstructio n M anual 72 6-11.4. Copying the recorded data during re playing The s ystem , LCD208 4 allo ws user s to cop y the re corde d data during repla ying. ▫ Start replaying (See section 6-10). ▫ Right-click on the replaying screen, then the COPY DATA screen will be displayed (See [Fig.
6. How to Operate 73 [Fig. 6-53 End Copy Time Setup window ] ▫ Choose one among NETWORK, USB, CD and DVD which are ready to copy (See section 6-11.1). Sele ct COPY Mode On ly when the device and media are ready to copy , the Ready on the corresponding device and media will be displayed.
Stand-a lone DVR I nstructio n M anual 74 ▫ As soon as one of the above button s is clic ked, copying w ill start along with displaying the icon show n in [Fig. 6-54 ] . The following icon indicates that copying is in process. [Fig. 6-54 Copying Icon ] 6-11.
75 7. SETUP CONTENTS 7-1. SETUP ................ ........................... ....................... ........................... ............................ 7 8 7-2. SYSTEM ....................... ........................... .........................
Stand-a lone DVR I nstructio n M anual 76 CONTENTS 7-4. CAMERA ................. ........................... ....................... ........................... ........................ 92 7-4. 1. C AMERA ON /OFF ........... ..........................
7. Setu p 77 CONTENTS 7-7. NETWOR K .................................... ........................... ............................ ................. 1 19 7-7. 1. IP M ODE ................................. ........................... ...................
Stand-a lone DVR I nstructio n M anual 78 7-1. SETU P [Fig. 7-1 Setup Icon on MENU window ] It is possible to set up the menus in the LIVE mode and partly in the RECORD mode. ▫ Click the “SETU P” button on the MENU window, then the SETUP menu will be displayed.
7. Setu p 79 7-2. SYSTEM ▫ Click the “SY STEM” button in the SETUP menu , and then the SYST EM menu show n in Fig.7-3 will be d isplayed. ▫ Click th e “EXIT” button to return to the SETUP menu .
Stand-a lone DVR I nstructio n M anual 80 7-2.1. SYSTEM NAME The SYSTEM NAME is one of the important factors to access the DVR through MNS (MAC NAME SERVER) with the DvrMast er (GUI). You can’t access the DVR system if the SYSTEM NAME you entered already exists on the network.
7. Setu p 81 7-2.2. LANGUAGE ▫ Click the “LANGUAGE” button in the SYST EM men u, then the LANGUAGE submenu will display. ▫ S elect English or Spanish by clicking the mouse. ▫ Click th e “EXIT” button to return to the SYSTEM menu. [Fig. 7-6 LANG UAGE button ] 7-2.
Stand-a lone DVR I nstructio n M anual 82 [Fig. 7-9 Time S etting ] ▫ DATE FORMAT There are three fo rmats to display the time and date a s follows. • MM / DD / YYYY: For U.S.A. • YYYY / MM / DD: For Asia n countries. • DD / MM / YYYY: For European countries.
7. Setu p 83 7-2.4. SYSTEM CONFIG ▫ Click the “SYS TEM CONFIG” button in the SYSTEM menu, and then the SYSTEM CONFIG menu will be displayed (See [Fig.
Stand-a lone DVR I nstructio n M anual 84 7-2.4.1. FACTORY DEFAULT ▫ Click the “ FACTORY DEFAULT ” button in the SYSTEM CONFIG menu, and you will be asked a s show n in [Fig. 7-15 ] . [Fig. 7-14 Facto ry Default button ] ▫ Click the “OK” button in [Fig.
7. Setu p 85 7-2.4.2. LOAD CONFIG / BACKUP CO NFI G You can save up to four different settings in the BACKUP CONFIG and load the files in the LOAD CONFIG to ch ange the settin gs to the sy stem. ▫ LOAD CONFI G This function is to lo ad the changed settings to the syste m.
Stand-a lone DVR I nstructio n M anual 86 ▫ BACKU P CONFI G This function is to save the c urrent settings to load the se ttings to th e system. Sa ve the current settings in the BACKUP CONFI G in order to load it to the system in the near future whenever you change the settings.
7. Setu p 87 7-2.5. PASSWORD ▫ ON/OFF Select ON or OFF b y clicking th e mouse. If the ON is se lected, the password has to be en tered to get into the SETUP mode, RECORD mode, COPY mode, REPLAY mode, and when trying to connect the network through the DVR Maste r .
Stand-a lone DVR I nstructio n M anual 88 7-2.6. IR REMOTE ID Up to 16 DVR systems can be controlled by only one remote controller we provided, but IDs should be assigned on each of the syste ms.
7. Setu p 89 7-2.7. FIRMWARE UPDATE There are two ways to update the firmware through USB memory and the DvrMaster (GUI). We recommend users to update the firmw are only in the LIVE mode. ▫ By USB memory - Format the USB with your computer and save the firmw are file on it (not including folder).
Stand-a lone DVR I nstructio n M anual 90 7-3. DISK MANAGER ▫ Click th e “ ” button in the SETUP me nu and th en the DISK MANAGER window w ill be displ ayed (See [Fig.
7. Setu p 91 7-3.1. HDD WRITE FAIL If HDD is in full and the OVERWRITE on the HDD is turned OFF in the re cording mode, the system will activate the relay output (See section 5-4.3) for a siren or other device. ▫ Click the HDD WRITE FAIL button in the DISK MANAGER w indow and select RELAY 1 OUT or DISABLE.
Stand-a lone DVR I nstructio n M anual 92 7-4. CA ME RA ▫ Click the “CAM ERA” butto n in the SETUP menu a nd then the CAMERA men u will be displayed (See [Fig. 7-29 ] ). To change the settings in the CAMERA menu, stop recording by clicking the RECORD icon on the MENU window.
7. Setu p 93 7-4.1. Camera ON/OFF ▫ Click on each of the channels to select the “ O ” or “ X ” in the CAMERA me nu. If the “ O ” is selected, the co rresponding video channels (CAM 0 1 through CAM 08) will be displayed on the screen.
Stand-a lone DVR I nstructio n M anual 94 7-4.3. Buzzer In order to a lert users, the Buzzer w ill sound at tha t time video signal lost. ▫ Click on each of the channels you wish to turn the bu zzer “ON” or “OFF”.
7. Setu p 95 7-4.5. Pan/Tilt Settings ▫ Click the PAN/TILT bu tton on the corresponding chann els in the CAMERA me nu, then the PAN/TILT window will be disp layed as shown in [Fig. 7-36 ] . ▫ Click the (EXIT) button to return to the CAMERA menu. [Fig.
Stand-a lone DVR I nstructio n M anual 96 ▫ Pan/Tilt Vendor sele ct Click the “PAN/TILT” button in the PAN/TILT window, then the vendor lists will show up.
7. Setu p 97 ▫ Baud rate Click the “BAUD RATE” button in the PAN/TILT w indow and choose a value among 1200bps, 2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps and 115200bps on the Baud Rate pop-up window by clicking the mouse. [Fig. 7-41 BAUDRATE butto n ] [Fig.
Stand-a lone DVR I nstructio n M anual 98 ▫ Stop Bits Click the “STOP BITS” button in the PAN/TILT window and select 1 or 2 on the Stop Bits pop-up window by clicking the mouse.
7. Setu p 99 7-4.6. Display ▫ Clic k the DISPLAY button in the CAMERA menu and select the ON or OFF. If the “ON” is selected, the camera na me (camera title) in th e LIVE mode will be displayed on the screen. If the “OFF” is selected, th e camera name (camera title) in the LIVE mode won’t be displayed.
Stand-a lone DVR I nstructio n M anual 100 7-5. AU DI O ▫ Click on the AUDIO b utton in the SETU P menu and then the AUDIO men u will be displayed on the screen. ▫ Click th e (EXIT) button to return to the SETUP menu . [Fig. 7- 52 AUDIO menu ] 7-5.
7. Setu p 101 7-6. RE CO RD ▫ Click the “RECORD” button in the SETU P menu and then the RECORD menu will be displayed as shown in [Fig. 7-54 ] . ▫ Click th e (EXIT) button to return to the SETUP menu .
Stand-a lone DVR I nstructio n M anual 102 7-6.2. All Manual / Timer recording button ▫ Click th e All Manual / T imer record ing button in the RECORD menu , then the All Manual / Timer recording button will be displayed as shown in [Fig.
7. Setu p 103 7-6.3. All Motion ON / OFF, Sensitivity Setting ▫ Click the button in the RECORD menu, then the ALL MOTION setup pop-up window will be displayed as show n in [Fig. 7-59] . ▫ By clicking th e mou se, select the on the pop-up window (See [Fig.
Stand-a lone DVR I nstructio n M anual 104 7-6.4. All Sensors ON / OFF ▫ Click the butt on in th e RECORD menu, then the ALL SENSOR setup pop-up window will be displayed as show n in [Fig. 7-62] . ▫ B y clic king th e mouse, select the on the pop-up window (See [Fig.
7. Setu p 105 [Fig. 7-64 Record Size pop-up window ] 7-6.6. Recording Speed ▫ Click the F/S (Frames Per Second s: Recording Speed) button on each of the channels in the RECORD menu, then the Recording Speed pop-up window will be displayed as shown in [Fig.
Stand-a lone DVR I nstructio n M anual 106 30 25 15 12 10 8 7 6 5 5 3 3 2 2 1 1 NTSC OFF PA L OFF [Fig. 7-67 Recordin g Speed for each chan nel ] 7-6.7. Recording Quality ▫ Click the QUALITY bu tton on each of the channels in the RECOR D menu, then the QUALITY pop-up window will be displayed as show n in [Fig.
7. Setu p 107 7-6.8. Recording Mode The factory default setting for Recording is the Manual Recording (or called Continuous Recording ), which ke eps record ing continuo usly if the OVERWR ITE is set ON in the DISK MANAGE menu.
Stand-a lone DVR I nstructio n M anual 108 7-6.9. Recording by Motion Detection When the menu of motion is properly set up (See section 7-6.3 for all the channels and this section for e ach of the channels) and de tected motion of objec ts, the system begins recording automatically.
7. Setu p 109 ▫ Pre- Ala rm T ime Set up Allows y ou to reco rd a se ction o f video ju st pr ior to Mo tion or Sensor activation. Cli ck the mouse on the PRE in the MOTION me nu and choose one of the values among 1 through 30 seconds in the pop-up table by clicking.
Stand-a lone DVR I nstructio n M anual 11 0 ▫ Region The Mot ion De tect ion Are a displ ays in blue on t he scr een, an d it tu rns to doubly-boxes when the motion is detected. The white color on the screen represents none of detection area. There are three kinds of REGION settings as below .
7. Setu p 111 By All Set Right-click on th e setting window for Motion Detection Area ( [Fig. 7-75] ), and then the pop- up setting window for Motion Detection Area will be d isplayed ( [Fig. 7-76] ). By cl icking the mous e, sel ect the button on the pop-up setting window.
Stand-a lone DVR I nstructio n M anual 11 2 - All Clear Right-click on the setting window for Motion Detection Area ( [Fig. 7-75 ] ), a nd then the pop-up setting window for Motion Detection Are a will be displa yed ( [Fig. 7-76 ] ). By clicking the mou se, select th e button on the pop-up setting window in order to clear the Motion Detect Area.
7. Setu p 11 3 By Window Se t Righ t-cl ick on t he set ting window f or Mot ion Det ect ion Ar ea ( [Fig. 7-75] ), an d th en th e p op- up setting window for Motion Detection Area will be d isplayed ( [Fig. 7-76] ). By clic king the mouse, select the button on the pop- up setting w indow.
Stand-a lone DVR I nstructio n M anual 11 4 - Window Clear Right-click on th e setting window for Motion Detection Are a ( [Fig. 7-75] ), and then t he pop-up setting window for Motion Detection Are a will be displayed ( [Fig.
7. Setu p 11 5 By Each Ce ll Right-click on th e setting window for Motion Detection Area ( [Fig. 7-75] ), and then the pop- up setting window for Motion Detection Area will be d isplayed ( [Fig. 7-76] ). By cl icking the mous e, sel ect the button on the pop-up setting window.
Stand-a lone DVR I nstructio n M anual 11 6 Note : Please pay attention to the follo wing directions in order to use the Motion Detection function properly: • Adjust the sensitivity level and motion area to fit your requirements. • Do not use this function in an area where many objects are continuously moving.
7. Setu p 11 7 7-6.10. Recording by Sens or (PIR Sensor) ▫ Click the mouse on the button for each of the channels in the RECORD menu, and then the SENSOR men u will be displayed o n the screen as show n in [Fig. 7-84] . ▫ Click th e (EXIT) button to return to th e RECORD menu .
Stand-a lone DVR I nstructio n M anual 11 8 ▫ Pre-Alarm Time Setup Allows you to record a section of video just prior to Sensor activation. Click t he mo use on the PRE in the SENSOR menu and choose one of the values among 1 through 30 seconds in the pop-up table by clicking.
7. Setu p 11 9 7-7. NETWORK ▫ Click the “NETWOR K” button in the SETUP menu , and then the NETWORK menu will be displayed on the screen as shown in [Fig. 7-90] . ▫ Click the (EXIT) button to return to th e SETUP me nu. [Fig. 7-90 NETWORK menu ] 7-7.
Stand-a lone DVR I nstructio n M anual 120 [Fig. 7-91 IP Mode butt on ] [Fig. 7-92 IP Mode po p-up window ] 7-7.2. GATEWAY, SUBNE T, IP ADDRESS ▫ Click the GATEWAY / SUBNET / IP ADDRES S button in the STATIC IP MODE, then the On Screen Keyboard will ap pear.
7. Setu p 121 7-7.3. Port ▫ PORT is the TCP address of the program, which is used to connect to the ne twork viewer. It can be set from 1 to 65535 values.
Stand-a lone DVR I nstructio n M anual 122 7-7.5. MNS (MAC NAME SER VER) As a sort of DDNS, two servers in our company are being operated so that our client can access DVR with a Dynamic IP address. If one of servers stops operating, the other one w ill automatically start w orking.
7. Setu p 123 ▫ IP ADDRESS / PORT DO NOT CHANGE THE IP ADDRESS AND PORT NUMBER IN THE MNS MENU IF YOU DON’T HAVE ANY SPECIAL SERVER TO ACCESS YOUR DVR WITH A DYNAMIC IP ADDRESS. IF Y OU CHANGE THEM, Y OU CAN’T NOT ONLY USE OUR MNS (MAC NAME SERVER), BUT ALSO YOUR NETWORKING WILL BE DISCONNECTED.
Stand-a lone DVR I nstructio n M anual 124 ▫ SERVER - Choose the SERVER button in the DDNS menu by clicking the mouse or pressing the buttons on the remote controller and select the DYNDNS.ORG (or NO-IP.ORG) provided by www.dyndns. org (or www .no-ip .
7. Setu p 125 7-7.7. HOW TO SETUP AND USE THE DDNS 7-7.7.1. Router. It has to be set as a virtual server (or port forw arding) in order to utilize the DDNS. There are a lot of manufacturers on the market. Please read the pro vided manual thoroughly before setting or visit our website at www .
Stand-a lone DVR I nstructio n M anual 126 7-7.8. EMAIL NOTIFICATION ▫ Email notification enables to notify events (senso r, motion, video lo ss, power on /off, power loss, record on/off, record fail, replay or copy start/stop) by sending emails to one or two email accoun ts.
7. Setu p 127 ▫ EMAIL ADDRESS SETUP [Fig. 7-105 Keyboard window ] - Click one of email address bo xes and then the On Screen Keyboard will show up as shown [Fig. 7-105] . - Dele te the curren t email address with the button a nd enter an email address by using the On Screen Keyboard.
Stand-a lone DVR I nstructio n M anual 128 ▫ EVENT Setu p - Click the check boxes below to choose the events you need. - To delete, click the check box again.
7. Setu p 129 Note : If the motion is sele cted in [Fig. 7-108] , you m ay recei ve nume rous emails from the DVR systems due to a couple of factors such as continuous moving objects, a strong and changing lighting source, low resolution and no ises of cameras.
Stand-a lone DVR I nstructio n M anual 130.
131 8. Remote Host Program.
Stand-a lone DVR I nstructio n M anual 132 CONTENTS 8-1. REMOTE PROG RAM OVER VIEW .......... ....................... ........................... ...................... 133 8-2. INST ALLING THE PROGRAM TO PC . ............................ ............
8. R EMOT E H OST PRO GRA M 133 8-1. Remot e Program O vervie w The Remote Host Program allow s you to view live video, search archived video, control PTZ cameras and to set up the exact same menus as the DVR does. The DVR system can have up to 10 simultaneous Remote Connections.
Stand-a lone DVR I nstructio n M anual 134 8-2. Installing the Program to PC Install the program into PC by using program CD (supplied) as f ollow s. How to install the pro gram 1. Start the operating system (Window s 2000/XP/VISTA). 2. Insert the program CD into CD-ROM drive.
8. R EMOT E H OST PRO GRA M 135 8-3. Internet Explorer When you are trying to use this function, it is high ly recommended that the passw ord should be turned ON in the SYSTEM menu not to enab le unauthorized personnel to access your DVR system (See section 7-2.
Stand-a lone DVR I nstructio n M anual 136 • Click on the follow ing message. This site wants to inst all the following add-on: ‘DVR Master’ from ‘Clover Electron ics USA ’. If you trust the website and the ad d-on and want to install it, click here….
8. R EMOT E H OST PRO GRA M 137 8-4. Remot e Host [Fig. 8- 5 DVR Mas ter] ○ 12 ○ 13 ④ ⑥ ⑤ ⑦ ③ ⑪ ○ 14 ⑧⑨⑩ ○ 16 ○ 15 ① ②.
Stand-a lone DVR I nstructio n M anual 138 Table. Desc rip t ion of Rem ote Host Progr am But ton ① Minimization Button ② Close But ton ③ Current Time ④ Connection But ton ⑤ Setup Button ⑥ Player Executio n Button ⑦ Captur e Button ⑧ Multi- Mode ⑨ Termi nal Mode ⑩ E-map Butt on ⑪ Splits the screen in 4, 8 Ch.
8. R EMOT E H OST PRO GRA M 139 8-4.1. Setup [Fig. 8-6 HOST CONFIG window] ① Version number It represents the current version number of the Firmw are. ② Copy Refer to Section 8-4.10 in regards to copying methods after selecting one between the Quick Copy a nd the Live + Co py.
Stand-a lone DVR I nstructio n M anual 140 ③ Network Image ▫ Size Ch oose a Size (Resolution) among D1, Ha lf D1 and CIF you wish to display on the DVR Master by clickin g the mouse. Th is setting does not affect the DVR . ▫ Quality Choose one among LOW, NORMAL, HIGH and BEST you wish to display on the DVR Master by clickin g the mouse.
8. R EMOT E H OST PRO GRA M 141 [Fig. 8-7 Firmwar e Files ].
Stand-a lone DVR I nstructio n M anual 142 8-4.2. Connection There are two ways to access the DVR through the DVR Master as follow s. ▫ With Set Direct setting - Clic k the “CONNE CT” but ton on the DV R Mast er and then t he “Con nect Dialog menu” a s shown in [Fig.
8. R EMOT E H OST PRO GRA M 143 - Choos e a Do main Nam e in the Name L ists and c lick the “CON NECT” button in or der to access the DVR. - T o register the Domain name (Host Name), re fer to section 7-7.7 .2 on page 125. [Fig. 8-8 Connect Dialo g] 8-4.
Stand-a lone DVR I nstructio n M anual 144 8-4.4. Status If the Status button on the DvrMaster is selected by clicking the mouse, the DvrMaster displays the DVR’s status related to connections of cameras, s ensors, relay outputs and remaining HDD (Hard Disk Drive) capacity available for re cording.
8. R EMOT E H OST PRO GRA M 145 8-4.5. Replay It is possible to replay the recorded data from the DVR system by using the Replay button in [Fig. 8-10] in the Mu lti mode only (refer to section 8-4.
Stand-a lone DVR I nstructio n M anual 146 ▫ Play back C ontro l [Fig. 8- 12 Playba ck contr ol] Playba ck control b uttons : Button for fast rewinding up to 128 times by repea tedly pressing. : Button for viewing previous frame in still image. : Play button.
8. R EMOT E H OST PRO GRA M 147 8-4.6. COPY It is possible to copy the recorded data fro m the DVR system to a client PC by using the Copy button in [Fig. 8-13 ] in the Mul ti mode only (re fer t o sectio n 8-4.9. 2). - Cl ick the Copy butt on as s hown in [Fig.
Stand-a lone DVR I nstructio n M anual 148 “ALL” in yellow represents that all the came ras are selected. The camera channel number(s) in yellow represents that the corresponding channel(s) are selected . - Click the C opy ( ) butto n and then t he copyi ng pr ogres sive ba r as sho wn [Fig.
8. R EMOT E H OST PRO GRA M 149 8-4.7. Switch the Normal Screen to Full Screen ▫ Click the “FULL SCREEN” button on the DvrMaster as shown [Fig. 8-16] and then the current screen size will be enlarged to fit the mon itor’s screen size, but the r esolution will be low ered.
Stand-a lone DVR I nstructio n M anual 150 8-4.8. Speaker / Microphone [Fig. 8-18 Speaker / Microphone ] Buttons of Remote Host Program ① Audio Input channel selection: Select the same audio channel as the DVR has. ② PC Speaker ON/OFF: Turn the Speaker ON or OFF by clicking the mouse.
8. R EMOT E H OST PRO GRA M 151 8-4.9. Connection mode There are two kinds of connection mode (See [Fig. 8-19] ) on the DvrMaster . Select one of them by cl icki ng the mo use dep endin g on you r appli catio n.
Stand-a lone DVR I nstructio n M anual 152 8-4.9.2. Multi mode It is impossib le to contro l (Recording on/o ff, Se tup, System Statu s, Display and OSD) the DVR system in the Multi mode except Replaying and Copying (See section 8-4.5, 8-4.6 on page 145-147), but th e image o f channel 16 w ill always display on the monitor and the DvrMaster.
8. R EMOT E H OST PRO GRA M 153 8-4.10. Copy in the Terminal mo de (not ava ilable on this version) There are four icons such as NETWORK, USB, CD and DVD in the COPY menu of the Multi mode.
Stand-a lone DVR I nstructio n M anual 154 [Fig. 8-22 Copying in the Terminal mode] [Fig. 8-23 Copy Completion].
8. R EMOT E H OST PRO GRA M 155 8-4.11. E-Map E-Ma p enabl es us ers to d ispla y the ca meras on the di gital ma p for bet ter m onito ring. The digital map should be a BMP file and you can make it (the higher resolution the better) or use the E-map samples saved in the E-ma p folder (See Fig.
Stand-a lone DVR I nstructio n M anual 156 - To rename, right-click a saved eMap list and click “Rename” on the pop-up window as shown in [Fig. 8-27] . - To delete, right-click a saved eMap list and click “Delete eMap” on the po p-up window as shown in [Fig.
8. R EMOT E H OST PRO GRA M 157 8-4.11.3. Usage of camera position The small squares with channel numbers on the map indicate the camera position. The blue screen represents that the corresponding camera is not connected to the DVR system. - Double -clic k the imag e to dis play a fu ll scr een.
Stand-a lone DVR I nstructio n M anual 158 8-4.12. Pan / Tilt & Preset Y ou can contro l the PTZ camera through DvrMa ster . Th is featur e is basica lly identical to what the DVR system has.
8. R EMOT E H OST PRO GRA M 159 8-5. PLAYER [Fig. 8-33 Playe r] Char t. Butto n of P l ayer P r ogram ① Status w indow ( Play mode, D ate, Time) ② Calendar ③ Search button for replaying ④ Conv.
Stand-a lone DVR I nstructio n M anual 160 ① Status window ( Play mode, D ate, Time) It indicates th e play mode , date and time. [Fig. 8-34 Status w indow] ② Calend ar It shows the date currently being rep layed.
8. R EMOT E H OST PRO GRA M 161 - Click the Conve rt AVI button o n the Player and the Convert AVI w indow will be displayed (See [Fig. 8-36] ) - Click on the SELECT butto n for Source on the Convert AVI window and th e Convert AVI window or the DVR Player w ill be displayed (See [Fig.
Stand-a lone DVR I nstructio n M anual 162 [Fig. 8-39 Select one of the Channels] [Fig. 8-40 Start Convert B utton] How to play the A V I files By using Windows media player: - Click the OPEN button on the Convert AVI w indow and double click one of the AVI files to play.
8. R EMOT E H OST PRO GRA M 163 ⑤ Configuration [Fig. 8- 41 Config uration w i ndow] - If the “Fit to w indow” is selected in [Fig. 8-41] , it will au tomatically fit to the Player w indow in [Fig. 8-33 ] (720x480) even though the recorded data is CIF (360x240) in the playback mode.
Stand-a lone DVR I nstructio n M anual 164 click the Program Files – click DvrMaster – click Printed Files) in J PEG file format. [Fig. 8-42 Print comman d window] [ F i g . 8 - 4 3 P r i n t i m a g e ] ⑧ Video Enhance Ref er to se ction 6 -8 on pa ge 53.
8. R EMOT E H OST PRO GRA M 165 ⑪ Search slider for replaying The slider can be moved left and righ t by clicking the slider on the bar and dragging it or just click the bar to search the recorded data. [Fig. 8-46 Replay Search Slider] ⑫ Replay Control Refer to section 6-10.
Stand-a lone DVR I nstructio n M anual 166.
167 9. APPENDIX CONTENTS RECORDING TIME T ABLE ......... ............................ ........................... ........................... ..........168 FA CT O R Y DEF AUL T SETTINGS ........................... ............................ .......
Stand-a lone DVR I nstructio n M anual 168 Recording time table HDD: 500GB Recording Resolution: Ha lf D1 (720 x 24 0) B a s e d o n 8 c a m e r a s H O U R S Each (Total) 30 fps (240fps) 15 fps (120fps) 10 fps (80fps) 7 fps (56fps) 5 fps (40fps) 3 fps (24fps) 2 fps (16fps) BEST 58.
APPENDIX 169 Factory default settings (1) LIVE SCREEN 8 SP LIT OSD ON (2) TIME / DATE DISPLA Y : ON TIME FORMA T : 24 HOUR DA TE FORMA T : YYYY/MM/DD (3) LOAD / BACKUP CONFIG NONE LISTS (4) USER ACCOU.
Stand-a lone DVR I nstructio n M anual 170 D I S P L A Y : O N SEQ DISPLAY DWELL : 1 SEC (8) AUDIO AUDIO 1 : RELA TE D CAMERA CH 1, REC ORD OFF , LEVEL 5 AUDIO 2 : RELA TE D CAMERA CH 2, REC ORD OFF ,.
APPENDIX 171 (10) NE TWORK TYP E : DY NAMI C PORT : 5800 SERVER 1 MOD E : DISABLE SERVER 1 IP ADDRESS : 65.60.84.15 SERVER 1 POR T : 300 SERVER 2 MOD E : DISABLE SERVER 2 IP ADDRESS : 65.60.84.15 SERVER 2 POR T : 300 SERVER SITE NAME : SXXX XXX (MAC ADDRESS) (11) VIDEO - CAMERA INPUT BRIGHTNESS : 128 (Ma x.
Stand-a lone DVR I nstructio n M anual 172.
173 10. FAQ CONTENTS I CANNOT LOGIN ..... ........................... ....................... ............................ ........................... .
Stand-a lone DVR I nstructio n M anual 174 I can not login ▶ Plea se check if the link LED of DVR a nd LAN port of PC are lit. ▶ Plea se check if the IP address on DVR and the PC is identical. Check SYSTEM STATUS by pressing STATUS button of DVR (Available on LIVE mode and RECORD mode.
175 11. Limited 1Year Warranty This warranty gives the original purchaser specific legal rights and you may also have other rights, which may vary from state to state. If our products do not function because of any defect in material or workmanship, we will repair it for free for 1 year on parts and labor from the date of original purchase.
Stand-a lone DVR I nstructio n M anual 176 12. How to obtain Factory Service • Original purchaser must f ill out the warranty card and mail it to the factory with the model number, serial number and the date of purchase. • We will re pair or replace, and return the system to the owner unde r this limited warranty.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Clover Electronics LCD2084 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Clover Electronics LCD2084 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Clover Electronics LCD2084, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Clover Electronics LCD2084 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Clover Electronics LCD2084, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Clover Electronics LCD2084.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Clover Electronics LCD2084. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Clover Electronics LCD2084 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
