Manuel d'utilisation / d'entretien du produit 0L-11350-01 du fabricant Cisco Systems
Aller à la page of 518
Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco IOS S of tw are Configuration Guide f or Cisco Air onet A ccess P oints Cisco IOS Releases 12.
THE SPECIFICATION S AND INFORMATION REGARDING THE PRODUCTS IN THIS MA NUAL ARE SUBJECT TO CHAN GE WITHOUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED.
iii Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 CONTENTS Preface xix Audience xix Purpose xix Organization xx Conventi ons xxi Related Publication s xxiii Obtai.
Contents iv Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Using Online Help 2-14 Changing the Loca tion of Help Files 2-14 Disabling the Web-Browser Interface 2-.
Contents v Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Default Settings on the Express Setup Page 4-14 Configuring Basic Security Settings 4-15 Understanding E .
Contents vi Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Controlling Access Point Acce ss with TACACS+ 5-15 Default TACACS+ Configuration 5-15 Configuring TACAC.
Contents vii Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Creating a Banner 5-35 Default Banner Configuration 5-35 Configuring a Message-o f-the-Day Login Banner.
Contents viii Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Enabling and Disabling Public Secure Packet Forwarding 6-28 Configuring Protected Ports 6-29 Configur.
Contents ix Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 CHAPTER 8 Configuring Spanning Tree Protocol 8-1 Understanding Spanning Tre e Protocol 8-2 STP Overview .
Contents x Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Using Debug Messages 9-11 CHAPTER 10 Configuring Cipher Suites and WEP 10-1 Understanding Cipher Suites .
Contents xi Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Understanding Fast Se cure Roaming 12-3 Understanding Rad io Management 12-5 Understanding Layer 3 Mo bi.
Contents xii Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 CHAPTER 13 Configuring RADIUS and TACACS+ Servers 13-1 Configuring and Enabling RADIUS 13-2 Understand.
Contents xiii Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Using a RADIUS Server to Assign Users to VLANs 14-8 Using a RADIUS Server for Dynamic Mobility Group A.
Contents xiv Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 CHAPTER 17 Configuring CDP 17-1 Understanding CDP 17-2 Configuring CDP 17-2 Default CDP Configuration .
Contents xv Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Setting Up a Repe ater As a WPA Client 19-8 Understanding Ho t Standby 19-8 Configuring a Hot Standby Ac.
Contents xvi Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Preparing to Download or Upload a Con figuration File by Us ing FTP 20-13 Downloading a Configuration .
Contents xvii Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Setting a Logg ing Rate Limit 21-9 Configuring UNIX Syslog Servers 21-10 Logging Messages to a UNIX Sy.
Contents xviii Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 APPENDIX C Error and Event Messa ges C-1 Conventi ons C-2 Software Auto Upgrade Messages C-3 Association Managem ent Messages C-4 Unzip Messages C-5 802.
xix Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Preface Audience This guide is for the n etworking pr ofessional who installs and manages Ci sco Aironet Access Points.
xx Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Preface This guide also includes an ov erview of the acce ss point web-based i nterface (APWI), which contains all the functionality of th e command-line interface (CLI).
xxi Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Preface Chapter 15, “Configuring QoS, ” describes how to conf igure and mana ge MA C address, IP , and Ethertype filters on the access point using the web-bro wser interface.
xxii Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Preface Note Means reader take note. No tes contain helpful sugg es tions or references to materials not cont ained in this manual. Caution Means reader be careful.
xxiii Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Preface Related Publications These documents provide complete information about the access point: • Quick St.
xxiv Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Preface Obtaining Documentation, Obtaining Support, and Security Guidelines For info rmation on obtaining docu.
CH A P T E R 1-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 1 Overview Cisco Aironet Access PointsCisco wi reless de vices (hereafter called access points or .
1-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 1 Overvi ew Features Features This section lists features suppo rted on access pointW ireless devices runni ng Cisco IOS softw are. Note The proxy Mobile-IP feature i s not supported in Cisco I OS Releases 12.
1-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 1 Overview Features • U regulatory do main = W52 The upgrade utility allo ws users to migrate their 802.
1-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 1 Overvi ew Management Options Universal Workgroup Bridge This feature pro vides the means for Cisco access points con figured as workgroup br idges (WGBs) to associate with non-Cisco access points.
1-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 1 Overview Network Configuration Examp les Root Access Point An access point connected directly to a wired LAN provides a connection p oint for wireless users.
1-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 1 Overvi ew Network Configuratio n Examples Figure 1 -2 Access P oint as Repeater Bridges The 1200 and 1240 access point s and the 1300 access point/br idge can be config ured as root or non-root bridges.
1-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 1 Overview Network Configuration Examp les Figur e 1 -4 Access P oints as Root an d Non-r oot Bridg es .
1-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 1 Overvi ew Network Configuratio n Examples Central Unit in an All-Wireless Network In an all-wireless network, an access point acts as a stand-alone root unit.
CH A P T E R 2-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 2 Using the Web-Browser Interface This chapter describes the web-bro wser interface th at you can use to configure the wireless de vice. The details reg arding the conf iguration parameters are co ntained in the help system .
2-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 2 Using th e Web-Browser Interface Note A void using both the CLI an d the web-bro wser interf aces to configur e the wireless de vice.
2-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 2 Using the Web -Browser Interface Using the Web-Browse r Interface for the First Time Using the Web-Browser Interface for the First Time Use the wireless de vice’ s IP address to bro w se to the management system.
2-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 2 Using th e Web-Browser Interface Using the Manag ement Pages in the We b-Browser Interfac e Using Action Buttons Ta b l e 2 - 1 lists the page links and b uttons that appear on most management pages.
2-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 2 Using the Web -Browser Interface Enabling HTTPS for Secure Browsing Character Restrictions in Entry F.
2-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 2 Using th e Web-Browser Interface Enabling HTTPS for Secure Browsing Follo w these steps to create an FQDN and enable HTTPS: Step 1 If your bro wser uses popup-blocking software, disable th e popup-blocking feat ure.
2-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 2 Using the Web -Browser Interface Enabling HTTPS for Secure Browsing Figur e 2-3 Services – DNS P a ge Step 5 Select Enable for Domain Name System. Step 6 In the Domain Name f ield, enter your co mpany’ s domain name.
2-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 2 Using th e Web-Browser Interface Enabling HTTPS for Secure Browsing Step 10 Browse to the Services: HTTP W eb Server page.
2-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 2 Using the Web -Browser Interface Enabling HTTPS for Secure Browsing Step 14 Another warning w indow appears stati ng that the acce ss point’ s security certificate is v alid but is not from a kno wn source.
2-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 2 Using th e Web-Browser Interface Enabling HTTPS for Secure Browsing Figur e 2-7 Certificat e Window Step 16 On the Certificate wi ndow , click Install Cer tificate .
2-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 2 Using the Web -Browser Interface Enabling HTTPS for Secure Browsing Figur e 2-8 Certificat e Import Wizar d Window Step 17 Click Next . The next windo w asks where you want to store the certif icate.
2-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 2 Using th e Web-Browser Interface Enabling HTTPS for Secure Browsing Figur e 2-1 0 Certificat e Completion Window Step 19 Click Finis h . W indows displays a f inal security warning.
2-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 2 Using the Web -Browser Interface Enabling HTTPS for Secure Browsing Figure 2-12 Import Successful Windo w Step 21 Click OK . Step 22 On the Certificate windo w shown in Figure 2-7 , which is still displayed, click OK .
2-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 2 Using th e Web-Browser Interface Using Online Help Using Online Help Click the help icon at the top of an y page in the web-br owser interface to d isplay online help.
2-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 2 Using the Web -Browser Interface Disabling the Web- Browser Interface Ta b l e 2 - 2 shows an example help l ocation and Help Root URL for an 11 00 series access point.
2-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 2 Using th e Web-Browser Interface Disabling the Web-Browser Inter face.
CH A P T E R 3-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 3 Using the Command-Line Interface This chapter describes the Cisco IOS command-line interface (CLI) that you can use to configure the wireless de vice.
3-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 3 Using the Comman d-Line Interface Cisco IOS Command Modes Cisco IOS Command Modes The Cisco IOS user interface is di vided into many dif ferent modes. The commands av ailable to you depend on which mode y ou are currently in.
3-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 3 Using th e Comma nd-Line Interface Getting Help Getting Help Y ou can ente r a question mark (?) at the system prompt to display a list of commands a vailable for each command mo de.
3-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 3 Using the Comman d-Line Interface Using no and default Forms of Commands Using no and default Forms of Commands Most confi guration commands al so hav e a no form.
3-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 3 Using th e Comma nd-Line Interface Using Comman d History Changing the Command History Buffer Size By default, the wi reless de vice records ten command lines in its history buf fer .
3-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 3 Using the Comman d-Line Interface Using Editing Featu res Using Editing Features This section descri bes the editing features that can help you manipu late the command line.
3-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 3 Using th e Comma nd-Line Interface Using Editing Feature s Editing Command Lines that Wrap Y ou can use a wraparound feature for comman ds that ext end beyond a single li ne on the screen.
3-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 3 Using the Comman d-Line Interface Searching and Filtering Output of show and more Commands In this e xample, the access-list global conf iguration command entry ex tends beyo nd one line.
3-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 3 Using th e Comma nd-Line Interface Accessing the CLI Accessing the CLI Y ou can open the w ireless device’ s C LI using T elnet or Secure Shell (SSH).
3-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 3 Using the Comman d-Line Interface Accessing the CLI.
CH A P T E R 4-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 4 Configuring the Access Point for the First Time This chapter describe s how to configure basic settin gs on the wireless de vice for the f irst time.
4-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Before You Start Before You Start Before you install.
4-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Before You Start Step 4 Enter the wireless de vice password in the Passw ord field and press Enter . The default passwo rd is Cisco .
4-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Obtaining and Assign ing an IP Address Obtaining and.
4-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Connecting to the 1100 Series A ccess Point Locally The 1300 series access point/br idge assumes a radio netw ork role of a root access point .
4-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Connecting to the 1130 Series Access Point Locally C.
4-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Connecting to the 1300 Series Access Point/Bridge Locally Note When your confi guration change s a re completed, you must remo ve the serial cab le from the access point.
4-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Default Radio Settings Default Radio Settings Beginning with Cisco IOS Release 12.3(8)J A, access po int radios are disabled and no default SSID is assigned.
4-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Assigning Basic Settings Figure 4-1 Summary Status P age Step 5 Click Express Set up . The Express Setup screen appears.
4-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Assigning Basic Settings Figur e 4-2 Expr ess Setup.
4-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Assigning Basic Settings Figur e 4-3 Expr ess Setup P age fo r 1 130, 1200 , and 1240 Ser ies Access P oints Note Figure 4-3 sho ws the Express Setup page for an 1130 series access point.
4-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Assigning Basic Settings Figur e 4-4 Expr ess Setup P age f or the 1300 Series A ccess Point/Br idge Step 6 Enter the conf iguration settings you obtained from you r system administ rator .
4-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Assigning Basic Settings • IP Address —Use thi s setting to assign or change t h e wireless device’ s IP address.
4-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Assigning Basic Settings – Custom —The wireless device uses the settings you enter on the Network Interfaces: Radio-802.
4-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Configuring Basic Security Setting s Configuring Ba.
4-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring Basi c Security Settings Figur e 4-5 Ex.
4-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Configuring Basic Security Setting s The Express Security page helps you conf igure basic security settin gs.
4-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring Basi c Security Settings Understanding Express Security Settings The SSIDs that you create using the Express security page appear in the SSID ta ble at the bottom of the page.
4-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Configuring Basic Security Setting s Express Security Types Ta b l e 4 - 2 describes the four security types that yo u can assign to an SSID.
4-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring Basi c Security Settings EAP Authentication This option en ables 802.1X authentication (such as LEA P , PEAP , EAP-TLS, EAP-F AST , EAP-TTLS, EAP-GTC, EAP-SIM, and other 802.
4-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Configuring Basic Security Setting s Express Securi.
4-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring Basi c Security Settings CLI Configurat.
4-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Configuring Basic Security Setting s Example: Stati.
4-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring Basi c Security Settings bridge-group 2.
4-25 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Configuring Basic Security Setting s bridge-group 1.
4-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring Basi c Security Settings aaa new-model ! ! aaa group server radius rad_eap server 10.91.104.
4-27 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Configuring System Power Setting s for 1130 and 1240 Series Access Points bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled ! interface FastEthernet0.
4-28 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Using the IP Setup Utility Using a Power Injector I.
4-29 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Assigning an IP Address Using the CLI Figur e 4-7 IPSU Get IP A ddress Scr een Step 2 When the utility wind ow op ens, make sur e the Get IP addr radio b utton in the Function box is selected.
4-30 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Using a Telnet Session to Access the CLI Using a Telnet Session to Access the CLI Follo w these steps to access the CLI by using a T elnet session.
4-31 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Configuring the 802.1X Supplicant Y ou can complete the phases in any order , but the y must be completed before the supplicant b ecomes operational.
4-32 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring the 802.
4-33 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 4 Configuring th e Access Point for the First Time Configuring the 802.1X Supplicant The follo wing example applys the credentials profile test to the ssid testap1 on a repeater access point.
4-34 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring the 802.
CH A P T E R 5-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 5 Administering the Access PointWireless Device Access This chapter de scribes ho w to administer the wirele ss de vice.
5-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Disabling the Mode Button Disabling the Mode Button Y ou can disable the mode b utton on access points ha ving a console port b y using the [no] boot mode-button co mmand.
5-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Preventing Unauthorized Access to Your Access .
5-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Protecting Access to Privileged EXEC Commands Default Password and Privilege Level Configuration Ta b l e 5 - 1 shows the def ault password and pri vile ge lev e l conf iguration.
5-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Protecting A ccess to Privileged EXEC Commands This example sho ws how to ch ange the enable password to l1u2c3k4y5 .
5-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Protecting Access to Privileged EXEC Commands .
5-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Protecting A ccess to Privileged EXEC Commands If both the enable and enable secret passwords are defined, users must enter the enable secret password.
5-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Protecting Access to Privileged EXEC Commands T o disable userna me authenticatio n for a specific user, use the no user name name global configuration command.
5-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Controlling Access Point Access with RADIUS When you set a command to a privilege le vel, all commands whose syntax is a subset of that command are also set to that le vel.
5-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Controlling Access Po int Access with RADIUS RADIUS provid es detailed accounting infor mation and fle xible administrati ve control o ver authentication and authorization processes.
5-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Controlling Access Point Access with RADIUS T o disable AAA, use the no aaa new-model global conf iguration command.
5-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Controlling Access Po int Access with RADIUS Defining AAA Server Groups Y ou can configure the wireless de vice to use AAA server g roups to group e xisting server h osts for authentication.
5-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Controlling Access Point Access with RADIUS S.
5-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Controlling Access Po int Access with RADIUS T o remove the specified RADIUS server , use the no radius-server host hostname | ip-addr ess global confi guration command.
5-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Controlling Access Po int Access with TACACS+ T o disable authorization, use the no aaa authorizat ion { network | exec } method1 global configuration command.
5-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Controlling Access Po int Access with TACACS+ authentication met hods are performed. The only e xception is the default method li st (which, b y coincidence, is named default ).
5-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Controlling Access Po int Access with TACACS+ T o disable AAA, use the no aaa new-model global conf iguration command.
5-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Configuring Ethernet Speed and Duplex Settings Configuring Ethernet Speed and Duplex Settings Y ou ca n assign the wireless device Ethernet port speed and duplex setting s.
5-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Configu ring the Access Po int for L ocal Aut.
5-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Configuring the Authen tication Cache and Profile T o disable AAA, use the no aaa new-model global conf iguration command.
5-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Configuring the Authen tication Cache and Profile ! aaa group server tacacs+ tac_admin server 192.
5-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Configuring the Access Po int to Provide DHCP Service ! ip http server ip http authentication aaa no ip http secure-server ip http help-path http://www.
5-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Configuring the Access Point to Pr ovide DHCP Service Note When you configure the access point as a DHCP server , it assigns IP addresses to de vices on its subnet.
5-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Configuring the Access Po int to Provide DHCP Service Use the no form of these commands to return to def ault settings.
5-25 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Configuring th e Access Point for Secure Sh ell Clear Commands In pri vileged Exec mode, use the commands in Ta b l e 5 - 3 to clear DHCP server v aria bles.
5-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Configuring Client ARP Caching Note The SSH feature in this software releas e does not suppor t IP Security (IPSec).
5-27 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Managing the System Time and Date Configuring.
5-28 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Managing the System T ime and Date http://www .cisco.com/en/US/ tech/tk648/tk362/ technologies_tech_note09186a0080a23d02 .
5-29 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Managing the System Time and Date Beginning in privileged EXEC mode, follow these steps to set th e system clock: This exampl e show s how to manually set the system clock to 1: 32 p.
5-30 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Managing the System T ime and Date The minute.
5-31 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Managing the System Time and Date The first part of the clock summer -time global conf iguration command specifies when su mmer time begins, and the second part specif ies when it ends.
5-32 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Defining HTTP Acc ess Defining HTTP Access By default, 80 is used fo r HTTP access, and port 443 is used for HTTPS access.
5-33 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Configuring a System Name and Prompt When you set the system name, it is also used as the system prompt.
5-34 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Configuring a System Name a nd Prompt Setting.
5-35 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Creating a Banner T o remov e a domain name, use the no ip domain-name name global configuration command.
5-36 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Creating a Ban ner Beginni ng in pri vileged .
5-37 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Upgrading Autonomo us Cisco Airone t Access Points to Lightweight Mode Configuring a Login Banner Y ou can configur e a login banner to appear on al l c onnected terminals.
5-38 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Migrating to Japan W52 Domain The following interface global conf iguration mode CLI command is us ed to migrate an access point 802.
5-39 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 5 Administering t he Access PointWire less Device Access Configuring Multiple VLAN and Rate Limiting f.
5-40 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 5 Administe ring the Access PointWire less Device Access Configuring Multiple VLAN and Rate Limiting f.
CH A P T E R 6-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 6 Configuring Radio Settings This chapter descri bes how to configure radio settin gs for the wireless de vice.
6-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Enabling the Radio Interface Enabling the Radio Interface The wireless de vice radios are disabled b y default. Note In Cisco IOS Release 12.
6-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring the Ro le in Radio Netw ork Y ou can a lso configure a fallback role for root access points.
6-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring the Role in Radio Network Step 3 station-role non-root {bridge.
6-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring D ual-Radio Fallback Note When you enable the role in the radi.
6-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring Du al-Radio Fallb ack Note This feature is supported b y the dual-radio access poi nts such as AP1240, AP1230, and AP 1130.
6-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuri ng Radio Data R ates Bridge Features Not Supported The follo win.
6-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring Radio Data Rates to be made based on reso urces av ailable to the wirele ss project, type of traf fic th e users will be passing, service le vel desired, an d as always, the quality of the RF en vironment.
6-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuri ng Radio Data R ates Step 3 speed These option s are a v ailable for th e 802.11b, 2.4-GHz radio: {[ 1.0 ] [ 11.0 ] [ 2.
6-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring Radio Tr ansmit Power Use the no form of the speed command to remov e one or more data rates from the conf iguration.
6-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring Ra dio Transmit Power Beginni ng in privile ged EXEC mode, fo.
6-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring Radio Tr ansmit Power Limiting the Power Level for Associated Client Devices Y ou can also limit the po wer le vel on client de vices that associate to the wireless de vice.
6-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring Radio Channel Settings Configuring Radio Channel Settings The.
6-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring Ra dio Channel Settings Ta b l e 6 - 3 shows the a v ailable channe ls and frequencies for the IEEE 802.11b 2.4-GHz radio.
6-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring Radio Channel Settings T able 6-4 Channels and A v ailable F r equencies f or IEEE 802.1 1g 2.4 GHz Radio Ta b l e 6 - 5 shows the a vailable channels an d frequencies for the RM20A IEEE 802.
6-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring Ra dio Channel Settings Ta b l e 6 - 6 shows the a vailable freque ncies for the RM21A and RM22A IEEE 802.11a 5-GHz radios.
6-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring Radio Channel Settings Dynamic Frequency Selection Access poi.
6-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring Ra dio Channel Settings Prior to transmitt ing on any channels listed in Ta b l e 6 - 7 , the access point radio performs a Channel A vailability Check (CA C).
6-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring Radio Channel Settings Uniform Spreading Required: Yes Curren.
6-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring Ra dio Channel Settings Blocking Channels from DFS Selection .
6-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring Location-Ba sed Services Configuring Location-Based Services This section descri bes how to conf igure location-ba sed services using the access point CLI.
6-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Enabling and Disa bling World Mo de In this e xample, the prof ile southside is enabled on the access point’ s 802.11g radio: ap# configure terminal ap(config)# dot11 lbs southside ap(dot11-lbs)# server-address 10.
6-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Disabling and Enabling Short Radio Preambles network there. Cisco cl ient devices running firmware ve rsion 5.30.17 or later detect whether the wireless de vice is using 802.
6-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring Tr ansm it and Receive Antenna s • Long—A long pream ble ensures compatibility b etw een the wireless device and all early models of Cisco Aironet W ireless LAN Adapters (PC4800 an d PC4800A).
6-25 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Enabling and D isabling Gratuitous Probe Re sponse Enabling and Disabling.
6-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Disabling and Enabling Airon et Extensions The optional parameters can be.
6-27 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring the Ethernet Enc apsulation Transformation Method Use the dot11 extension aironet command to enable Aironet e xtensions if they are disabled.
6-28 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Enabling and Disabli ng Public Secure Packet Forwardin g whether multicas.
6-29 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Enabling and Disabling Pu blic Secure Packet Forwa rding PSPF is disabled b y default. Be ginning in privil e ged EXEC mode, follo w th ese steps to enable PSPF: Use the no form of the command to disable PSPF .
6-30 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring the Be acon Period and the DTIM For detai led information on .
6-31 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Configuring the Maximum Data Retries Use the no form of the command to reset the R TS settings to defaults.
6-32 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Enabling Short Slot Time for 802.11g Radios Use the no form of the command to reset the setting t o defaults. Enabling Short Slot Time for 802.
6-33 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Viewing VoWLAN Metrics The Stream page appears.
6-34 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Viewing VoWLAN Metrics Viewing Voice Reports Y ou ca n use a browser to access voice reports listing V oWLAN me trics stored on a WLSE.
6-35 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Viewing VoWLAN Metrics • T o view a graph of v oice bandwidth in use during the last h our , choose Bandwidth In Use (% Allowed) from the Report Name drop-down menu.
6-36 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Viewing VoWLAN Metrics Figur e 6-6 V oice Streaming Pr ogress Viewing Wireless Client Reports In addition to vie wing voice reports from an access point perspective, you can vie w them from a client perspective.
6-37 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Viewing VoWLAN Metrics Figure 6-7 Wir eless Client Metr ics Viewing Voice.
6-38 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Viewing VoWLAN Metrics Figur e 6-8 V oice F ault Summary Configuring Voic.
6-39 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 6 Configuring Radio Settings Viewing VoWLAN Metrics T o view a summary of v oice faults, follo w these steps: Step 1 Log in to a WLSE. Step 2 Click the Fau l t s tab.
6-40 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 6 Configuring Radio Settings Viewing VoWLAN Metrics Figure 6-1 0 F ault Settings.
CH A P T E R 7-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 7 Configuring Multiple SSIDs This chapter describe s how to configure and manage multiple service set identif iers (SSIDs) on the access point.
7-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 7 Config uring Multipl e SSIDs Understanding Multiple SSIDs Understanding Multiple SSIDs The SSID is a unique identif ier that wireless networ ki ng devices use to esta blish and maintain wireless connectivity .
7-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 7 Configuring Multiple SSIDs Understanding Multiple SSI Ds Cisco IOS Release 12.3(7)J A supports confi guration of SSID parameters at the interface le vel on the CLI, but t he SSIDs are stored in global mode.
7-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 7 Config uring Multipl e SSIDs Configuring Multiple SSIDs Configuring Multiple SSIDs These sections con.
7-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 7 Configuring Multiple SSIDs Configuring Multiple SSIDs Note Y ou use the ssid command’ s authentication optio ns to conf igure an authenticatio n type for each SSID.
7-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 7 Config uring Multipl e SSIDs Configuring Multiple SSIDs Note When you enable guest SSID mode for the 802.11 g radio it applies to the 802.11 b radio as well since 802.
7-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 7 Configuring Multiple SSIDs Configuring Multiple Basic SSIDs SSID [buffalo ] : SSID [buffalo ] : Note This command sho ws only th e fi rst 15 characters of the SSID.
7-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 7 Config uring Multipl e SSIDs Configuring Multiple Basic SSIDs Note Dev ices on your wir eless LAN tha.
7-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 7 Configuring Multiple SSIDs Configuring Multiple Basic SSIDs Figure 7 -1 Global SSID Manager P age Step 2 Enter the SSID name in the SSID fie l d . Step 3 Use the VLAN drop-do wn menu to select the VLAN to wh ich the SSID is assigned.
7-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 7 Config uring Multipl e SSIDs Configuring Multiple Basic SSIDs Step 7 (Optiona l) In the Mul tiple BSSI D B eacon Settings section, select the Set SSID as Guest Mode check box to include the SSID in beacons.
7-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 7 Configuring Multiple SSIDs Assigning IP Redirection for a n SSID Assigning IP Redirection for an SSI.
7-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 7 Config uring Multipl e SSIDs Assigning IP Redirection for an SSID Guidelines for Using IP Redirectio.
7-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 7 Configuring Multiple SSIDs Including an SSID in an SSIDL IE Including an SSID in an SSIDL IE The access point beacon can adv e rtise only one broadcast SSID.
7-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 7 Config uring Multipl e SSIDs NAC Support for MBSSID A client, based on its health (softw are version.
7-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 7 Configuring Multiple SSIDs NAC Support for MBSSID Configuring NAC for MBSSID Note This feature supports only Layer 2 mobility within VLANs. Layer 3 mobili ty using network ID is not supported in this feature.
7-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 7 Config uring Multipl e SSIDs NAC Support for MBSSID authentication open authentication network-eap e.
CH A P T E R 8-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 8 Configuring Spanning Tree Protocol This chapter descibes how to conf i gure Spanning T ree Protocol (STP) on your access point.
8-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 8 Configur ing Spanning Tree Protocol Understanding Spanning Tree Protocol Understanding Spanning Tree Protocol This section describes ho w spanning-tree features work.
8-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 8 Configuring Spanning T ree Protocol Understanding Spanning Tree Protocol The access point maintains a separate spanning-tree instance for each acti ve VL AN configured on it.
8-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 8 Configur ing Spanning Tree Protocol Understanding Spanning Tree Protocol When a access point receiv e.
8-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 8 Configuring Spanning T ree Protocol Understanding Spanning Tree Protocol Spanning-Tree Timers Ta b l e 8 - 1 describes the timers that af fect the entire spanning-tree performance.
8-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 8 Configur ing Spanning Tree Protocol Understanding Spanning Tree Protocol it can create temporary data loo ps. Interfaces mu st wait for ne w topology information to propagate through the LAN before startin g to forward frames.
8-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 8 Configuring Spanning T ree Protocol Understanding Spanning Tree Protocol 2. While spanning tree w aits the forw ard-delay timer to e xpire, it moves the i nterface to the learn ing state and resets the forwar d-delay timer .
8-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 8 Configur ing Spanning Tree Protocol Configuring STP Featur es Forwarding State An interface in the forwar ding state forwards frames . The interface enters the fo rwarding sta te from the learning state.
8-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 8 Configuring Spanning T ree Protocol Configuring STP Features The radio and Ethernet interfaces and the nati ve VL AN on the access point are assigned to bridge gr oup 1 by def ault.
8-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 8 Configur ing Spanning Tree Protocol Configuring STP Featur es STP Configuration Examples These confi.
8-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 8 Configuring Spanning T ree Protocol Configuring STP Features end Non-Root Bridge Without VLANs This .
8-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 8 Configur ing Spanning Tree Protocol Configuring STP Featur es ip ssh authentication-retries 3 ! bridge irb ! interface Dot11Radio0 no ip address no ip route-cache ! ssid vlan1 vlan 1 infrastructure-ssid authentication open ! speed basic-6.
8-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 8 Configuring Spanning T ree Protocol Configuring STP Features bridge 1 route ip bridge 1 priority 900.
8-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 8 Configur ing Spanning Tree Protocol Displaying Spanning-Tr ee Status speed auto ! interface FastEthernet0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 ! interface FastEthernet0.
8-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 8 Configuring Spanning T ree Protocol Displaying Spanning-Tre e Status.
8-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 8 Configur ing Spanning Tree Protocol Displaying Spanning-Tr ee Status.
CH A P T E R 9-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 9 Configuring an Access Point as a Local Authenticator This chapter describes how to config ure th.
9-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 9 Co nfiguring an Ac cess Point as a Local Authenticator Understanding Local Authentication Understanding Local Authentication Many smal l wireless LANs that could be made more secure with 802.
9-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 9 Configuring an Access Point as a Local Authenticator Configuring a Local Au thenticator Guidelines fo.
9-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 9 Co nfiguring an Ac cess Point as a Local Authenticator Configuring a Lo cal Authenticator Step 3 radius-server local Enable the access point as a local authenticator and enter conf iguration mode for the authen ticator .
9-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 9 Configuring an Access Point as a Local Authenticator Configuring a Local Au thenticator This example .
9-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 9 Co nfiguring an Ac cess Point as a Local Authenticator Configuring a Lo cal Authenticator AP(config-r.
9-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 9 Configuring an Access Point as a Local Authenticator Configuring a Local Au thenticator Each time the access point t ries to use the main serv ers while they are do wn, th e client device trying to authenticate might repor t an authentication timeout.
9-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 9 Co nfiguring an Ac cess Point as a Local Authenticator Configuring a Lo cal Authenticator In this exa.
9-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 9 Configuring an Access Point as a Local Authenticator Configuring a Local Au thenticator Limiting the .
9-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 9 Co nfiguring an Ac cess Point as a Local Authenticator Configuring a Lo cal Authenticator Username S.
9-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 9 Configuring an Access Point as a Local Authenticator Configuring a Local Au thenticator Using Debug .
9-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 9 Co nfiguring an Ac cess Point as a Local Authenticator Configuring a Lo cal Authenticator.
CH A P T E R 10-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 10 Configuring Cipher Suites and WEP This chapter describes ho w to conf igure the cipher su ites.
10-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 10 Configurin g Cipher Suites and WEP Understanding Cipher Suites and WEP Understanding Cipher Suites and WEP This section descri bes how WEP and cipher suites protect t raff ic on your wireless LAN.
10-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 10 Configuring Cipher Suites and WEP Configuring Ciph er Suites and WEP • TKIP (T emporal Ke y Integ.
10-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 10 Configurin g Cipher Suites and WEP Configuring Cipher Suites a nd WEP Beginni ng in pri vile ged EX.
10-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 10 Configuring Cipher Suites and WEP Configuring Ciph er Suites and WEP WEP Key Restrictions T able 10-1 lists WEP key restrictions based on you r security configuration.
10-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 10 Configurin g Cipher Suites and WEP Configuring Cipher Suites a nd WEP Note If you enable MIC but yo.
10-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 10 Configuring Cipher Suites and WEP Configuring Ciph er Suites and WEP Use the no form of the encryption command to disable a cipher suite.
10-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 10 Configurin g Cipher Suites and WEP Configuring Cipher Suites a nd WEP Beginni ng in pri vileged EXEC mode, foll ow th ese steps to enable broadcast k ey rotation: Use the no form of the encryption command to disable b roadcast key rot ation.
CH A P T E R 11-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 11 Configuring Authentication Types This chapter descri bes how to configure authentica tion types on the access pointwireless device.
11-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 11 Configurin g Authentication Types Understanding Authentication Types Understanding Authentication Types This section describes the authentication types that you can co nfigure on the access point.
11-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 11 Configuring Authentication Types Understanding Authentication Types Figur e 1 1 -1 Sequence for Open A uthent ication Shared Key Authentication to the Access Point Cisco provides shared k ey authenti cat ion to comply with the IEEE 802.
11-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 11 Configurin g Authentication Types Understanding Authentication Types EAP Authentication to the Network This authentication t ype provides t he highest lev el of security for your wireless networ k.
11-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 11 Configuring Authentication Types Understanding Authentication Types There is more than one typ e of.
11-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 11 Configurin g Authentication Types Understanding Authentication Types Figur e 1 1 -4 Sequence f or M.
11-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 11 Configuring Authentication Types Understanding Authentication Types Figure 11-5 sho ws the reassociation proce ss using CCKM.
11-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 11 Configurin g Authentication Types Understanding Authentication Types Figure 11-6 sh ows the WP A key management process.
11-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 11 Configuring Authentication Types Understanding Authentication Types T o support the secur ity combi.
11-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 11 Configurin g Authentication Types Configuring Au thentication Types Note When you configure TKIP -.
11-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 11 Configuring Authentication Types Configuring Aut hentication Types Step 3 authentication open [ mac-address list -name [ alter nate ]] [[ optional ] eap list-name ] (Optional) Set the authenticati on type to open for this SSID.
11-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 11 Configurin g Authentication Types Configuring Au thentication Types Step 5 authentication network-eap list-name [ mac-address list -name ] (Optional) Set the authenticati on type for the SSID to Network-EAP .
11-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 11 Configuring Authentication Types Configuring Aut hentication Types Use the no form of the SSID commands to disable th e SSID or to disable SSID features.
11-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 11 Configurin g Authentication Types Configuring Au thentication Types Configuring Additional WPA Settings Use two opti onal settings to conf ig ure a pre-shared key on the access point and adjust t he frequency o f group k ey updat es.
11-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 11 Configuring Authentication Types Configuring Aut hentication Types This exampl e show s how to con.
11-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 11 Configurin g Authentication Types Configuring Au thentication Types Use the no form of the dot11 aaa mac-authen f ilter-cache command t o disable MA C authentication caching.
11-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 11 Configuring Authentication Types Configuring Aut hentication Types Use the no form of these commands to reset the v alues to default settings. Creating and Applying EAP Method Pr ofiles for the 802.
11-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 11 Configurin g Authentication Types Configuring Au thentication Types Creating an EAP Method Profile.
11-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 11 Configuring Authentication Types Matching Access Point and Clie nt Device Authentication Type s Applying an EAP Prof ile to an Uplink SSID This operation typical ly applies to repeater access points.
11-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 11 Configurin g Authentication Types Matching Access Point a nd Client Device Au thentication Types L.
11-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 11 Configuring Authentication Types Matching Access Point and Clie nt Device Authentication Type s 802.
11-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 11 Configurin g Authentication Types Matching Access Point a nd Client Device Au thentication Types P.
CH A P T E R 12-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection Servi.
12-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Unders.
12-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services .
12-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Unders.
12-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services Understanding Radio Mana gement device.
12-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Unders.
12-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services Configuring WDS access points.
12-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Config.
12-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services Configuring WDS Figure 12-4 sho ws the required configuration for each de vice that pa rticipates in WDS.
12-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Confi.
12-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services.
12-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Configuring WDS Figur e 12-7 WDS Server Gr oups P age Step 10 Create a group of serv ers to be used for 802.
12-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services Configuring WDS Step 14 Config ure the list of serv ers to be used for 802.
12-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Confi.
12-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services.
12-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Configuring WDS Figur e 12-9 Netw or k Configuration P age Step 2 Click Add Entry unde r the AAA C lients tabl e.
12-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services Configuring WDS Figure 12-1 0 Add AAA Client P a ge Step 3 In the AAA Client Hostname f ield, enter the name of the WDS de vice.
12-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Configuring WDS Figure 12-1 1 User Setup P age Step 10 Enter the name of the access point in the User field.
12-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services Configuring WDS Figure 12-12 A CS User Setup Bo x Step 13 Select CiscoSecure Database from the P assword Authenti cation drop-do w n menu.
12-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Configuring WDS Step 17 Browse to the System Co nfiguration page , click Service Control , and restart A CS to apply your entries.
12-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services.
12-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Confi.
12-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services.
12-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Configuring Fast Secu re Roaming Figure 12-15 Global SSID Ma nager P age Step 6 On the SSID that suppor ts CCKM, select these settings: b.
12-25 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services Configuring Management Fra me Protection d. Select Mandatory or Optional under Authenticate d Ke y Manage ment.
12-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Management Frame Protection Infrastructure MFP provides Inf rastr ucture support.
12-27 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services Management Frame Protection Client MFP can be configured as either requi red or optional for a particular SSID.
12-28 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Manag.
12-29 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services.
12-30 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Configuring Radio Management Figure 12-1 7 WDS/WNM General Set up P age Step 4 Check the Configur e W ireless Network Manager check box.
12-31 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services.
12-32 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Confi.
12-33 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intr usion Detection Services Configuring WLSM Failover Configuring Monitor Mode Limits Y ou can configure threshold values that the access po int uses in monitor mode .
12-34 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Configuring WLSM Failover tunnels, which k eeps data traf fic go ing between client and SUP .
CH A P T E R 13-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 13 Configuring RADIUS and TACACS+ Servers This chapter describes ho w to enable and configur e th.
13-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 13 Config uring RADIUS a nd TACACS+ Servers Configuring and En abling RADIUS Configuring and Enabling RADIUS This section descri bes how to conf igure and en able RADI US.
13-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 13 Configuring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS RADIUS Operation When a wir.
13-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 13 Config uring RADIUS a nd TACACS+ Servers Configuring and En abling RADIUS Configuring RADIUS This section d escribes ho w to conf igure yo ur access point to su pport RADIUS.
13-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 13 Configuring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS Identifying the RADIUS Serv.
13-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 13 Config uring RADIUS a nd TACACS+ Servers Configuring and En abling RADIUS Command Purpose Step 1 configur e terminal Enter global conf iguration mode.
13-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 13 Configuring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS T o remove the specified RADIUS server , use the no radius-server host hostname | ip-addr ess global confi guration command.
13-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 13 Config uring RADIUS a nd TACACS+ Servers Configuring and En abling RADIUS authenticate users; if t hat method fails to respond , the software selects the ne xt authentication method in the method list.
13-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 13 Configuring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS T o disable AAA, use the no aaa new-model global conf iguration command.
13-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 13 Config uring RADIUS a nd TACACS+ Servers Configuring and En abling RADIUS Step 3 radius-server hos.
13-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 13 Configuring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS T o remove the specified RADIUS server , use the no radius-server host hostname | ip-addr ess global confi guration command.
13-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 13 Config uring RADIUS a nd TACACS+ Servers Configuring and En abling RADIUS Beginni ng in pri vilege.
13-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 13 Configuring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS Note When WDS is configured, PoD requ ests should be directed to the WDS.
13-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 13 Config uring RADIUS a nd TACACS+ Servers Configuring and En abling RADIUS T o disable accounting, use t he no aaa accounting { network | exec } { start-stop } method 1.
13-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 13 Configuring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS Configuring Settings fo r .
13-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 13 Config uring RADIUS a nd TACACS+ Servers Configuring and En abling RADIUS This ex ample sho ws ho .
13-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 13 Configuring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS For a complete list of RAD.
13-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 13 Config uring RADIUS a nd TACACS+ Servers Configuring and En abling RADIUS T o delete the vendor -proprietary RADIUS host, use the no radius-server host { hostname | ip-addr ess } non-standard global conf iguration command.
13-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 13 Configuring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS Beginning in priv ileged E.
13-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 13 Config uring RADIUS a nd TACACS+ Servers Configuring and En abling RADIUS RADIUS Attributes Sent b.
13-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 13 Configuring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS T able 13-4 Attr ibutes Se.
13-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 13 Config uring RADIUS a nd TACACS+ Servers Configuring and En abling RADIUS Note By default, the access point sends reauthentication requests to the authentication serv er with the service-type attrib ute set to authenticate -only .
13-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 13 Configuring RADIUS and TACACS+ Servers Configuring and Enabling T ACACS+ Configuring and Enabling .
13-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 13 Config uring RADIUS a nd TACACS+ Servers Configuring and Enablin g TACACS+ TACACS+ Operation When an administrator attempts a simple ASCII login by authenti cating to an access point using T A CA CS+, this process occurs: 1.
13-25 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 13 Configuring RADIUS and TACACS+ Servers Configuring and Enabling T ACACS+ This section contains thi.
13-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 13 Config uring RADIUS a nd TACACS+ Servers Configuring and Enablin g TACACS+ T o remove the specif ied T A CA CS+ server name or address, use the no tacacs-s erver host hostname global conf iguration command.
13-27 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 13 Configuring RADIUS and TACACS+ Servers Configuring and Enabling T ACACS+ T o disable AAA, use the no aaa new-model global conf iguration command.
13-28 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 13 Config uring RADIUS a nd TACACS+ Servers Configuring and Enablin g TACACS+ The aaa authoriza tion .
13-29 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 13 Configuring RADIUS and TACACS+ Servers Configuring and Enabling T ACACS+ T o disable accounting, use t he no aaa accounting { network | exec } { start-stop } method1.
13-30 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 13 Config uring RADIUS a nd TACACS+ Servers Configuring and Enablin g TACACS+.
CH A P T E R 14-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 14 Configuring VLANs This chapter describes how to configure your access point to operate with the VLANs set up on your wired LAN in the follo wing sections:.
14-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 14 Configuring VLA Ns Understanding VLANs Understanding VLANs A VLAN is a swit ched network t hat is logically segmented, b y functions, pro ject teams, or applications rather than on a physical or geographical basis.
14-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 14 Configuring VLANs Understanding VLANs Figur e 14-1 LAN and VLAN Segmentation with Wir eless Devices.
14-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 14 Configuring VLA Ns Configuring VLANs Incorporating Wireless Devices into VLANs The basic wireless componen ts of a VLAN consist of an access point and a client associated to it using wireless technology .
14-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 14 Configuring VLANs Configuri ng VLANs Configuring a VLAN Note When you confi gure VLANs on access points, th e Na ti ve VLAN must be V LAN1.
14-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 14 Configuring VLA Ns Configuring VLANs Step 3 ssid ssid-string Create an SSID and enter SSID configuration mode for the new SSID. The SSID can consist of up t o 32 alphanumeric characters.
14-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 14 Configuring VLANs Configuri ng VLANs This example sho ws how to: • Name an SSID • Assign the SS.
14-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 14 Configuring VLA Ns Configuring VLANs Creating a VLAN Name Beginning in priv ileged EXEC mode, foll ow these steps to assign a name to a VLAN: Use the no form of the command to remov e the name from the VLAN.
14-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 14 Configuring VLANs Configuri ng VLANs Using a RADIUS Server for Dynamic Mobility Group Assignment Y ou can configure a RADIUS server to dynamic ally assi gn mobility gro ups to users or user gr oups.
14-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 14 Configuring VLA Ns VLAN Configuratio n Example Virtual-Dot11Radio0 Protocols Configured: Address: Received: Transmitted: Bridging Bridge Group 1 201688 0 Bridging Bridge Group 1 201688 0 Bridging Bridge Group 1 201688 0 Virtual LAN ID: 2 (IEEE 802.
14-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 14 Configuring VLANs VLAN Configuratio n Example 4. Configure VLAN 1, the Management VLAN, on both the fastEthernet and do t11radio interfaces on the access point.
14-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 14 Configuring VLA Ns VLAN Configuratio n Example T able 14-3 sho w s the results of the con figur ation commands in T able 14-2 . Use the show running command to display th e running conf igurati on on the access point.
14-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 14 Configuring VLANs VLAN Configuratio n Example.
14-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 14 Configuring VLA Ns VLAN Configuratio n Example.
CH A P T E R 15-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 15 Configuring QoS This chapter describes how to conf igure quality of se rvice (QoS) on your access point. W ith this feature, you can provide preferential treatment to certain traff i c at the expense of others.
15-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 15 Configuring QoS Understanding Qo S for Wireless LANs Understanding QoS for Wireless LANs T ypically.
15-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 15 Configuring QoS Understanding QoS for Wireless LANs QoS on the wireless LAN focuses on do wnstream prioritization from the access point. Figur e 15-1 sho ws the upstream and downstream traf fic flo w .
15-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 15 Configuring QoS Understanding Qo S for Wireless LANs Note This release continues to support e xisting 7920 wireless ph one fi rmware. Do not attempt to use the ne w standard (IEEE 802.
15-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 15 Configuring QoS Configuri ng QoS Configuring QoS QoS is disabled by def ault (ho wev er , the radio interface always honors tagged 802.1P packets e ven when you have not configured a QoS policy).
15-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 15 Configuring QoS Configuring QoS Figur e 15-2 QoS P olicies Pag e Step 3 Wi t h <NEW> selected in the Create/Edit Po licy f ield, ty pe a name for the QoS policy in th e Policy Name entry f ield.
15-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 15 Configuring QoS Configuri ng QoS Step 4 If the packets that you need to pr ioritize contain IP preceden ce information in the IP header TOS field, select an IP precedence classification from the IP Precedence drop-down menu.
15-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 15 Configuring QoS Configuring QoS • Assured Forw arding — Class 4 High • Class Selector 1 • C.
15-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 15 Configuring QoS Configuri ng QoS Step 18 Use the Apply Policies to Interface/VLANs drop-d own menus to apply policies to the access point Ethernet and radio ports.
15-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 15 Configuring QoS Configuring QoS IGMP Snooping When Internet Group Membership Protocol (IGMP) snooping is enabled on a switch an d a client roams from one access poin t to another , the clients’ mul ticast session is dropped.
15-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 15 Configuring QoS Configuri ng QoS Figure 15-4 sho ws t he Radio Acc ess Categories page. Dual-radi o access point s have a Radio Access Categories page fo r each radio.
15-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 15 Configuring QoS Configuring QoS Note In this release, clients are bloc ked from using an access category when you select Enable for Admission Control.
15-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 15 Configuring QoS QoS Configuration Examp les Enabling Admission Control This section descri bes how to enable admission control on an SSID.
15-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 15 Configuring QoS QoS Configuration Ex amples Figure 15-5 QoS Policies P age f or V oice Example The network admin istrat or also enables the QoS element for wir eless phones settin g on the Qo S Policies - Adv anced page.
15-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 15 Configuring QoS QoS Configuration Examp les Figure 15-6 QoS Policies P age for Video Example.
15-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 15 Configuring QoS QoS Configuration Ex amples.
CH A P T E R 16-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 16 Configuring Filters This chapter describe s how to configure and manage MA C address, IP , an d Ethertype filters on the access point using the we b-browser i nterface .
16-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 16 Configuring Filters Understanding Filte rs Understanding Filters Protocol filters (IP protocol , IP port, and Ethert ype) prevent or allo w the use of specific protocols through the acc ess point’ s Ethernet an d radio ports.
16-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 16 Configuring Fi lters Configuring Filters Using the Web-Browser Interface Configuring Filters Using the Web-Browser Interface This section descri bes how to config ure and enable f ilters using the web-bro wser interface.
16-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 16 Configuring Filters Configuring Filters Usi ng the Web-Browser Interface Figure 16-1 MAC Addr ess Filters P age Follo w this link path to reach the Address Filters page: 1.
16-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 16 Configuring Fi lters Configuring Filters Using the Web-Browser Interface Step 5 Use the Mask entry field to indicate ho w many bi ts, from left to rig ht, the f ilter checks against t he MA C address.
16-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 16 Configuring Filters Configuring Filters Usi ng the Web-Browser Interface If clients are not f iltered immediately , click Reload on the Sy stem Conf iguration page to restart the access point.
16-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 16 Configuring Fi lters Configuring Filters Using the Web-Browser Interface Step 3 Click Advanced Security to bro wse to the Adv anced Security: MA C Address Authentication page.
16-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 16 Configuring Filters Configuring Filters Usi ng the Web-Browser Interface Step 6 Click A pply . ACL Logging A CL logging is not supported on the br idging interfaces of AP plat forms.
16-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 16 Configuring Fi lters Configuring Filters Using the Web-Browser Interface Figure 16-6 I P Filters P age Follo w this link path to reach the IP Filters page: 1.
16-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 16 Configuring Filters Configuring Filters Usi ng the Web-Browser Interface Creating an IP Filter Follo w these steps to create an IP fil ter: Step 1 Follo w the link path to the IP Filters page.
16-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 16 Configuring Fi lters Configuring Filters Using the Web-Browser Interface Step 15 When the f ilter is complete, click Appl y . The filter is sav ed on the access point, but it is not enabled until you apply i t on the Apply Filters page.
16-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 16 Configuring Filters Configuring Filters Usi ng the Web-Browser Interface Figure 16-8 Ethertype Filters P age Follo w this link path to reach the Ethertype Fi lters page: 1.
16-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 16 Configuring Fi lters Configuring Filters Using the Web-Browser Interface Step 7 Click Add . The Ethertype appears in the Filters Classes fi eld. T o remove the Ethertype from the Filters Classes list, select it and click Delete C lass .
16-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 16 Configuring Filters Configuring Filters Usi ng the Web-Browser Interface.
CH A P T E R 17-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 17 Configuring CDP This chapter describes ho w to configure Cisco Disco very Protocol (CDP) on your access point .
17-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 17 Configur ing CDP Understanding CDP Understanding CDP Cisco Discov ery Protocol (CDP) is a de vice-disco v ery protocol that runs on all Cisco netw ork equipment.
17-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 17 Configuring CDP Configuring CDP Use the no form of the CDP commands to return to the def ault settings.
17-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 17 Configur ing CDP Monitoring a nd Maintaining CDP This e xample sho ws how to en able CDP .
17-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 17 Configuring CDP Monitoring an d Maintaining CDP Belo w are six e xamples of output from the CD P sh.
17-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 17 Configur ing CDP Monitoring a nd Maintaining CDP Device ID: idf2-1-lab-l3.
17-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 17 Configuring CDP Monitoring an d Maintaining CDP AP# show cdp neighbor Capability Codes: R - Router,.
17-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 17 Configur ing CDP Monitoring a nd Maintaining CDP.
CH A P T E R 18-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 18 Configuring SNMP This chapter describe s how to configure the Simple Network Managemen t Protocol (SNM P) on your access point.
18-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 18 Configu ring SNMP Understanding SNMP Understanding SNMP SNMP is an appli cation-layer protocol that pr o vides a message format for communication between SNMP manage rs and agents.
18-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 18 Configuring SNMP Understanding SNMP T able 18-1 lists the SNMP v ersions and security le vels supported on access points: For detailed infor mation on SN MPv3, click this link to browse to the Ne w F eatur e Documentation for Cisco IOS Release 12.
18-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 18 Configu ring SNMP Understanding SNMP SNMP Agent Functions The SNMP agent responds to SNMP manager request s as follows: • Get a MIB variable—The SNM P agent begins this fu nction in response t o a requ est from th e NMS.
18-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 18 Configuring SNMP Configuring SNMP Configuring SNMP This section descri bes how to configu re SNMP on your access point.
18-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 18 Configu ring SNMP Configuring SNMP Configuring Community Strings Y ou use the SNMP community string to def ine th e relationship between the SNMP manager and the agent.
18-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 18 Configuring SNMP Configuring SNMP T o disable access for an SNMP community , set the community strin g for that community to the null string (do not enter a v alue for th e community string).
18-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 18 Configu ring SNMP Configuring SNMP Configuring SNMP-Server Hosts T o conf igure the recipient of an.
18-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 18 Configuring SNMP Configuring SNMP Some notif ication types cannot be controlled with the snmp-server enable global conf iguration command, such as tty and udp-port .
18-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 18 Configu ring SNMP Configuring SNMP T o remove the specified hos t from receiving traps , use the no snmp-server host host global confi guration command.
18-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 18 Configuring SNMP Configuring SNMP This example sho ws how to assign the strings open and ieee to S.
18-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 18 Configu ring SNMP Displaying SNMP Status AP(config)# snmp-server group admin v3 priv read iso writ.
CH A P T E R 19-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 19 Configuring Repeater and Standby Access Points and Workgroup Bridge Mode This chapter describes how to conf ig ure your a ccess point as a repeater, as a hot standb y unit, or as a workgroup bri dge.
19-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 19 Configurin g Repeater and Standby Access Points and Workgro up Bridge Mode Understanding Repe ater .
19-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 19 Configuring Repeater a nd Standby Access Points an d Workgroup Bridge Mode Configuring a Repeater A.
19-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 19 Configurin g Repeater and Standby Access Points and Workgro up Bridge Mode Configuring a Repea ter Access Point Default Configuration Access points are configured as root units by default.
19-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 19 Configuring Repeater a nd Standby Access Points an d Workgroup Bridge Mode Configuring a Repeater A.
19-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 19 Configurin g Repeater and Standby Access Points and Workgro up Bridge Mode Aligning Antenn as AP# c.
19-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 19 Configuring Repeater a nd Standby Access Points an d Workgroup Bridge Mode Aligning A ntennas Setting Up a Repeater As a LEAP Client Y ou can se t up a repeater access point to authenticat e to yo ur network like othe r wirele ss client devices.
19-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 19 Configurin g Repeater and Standby Access Points and Workgro up Bridge Mode Understanding Hot Standb.
19-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 19 Configuring Repeater a nd Standby Access Points an d Workgroup Bridge Mode Configuring a Hot Sta ndby Access Po int Except for the IP address, the standby access point’ s settings should be identical to the settings on the monitored access po int.
19-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 19 Configurin g Repeater and Standby Access Points and Workgro up Bridge Mode Configuring a Hot Stand.
19-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 19 Configuring Repeater a nd Standby Access Points an d Workgroup Bridge Mode Configuring a Hot Sta n.
19-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 19 Configurin g Repeater and Standby Access Points and Workgro up Bridge Mode Configuring a Hot Stand.
19-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 19 Configuring Repeater a nd Standby Access Points an d Workgroup Bridge Mode Understanding Workg roup Bridge Mode Understanding Workgroup Bridge Mode Y ou can configure 1100, 1130, 1200, 1230, and 1240 series access poin ts as workgroup bridges.
19-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 19 Configurin g Repeater and Standby Access Points and Workgro up Bridge Mode Understanding Workgroup Brid ge Mode Figure 19-2 sho ws a n access point in workgroup br idge mode.
19-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 19 Configuring Repeater a nd Standby Access Points an d Workgroup Bridge Mode Understanding Workg roup Bridge Mode bridges, t hat can ass ociate t o an access point or bridge.
19-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 19 Configurin g Repeater and Standby Access Points and Workgro up Bridge Mode Configuring Workg roup Bridge Mode The follo wing e xample sho ws how the comman d is used .
19-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 19 Configuring Repeater a nd Standby Access Points an d Workgroup Bridge Mode Configuring Workg roup Bridge Mode Step 3 station-ro le workgr oup-bridge Set the radio role to workgro up bridge.
19-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 19 Configurin g Repeater and Standby Access Points and Workgro up Bridge Mode The Workgr oup Bridge in a Lightweight Environ ment This exampl e shows ho w to configu re an 1100 series access point as a w orkgroup bridge.
19-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 19 Configuring Repeater a nd Standby Access Points an d Workgroup Bridge Mode The Workgroup Bridge in.
19-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 19 Configurin g Repeater and Standby Access Points and Workgro up Bridge Mode The Workgr oup Bridge i.
CH A P T E R 20-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 20 Managing Firmware and Configurations This chapter describ es how to manipulate the Flash fi le system, ho w to copy configuration f iles, and how to archiv e (upload and download) software images.
20-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with the Flash File System Working with the Flash File System The Flash file system on your ac cess point provides se veral commands to help you m anage software image and conf iguration files.
20-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with the Flash File Syste m Setting the Default File .
20-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with the Flash File System T o display information a.
20-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with the Flash File Syste m Use the /recursiv e ke yword to delete th e named directory and all subd irectories and the f iles contained in it.
20-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with the Flash File System Use the /recursiv e ke yword for deleti ng a directory and all su bdirectories and the f iles contained in it.
20-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with the Flash File Syste m For sour ce-url , specify the source URL alias for the local or network f ile system.
20-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with Configuration Files This ex ample sho ws ho w to e xtract the cont ents of a tar f ile located o n the TFTP server at 172.
20-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with Configuration Files This section includes this i.
20-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with Configuration Files Creating a Configuration File by Using a Text Editor When creating a conf iguration file, you must list commands logically so that the system can respond appropriately .
20-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with Configuration Files • Ensure that the conf iguration f ile to be do wnloaded is in th e correct directory on the TFTP serv er (usually / tftpboo t on a UNIX workstation).
20-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with Configuration Files Use one of these privile g.
20-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with Configuration Files Preparing to Download or Up.
20-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with Configuration Files Connected to 172.16.101.101 Loading 1112 byte file host1-confg:![OK] ap# %SYS-5-CONFIG: Configured from host1-config by ftp from 172.
20-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with Configuration Files Building configuration.
20-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with Configuration Files Preparing to Download or U.
20-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with Configuration Files This example sho ws how to cop y a configurati on file named host1-confg from the netadmin1 directory on the remote se rver with an IP address of 1 72.
20-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with Software Images This exampl e show s how to co py the running conf iguration file named ap 2-confg to the netadmin1 directory on the remote host with an IP address of 172.
20-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with Software Images Y ou download an access point image f ile from a TFTP , FTP , or RCP serv er to upgrade the access point software.
20-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with Software Images The info.ver file is always at the end of the ta r fi le and contains the same information as the info file.
20-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with Software Images • During upload operati ons, .
20-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with Software Images The download algorithm v erif ies that the image is appropriate for the acce ss poin t model and that enough DRAM is present, or it aborts the proce ss and reports an error .
20-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with Software Images The archiv e upload-sw pri vileged EXEC command b uilds an image f ile on the server b y uploading these files in order: info, the Cisco IOS image, th e HTML files, and info.
20-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with Software Images • The password set by the ip ftp passw ord passwor d global conf iguration comman d if the command is configured.
20-25 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with Software Images Note T o av oid an unsuccessful.
20-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with Software Images The download algorithm v erif ies that the image is appropriate for the acce ss poin t model and that enough DRAM is present, or it aborts the proce ss and reports an error .
20-27 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with Software Images The archiv e upload-sw command b uilds an image fi le on the server b y uploading these fil es in order: info, the Cisco IOS image, th e HTML files, and info .
20-28 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with Software Images RCP requires a client to send a remote usern ame on each RCP request to a se rver .
20-29 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with Software Images Downloading an Image File by Using RCP Y ou can download a ne w image file an d replace or k eep the current image.
20-30 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with Software Images Note T o av oid an unsuccessfu.
20-31 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with Software Images Note If the Flash de vice has suff icient space to hold two images an d you want to o verwrite one of these images with the same versi on, you must specify the /ov erwrite op tion.
20-32 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with Software Images The archiv e upload-sw privile g ed EXEC command b uilds an image fil e on the server b y uploading these files in order: info, the Cisco IOS image, th e HTML files, and info.
20-33 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 20 Managing Firmware and Con figurations Working with Software Images Step 7 Click the Upgrade b utton. For additi onal information, click th e Help icon on the Software Upgrade screen.
20-34 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 20 Mana ging Firmware and Configu rations Working with Software Images.
CH A P T E R 21-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 21 Configuring System Message Logging This chapter describes how to conf igure sy stem message logging on your acces s point.
21-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 21 Config uri ng System Message Logg ing Understanding Syste m Message Logging Understanding System Message Logging By default, access points send the outpu t from system messages and deb ug pri vileg ed EXEC commands to a logging process.
21-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 21 Configuring System Message Logging Configuring System Message Lo gging T able 21-1 describes the elements of syslog messages.
21-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 21 Config uri ng System Message Logg ing Configuring System Message Log ging Disabling and Enabling Message Logging Message logging is enabled b y default.
21-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 21 Configuring System Message Logging Configuring System Message Lo gging Setting the Message Display Destination Device If message logging is en abled, you ca n send messages to specific locati ons in additi on to the cons ole.
21-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 21 Config uri ng System Message Logg ing Configuring System Message Log ging Enabling and Disabling Timestamps on Log Messages By default, log messag es are not timestamped.
21-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 21 Configuring System Message Logging Configuring System Message Lo gging This example sh ows part o f a logging display wi th sequenc e numbers enabled: 000019: %SYS-5-CONFIG_I: Configured from console by vty2 (10.
21-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 21 Config uri ng System Message Logg ing Configuring System Message Log ging T able 21-3 describes the level k eyw ords. It also lists the corresponding U NIX syslog defini tions from the most se vere le vel to the least se vere le vel.
21-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 21 Configuring System Message Logging Configuring System Message Lo gging Beginni ng in pri vileged EX.
21-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 21 Config uri ng System Message Logg ing Configuring System Message Log ging Configuring UNIX Syslog Servers The next sections describe how to configure the 4.
21-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 21 Configuring System Message Logging Configuring System Message Lo gging T o remove a syslog serv er , use the no logging host global conf iguration command, and specify the syslog server IP address.
21-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 21 Config uri ng System Message Logg ing Displaying the Lo gging Configuration Displaying the Logging Configuration T o display the current log ging conf iguration and t he contents of the log b uffer , use the show lo gging pri vileged EXEC command.
CH A P T E R 22-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 22 Wireless Device Troubleshooting This chapter pro vides troubleshooting procedures for basic p roblems with the wireless de vice.
22-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 22 Wireless Device Troubleshooting Checking the To p Panel Indicato rs Checking the Top Panel Indicators If your wireless device is not communicating, check th e three LED indicators on the top panel to quickly assess the device’ s status.
22-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 22 Wirele ss Device Tr oubleshootin g Checking the Top Pan el Indicators Figur e 22-2 Indicators on th.
22-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 22 Wireless Device Troubleshooting Checking the To p Panel Indicato rs Figure 22-4 Indicators on the 3.
22-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 22 Wirele ss Device Tr oubleshootin g Checking the Top Pan el Indicators Operating status –G r e e n B l i n k i n g green T ransmitting/recei ving radio packets.
22-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 22 Wireless Device Troubleshooting Checking the To p Panel Indicato rs Indicators on 1130 Series Access Points If your access point i s not working pro perly , check the LED ring on the top panel or the Ethernet and Radio LEDs in the cable bay area.
22-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 22 Wirele ss Device Tr oubleshootin g Checking the Top Pan el Indicators The LED signals are listed in Ta b l e 2 2 - 2 .
22-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 22 Wireless Device Troubleshooting Checking the To p Panel Indicato rs Boot loader errors Red Red Red DRAM memory tes t failure. Off Red Blinking red and blue Flash file syst em failure.
22-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 22 Wirele ss Device Tr oubleshootin g Checking the Top Pan el Indicators Indicators on 1240 Series Access Points If your access point is not w orking properly , check the Status, Ethernet, and Radio LEDs on the 2.
22-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 22 Wireless Device Troubleshooting Checking the To p Panel Indicato rs Indicators on 1300 Outdoor Access Point/Bridges If your access point/bridge is no t associating with a remote bridge or access point, check the four LEDs on the back panel.
22-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 22 Wirele ss Device Tr oubleshootin g Checking the Top Pan el Indicators Figur e 22-7 LEDs Normal Mode LED Indications During access poi nt/bridge op eration the LEDs provide status information as sho wn in T able 22-4 .
22-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 22 Wireless Device Troubleshooting Checking the To p Panel Indicato rs The access point/bridge uses a blinking code to identify v arious error conditions.
22-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 22 Wirele ss Device Tr oubleshootin g Checking the Top Pan el Indicators Power Injector When the po wer injector is po wered up, it applie s 48-VDC to the dual-coax cables to the access point/bridge.
22-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 22 Wireless Device Troubleshooting Checking Power • Cisco Aironet Po wer Injector LR2T—optional t.
22-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 22 Wirele ss Device Tr oubleshootin g Checking Basic Settings Checking Basic Settings Mismatched basic settings are the mo st common causes of lost conn ecti vity with wireless cli ents.
22-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 22 Wireless Device Troubleshooting Resetting to the Default Configuration Resetting to the Default Configuration If you for get the password that allows you to configu re the wireless devi ce, you may need to completel y reset the conf iguration.
22-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 22 Wirele ss Device Tr oubleshootin g Resetting to the Default Configuration Step 3 Enter your username in the User Name f ield. Step 4 Enter the wireless de vice password in the Passw ord field and press Enter .
22-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 22 Wireless Device Troubleshooting Reloading the Access Point Image Step 6 Use the ren am e command to change the n ame of the conf ig.txt f ile to conf ig.
22-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 22 Wirele ss Device Tr oubleshootin g Reloading the Access Point Image Follo w these steps to reload the access point image file: Step 1 The PC you intend to use must be configu red with a static IP address i n the range of 10.
22-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 22 Wireless Device Troubleshooting Reloading the Access Point Image Step 7 Click Upload . For additi onal information, click th e Help icon on the Software Upgrade screen.
22-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 22 Wirele ss Device Tr oubleshootin g Reloading the Access Point Image Step 3 Let the wireless de vice boot until it begins to infl ate the image. When you see these lines on the CLI, press Esc : Loading "flash:/c350-k9w7-mx.
22-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 22 Wireless Device Troubleshooting Reloading the Access Point Image extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_last_flat.gif (318 bytes) extracting c350-k9w7-mx.
22-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-11350-01 Chapter 22 Wirele ss Device Tr oubleshootin g Reloading the Access Point Image Step 14 Sav e the file to a director on your hard dri ve. Obtaining TFTP Server Software Y ou can download TFTP server software from se ve ral websites.
22-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Chapter 22 Wireless Device Troubleshooting Reloading the Access Point Image.
A-1 Cisco IOS Software Configuration Guide for Cisco Aironet Access Points OL-11350-01 APPENDIX A Protocol Filters The tables in this appendix list some of the prot ocol s that you can f ilter on th e access point.
A-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix A Protocol Filters T able 0-1 Ethertype Protocols Protocol Additional Identifier ISO Designator ARP — 0x0806 RARP — 0x8035 IP — 0x0800 Berkele y T railer Negotiati on — 0x1000 LAN T est — 0x0708 X.
A-3 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Appendix A Protocol Filters T able 0-2 IP Protocols Protocol Additional Identifier ISO Designator dummy — 0 In.
A-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix A Protocol Filters T abl e 0-3 IP P ort Pr otocols Protocol Additional Identifier ISO Designator TCP p.
A-5 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Appendix A Protocol Filters TSAP iso-tsap 102 CSO Name Serv er cso-ns csnet-ns 105 Remote T elnet rtelnet 107 Po.
A-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix A Protocol Filters SNMP Unix Multiple xer smux 199 AppleT alk Routing at-rtmp 201 AppleT alk name binding at-nbp 202 AppleT alk echo at-echo 204 AppleT alk Zone Information at-zis 206 NISO Z39.
B-1 Cisco IOS Software Configuration Guide for Cisco Aironet Access Points OL-11350-01 APPENDIX B Supported MIBs This appendi x lists the Simp le Network Manag ement Protocol (SNMP) Management Information Bases (MIBs) that the access point su pports for this soft ware release.
B-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix B Supported MIBs Using FTP to Ac cess the MIB Files • CISCO-MEMOR Y -POOL-MIB • CISCO-PR OCESS-MIB.
C-1 Cisco IOS Software Configuration Guide for Cisco Aironet Access Points OL-11350-01 APPENDIX C Error and Event Messages This appendix lists t he CLI error and ev ent message s.
C-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix C Error and Event Me ssages Conventions Conventions System error messages are displa yed in the fo rmat shown in Ta b l e C - 1 .
C-3 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Appendix C Error and Event Messages Software Auto Upgrade Messages Software Auto Upgrade Messages Error Message SW-AUTO-UPGRADE-2-FATAL_FAILURE: “At tempt to upgrade software f ailed, software on flash may be deleted.
C-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix C Error and Event Me ssages Association Manage ment Messages Error Message AUTO-INSTALL-4-IP_ADDRESS_DH CP: “The radio is operating in automatic install mode and has set ip address dhcp.
C-5 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Appendix C Error and Event Messages Unzip Messages Error Message DOT11-6-ROAMED: “Station %e roamed to %e.” Explanation The indic ated station roamed to the indicated new access point.
C-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix C Error and Event Me ssages 802.11 Subsystem Messages Error Message DOT11-4-VERSION_UPGRADE: “I nterface %d, upgrading radio firmware.” Explanation When starting the indic ated interface, th e acc ess point found the wrong firmware version.
C-7 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Appendix C Error and Event Messages 802.11 Subsystem Messages Error Message DOT11-3-RADIO_IF_LO: “Inter face %s Radio cannot lock IF freq.
C-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix C Error and Event Me ssages 802.11 Subsystem Messages Error Message DOT11-4-DFS_STORE_FAIL: “DF S: could not store the frequency statistics.” Explanation A failure occur red writing the DFS statistics t o flash.
C-9 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Appendix C Error and Event Messages 802.11 Subsystem Messages Error Message IF-4-MISPLACED_VLAN_TAG: “D etected a misplaced VLAN tag on source Interface %. Dropping packet.
C-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix C Error and Event Me ssages 802.11 Subsystem Messages Error Message DOT11-4-CANT_ASSOC: “Interf ace %, cannot associate %s.” Explanation The indic ated interface device could not asso ciate to an indicated parent access point.
C-11 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Appendix C Error and Event Messages 802.11 Subsystem Messages Error Message DOT11-4-MAXRETRIES: “Packet to client %e reached max retries, removing the client.
C-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix C Error and Event Me ssages 802.11 Subsystem Messages Error Message DOT11-4-RADIO_NO_FREQ: “Int erface &s, all frequencies have been blocked, interface not started.
C-13 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Appendix C Error and Event Messages 802.11 Subsystem Messages Error Message DOT11-4-FLASHING_RADIO: “Interfa ce %s, flashing radio firmware (%s).” Explanation The indic ated interface radio has been stop ped to loa d the indicated new f irmware.
C-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix C Error and Event Me ssages 802.11 Subsystem Messages Error Message DOT11-4-UPLINK_LINK_DOWN: “ Interface %s, parent lost: %s.” Explanation The connection to the parent access point on the indicated interf ace was lost for the reason indicated.
C-15 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Appendix C Error and Event Messages 802.11 Subsystem Messages Error Message DOT11-6-ANTENNA_GAIN: “Inte rface %s, antenna position/gain changed, adjusting transmitter power.
C-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix C Error and Event Me ssages 802.11 Subsystem Messages Error Message DOT11-4-CCMP_REPLAY: “AES-CCMP TSC r eplay was detected on packet (TSC 0x%11x received from &e).
C-17 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Appendix C Error and Event Messages 802.11 Subsystem Messages Error Message DOT11-3-TKIP_MIC_FAILURE_REPEATED : “Two TKIP Michael MIC f ailures were detected within %s seconds on %s int erface.
C-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix C Error and Event Me ssages 802.11 Subsystem Messages Error Message DOT11-4-NO_VLAN_ID: “VLAN id %d from Radius server is not configured for station %e.
C-19 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Appendix C Error and Event Messages Inter-Access Point Protocol Messages Error Message SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: “IOS crypto FIPS self test passed .” Explanation SOAP FIPS self test passed.
C-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix C Error and Event Me ssages Local Authenticato r Messages Local Authenticator Messages Error Message .
C-21 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Appendix C Error and Event Messages Local Authenticato r Messages Error Message DOT1X-SHIM-3-UNSUPPORTED_KM : “Unsupported key management: %X.” Explanation Am error occurred during the initial ization of the shim layer .
C-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix C Error and Event Me ssages WDS Messages out before tryi ng the next configured server . A Radius server marked as dead is skippe d by additional requests for the du ration of the minutes unless all serv ers are marked dead .
C-23 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Appendix C Error and Event Messages Mini IOS Messages Error Message WLCCP-NM-3-WNM_LINK_DOWN: L ink to WNM is down Explanation The ne twork manager is no t responding to keep-activ e messages.
C-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix C Error and Event Me ssages Access Point/Bridge Me ssages Error Message Saving this config to nvram may corrupt any network management or security files stored at the end of nvram.
C-25 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Appendix C Error and Event Messages Cisco Discovery Protocol Messages Cisco Discovery Protocol Messages Error Message CDP_PD-2-POWER_LOW: %s - %s %s (%e) Explanation The system is not supplied wit h suf ficient p ower .
C-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 Appendix C Error and Event Me ssages External Radius Se rver Error Messages.
GL-1 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 GLOSSARY 802.11 The IEEE standard that specifies carrier sense media access control and physical layer specif ications for 1- and 2- megabit-per -second (Mbps) wireless LANs operating in the 2.
Glossary GL-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 beacon A wireless LAN pa cket that signals the a v ailability and presence of the wireless device.
Glossar y GL-3 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 dipole A ty pe of low-gain (2.2-dBi) antenna cons isting of two (often internal ) elements. domain n ame The te xt name that refers to a grouping of networks or netwo rk resources based on org anization-type or geogr aphy; for e xample: name.
Glossary GL-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 IP subnet mask The number us ed to identi fy the IP subnetwork, i ndicating whet her the IP address can be recognized on the LAN or if i t must be reached through a gate way .
Glossar y GL-5 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 roaming A feature of some Access Points that allo ws users to move throug h a facility while maintaining an unbroken co nnection to the LAN. RP-TNC A connector ty pe unique to C isco Aironet rad ios and antenn as.
Glossary GL-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-11350-01 W WDS W ireles s Domain Services (WDS). An access point providing WDS on your wireless LAN maintains a cache of creden tials for CCKM-capable client de vices on your wireless LAN.
IN-1 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 INDEX Numerics 1130 series indicators 22-6 1240 series indicators 22-9 1300 outdoor access point /bridge indicators 22-10 350 series bridge int eroperability 8-3 802.
Index IN-2 Cisco IOS Software Config uration Gu ide for Cisco Aironet Access Po ints OL-11350-01 B Back button 2-5 backoff 6-32 backup authenti cator, lo cal 9-1 bandwid th 6-13 banners configuring lo.
Index IN-3 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 commands abbreviating 3-3 accounting 7-5 antenna 6-25 authentication client 7-5 beacon dtim-p eriod 6-30 .
Index IN-4 Cisco IOS Software Config uration Gu ide for Cisco Aironet Access Po ints OL-11350-01 types and location 20-9 uploading preparing 20-10, 20-13, 20-16 reasons for 20-8 using FTP 20-14 using .
Index IN-5 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 duplex, Ethernet port 5-18 Dynamic Frequency Selection 6-17 blocking chan nels 6-20 CLI commands 6-18 con.
Index IN-6 Cisco IOS Software Config uration Gu ide for Cisco Aironet Access Po ints OL-11350-01 filter output (CLI commands) 3-8 firmware upgrade 2-1 version 2-5 Flash 20-1 Flash device, number of 20.
Index IN-7 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 J Japan upgrade uti lity 1-2 frequency set 1-2 migrating to W52 domain 5-37 verfying th e migra tion 5-39.
Index IN-8 Cisco IOS Software Config uration Gu ide for Cisco Aironet Access Po ints OL-11350-01 interface configuration 3-2 line configuration 3-2 privileged EXEC 3-2 user EXEC 3-2 monitoring CDP 17-.
Index IN-9 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 Q QBSS 15-3 dot11e parameter 15-3 QoS configuration guid elines 15-5 dot11e command 15-9 overview 15-2 Qo.
Index IN-10 Cisco IOS Software Config uration Gu ide for Cisco Aironet Access Po ints OL-11350-01 request to send (RTS) 6-30 restricting access overview 5-3 passwords and p rivilege lev els 5-3 RADIUS.
Index IN-11 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 SNMP, FTP MIB files B-2 snmp-server group command 18-7 SNMP versio ns supported 18-2 SNTP overview 5-27 .
Index IN-12 Cisco IOS Software Config uration Gu ide for Cisco Aironet Access Po ints OL-11350-01 level keywords, descri bed 21-8 limiting messages 21-8 message format 21-2 overview 21-2 rate limit 21.
Index IN-13 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-11350-01 1300 outdoor access point /bridge power injector 22-13 error messages (CLI) 3-4 system message logging 2.
Index IN-14 Cisco IOS Software Config uration Gu ide for Cisco Aironet Access Po ints OL-11350-01 world-mode command 6-23 world mode roaming 6-22 WPA 11-7 WPA migration mode 11-13 wpa-psk comm and 11-.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Cisco Systems 0L-11350-01 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Cisco Systems 0L-11350-01 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Cisco Systems 0L-11350-01, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Cisco Systems 0L-11350-01 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Cisco Systems 0L-11350-01, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Cisco Systems 0L-11350-01.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Cisco Systems 0L-11350-01. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Cisco Systems 0L-11350-01 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
