Manuel d'utilisation / d'entretien du produit Q3 du fabricant Cateye
Aller à la page of 79
.
ENG -1 Continue Thank you for purchasing the CATEYE Q3 Multi-Sport Computer. The Q3 is a wristwatch heart rate monitor with additional cyclocomputer features to allow athletes to extensively organize and analyze their training data.
ENG -2 Before use See this section for installation of the unit on the bicycle, use of the heart rate sensor, wristwatch set-up, and the basic operation of the product. Bicycle Installation • ..........................................See page 9-11 Heart rate sensor • .
ENG -3 Continue Introduction .........................1 About the manuals .................2 Proper use of the CatEye Q3 .....5 Important ............................6 Description of wristwatch and its parts ..............................7 Wristwatch .
ENG -4 Searching for sensor ID ........... 52 Setting the measurement unit ... 54 Setting the record interval ........ 55 Total trip distance/total elapsed time entry.................... 56 Setting the auto-mode ............. 57 Setting sound.........
ENG -5 Continue Proper use of the CatEye Q3 Please follow the following instructions for safe usage. The meaning of icons in this manual: Warning!!!: Sec tions marked with these icons are c ritical for safe u se of the devi ce. Be sure t o follo w these instru ctions .
ENG -6 2.4 GHz digital wireless system 2.4 GHz-frequency digital wireless technology, which is the same technology used for wireless LAN, is used for both the integrated speed/cadence sensor and the heart rate sensor.
ENG -7 Continue Wristwatch Description of wristwatch and its parts Accessories Bracket (for handlebar -mount) Speed sensor (SPEED/CADENCE) Heart rate sensor HR strap Wheel magnet Cadence magnet Nylon .
ENG -8 Screen display Icon Description Sensor icon Displays the speed sensor currently synchronized. km/h mph Speed unit Flashes while the measurement (counting the elapsed time). Alarm clock Lights up when the alarm clock is on. Speed/Cadence sensor signal Indicate Speed/Cadence sensor signal status.
ENG -9 Before use Continue Bicycle Installation Mount the speed sensor and magnet 1-1.Lightly secure the speed sensor Locate the speed sensor on the left (non-drive side) chain stay as shown above, and loosely secure it with the nylon ties. Do not tighten the nylon ties completely at * this stage.
ENG -10 Before use When the speed sensor is not positioned properly in respect to the two * magnets (in both Steps 2 and 3), move the speed sensor back and forth so that it is positioned properly. After you move the speed sensor, adjust the position so that the two magnets face the relevant sensor zone.
1 2 ENG -11 Before use Continue Install the wristwatch onto the handlebar Install the wristwatch to the handlebar with a bracket. Check the correct direction of the bracket, and attach it to the handlebar. 1. Attach the bracket in the correct direction according to the handlebar size, and fix it using nylon ties.
ENG -12 Before use Heart rate is measured when the heart rate sensor is worn on the chest. Before wearing the heart rate sensor Warning!!!: This product must NOT be used by those who have a pacemaker. To avoid measurement errors, it is recommended to moisten the electrode pads • with water.
ENG -13 Before use Continue Wristwatch's basic items must be set up before using it. Removing the insulation sheet When you use the unit for the first time after purchas - ing, remove the insulation sheet under the battery. 1 Open the battery cover of the wristwatch using a coin, etc.
ENG -14 Before use * Select “ YES ” by pressing the MODE1 or MODE2 button for the formatting operation. As the formatting operation de- letes all data, select “ NO ” for the restarting operation. See “Formatting/Restarting operation” on page 20 for differ- ences between the formatting and restarting operations.
ENG -15 Before use Continue Switching to the Setup mode Switch the wristwatch from the Clock mode to the Setup mode, and set the tire circumference and the measurement unit. 1. Press and hold the MENU button in the Clock mode to display “ SETUP MENU ” on the screen.
ENG -16 Before use Tire circumference Y ou can find the tire circumference (L) of your tire size in the tire cir cum- ference reference table below, or actually measure the tire circumference (L) of your bicycle. How to measure the tire circumference (L) For the most accurate measurement, do a wheel roll out.
ENG -17 Before use Continue Selecting measurement unit Select the speed unit. 1. Press the MODE1 button twice to switch to “ UNITS ”, and confirm with the SSS button. Switch screen : MODE2 MODE1 (or) Confirm : SSS 2. Select the speed unit by pressing the MODE1 or MODE2 button, and confirm with the SSS button.
ENG -18 Before use Operation test It may take up to approximately 2 minutes to display the screen because the * wristwatch checks the sensor when switching to Sports mode. If the signal icon * or on the measurement screen is turned off, press the MODE1 or MODE2 button to turn it on.
ENG -19 Before use Continue Important: When the speed, cadence, and/or heart rate are/is not displayed, possible causes are as follows. Speed and cadence are not displayed. Check items Remedy Is the Speed and Cadence sensor icon on ? If icon is off, the wristwatch cannot receive any data.
ENG -20 Before use Formatting/Restarting operation Ther e are 2 differ ent wris twatch set-up operati ons; for matting and restart ing oper ations. Follow the appropriate one depending on the situation. Formatting : When you want to delete all data and the setup of the wristwatch.
MENU MENU ENG -21 Before use Continue Switching between modes The wristwatch has 4 types of mode functions and the Setup mode. “ CLOCK MENU ”, “ SPORTS MENU ”, “ OPTION MENU ”, and “ DATA MENU ” are alternatively selected in sequence by pressing the MENU button.
ENG -22 Before use Backlight Pressing and holding the MODE1 or MODE2 button illuminates the display for about 3 seconds (Except in the Setup mode). Pressing any button while backlight is still on extends the illu- * mination for another 3 seconds.
ENG -23 Clock mode Continue Switching to Clock mode Select “ CLOCK MENU ” by pressing the MENU button until display swithces to Clock mode. Clock mode is the default screen, so if the power-saving mode is * activated in any other mode display will switch to Clock mode.
ENG -24 Sports mode Switching to Sports mode Select “ SPORTS MENU ” by pressing the MENU button until display switches to Sports mode. Function in Sports mode The Sports mode is for measurement using the cyclocomputer and heart rate monitor functions.
ENG -25 Sports mode Continue Lower display data (Switch using the MODE2 button) Displays additional ride data. *1 The tra ining functi on scree n displ ays one of the followi ng; cou ntdown dista nce, countdo wn time, or interval. For details, see “Training function (countdown function and interval function)” on page 31.
ENG -26 Sports mode Manual measurement When the auto-mode is off ( is off), use the SSS button to start/stop the measurement. Stop reminder The stop reminder function Reminds the rider with an alarm incase the stopwatch is forgotten to be stopped after the ride.
ENG -27 Sports mode Continue Display data in Sports mode (upper and middle display) Switch pressing the MODE1 button Current speed Displays the current speed in real time. Updates every second. Heart rate Displays the current heart rate in real time. Updates every second.
ENG -28 Sports mode Display data in Sports mode (lower display) Switch pressing the MODE2 button TM Elapsed time Displays the elapsed time from the start of measure - ment t o the 1/10 second. When it exceeds 9 9:59’59 ”, it repeats from 00’00”0.
ENG -29 Sports mode Continue Pace function 2 types of pace arrows, for speed and heart rate, are displayed in Sports mode. The arrow icons indicate whether the current speed/ heart rate is above or below the average speed/heart rate. : The current value is above the average.
MODE2 ENG -30 Sports mode Press the * MODE2 button with the real time lap data to return to the previous Sports mode screen. Lap time and split time The lap time displays elapsed time from the last press of the LAP button. The split time displays the elapsed time from the start of measurement to the point LAP button is pressed.
ENG -31 Sports mode Continue Training function (countdown function and interval function) This unit has a countdown function that counts down the predetermined time and indicates when the time is up by setting the target trip distance and elapsed time, and an interval function that is used to set the interval time for a given training.
ENG -32 Sports mode Setting the return time limit 2. Enter the half way time when the ride time is limited, and enjoy your ride without minding the time. Target time for a Century ride 3. Enter the target time for big events such as Century ride and Granfondo, and check your pace.
ENG -33 Sports mode Continue How to use the interval: During the interval training, use the interval display to avoid confusing the * start/stop operation with the reset operation. Setting the interval. 1. Switch to Sports mode by selecting the interval from the Option mode “Setting the training function”.
ENG -34 Sports mode Press the 5. LAP button to start the next repeat of the interval time again. Start pedaling at your interval intensity. Repeat the steps 4 and 5. Interval restart : LAP When “ 6. INT ” or “ REC ” is displayed in the lower display, pressing the SSS button stops the interval measurement.
ENG -35 Option mode Continue Switching to Option mode Select “ OPTION MENU ” by pressing the MENU button until it switches to Option mode. Function in Option mode Option mode is used to change the settings of the training function, which is used most frequently in Sports mode, and the target heart rate zone.
ENG -36 Option mode 2. Select the training function displayed in the lower of the screen. Select the “ DST (countdown distance)”, “ TIME (countdown time)”, or “ INT (interval timer)” pressing the MODE1 or MODE2 button, and then confirm it pressing the SSS button.
ENG -37 Option mode Continue 2. Switch to “ HR ZONE ” pressing the MODE1 or MODE2 button, then confirm it pressing the SSS button. Switch the screen : MODE2 MODE1 (or) Confirm : SSS The target heart rate zone ( * ZONE-1 to 5 ) or “ OFF ” currently selected appears on the screen.
MODE1 MODE2 ENG -38 Data mode Switching Data mode Select “ DATA MENU ” by pressing the MENU button until it switches to Data mode. Function in Data mode The Data mode is used to review and delete the saved files, download the measurement data to your PC, and review past records.
ENG -39 Data mode Continue File view FILE The lap and measurement data are saved into a file automatically each time a ride is reset (Resetting operation on page 26). With the file view, you can review and delete the files saved. Saving and managing the files The wristwatch can record up to 30 files.
ENG -40 Data mode Lap data • One lap per file is used even when there is no lap data. Therefore, the total number of laps is the sum of the total number of laps in all files and the number of files.
ENG -41 Data mode Continue Viewing the contents in a file View the measurement data in a file saved in the wristwatch. 1. Switch to the Data mode “ FILE ”, when any other mode screen is displayed. Select “ DATA MENU ” by pressing the MENU button sev- eral times to switch to “ FILE ” automatically.
ENG -42 Data mode Flow of file view SSS SSS SSS SSS SSS SSS T rip time (hour/minute/second) T rip distance (km [mile]) Average speed Average heart rate Average cadence Calorie consumption (kcal) Maxi.
ENG -43 Data mode Continue Viewing the lap data View the lap data in a file saved in the wristwatch. 1. Select the file number you want to view from the Data mode “ FILE ” (page 41). Select the file number pressing the MODE1 or MODE2 button, and confirm it pressing the SSS button.
ENG -44 Data mode Deleting files You can manually delete the files saved in the wristwatch. When the data volume exceeds the memory capacity, the wristwatch automatically deletes the oldest file, and creates a new file. You can manually delete all files at once.
ENG -45 Data mode Continue Communication between your PC and this unit Send the files saved in the wristwatch to your PC, or reflect the settings changed from your PC in the wristwatch. 1. Boot your PC, and connect the USB communication unit to the your PC.
ENG -46 Data mode 5. Once sending data is completed, “ SEND FILE END ” ap- pears. Press the SSS button and return to the data mode “ PC LINK ”. T o the mode top : SSS Press the 6. MENU button repeatedly to switch to another mode. T o switch modes : MENU Data to be sent from this unit to your PC The data to be sent to your PC are as follows.
ENG -47 Data mode Continue 1. Switch to the Data mode “ FILE ”, w hen a ny ot her m ode s creen is displayed. Select “ DATA MENU ” by pressing the MENU button several times to switch to “ FILE ” automatically. Switch modes : MENU 2. Switch to “ VIEW LOG ” pressing the MODE1 or MODE2 but- tons, and confirm pressing the SSS button.
MODE1 MODE2 ENG -48 Setup mode Setup mode (SETUP) Switching to Setup mode Press and hold the MENU button in the Clock mode or Sports mode until “ SETUP MENU ” appears on the screen, then the wristwatch switches to the Setup mode automatically. Function in Setup mode Setup mode is used to change various settings of the wristwatch.
ENG -49 Setup mode Continue Setting the clock/date CLOCK DATE Set the “Cloc k disp lay for mat”, “Hour ”, “Mi nute”, “Date disp lay for mat”, “Yea r”, “Mo nth” and “Day”.
ENG -50 Setup mode Pressing the 6. MENU button confirms the change, and returns to the Setup mode “ CLOCK DATE ”. Press the MENU button repeatedly to switch to another mode. T o the mode top/switch the mode : MENU Setting the alarm clock ALARM Set the alarm in Clock mode.
ENG -51 Setup mode Continue Pressing the 5. MENU button confirms the change, and returns to the Setup mode “ ALARM ”. Press the MENU button repeatedly to switch to another mode.
ENG -52 Setup mode 4. Enter the last 2 digits for the tire circumference of the sensor selected in Step 3 using the MODE1 and MODE2 buttons, and move digits using the SSS button. Then, enter the first 2 digits in the same way. Increase/decrease: MODE2 MODE1 (or) Move digits: SSS Pressing the 5.
ENG -53 Setup mode Continue 3. Select the sensor ID to be checked. Select from “ HR (heart rate sensor)”, “ SP1 ( speed sensor 1)”, and “ SP2 (speed sensor 2)” pressing the MODE1 and MODE2 buttons, and then confirm it pressing the SSS button.
ENG -54 Setup mode Setting the measurement unit UNITS Change the speed unit. Stop measurement and perform the resetting operation (page 26) before you change * the unit. Unless you perform the resetting operation, “ DATA RESET ” appears on the screen, preventing change of the unit.
ENG -55 Setup mode Continue Setting the record interval SAMPLE RATE In primary measurement, the measurement data is recorded in the selected intervals (seconds). Stop the measurement and perform the resetting operation (page 26) before you * change the record interval.
ENG -56 Setup mode Total trip distance/total elapsed time entry TOTAL DATA You can enter any values to the total trip distance and total elapsed time in the Data mode “Past records” (page 46), then you can start with the values entered.
ENG -57 Setup mode Continue Setting the auto-mode AUTO MODE Switch on/off of the auto-mode (page 25). 1. Press and hold the MENU button in the Clock mode or Sports mode until “ SETUP MENU ” appears on the screen. It switches to “ CLOCK DATE ” automatically.
ENG -58 Setup mode Setting sound SOUND Switch on/off of the button operation sound and target heart rate zone alarm sound. 1. Press and hold the MENU button in the Clock mode or Sports mode until “ SETUP MENU ” appears on the screen. It switches to “ CLOCK DATE ” automatically.
ENG -59 Continue This section is just a general overview of training with heart rate data. For more complete information, there are books and websites with more in-depth information. Generally, the heart rate increases during exercise, getting higher in conjunction with the intensity of the workout.
ENG -60 Obtaining individual heart rate zone for building up power Athletic ability is different from person to person. The effective and reasonable target heart rate zone has to be obtained from the actual ride data. A time trial for 20 minutes or 5 km (hereinafter abbreviated as TT) is required to measure the actual data.
ENG -61 Continue Obtain your target heart rate zone from the table below according to the 7. average heart rate recorded. e.g.) Average heart rate at 20 minutes time trial is 100%.
ENG -62 Training for competition Measu re your resting heart rate just afte r waking in the mornin g and your maxi mum heart rate (perhaps during competition).
ENG -63 Continue Use of the target zone When the heart rate is out of the zone during the measurement, the wristwatch sounds an alarm and notifies the rider by flashing . The heart rate zone is se- lected from 5 predetermined zones. For a training aiming at a heart rate of 140 to 160 bpm, select HR.
ENG -64 If a malfunction occurs, check the following before contacting CatEye or your retailer for repair or service. Trouble on display T rouble Check Items Remedy Display motion becomes slower .
ENG -65 Continue T rouble Check Items Remedy Cannot measure the cur - rent speed or cadence Is the battery for the speed sensor empty? Replace it with a new battery (CR2032). Did you perform the format - ting operation? The sensor ID was deleted by formatting.
ENG -66 Trouble on operation T rouble Check Items Remedy Pressing and holding the MODE1 or MODE2 button does not turn on a light. Check whether the Setup mode is displayed (page 48). The backlight does not turn on in the Setup mode. Check whether lights up on the wristwatch screen.
ENG -67 Continue Water resistance of the wristwatch The wristwatch is water-resistant up to 100 feet (30 meters). Refer to the following for proper use. Before aquatic and outdoor activities Caution: The heart rate sensor and speed sensor are waterproof, but should not be used for • underwater activities.
ENG -68 Wristwatch Battery life: Approx. 1 year when used for 1 hour per day. When the remaining battery capacity is low, * lights up. 1. Open the battery cover of the wristwatch using a coin, etc. Turn the inner cover to the open position using 2. a coin, remove this, and insert a new lithium battery (CR2430) with the (+) side up.
ENG -69 Continue Regularly perform the following instructions to prolong the life of your Q3. Regularly check that the positions of the magnets and sensors are correct, and they • are secured firmly.
ENG -70 M1 Flow of the screen Average speed Average heart rate Average cadence Elapsed time ALARM Setting the alarm clock Current speed Heart rate Cadence T raining function* SOUND Setting sound Curre.
ENG -71 Continue MODE2 MODE1 Maximum speed Maximum heart rate Maximum cadence Elapsed time TIRE Setting the tire circumference Current speed Heart rate Cadence Lap timer AUTO MODE Setting the auto-mod.
ENG -72 Measurement function Upper display Current speed 0.0 (4.0) – 150.0 km/h 0.0 (3.0) – 93.0 mph] (For 27-inch tire size) Average speed 0.0 – 150.0 km/h [0.0 – 93.0 mph] Maximum speed 0.0 (4.0) – 150.0 km/h [0.0 (3.0) – 93.0 mph] Average lap speed 0.
ENG -73 Continue Interval Upper display (current speed, average speed, and maximum speed) Middle display (current heart rate, average heart rate, maximum heart rate, current cadence, average cadence, .
ENG -74 CATEYE Web Site (http://www.cateye.com) For warranty service you must register your product. Please register your Q3 as soon as possible. CATEYE provides regular technical support and new product information as much as possible. Please register on-line through the “Support” page on our web site.
ENG -75 Continue Index 2.4 GHz digital wireless system ......... 6 A Accessories ........................................ 7 Alarm clock mode ............................ 23 Automatic recognition of the speed sensor ID .................................
ENG -76 Setting sound ( SOUND ) ................... 58 Settings to be changed from your PC ... 46 Setting the alarm clock ( ALARM ) ..... 50 Setting the auto-mode ( AUTO MODE ) .................................. 57 Setting the clock/date ( CLOCK DATE ) .
Please fill with 7-digits numbers marked on the battery cover of main unit. リストウォッチ裏面のバッテリーカバーに記載の7桁の数字をご記入ください。 Veuillez indiquer le numéro à 7 chiffres indiqué sur le couvercle de la pile de l’unité principale.
066600820 CA TEYE C0., LTD 2-8-25 , KUWAZU, HIGASHI SUMIYOSHI-KU, OSAKA, JAP AN 546-0041 www.cateye.com www.cateye.co.jp CY200ENG 1.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Cateye Q3 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Cateye Q3 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Cateye Q3, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Cateye Q3 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Cateye Q3, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Cateye Q3.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Cateye Q3. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Cateye Q3 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
