Manuel d'utilisation / d'entretien du produit ATA 186 du fabricant Cisco Systems
Aller à la page of 166
Corporate He adquarters Cisco System s, Inc . 170 West Ta sman Drive San Jos e, CA 95134 -1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Cisco A T A 1 86 and .
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCT S IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BU T ARE PRESEN TED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED.
iii Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adapto r Administra tor’s Guide (SCC P) OL-3141-01 CONTENTS Preface ix Overvi ew ix Audienc e ix Organi zation ix Conv enti ons x Relat ed Do cume ntatio n xii Obtain ing Docu mentati on xii Cisco.
Cont ent s iv Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Instal ling the Cis co ATA 2-1 Network Re quiremen ts 2-2 Safety Reco mmendation s .
Content s v Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Parameter s and Defaults 5-1 Config uratio n Text Fi le Templa te 5-2 User Int erface.
Cont ent s vi Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Tone P aramet er Synt ax 5-21 How to Calcul ate Sca ling Fac tors 5-22 Recommende d.
Content s vii Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Runn ing the Ex ecu table Fi le 7-4 Upgrade Requ irements 7-5 Syntax 7-5 Upgrade Pr.
Cont ent s viii Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Cisco ATA Style Conf eren ce Ca lling Proc edure A-7 Voice Menu Codes B-1 Cisco A.
ix Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adapto r Administra tor’s Guide (SCC P) OL-3141-01 Preface Overview The Cisco AT A 186 and Cisco AT A 188 An alog T elephon e Adapt or Adm inistra.
x Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Preface Conv ent ions Conven tions This docu ment u ses t he fol lowing conventions : • Altern ativ e keywords are groupe d in braces and se parated by vertica l bars (fo r example, { x | y | z }).
xi Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Pre face Convent ions Ti p Means the follo wing information will help yo u solve a p r oblem . The tips informat ion migh t not be troublesh ooting or even an acti on, but co uld be use ful inf ormati on, si milar to a Timesav er .
xii Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Preface Related Documenta tion Related Documentation • Read Me F irst - AT A Boot Lo ad Inf.
xiii Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Pre face Obtaining Documentation Internatio nal Cisco web sites can be accessed from this URL: http://www .cisco.co m/public/countr ies_languages.
xiv Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Preface Obtain ing Technical Assista nce Obtaining Tech nical Ass istance Cisco pr ov ides Cisco .com, which inclu des the Cis co T echnic al Assistan ce Cente r (T A C) W ebsit e, as a sta rting point for all techni cal assis tanc e.
xv Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Pre face Obtaining Additional Publications and Information All custo mers, pa rtners , and resel lers who ha v e a va lid Cisc o service co ntra ct hav e com plete acces s to the technical support resources on the Cisco T A C website.
xvi Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Preface Obtainin g Additi onal Publicat ions and Info rmation • Int ernet Pr otoc ol J our .
C HAPTER 1-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 1 Cisco Analog Telephone Adaptor Overview This secti on describe s the hardwar e and .
1-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Overview of the Skinny Client Control P ro.
1-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Hard ware Overv iew Figur e 1 -4 SCCP Archit ec tur e Hardware Overview Cisco A T As are co mpact, ea sy-to-in stall de vices.
1-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Hardwa re Overview The unit provides t he fol lowing conne ctors and ind icators : • 5V po we r connec tor .
1-5 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Software Features Note If the func tion button blinks sl o wly , the Cisco A T A cannot find the DH CP server .
1-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Software F eatures When ope rating with a low-bit-rat e codec, the Cisco A T A ca n support either two G.
1-7 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Software Features • Ring cade nce fo rma.
1-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Software F eatures Mid-call Services The method of initiat ing and using mid-call services for the SCCP protocol dif fers accor ding to mode.
1-9 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Installati on and C onfigurat ion Overvie .
1-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Installa tion and Con figuration O vervie.
C HAPTER 2-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 2 Installing the Cisco ATA This secti on provides instruc tions for in stalling the Ci sco A T A 186 and Cisco A T A 188.
2-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 2 Insta lling the Cisco ATA Netwo rk Requiremen ts Network Requi rements The Cisc o A T A acts as an end point on an IP te lephony network.
2-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 2 Insta lling the Cisco ATA What Y ou Need • Re gulato ry Complian ce and Safety In .
2-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 2 Insta lling the Cisco ATA Installa tion Proced ure Figur e 2-1 Cisco A T A 18 6 Rea.
2-5 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 2 Insta lling the Cisco ATA Install atio n Procedu re If you ar e connec ting a t elep.
2-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 2 Insta lling the Cisco ATA Power-D own Procedu re Power-Down Procedure Cautio n If you need t o power down Cisco A T A 186 or C isco 18 8 at any tim e, use the fol lowing power -down procedu re to prev ent d amage to the unit.
C HAPTER 3-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 3 Configuring the Cisco ATA for SCCP This se ction de scribes how to configure t he C.
3-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Defaul t Boot Load B ehavior • Cisco A T A.
3-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Specif ying a Pr econfig ured VLAN ID or Disabl ing VLAN IP Enc apsulat ion 4. The Ci sco A T A contacts t he Cisco CallManager TFTP serv er and do wnloads the app ropriate .
3-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Specifyin g a Preconfig ured VLAN ID or Disa.
3-5 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Specif ying a Pr econfig ured VLAN ID or Disabl ing VLAN IP Enc apsulat ion In hexade cimal format , this v alue is 0x0 0000052 .
3-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Steps Nee ded to Configur e the Cisco ATA St.
3-7 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Configur ing the C isco ATA Using a TFT P Server.
3-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Configur ing the Cisco ATA Using a TFTP Ser .
3-9 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Configur ing the C isco ATA Using a TFT P Server.
3-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Configur ing the Cisco ATA Using a TFTP Ser.
3-11 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Configur ing the C isco ATA Using a TFT P Serve.
3-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Configur ing the Cisco ATA Using a TFTP Ser.
3-13 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Configur ing the C isco ATA Using a TFT P Server Step 3 Run the cfgfmt.e xe tool, which is b undled with the Cisco A T A software, on the ata< macaddre ss > .
3-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Configur ing the Cisco ATA Using a TFTP Ser ver The fo llo wing command an d output show an example of this comm and.
3-15 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Configur ing the C isco ATA Using a TFT P Serve.
3-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Configur ing the Cisco ATA Using a TFTP Ser ver Note If no DH CP server is fou nd and t he Ci sco A T A is prog rammed to find o ne, th e fu nction butto n continue s to blink.
3-17 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Configur ing the C isco ATA Using a TFT P Server Step 2 Use the default value of 1 for th e Cisco A T A para mete r DHCP .
3-18 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Voice Co nfiguration Menu • DNS1IP • DN.
3-19 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Voice C onfigu ration Me nu Note If you are using th e voice configura tion me nu to stati cally c onfigure the Cisco A T A I P address, you must disable DHCP by setting its value to 0.
3-20 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Voice Co nfiguration Menu Entering Alpha numeric Value s Some v oice co nf igurati on menu options re quire you to enter alp hanumer ic charact ers.
3-21 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Cisco ATA Web Co nfigur ation Pa ge Cisco ATA W.
3-22 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Cisco ATA We b Configuration Pa ge Figur e .
3-23 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Resetting the Cisco ATA Using Cisco CallManager.
3-24 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Upgradi ng the SCCP Signaling I mage Step 6 Click the Reset Pho ne b utton on the Phone Configuration sc reen.
C HAPTER 4-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 4 Adding the Cisco ATA to the Cisco CallManager Once you ha ve configured the Cisc o .
4-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapter 4 Adding th e Cisco ATA to the Cisc o CallMa nager Adding Cisco A TAs M anually Adding Cisco ATAs Manually Use the follo wing proced ure to a dd Cisco A T As manually us ing the Cisco CallManager Admin istration application .
4-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 4 Add ing the Cisco ATA to the Cisco CallMan ager Using the Cisco Bulk Administration Tool (BAT) Step 11 Click the Insert b utton (called the Update b utto n in Ci sco Call Manager ve rsion 3 .
4-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapter 4 Adding th e Cisco ATA to the Cisc o CallMa nager Using Auto -Regis trati on • If .
C HAPTER 5-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 5 Parameters and Defaults This se ction provides informat ion on the para meters and d efaults t hat you can use to cr eate yo ur own Cisco A T A configuration file.
5-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Configur ation T ext File Templ ate Note This sec tion cont ains r ecomme nded v alue s for t he Unite d State s and Swe den as conf igur ation e xamp les for cert ain param eters.
5-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Use r I nte rfa ce (UI) Pa ram ete r NPrintf:0 TraceFlags:0.
5-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Parameters for Configurat ion Meth od and Encryp tion Pa.
5-5 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Param eters fo r Configur ation Met hod and Encrypt ion Note From the voice configurati on menu , you ca n only enter t he IP add ress; from the w eb configura tion page , you can enter the actual URL.
5-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Network Para meters Voice Configuration Menu Access Code.
5-7 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Network Param eters StaticIp Description Conf igure the Cisc o A T A IP a ddress using th is parameter if the DHCP parameter is set to 0.
5-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Account Information Param eters StaticNetMask Description Conf igure the statically assigne d subnet mask using this parameter if the DHCP parameter is set to 0.
5-9 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Ac cou nt In fo rma tio n Par am ete rs Range Maxi mum 51 c.
5-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s SCCP Mode Parame ter SCCP Mode Pa rameter This paramete r (UseMGCP) is locate d in the yello w portion of the Cisco A T A web conf iguratio n page.
5-11 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers • CallerIdM ethod, pa ge 5-1 4 .
5-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Operating Parame ters Default 3 Voice Configuration Men.
5-13 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers ConnectM ode Description This pa ramet er is a 32 -bit bitm ap to co ntro l the conn ection m ode of t he select ed ca ll signall ing pro tocol.
5-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Operating Parame ters CallerIdMethod Description This 32 -bit parame ter spec ifies the s ignal fo rmat to use for b oth FXS ports for ge neratin g Calle r ID format.
5-15 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers • Bits 3- 6—These bits are for th e Start dig it (v alid v al ues are 12 for “ A ,” 13 for “B,” 14 for “C,” a nd 15 fo r “D.
5-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Operating Parame ters DNS2IP Description This par ameter is for setting the secondary dom ain name se rver (DNS) IP , if the DHCP server doe s not provide one.
5-17 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers Voice Configuration Menu Access Code 931 Related Parameters • TftpU RL, p age 5- 4 • CA0orCM 0 and CA1orC M1, page 5-9 NumTxFrames Description Not used for SCCP .
5-18 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Operating Parame ters Default 0x2 Voice Configuration M.
5-19 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers Valu e Type Bitmap Default 0.
5-20 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers RingCaden ce Description Use this parameter to specify th e internal a nd ex ternal ri nger caden ce pattern, expressed as a tr iplet of inte gers “a,b , and c”.
5-21 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers Call-Pro gress Ton e Paramet.
5-22 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers • total-t one-t ime controls th e length of time the tone is audibl e (0 to 0xf f f f).
5-23 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers • CallW a itT one = ".
5-24 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers BusyTone Description The Cis co A T A plays t he b usy to ne when the ca llee is b usy .
5-25 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers RingbackTone Description The Ci sco A T A play s the r ing-b ack tone when the callee is bein g aler ted b y the ca lled de vice.
5-26 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers Confir mTone Description T.
5-27 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers TraceFlags Description This parameter is for diagnostic use.
5-28 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers.
C HAPTER 6-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 6 Configuring and Debug ging Fax Services The Cisco A T A provides two modes of fax services t hat are ca pable of intern etworki ng with Cisco IOS ga te wa ys o v er I P netw or ks.
6-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Using F ax Pass -through Mode Note Th e Cisco A T A can a lso acce pt stand ard-ba sed prot ocol-level code c switch request s, but canno t send such re quests.
6-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Using Fax Pass- through Mo de ConnectMode Description The Connec tMode param eter is a 3 2-bit v alue.
6-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Using F ax Pass -through Mode Note For detaile d informat ion on settin g up yo ur IOS gate ways and on fea ture a v ailability , ref er to th e documen t Cisco F ax Service s o ver I P .
6-5 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Using Fax Pass- through Mo de Dial-Peer Lev.
6-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Usin g FAX Mode Using FAX Mode Use fax mode when the gate w ays in the network do not support fax pass-through mode or dial -pe er configurat ion.
6-7 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Servic.
6-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax S.
6-9 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services Proc edure Step 1 <IP addre ss>.<po rt> <IP add ress> is the IP add ress of your PC.
6-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax .
6-11 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Servi.
6-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax .
6-13 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services Stream f iles a re labeled with an integ er tag be ginnin g with 00.
6-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices <03.pcm>: (G711u) 2.213:10000 => 2.
6-15 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services [ 25]<2.213=>2.11 6> Codec G723 [ 26]<2.
6-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax .
6-17 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services • NSE signa ling packet s are sent from <3.
6-18 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices Example 6 -7 F ax Mode F ailur e ---------- FAX Summary 1 ---------- [ 37]<2.
6-19 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services Possible Cause for Failure • Cisco fax r elay opti on is n ot disab led on the gateway .
6-20 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax .
C HAPTER 7-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 7 Upgrading the Cisc o ATA Signaling Image Thi s sect ion d escri bes t wo me thod s .
7-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 7 Upgradi ng the Ci sco ATA Sign aling I mage Upgradi ng the Signali ng Image Via Ci sco CallMana ger Upgrading th e Signaling Imag e Via Cisc o CallManager This fe ature i s support ed in C isco Ca llManage r version 3.
7-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 7 Upg rading the Cisco ATA Signaling Image Upgrading the Signaling Image Via Cisco Cal.
7-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 7 Upgradi ng the Ci sco ATA Sign aling I mage Upgradi ng the Signali ng Image Man ually Upgrading th e Signaling Imag e Manually This section descri bes how to manua lly upgrade the Cisco A T A with the most recent signal ing image.
7-5 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 7 Upg rading the Cisco ATA Signaling Image Upgradi ng the Sign alin g Image Manu ally Upgrad e Requ irement s The follo wing list contains th e requireme nts for using the a ta186us.
7-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 7 Upgradi ng the Ci sco ATA Sign aling I mage Confirming a Su ccessful Sig naling Im.
7-7 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 7 Upg rading the Cisco ATA Signaling Image Conf irmi ng a Su cces sful Sig nalin g Im .
7-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 7 Upgradi ng the Ci sco ATA Sign aling I mage Confirming a Su ccessful Sig naling Im.
C HAPTER 8-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 8 Troubleshooting This se ction de scribes troubleshoot ing pr ocedures f or the Cisc.
8-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 8 Trouble shoot ing Symptoms and Actions Symptoms an d Actions Sympto m Pa rameters with va lues set by using the web ser ver int erface o r voic e conf iguration me nu re vert to their original settings.
8-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 8 Troubleshoot ing Installat ion and Up grade Is sues Sympto m Cannot pl ace ca ll. Possible Cause Equi pment f ail ure on t he netw ork .
8-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 8 Trouble shoot ing Restarting the Cisco CallMan ager Sympto m V oic e prompt returns Up grade faile d message. This ca n only occur i f you are usin g the ex ecuta ble-f ile u pgrade met hod.
8-5 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 8 Troubleshoot ing Debuggi ng Debugging The MS-DOS Windows-based debuggi ng progr am to ol, p reser v .exe, i s incl ude d in every s oftware upgrade package.
8-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 8 Trouble shoot ing Frequent ly Asked Q uestions Frequently Asked Questio ns Q. How can I recover the box if I forgot the pa ssword? A. There ar e two im portant pa ssw ords.
8-7 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 8 Troubleshoot ing Frequent ly Asked Questi ons Q. Can I change th e R T P frame siz e of voi ce codecs fo r the Cisco A T A when usin g with SCCP image ? A.
8-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 8 Trouble shoot ing Cont act ing TA C Contac ting TAC Qualif ied custom ers who need to cont act the Cisco T echnical Ass istance Center ( T A C) must p rovid e the follo wing informatio n: • Product c odes.
A- 1 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 APPEND IX A How to Use Pre-call a nd Mid-call Services This sectio n cont ains end-u ser pr ocedur es fo r pr e-call s ervice s and mid-call se rvices th at t he Cis co A T A supports fo r the SCCP protoco l.
A- 2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix A How to Use Pre-call and Mid-call Services Procedures for Using Pre- call Services Activate Call-Forward-All Use t his feat ure to send a ll call s from o ne te lephone number t o anothe r tele phone n umber .
A-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Append ix A How to Use Pre-ca ll and Mid -call Service s Procedu res for Usi ng Pre-cal l Ser.
A- 4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix A How to Use Pre-call and Mid-call Services Procedures for Using Mi d-call Servi ce.
A-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Append ix A How to Use Pre-ca ll and Mid -call Service s Procedu res for Usin g Mid-ca ll Ser.
A- 6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix A How to Use Pre-call and Mid-call Services Procedures for Using Mi d-call Servi ces Cisco VG248 Conference Call Procedure Step 1 Perform a hookf lash t o place the cur rent c all on hold an d obtai n a se cond di al tone .
A-7 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Append ix A How to Use Pre-ca ll and Mid -call Service s Procedu res for Usin g Mid-ca ll Ser.
A- 8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix A How to Use Pre-call and Mid-call Services Procedures for Using Mi d-call Servi ce.
B-1 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 APPEND IX B Voice Menu Codes This sec tion con tains a quick -refer ence li st of th e voice co nfiguration me nu opti ons for t he Cisco A T A.
B-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendi x B Voice Menu Code s Ta b l e B - 2 lists configura tion codes. For additiona l inform ation ab out these parame ters, see “ Ch apter 5, “P aramete rs and Def aults.
B-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Append ix B Voice Menu Codes Ta b l e B - 3 lists codes use d in t he softwa re upgra de pro cess. For i nformat ion abou t thes e code s, see “ Appe ndix , “U pgrading the C isco A T A Signaling I mage.
B-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendi x B Voice Menu Code s.
C-1 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 APPEND IX C Cisco ATA Specifications This section desc ribes the Cisc o A T A specifications: .
C-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendi x C Cisco ATA Sp ecif ication s Electrical Specification s for Cisco ATA Electrical S.
C-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Append ix C Cisco ATA Specificatio ns Physical Interfaces Physical Interfaces Ringing Chara cteristics Software Specifications T able C-4 Ph ys ical Int erf ac es Description Specification Ethern et T wo RJ-45, IEE E 802.
C-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendi x C Cisco ATA Sp ecif ication s Softw ar e Spe cific ation s Fax G.711 fax pass-t hrough and G.711 fax mode. Enhanc ed fax p ass-thro ugh is su pporte d on th e Cisco A T A.
C-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Append ix C Cisco ATA Specificatio ns Sof tware Sp ecifi cations V oice features • V oice ac ti vity det ection (V AD) • Comfort noise ge nerati on (CNG) • Dynamic jitte r buf fer (adapti v e) V oice-over-IP (V oIP) protocol s • H.
C-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendi x C Cisco ATA Sp ecif ication s Softw ar e Spe cific ation s.
D- 1 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 APPEND IX D SCCP Call Flows This section describes basic call flows for the Cisc o A T A: •.
D- 2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix D S CCP Call Flows Supported SCCP Messa ge Set – StationCapabilitie sRes – Stat.
D-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Appendix D SCCP Call Flows Call Fl ow Scena rios for Success ful Calls Call Flow Scena rios f.
D- 4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix D S CCP Call Flows Call Flow Scena rios for Succes sful Calls T able D-1 A ction De.
D-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Appendix D SCCP Call Flows Call Fl ow Scena rios for Success ful Calls Cisco ATA-to-Cis co CallMan ager-to-Cisc o ATA Figure D-2 illustrates the call flo w betwee n Cisco A T A 1 and Cisco A T A 2 through a Cisco CallMa nager .
D- 6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix D S CCP Call Flows Call Flow Scena rios for Succes sful Calls Step 3 Sta tion Start T one (Ins ide Dial T one )—Cisco CallManager to Cisco A T A 1 Cisc o CallManag er command s Cisco A T A 1 to play a spec ifie d tone.
D-7 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Appendix D SCCP Call Flows Call Fl ow Scena rios for Success ful Calls Step 18 Station Open Rece i ve Channel—Cisc o CallM anager to Cisco A T A 1 Cisc o CallM anager a llo ws Cisc o A T A 1 t o be gin r ecei ving a unicast R TP stream.
D- 8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix D S CCP Call Flows Call Flow Scena rios for Succes sful Calls.
E-1 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 APPEND IX E Performing a Cross-Protocol Upgrade This sect ion describe s how to perform an upgrade f rom the SCCP signaling image to either th e MGCP , SIP or H.
E-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendi x E Perfo rming a Cr oss-Prot ocol Upgrade Exam ple The upg radeco de paramet er value could be : upgrade code :3,0x30 1,0x0 400,0x 0200,19 2.
GL-1 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adapto r Administra tor’s Guide (SCC P) OL-3141-01 GLOSSAR Y Numerics 10BASE-T 10-Mbps baseban d Ethern et spe cification usi ng two pair s of tw isted-pa ir cabl ing ( Categories 3, 4, o r 5): one pair for transmitt ing data and th e other for re ceiving data.
Glos sary GL-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 compr ession Th e ru nning of a data se t throug h an a lgorithm that r educes t he space required to store or th e bandwi dth requir ed to transmit the data set.
Glossary GL-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 FXO Foreign Ex change Of fice. An FXO int erface conne cts to the pub lic switche d telephon e network (PSTN) centr al of f ice and is the interf ace of fered on a stan dard telephone.
Glos sary GL-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 IP Intern et Protocol . Network layer pr otocol in the T CP/IP stack o ffering a con nectionle ss intern etwork service.
Glossary GL-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 P POTS Plain old telepho ne service . Basic telephon e service sup plying stan dard single-li ne telephon es, telephone lines, and a ccess to the PST N.
Glos sary GL-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 SIP Session Initia tion Protocol. Protocol dev eloped b y the IETF MMUSIC W orking Group as an alterna tiv e to H.32 3. SIP fea tures ar e compli ant with IETF RFC 254 3, publis hed in Ma rch 1999 .
Glossary GL-7 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 voice pa cket gateway Gateway platfor ms that enable Intern et tele phony service provider s to offer res idential and b usiness-c lass services for Internet telephony .
Glos sary GL-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01.
IN-1 Cisco ATA 186 and Cisco 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 INDEX Numerics 802.1P Class of Se rvice ( Cos) Bit configu ration 3-9 802.
Index IN-2 Cisco ATA 186 an d Cisco 188 Analog Telephone Adaptor Admini strator’s Guid e (SCCP) OL-3141-01 using T FTP and D HCP ser vers 3-7 Web-based 3-21 Wed-based 3-23 mid-call services style 5-.
Inde x IN-3 Cisco ATA 186 and Cisco 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 E electric al specifications C-2 ena bling and di sab ling p orts 5-8 ena bling user- spe .
Index IN-4 Cisco ATA 186 an d Cisco 188 Analog Telephone Adaptor Admini strator’s Guid e (SCCP) OL-3141-01 manuall y upgrading signa ling image 7-4 maximu m number of digit s in phone num ber 5-15 m.
Inde x IN-5 Cisco ATA 186 and Cisco 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 S safety recomme ndations 2-2 scaling f actor calc ulation 5-22 SCCP arch itect ure 1-3 ov.
Index IN-6 Cisco ATA 186 an d Cisco 188 Analog Telephone Adaptor Admini strator’s Guid e (SCCP) OL-3141-01 using ex ecut able file 7-4 upgradi ng the sign aling image 3-24 User Inter face (UI) Pa ramet ers 5-3 user i nterfac e pa ssword 3-9 UseTFTP parameter 5-4 using atapn ame.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Cisco Systems ATA 186 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Cisco Systems ATA 186 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Cisco Systems ATA 186, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Cisco Systems ATA 186 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Cisco Systems ATA 186, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Cisco Systems ATA 186.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Cisco Systems ATA 186. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Cisco Systems ATA 186 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.