Manuel d'utilisation / d'entretien du produit WX6000 du fabricant Canon
Aller à la page of 239
Installation Connecting to a Network Maintenance Appendix Index Appendix Installation Manual Projecting an Image Safety Instructions Before Use Table of Contents Setting Functions from Menus Useful Fu.
2 How to Use This Manual Thank you for pu rchasing a Canon p rojector. The WUX5000 / WUX4000 / WX6000 / SX6000 Multimedia Projector (herei nafter referred to as “the projector”) is a high-performance proj ector that is capable of proje cting a high- resolution computer screen and high-q uality digital image on a large screen.
3 How to Use This Manual COPYRIGHT NOTICE Please note that enlarging or reducing t he size of an image for commercial pur- poses or public presentation may infringe on the legally protec ted copyright or the copyright holder of the original material. About Trademarks • Ethernet is a registered trademark of Xerox Corporation.
4 Quick Reference Guide This Quick Refe rence Guide will help you find func tions that make full use of the projector and are useful for producing an attractive presentation, etc.
5 Table of Contents Table of Contents How to Use This Manu al ............. .......................... ...................... ......................... ........ 2 Quick Reference Guide ..................... ......................... ..................
Table of Contents 6 Connecting to AV Equipment ................................................. .................................................. 52 ■ Connecting to Digital Video Output Terminal (Digital Connection) ...............................
7 Table of Contents Table of Contents Setting Functions from Menus......... ...... .......... ................ ................ ............... 87 How to Use Menus ......................... ......................... .......................... ........
Table of Contents 8 Reducing the Lamp Brightness (WUX4000) .......................................................................... 119 Resetting the Image Adjustment Setting s ........................................................................
9 Table of Contents Table of Contents ■ Install facing in the corr ect direction ............................... .............................................. 148 Installation Procedure............ ......................... ........................
Table of Contents 10 Controlling the Projector from a Computer .................... ......................... .............. 188 Error Mail ........................ ....................... ......................... ......................... ..........
11 Table of Contents Table of Contents ■ When projecting on a 16:10 screen in the aspect ratio of the connected device......... 215 ■ When projecting on a 16:9 sc reen in the aspect ratio of the connected device ........... 216 Displayed Test Patterns.
12 Safety Instructions Before installing and operating the pr ojector , read this manual thoroughly . This projector pr ovides many con venient feat ures and functions. Operating the projector properly enables you to manage those features and maintain it in good condition for many years to come.
13 Safety Instructions Safety Instructions Safety Precautions WARNING: • THIS APPARATUS MUST BE GROUNDED. • TO REDUCE THE RISK OF FIRE OR EL ECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. • This projector pr oduces intense li ght from t he pr ojection le ns.
Safety Instructions 14 ■ READ AND KEEP THIS OWNER’S MA NUAL FOR LATER USE. All the safety and operating instru ctions shou ld be read before beginning to operate the pr oduct. Read all of the instruc tions given here and reta in them for later u se.
15 Safety Instructions Safety Instructions Never push objects of any kin d into this pr ojector through cabinet slots as they may touch dangerous voltage points or short out pa rts that cou ld result in a fire or electric shock. Never spill liquid of any kind onto the projector .
Safety Instructions 16 AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requir ements fo r use in the countr y you purchased it.
17 Safety Instructions Safety Instructions Federal Communication Commission Notice Multimedia Projector , Model: WUX5000 / WUX4 000 / WX6000 / SX6000 This device complies with Part 15 of the FCC Ru les.
Safety Instructions 18 Precautions for Use As this section contains i mportant safety-related infor mation, be sure to read the following carefully beforehand in order to use your pr ojector correctly and safely .
19 Safety Instructions Safety Instructions Precautions for Installation Pay attention to the following po ints regar di ng the power source, power plug and han- dling of the connector . Failure to do so could re sult in a fir e, electri c shock or personal injury .
Safety Instructions 20 Pay attention to the foll owing points regarding installation and ha ndling of the projector . Failure to do so may cause a fire, electric shock or personal injur y . • D o not move the projector unti l you have switched o ff the power , removed the power plug from the power outlet and unplugged any other cables.
21 Safety Instructions Safety Instructions Precautions on the lamp Pay attention to the following points regardin g installation and han dling of the projector . • Do not place any heavy objects on top of the projector or sit / stand on it. Pay par tic- ular attention to prevent small children fr om doing so.
Safety Instructions 22 Precautions for the batterie s of the remote control When handling the lamp, pay attention to the following points. • Be sure not to handle the lamp immediately after it has been used . B e su re to swit ch off the power and wait for approximately 1 ho ur for the lamp and the projector to cool down sufficiently .
23 Safety Instructions Safety Instructions For Safe Use Pay attention to the following points when ca rrying or transpor ting the projector . • Th is projector is a pr ec ision instrument. Do no t knock it over or subject it to impacts. Doing so may cause a malfunction.
Safety Instructions 24 Pay attention to the following points wh en installi ng or using the projector . • Be sure to install the projector in a location where the air intake and exhaust vents are separated fr om th e wall by more than 50 cm (1.6').
Installation Connecting to a Network Maintenance Appendix Index Appendix Installation Manual Projecting an Image Safety Instructions Before Use Table of Contents Setting Functions from Menus User’s .
26 Supplied Accessories Check that the following accessories h ave been supplied with the projector . Remote control Batteries for the remote control Power cord (1.8 m) For the U.S.A. and Canada User’ s Manual / Installation Manual (CD-ROM) W arranty Card Important Infor mation VGA cable (1.
27 Supplied Accessories Before Use ■ Installing Remote Control Batteries • If buttons on the remote control ar e inoperative when you attempt to operate the projector , replace the batteries with new ones. • Do not drop the remote control or subject it to impact.
Supplied Accessories 28 Pay attention to the following p oints when handling the bat- teries. Failing to d o so could result in a fire or personal injury. • Do not heat, short ci rcuit or disassemble the ba tteries, or place them in a fire. • Do not attempt to recharge the batteries that are includ ed with the remo te control.
29 Before Use Preparing the Remote Control ■ Remote Control Operating Range The remote control is an infrar ed type. Point it at the infrared remote receiver on the fr on t or rear of the pr ojec tor to operate it. • Use the remote control within a distance of approximately 8 m (26.
Preparing the Remote Control 30 ■ When a remote control is connect ed using a ca ble (WX600 0 / SX6000) The remote control for WX6000 / SX6000 (RS-RC05) can be used connected to the pro- jector with a cable. Use a cable with a Ø3.5 mm stereo mini jack (not included).
31 Before Use Part Names Main Unit (The illustration sho ws WUX5000.) ■ Front Side Terminals and con- nectors Infrared remote receiver ( P29 ) Lens unit Air intake vent Power cord connector ( P56 ) Side control ( P38 ) Air filter ( P193 ) Anti-theft lock hole An anti-theft wire cable (not included) can b e connected.
Part Names 32 ■ Rear Side ■ Bottom Side Exhaust vent Infrared remote receiver ( P29 ) Do not block the air exhaust . Doing so may cause a malf unc- tion.
33 Part Names Before Use Mounting the Projector on the Ceiling Y ou can mount the pr oje ctor on the ceiling. The ceiling attachment (part No.: RS-CL11) is required in or der to mount the projector on the ceiling. Depending on the installation environment, an extension pipe (part No.
Part Names 34 Remote Control The projector can be operated using buttons on the remote control or the side contr ol on the main unit. The RS-RC04 remote control is included with WUX5000 / WUX4000 a nd the RS-RC05 remote control is included with WX60 00 / SX6000.
Part Names 35 Before Use LENS-SHIFT button ( P74 ) Moves the lens up, down, left, or right. [] , [] , [] / [] b u t t o n s : M o v e t h e l e n s . INPUT button ( P60 ) Switches the input signal. ZOOM button ( P71 ) Adjusts the image size. [ ] / [ ] buttons: Increase the image size.
Part Names 36 ■ RS-RC05 POWER button ( P56 , P80 ) T ur ns the projector on or off. IMAGE button ( P79 ) Switches the image mode (image quality). Pointer buttons ( P90 ) Selects the upper , lower , left or right item in the menu. Per forms remote control channel settings when the remote control is used via the infrared transmitter .
Part Names 37 Before Use SHIFT button ( P74 ) Moves the lens up, down, left or right. [] / [] / [] / [] buttons: Move the lens. INPUT button ( P60 ) Switches the input signal. MENU button ( P89 ) Displays the menu on the screen. Perfor ms remote control channel settings when the remote control is used via the infrared transmitter .
Part Names 38 Side Control (1) LED indicators ( P39 ) The projector status is sho wn by the LED indi cators (off / on / flashing). For indica tor status, r efer to page 39 . (2) POWER button ( P56 , P80 ) T ur ns the projector on or off. (3) MENU button ( P88 , P89 ) Displays a menu on the screen.
39 Part Names Before Use ■ LED Indicator Displays The LED indicators flash or illuminate to in dicate the oper ating status of the projector . * Either the [POWER ON] or [ST AND BY] indicator illuminates, depending on the power status.
Part Names 40 Input Terminal (1) LAN port ( P166 ) Connects the LAN cabl e. Used to connect the projector to a network. (2) ANALOG PC / COMPONENT IN terminal ( /COMPONENT IN) ( P47 , P53 ) Receives the analog PC signal (Analog PC). A component cable can be used to receive the component image signal (Componen t).
41 Part Names Before Use (1) LAN port ( P166 ) Connects the LAN cable. Used to connect the projector to a network. (2) ANALOG PC-1 / COMPONENT IN terminal ( /COMPONENT IN) ( P47 , P53 ) Receives the analog PC signal (Analog PC-1). A component cable can be used to receiv e the compon ent image signal (Component).
42.
43 MULTIMEDIA PROJECTOR User’s Manual (Operation).
44.
Safety Instructions Before Use Table of Contents Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus User’s Manual Installation Connecting to a Network .
46 Steps for Connecting the Projector and Projecting an Image Connecting the Projector to Equipment ( P162 ) Starting Projection ( P56 ) Selecting an Input Signal ( P59 ) Adjusting the Image ( P61 ) Make the following adjustments.
47 User’s Manual Projectin g an Ima g e Connecting the Projector Connecting the Proj ector to a Computer Connect the projector to the computer . A digital connection ( P5 0 ) is recommended when projecting an image in high quality . When using a computer with an HDMI output ter minal, a digital conne ction ( P51 ) can be made using an HDMI cable.
Connecting the Projector 48 Connecting with VGA-DVI cable (Input signal type: [Analog PC-2] P59 ) • Use a VGA cable in which all pins are connected . If the cable is a type in which all pins are not connected, the image may not be correctly displayed.
49 Connecting the Projector User’s Manual Projectin g an Ima g e Connecting with a BNC cable (Input signal type: [Analog PC] (WUX5000 / WUX400 0), [Analog PC-1] (WX6000 / SX6000) P59 ) • A signal with a dot clock higher than 162 MHz cannot be projected.
Connecting the Projector 50 ■ Connecting to DVI Monitor Output Terminal (Digital Connection) Connecting with a DVI cable (Input signal type: [DVI-D] (Digital PC) – P59 ) • Use an audio cable without a built-in resistor . Using an au dio cable with a built-in resistor will reduce the audio volume.
51 Connecting the Projector User’s Manual Projectin g an Ima g e ■ Connecting with a HDMI Cable (Input signal type: [HDMI] – P5 9 ) ■ Outp utting A udio to Sp eakers It is possible to output audio from the projected images to amplified speakers.
Connecting the Projector 52 Connecting to AV Equipment Connect the projector and A V equipment. The description provided here is one example. For more detailed information, refer to the manual for the connected A V equipment.
53 Connecting the Projector User’s Manual Projectin g an Ima g e ■ Connecting to Analog Video Output Terminal (Analog Connect ion) Connecting with a compone nt cable (Input signal type: [Component.
Connecting the Projector 54 • Use an audio cable without a built-in resistor . Using an au dio cable with a built-in resistor will reduce the audio volume.
55 Connecting the Projector User’s Manual Projectin g an Ima g e ■ Outp utting A udio to Sp eakers It is possible to output audio from the proj ected images to A V equipment or amplified speakers. Use an audio cable without a built-in resistor . Us ing an audio cable with a built-in resistor will reduce the audio volume.
56 Starting Projection 1 Check the connection between the projecto r and the computer or AV eq uipment. ( P52 – P55 ) 2 Connect the power cord and make sure that the [STAND BY] indicator is lit (red). 3 Press the POWER button. The [POWER] indicator flashes green, and then stops flashing and remains lit.
57 Starting Projection User’s Manual Projectin g an Ima g e 4 Turn on the co mputer or AV equipment power. ■ When the Language Selection Screen Appears A window appears when the projector is turned on for the first ti me. Y ou can select a lan- guage to be used by the projector for displaying menus and messages in the window .
Starting Projection 58 ■ When the Password Input Screen Appe ars If you have set a password, the Passwor d inpu t sc reen appears. Enter your passwor d. ( P128 ) ■ When “No signal” Appears With a notebook computer , the user must tur n on the external moni tor output.
59 User’s Manual Projectin g an Ima g e Selecting an Input Signal (INPUT) Select the input signal in the [Input] menu whe n you want to project a digital PC or A V equipment signal, or to switch between inputs when multiple computers or multiple sets of A V equipment are connected.
Selecting an Input Signal (INPUT) 60 ■ Selecting an Input Signal 1 Press the INPUT button to display the win dow shown below. The currently active input signal is mark ed with a circle and highlighted in orange. An input signal that is ready for projection is displayed in white.
61 User’s Manual Projectin g an Ima g e Adjusting the Image Setting the Display Reso lution of the Computer Based on the maximum resolution of the project or , set the display resolution of the com- puter to the re so lution closest to the outpu t signal resolution of the projector .
Adjusting the Image 62 ■ Mac OS X 1 Open the Apple Menu and select [System Preferences]. 2 In the [System Preferences] window, click the [Displays] icon to display the Display window. 3 Select the [Display] t ab and select the res- olution closest to the maximu m output sig- nal resolution of the computer from the [Resolutions] list.
63 Adjusting the Image User’s Manual Projectin g an Ima g e Selecting Screen Aspect and Aspect Select an optimum aspect ratio of the pr ojected image (screen aspect) or a n optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection to make best use of the screen size.
Adjusting the Image 64 2 Use the [ ] / [ ] buttons to select the [D isplay se ttings] tab (WUX5000 / WUX4000 ) or [Install settings] (W X6000 / SX6000).
65 Adjusting the Image User’s Manual Projectin g an Ima g e 4 Use the [] / [ ] buttons to select the desired conten ts. Screen aspect compatibility for each model of projector is as follows. : Compatible : Not compatible WUX5000 WUX4000 WX6000 SX6000 16:10 16:9 4:3 16:10 D.
Adjusting the Image 66 16:10 Select this when you use a screen with aspe ct ratio of 16:10. Also, select this when you project an image on a wall. Y ou can correct keystone distor tion with this mode. ( P7 6 ) 16:9 Select this when you use a screen with aspe ct ratio of 16:9.
67 Adjusting the Image User’s Manual Projectin g an Ima g e Moving Image with 16:9 D. Image Shift / 16:10 D. Image Shift (SX6000) 16:10 D. image shift cannot be used for the WUX5000, WUX4000 and WX6000. 1 For the WUX5000 / WUX4000, when the screen as pect is [16:9 D.
Adjusting the Image 68 Moving Image with 4:3 D. Image Shift (WUX500 0 / WUX4000 / WX6000) 4:3 D image shift cannot be used for SX6000. 1 For the WUX5000 / WUX4000, when the screen aspect is [4:3 D. image shift], if the D.SHIFT/KEYSTONE button is pressed, the screen below on the ri ght is displayed.
69 Adjusting the Image User’s Manual Projectin g an Ima g e Resetting the Image Shif t Perform the following steps to r eset the image shift ad justment. Press the D.SHIFT/KEYSTONE button (WUX5000 / WUX4000), twice to displ ay the [D. image shift reset] window .
Adjusting the Image 70 How to Select an Aspect Ratio Press the ASPECT bu tton on the remote control and select an appropriate aspect ratio. Pr ess the ASPECT button to change the aspect ratio type. For mor e details about aspect ratios, r efer to page 207 .
71 Adjusting the Image User’s Manual Projectin g an Ima g e Adjusting the Image Size The size of the projected image can be adjusted by pressing the ZOOM button on the remote control or the LENS button on the projector .
Adjusting the Image 72 2 Press the pointer buttons to adjust the image size. 3 When the desired image size is selected, pre ss the OK button or the ZOOM button.
73 Adjusting the Image User’s Manual Projectin g an Ima g e Adjusting the Focus T o adjust the focus, press the FOCUS button on the remote con trol or the LENS button on the projector . For the projection distances of the lens unit, refer to page 156 .
Adjusting the Image 74 Adjusting the Image Position T o adjust the screen position up , down, left, or right, press the LENS-SHIFT button (WUX5000 / WUX4000) or SHIFT button (WX6000 / SX6000) on the remote contr ol, or th e LENS button on the projector .
75 Adjusting the Image User’s Manual Projectin g an Ima g e 2 Press the pointer buttons to adjust. 3 When the desi red position is reached, press the OK bu tton. ■ Resetting the Position The lens position after movement with the lens shift function is not return ed when the power is turned off.
Adjusting the Image 76 Adjusting Keystone Distortion The D.SHIFT/KEYSTONE button (WUX5000 / WUX4000) or KEYSTONE bu tton (WX6000 / SX6000) can be used to correct keystone distor tion. 1 Press the D.SHIFT/KEYSTONE button (W UX5000 / WUX4000) or KEYSTONE button (WX6000 / SX6000) to display the window in the center illustration be low.
77 Adjusting the Image User’s Manual Projectin g an Ima g e 2 Press the pointer buttons to adjust. 3 When keystone distortion has been corrected, press the OK button. ■ Resetting the Keystone Adjus t ment Perform the following steps to reset the keystone adj u stment.
78 Selecting an Image Mode Y ou can select an image mode to suit the projected image. In each image mode, you can fur ther adjust the brightne ss, contrast, sharpness, gamma, color adjustment, advanced adjustme nt, and lamp mode (WUX4000).
79 Selecting an Image Mode User’s Manual Projectin g an Ima g e ■ How to Select an Image Mod e Press the IMAGE button on the r emote control to select. The image mode chan ges each time the IMAGE button is pressed. (The displayed image modes vary depe nding on the selected input signal.
80 Turning Off the Projector 1 Press the POWER button to display the window sh own below. When this window is displayed, press the POWER button again to turn off the power . The lamp goes off, the [ST AND BY] indicator star ts flashing in red and the cooling process starts.
Useful Functions Available During a Presentation User’s Manual Safety Instructions Before Use Table of Contents Appendix Index Appendix Installation Connecting to a Network Projecting an Image Setti.
82 Useful Functions Available Duri ng a Presentation Temporarily Blacking Out an Image Press the BLANK button to black out the image. Press the BLANK button again to show the image. • Y ou can set the scr een state while b lack- ing out the image in the men u.
83 Useful Functions Availa ble During a Presentation User’s Manual Useful Functions Available During a Presentation Adjusting the Volume Press the VOL button. The following screen appears. • Y ou can also adjust the volume level wit h the [] / [] buttons of the pr ojector .
Useful Functions Availa ble During a Presentation 84 Zooming an Image Press the + D.ZOOM button to e nlarge a part of the image. Press the - D.ZOOM button to reduce the image size. • The magnification appears on the scree n. Y o u can move the area you want to zoom in on by usin g the [] / [] / [] / [] buttons.
85 Useful Functions Availa ble During a Presentation User’s Manual Useful Functions Available During a Presentation Showing the Elapsed Time Press the P-TIMER button to start counting. • The elapsed time is disp layed on the lower right cor ner of the s creen.
86.
Projecting an Image Safety Instructions Before Use Table of Contents Useful Functions Available During a Presentation Setting Functions from Menus User’s Manual Installation Connecting to a Network .
88 How to Use Menus Use the menus to set the operation of th e projector in detail. ■ Menu Configuration The menu screen is divided in to 5 tabs as show n below . Input Signal Types for which a Menu Item is Displayed Differ ent menu items are displayed for different input signal types.
How to Use Menus 89 User’s Manual Settin g Functions from Menus The menu screen is divided into 6 tabs as shown below . Contents of menu Menu items [Input setting s] tab Y ou ca n set the type of signal or the method of projection of the images input.
How to Use Menus 90 ■ Basic Menu Operatio ns The menus shown be low are for WUX5000. 1 Press the [MENU] button to display the menu window. 2 Use the [] / [] buttons to select a tab . • If the tab position is not high lighted in orange, use the [ ] / [ ] buttons to move the highlight to the top.
How to Use Menus 91 User’s Manual Settin g Functions from Menus 3 Use the [] / [] buttons to select an item. Remote control Projector Remote control.
How to Use Menus 92 4 Select contents. How to select the contents va ries depending on the item. Selecting from a list Example: Aspect Adjusting with the [ ] / [ ] butto ns Example: Contrast Selecting.
93 User’s Manual Settin g Functions from Menus Setting Display Status Selecting an Image Pro- jection Mode [Aspect] You can select a proj ection mode corre- sponding to the aspect ratio of the image.
Setting Display Status 94 Automatic Display Adjustment [Auto PC] Automatically adjusts display position mis- alignment and screen fli ckering. The adjusted result i s stored in the memory. MENU > [Input settings] > [Auto PC] Press the OK button to accept you r setting and then press the MENU button or EXIT button (WX6000 / SX6000).
95 Setting Display Status User’s Manual Settin g Functions from Menus Selecting an Input Signal Type (Component) [Input signal select] You can select the proper component sig- nal type if the video image from AV equip- ment is not projected correctly.
Setting Display Status 96 Adjust Input Signal Type (Analog PC) Tracking [Tracking] You can fine-tune the ti ming for genera ting an image from the image signal.
97 Setting Display Status User’s Manual Settin g Functions from Menus Adjust Input Signal Type (Analog PC) Vertical Posi- tion [Vertical position] You can adjust the vertical position of the screen when the projec ted i mage is shifted in the vertical direction.
Setting Display Status 98 Adjust Input Signal Type (Analog PC) Vertical Pixels [Vertical pixels] You can adjust the numb er of the pi xels in the vertical direction if the scre en is too long or too short in the vertical direction.
.
Setting Display Status 100 Select HDMI Over Scan [HDMI over scan] You can select this as required when you project visual software using an HDMI sig- nal.
101 Setting Display Status User’s Manual Settin g Functions from Menus Performing Progressive Processing [Progressive] You can select this as required when the images have low resolution.
Setting Display Status 102 Selecting a Menu Position [Menu position] You can change the position of menus dis- played . MENU > [Display settings] > [Menu position] MENU > [Install settings] > [On screen] > [Menu position] Move the menu to the desired posi tion with the [ ] / [ ] / [ ] / [ ] buttons.
103 Setting Display Status User’s Manual Settin g Functions from Menus Correcting the Screen Color [Screen color] You can adjust the color quality of the images projected according to the color of the projection screen.
Setting Display Status 104 Reversing Projection [Image flip H/V] Select this setting if you want to hang the projector from the ceili ng or project an image from behind th e screen.
105 Setting Display Status User’s Manual Settin g Functions from Menus • T o hang the projector fr om the ceiling, use the optional bracke t. Contact the Canon Customer Support Center for more detailed i nfor mation. • If you flip the image, the keystone di stor- tion adjustment will be reset.
Setting Display Status 106 Screen When Blank [Screen when blank] You can display a black or blu e screen and temporarily blank out th e projected image by pressing the BLANK button on the remote control.
107 Setting Display Status User’s Manual Settin g Functions from Menus Selecting Aspect Ratio of Screen [Screen aspect] Select according to th e aspect ratio of the projection screen.
Setting Display Status 108 Adjusting Keystone Dis- tortion [Keystone adjustment] Corrects keystone distortion. MENU > [Install settings] > [Keystone adjust- ment] If the OK button or [ ] button is pressed, the Keystone adjustment screen is dis- played.
109 User’s Manual Settin g Functions from Menus Selecting an Image Quality Image Adjustment [Image mode] You can select an image mo de suitable for the projected image. ( P78 ) You can also select it with the IMAGE but- ton on the remote control. ( P79 ) MENU > [Image adjustment] > [Image mode] (The screen is for the WUX5000.
Selecting an Image Quality 110 (The screen is for the WUX5000.) Saving the Desired Image Quality [Create profile] Up to 5 combinations of image quality set- tings can be stored. The stored image quality can be selected as an image mode. MENU > [Image adjustment] > [Create Profile] (The screen is for the WUX5000.
111 Selecting an Image Quality User’s Manual Settin g Functions from Menus When the desired save destination is selected, press the OK button to accept your setting and then press the [Re turn] button. • The saved settings consist of the brightness, contract, sharpness, gamma, color adjust- ment, advanced adjustment, and lamp mode (WUX4000).
Selecting an Image Quality 112 Adjusting the Contrast [Contrast] You can adjust the co ntrast of images. Adjust the difference between the l ight and dark parts of the image to produce an image with emphasized contrast or an image that is soft. MENU > [Image adjustment] > [Contrast] (The screen is for the WUX5000.
113 Selecting an Image Quality User’s Manual Settin g Functions from Menus Adjusting the Sharp ness [Sharpness] You can adjust th e sharpness of image s.
Selecting an Image Quality 114 setting and then press the MENU button or EXIT button (WX6000 / SX6000). • The adjustment you have made is stor ed as adjusted va lues for the input sign als and image mode of the curr ent projection. • More detailed ad justment is possible by using the detailed gamma corr ection ( P118 ).
115 Selecting an Image Quality User’s Manual Settin g Functions from Menus Correcting the Image According to the Ambi- ent Light [Ambient light] You can correct and more effectively project an image acco rding to the ambient light on the screen.
Selecting an Image Quality 116 Noise Reduction [Noise reduction] You can reduce image noise. MENU > [Image adjustment] > [Advanced adjustment] > [Noise reduction] Press the OK button to accept you r setting and then press the MENU button or EXIT button (WX6000 / SX6000).
117 Selecting an Image Quality User’s Manual Settin g Functions from Menus Memory Color Correction [Mem. color correct] This function produces beautiful ski n tones, blues, and other colors. MENU > [Image adjustment] > [Advanced adjustment] > [Mem.
Selecting an Image Quality 118 Detailed Gamma Correc- tion [Fine-Tune Gamma] The four gamma curves (white, red, green , blue) can be adj usted. When the whi te curve is adjusted, the adjustment is also applied to the other three colors. This func- tion allows more fine-tuned ga mma correc- tion.
119 Selecting an Image Quality User’s Manual Settin g Functions from Menus Reducing the Lamp Brightness [Lamp mode] Reducing the lamp brightness reduces power consumption and cooling fan noise. For the WUX4000, yo u can also enable or disable this mode wi th the LAMP button on the remote control.
120 Setting Various Functions Selecting the Power Man- agement Mode [Power management mode] You can turn off the lamp or p rojector auto- matically in order to save power when the projector is not in use.
121 Setting Various Functions User’s Manual Settin g Functions from Menus Skip the POWER Button Operation [Direct power on] You can turn on the p rojector by connect- ing the power cable without pressin g the POWER button.
Setting Various Functions 122 Enabling / Disabling the Beep [Beep] You can select whether a beep sounds or not when you operate the projector. MENU > [System settings] > [Beep] MENU > [System settings] > [Beep] Press the OK button to accept you r setting and then press the MENU button or EXIT button (WX6000 / SX6000).
123 Setting Various Functions User’s Manual Settin g Functions from Menus Prohibiting Operations [Key lock] You can lock the pr ojector to prevent its operation from either the main unit or remote control.
Setting Various Functions 124 Main Unit and Remote Control Channel Settings [Remote control] When using multiple projectors at the same time (maximum 4), you can assign a different channel to each remo te control so that each operates independently. For the WX6000 / SX6000, set this when performing infrared ope rations.
125 Setting Various Functions User’s Manual Settin g Functions from Menus Selecting a Display Language [Language] You can select the la nguage in which the menus are displayed . MENU > [System settings] > [Language] Use the [ ] / [ ] / [ ] / [ ] buttons to select the menu language, then press the OK button.
Setting Various Functions 126 Showing / Hiding the Guide Screen [Guide] You can select whether to show or hide the guide screen which explai ns operations.
127 Setting Various Functions User’s Manual Settin g Functions from Menus Showing / Hiding the Input Status [Show Input Status] You can select whether the signal status is displayed on the screen whe n there is no signal or when making signal settings.
Setting Various Functions 128 Setting a Password [Password settings] Disables the projector unless the correct password is entered. MENU > [System settings] > [Other settings] > [Password set.
129 Setting Various Functions User’s Manual Settin g Functions from Menus Registering a Password [Register password] You can register a password for starting projection.
Setting Various Functions 130 Prohibiting Operation of the Lens [Lens Ctrl Lock] You can lock lens-related button opera- tions. MENU > [System settings] > [Other settings] > [Lens Ctrl Lock] Press the OK button to accept you r setting and then press the MENU button.
131 Setting Various Functions User’s Manual Settin g Functions from Menus Lens Shift Reset [Lens shift Reset] Resets the lens shift ( P74 ) setting to the standard position.
Setting Various Functions 132 Extending the Menu Dis- play Time [Menu display time] The setting for the menu disp lay time can be extended from the normal 10 or 30 sec- onds to 3 minutes.
133 Setting Various Functions User’s Manual Settin g Functions from Menus Showing / Hidi ng the High Temperature Warning Icon [Overheat Warning Display] You can select whether or not to display the [High temperature warning] icon when the temperature inside the projector has increased and is appro aching the overheat temperat ure.
Setting Various Functions 134 Reducing Flickering [Deflicker] This function adjusts the image display in order to reduce flickering in the projected image. MENU > [System settings] > [Other settings] > [Deflicker] • When deflicker is performed, the image adjustment scr een is projected for appr ox- imately 20 seconds.
135 Setting Various Functions User’s Manual Settin g Functions from Menus Lamp Warning Display [Lamp warning display] A message that advises you to ch ange the lamp can be set to display when the lamp has been used for the specified period of time.
Setting Various Functions 136 Select [Lamp counter] and press the OK button to display the lamp counter . Select [Reset] and press the OK button. Select [OK] on the screen for confir mation and press the OK button to reset the lamp counter . Press the MENU button or EXIT button (WX6000 / SX6000).
137 Setting Various Functions User’s Manual Settin g Functions from Menus Filter Warning Display [Filter warning display] A message advising you to perform clean- ing can be set to display when the filter needs cleaning.
Setting Various Functions 138 Displaying Test Pattern [Test pattern] A test pattern fo r checking the res olution and color when insta lling the projector can be displayed. MENU > [Install settings] > [Test pattern] Press the OK button to accept you r setting and then press the MENU button or EXIT button (WX6000 / SX6000).
139 Setting Various Functions User’s Manual Settin g Functions from Menus Selecting Audio In Termi- nal [Audio in terminal select] You can select the audio in terminal that is used for each input sign al (HDMI, Digital PC, Analog PC-1, Ana log PC-2, Compo- nent).
Setting Various Functions 140 Resetting to the Default Setting [Factory defaults] You can reset the menu item settings and restore the system sett ings to the factory defaults.
141 User’s Manual Settin g Functions from Menus Checking Projector Information [Information] You can check information about the signal types of the images projected and other information. Information shown * Not displayed when network functions a re [Of f].
142.
143 MULTIMEDIA PROJECTOR Installation Manual (Installation and Maintenance) Do not attempt installati on yourself. Be sure to request installation from a qualified technician or contact the Canon Cust omer Support Center.
144.
Projecting an Image Safety Instructions Before Use Table of Contents Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Inde.
146 Installation Precautions Precautions When Ca rrying the Projector Installation Precautions Be sure to read on page 12 – 24 . Pay attention to the foll owing when inst alling the projector. Precautions When Carrying an d Transporting the Pro- jector Prepare the projector as descr ibed below before carrying it.
147 Installation Precautions Installation Manual Installation ■ Do Not Use in the Following Environm ents • Do not install the projector in a humid or dust y location or a position where there is a lot of oily smoke or cigarette smoke. Optical parts such as the lens a nd mirror may be stained, resulting in poor picture quality .
Installation Precautions 148 ■ When using mounted on the ceiling ■ Instal l facing in t he correct direction When the projector is us ed mounted on the ceiling or installed in a high location, it is nec- essary to periodically clean the air intak e and exhaust vents, and t he area around the air fil- ter.
149 Installation Manual Installation Installation Procedure Selecting the Projec tion Method and Installation Location ( P150 ) Installing / Removing the Lens Unit ( P151 ) Setting Up the Projector ( .
150 Selecting the Projection Met hod and Installation Location ■ Ceiling Mounting or Rear Projection Y ou can mount the projecto r on the ceiling (c eiling mounting) with it tur ned upside down or place it behind the screen (r ea r proj ection) if you use a translucent screen.
151 Installation Manual Installation Installing / Removing the Lens Unit ■ Installing the Lens Unit 1 Use a Phillips-head screwdriver and loosen the lamp cove r screw, then open the lamp cover. The lamp cover screw is attached to the la mp cover and designed to prevent it fr om falling off.
Installing / Removi ng the Lens Unit 152 2 Loosen the cosmetic panel screw, then sli de th e cosmetic panel toward the rear to remove it. The cosmetic pa nel screw is attached to the cosme tic panel and designed to prevent it from falling off. 3 In order to prevent damage, close the la mp cover and temporarily fasten the screw.
153 Installing / Removi ng the Lens Unit Installation Manual Installation 5 Then turn the projector back over and remove the sleeve. 6 Referring to the following illustration, insert t he le ns connector of the lens unit i nto the front right side of the proj ector slowly until it contacts the end.
Installing / Removi ng the Lens Unit 154 8 Insert the projector lens cable into the connector until a click sound is heard. 9 Reinstall the sleeve, cosmetic panel, and lamp cover in their original positio ns.
155 Installing / Removi ng the Lens Unit Installation Manual Installation ■ Removi ng the Lens Unit 1 Perform steps 1 to 5 on pages 151 – 153 and remove the sleeve. 2 Disconnect the lens cable from the lens conne ctor. 3 Fix the lens cable as shown in the illustration and loosen the 4 screws to remove th e lens unit.
156 Setting Up the Projector ■ Positioning the Projector in Front of the Screen Place the projector in front of the screen. ■ Relationship Between Image Si ze and Projecting Distance The projected image size is determined by the distan ce between the projector and th e screen (pr oj ection distance) as well as the zo om.
157 Setting Up the Projector Installation Manual Installation WUX5000 / WUX4000 Lens unit Diagonal when 16:10 Image size (cm) Projection distance m (feet) Distance from optical axis when projection is.
Setting Up the Projector 158 WX6000 Lens unit Diagonal when 16:10 Image size (cm) Projection di stance m (feet) Distance from optical axis when projec tion is perpendicul ar to screen* (c m) 16:10 1 6:9 4:3 16 :10 Width Height Width H eight Width He ight Wide limit Tele limit H1 H2 Standard Zoom Lens RS-IL01ST 40 86 54 86 48 72 54 1.
159 Setting Up the Projector Installation Manual Installation SX6000 Lens unit Diagonal when 4:3 Image size (cm) Projection distance m (feet) Distance from optical axis when projection is perpendicula.
Setting Up the Projector 160 ■ Lens Shift Funct ion The projector includes a le ns shift function. Operation of the buttons sl ides the lens up, down, left, and right, moving the image posi tion. For the function operations, refer to page 74 . The amount of lens shift is indicated as a percentage r elative to the image height and width.
161 Setting Up the Projector Installation Manual Installation Area where lens movement is not possible With the Standard Zoom Lens, Long Zoom Le ns and Ultra Long Zoom Lens, when the shift exceeds 44% in the upward direction, the amount of available shif t in the left / right directions decr eases.
162 Connecting to AV Equipment ■ Connectable Equipment and Input Termina ls Computer ( P49 ) AV equipment ( P52 ) Digital video camera* ( P52 ) Computer ( P47 , P49 ) AV equipment ( P53 ) ( P166 ) ( P47 , P49 , P53 ) ( P50 ) ( P51 , P55 ) Computer ( P51 ) * Select play- back mode be- fore connecting.
163 Connecting to AV Equipment Installation Manual Installation Computer ( P49 ) AV equipment ( P52 ) Digital video camera* ( P52 ) Computer ( P48 , P49 ) AV equipment ( P54 ) ( P166 ) ( P48 , P49 , P.
Connecting to AV Equipment 164 ■ Connection Terminal and Connectio n Cable Input signal Supported projectors Input terminal Types of connection cables HDMI WUX5000 WUX4000 WX6000 SX6000 HDMI cable (.
Safety Instructions Table of Contents Connecting to a Network Maintenance Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation User.
166 Preparing the Remote Control If the projector is connected to a network, pr o jector error notification mails can be received and the projector can be controlled via a computer . Settings related to the net- work connection can be made from either the projector side ( P172 ) or computer side ( P177 ).
167 Preparing the Remote Control Installation Manual Connecting to a Networ k Setting an IP Address Following is an expla nation of how to set th e PC IP addr ess fo r each operating system. ■ Windows 7 1 From the PC [Start] menu, select [Control Panel].
Preparing the Remote Control 168 ■ Windows Vista 1 From the PC [Start] menu , select [Control Panel]. 2 Click on [View networ k status and tasks]. 3 From the menu on the left side of the window , click on [Manage network connections]. 4 Right-click [Local Area Connecti on], and open [Properties].
169 Preparing the Remote Control Installation Manual Connecting to a Networ k ■ Windows XP 1 From the PC [Start] menu, select [Control Panel]. 2 Select [Network and Internet Conne ctions] and open [Netwo rk Connections]. 3 Right-click [Local Area Connect ion], an d open [Properties].
Preparing the Remote Control 170 ■ Mac OS X 1 Open the Apple Menu and sele ct [System Preferen ces]. 2 In the System Preferences window, click [Network] to display the Network window. 3 Select [Built-in Ethernet] and click the [TCP/I P] tab. Make a note of the original net- work settings (IP address, subnet mask, router, DNS server, etc.
171 Installation Manual Connecting to a Networ k Network Settings on the Projector From the pr oj ector menus screen, network settings can be configured in the [Network Setting] tab. For the menu operations, ref e r t o pa ge 88 . (The screen is for the WUX5000 / WUX4000.
Network Settings on the Projector 172 Turning the Network Function On / Off You can turn the projector network function on or off. Power can be saved by turning the function [Off]. MENU > [Network Setting] > [Network function] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000).
173 Network Settings on the Projector Installation Manual Connecting to a Networ k Setting a Network Password You can set whethe r or not a password is required in order to change the projector network settings.
Network Settings on the Projector 174 Turning the PJLink Function On / Off You can turn the PJLink network function on or off. When the fu nction is turned on, control is possible via the LAN using com- mands that meet PJLink standards.
175 Network Settings on the Projector Installation Manual Connecting to a Networ k Turning DHCP Function On / Off You can turn the projector D HCP function on or off. MENU > [Network Setting] > [DHCP] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000).
Network Settings on the Projector 176 Initializing Network Settings You can initialize the projector network set- tings. MENU > [Network Setting] > [Network setting initialization] When [Network setting initialization ] is selected , the window shown below appears.
177 Installation Manual Connecting to a Networ k Configuring the Network From the Computer ■ Displaying and Configuring the Network Conf iguration Screen The web browser scr een sho wn below is for the WUX4000. 1 Turn on the co mputer and projecto r.
Configuring the Networ k From the Computer 178 The following infor mation is displayed. *1 WUX5000 / WX6000 / SX6000 *2 WUX4000 4 To config ure, click [Settings] .
179 Configuring the Networ k From the Computer Installation Manual Connecting to a Networ k 5 Select the function to set from the menu (1 ), then enter the setting in the displa yed field (2) and click [OK] (3). 6 A confirmation window appears. Check the contents and if they are correct, click [Apply].
Configuring the Networ k From the Computer 180 ■ Resetting to Factory De faults 1 Perform steps 1 - 3 on page 177 to display the setting window. 2 Click [Initialize].
181 Configuring the Networ k From the Computer Installation Manual Connecting to a Networ k The error meanings ar e as shown below . Error Meaning Input error A setting outside the valid range was set on the setting screen. Password setting error The set password and confirmation p assword did not match.
182 Setting Up the Network ■ Setting Basic Informatio n [Network] From [Network] in the settin gs window , you can log into the web screen and set basic network infor mation.
183 Setting Up the Network Installation Manual Connecting to a Networ k ■ Setting Up Email [Mail] From [Mail] in the settings window , you can set the items necessary to send error mails and test mails. For the setting procedure, r efer to page 177 .
Setting Up the Network 184 ■ Mail Authe ntication Sett ings [Mail auth ] From [Mail auth] in the settings window , you can co nfigure the settings for authentica- tion of mail that is sent when an error occurs. For the settin g procedure, refer to page 177 .
185 Setting Up the Network Installation Manual Connecting to a Networ k ■ Sending a Test Mail [Send test mail] From [Send test mail] in the settings wind ow , you can send a test m ail to the mail address that was set in [Mail ]. The settin gs cannot be cha nged from this window .
Setting Up the Network 186 ■ Setting Projector Informa tion [Projector info.] From [Pr ojector info.] in the settings wi ndow , you can set the names an d location names which are used to identify projectors when multiple projectors are installed on the network.
187 Setting Up the Network Installation Manual Connecting to a Networ k ■ Settin g PJLink [PJLi nk] From [PJLink] in the setting window , you can set the PJLink functions whic h are the standard for pr oj ector management on a netw ork. For the settin g procedur e , refer to page 177 .
188 Controlling the Projector from a Computer When the pr ojector is connected to a network, it is possible to control the projector fr om a computer via the network. 1 Turn on the computer and projector. 2 Launch a web browser, e nter “http://(proje ctor IP address)” in the address bar, and press the Enter key.
Controlling the Projec tor from a Computer 189 Installation Manual Connecting to a Networ k 5 The projector control screen appears. The projector can be control led from this screen. 6 When the operations are finished, click [Ba ck to top] to return the initial web screen.
190 Error Mail The messages shown in the following error list are sent when an error occurs in the pr o - jector . Error list * F or details, contact the Canon Customer Suppor t Center .
Projecting an Image Safety Instructions Before Use Table of Contents Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appe.
192 Cleaning the Projector Clean the projector frequently to pr even t dust from settling on the sur face. A dirty lens may ruin the quality of the projected image.
193 Installation Manual Maintenance Cleaning and Replacing the Air Filter Replacing the Air Filter Follow the procedure below when r eplaci ng the air filter . 1 Turn off the projector power and remove the powe r plug. 2 Hook your finger onto the handle of the air filter on the side of the proje ctor, and pull the air filter ou t to remove i t.
Cleaning and Replaci ng the Air Filter 194 5 Securely insert the ai r filter all the way into the proje ctor. Cleaning the Air Filter The air filter protects the lens and mirror inside the projector from dust and dirt.
195 Installation Manual Maintenance Replacing the Lamp When the usage time of the la mp exceeds a cer tain amount of time, the following mes- sage (two types) is displayed for 10 second s every time the projector is turned on. 2,700 hours to less than 3,000 hours Prepar e a new lamp whe n this screen is displayed.
Replacing the Lamp 196 Replacement Lamp This projector uses the following lamps. Lamp part No.: RS-LP06 (WUX4000) RS-LP07 (WUX5000 / WX6000 / SX6000) Contact the Canon Customer Suppor t Center when purchasing a replacement lamp. Replacing the Lamp 1 Turn off the projector power and remove the power plug.
197 Replacing the Lamp Installation Manual Maintenance 3 Loosen the 3 screws on the insid e of the lamp unit, then slowly pull out the lamp unit in the direction of the arrow. Even when the screws are loosened, t hey will not fall of f the lamp un it.
Replacing the Lamp 198 7 Select [Reset] - [OK] to reset the lamp counter. • It is recommended that you also replace the air filter when you replace the lamp. • Contact the Canon Custome r Support Center for fur ther infor mation. • Replacement air filter product number: RS-FL01 (The screen is for the WUX5000 / WUX4000.
199 MULTIMEDIA PROJECTOR Appendix.
200.
Projecting an Image Safety Instructions Table of Contents Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index .
202 Troubleshooting LED Indicator Meanings When there is a pr oblem with the projector , t he LED indicator on the si de of the projector illuminates or flashes continuou sly after the projector is turned off. • Wait until the cooling fan stops and disconnect the power plug from the electrical outlet before dealing with the pr oblem.
203 Troubleshooting A pp endix Other Information Symptoms and Solutions ■ You Cannot Turn on the Projector ■ You Cannot Project an Image from the Projector W ARNING (only) flashes 6 times repeat- edly . Faulty lens connector Disconnect the lens connector which joins t he lens unit and projector .
Troubleshooting 204 ■ There is no Sound Connection with the input terminal has not been perfor med correctly . Check whether the A V equipment is connected to the p ro- jector input termin al correctly . ( P47 ) No input signal type has been selected for the connected A V equipment.
205 Troubleshooting A pp endix Other Information ■ The Projected Image Is Blurred ■ You Cannot Project an Image Appropriate ly ■ The Projector Power Turns Off Cause Countermeasure The image is out of focus. Adjust the focus. ( P73 ) The distance to the screen is too short.
Troubleshooting 206 ■ You Cannot Operat e the Remote Control If the above causes cannot be identified, the projector may be dama ged. Contact the Canon Customer Support Center as so on as possible. The lamp has broken (or there is a lamp malfunction).
207 A pp endix Other Information Relationship between Aspe ct and Screen Aspect This section describes the relationship between screen aspect ( P63 ) and aspect ( P6 9 ). T o project an image on the whole screen, sel ect the most appropriate screen aspect ratio and aspect according to the aspect ratio of the screen and input signal type.
Relationship between Asp ect and Screen Aspect 208 ■ When the image is projected on a 16 :9 screen ■ When the image is projected on a 4: 3 screen Aspect ratio of connected devi ce Screen aspect setting ( P63 ) Aspect setti ng ( P69 ) Screen i mage (16:10) 1920 x 1200 1440 x 900 1280 x 800 [16:9] [16:9 D.
209 Relationship between As pect and Screen Aspect A pp endix Other Information ■ When projecting on a 16:10 screen in the asp ect ratio of the connected device ■ When projecting on a 16:9 screen .
Relationship between Asp ect and Screen Aspect 210 ■ When projecting on a 4:3 screen in the aspect ratio of the connected device WX6000 ■ When the image is projected on a 16 :10 screen Aspect ratio of connected devi ce Screen aspect setting ( P63 ) Aspect setti ng ( P69 ) Screen i mage (16:10) 1920 x 1200 1440 x 900 1280 x 800 [4:3] [4:3 D.
211 Relationship between As pect and Screen Aspect A pp endix Other Information ■ When the image is projected on a 16:9 screen ■ When the image is projected on a 4:3 screen Aspect rati o of connecte d device Screen asp ect sett ing ( P63 ) Aspect setting ( P69 ) Screen image (16:10) 1920 x 1200 1440 x 900 1280 x 800 [16:9] [16:9 D.
Relationship between Asp ect and Screen Aspect 212 ■ When projecting on a 16:10 screen in the a spect ratio of the connecte d device ■ When projecting on a 16:9 screen in the as pect ratio of the .
213 Relationship between As pect and Screen Aspect A pp endix Other Information ■ When projecting on a 4:3 screen in the aspec t ratio of the connected device SX6000 ■ When the image is projected .
Relationship between Asp ect and Screen Aspect 214 ■ When the image is projected on a 16 :10 screen ■ When the image is projected on a 16 :9 screen Aspect ratio of connected devi ce Screen aspect setting ( P63 ) Aspect setti ng ( P69 ) Screen i mage (4:3) 1600 x 1200 1400 x 1050 640 x 480 [16:10] [16:10 D.
215 Relationship between As pect and Screen Aspect A pp endix Other Information ■ When projecting on a 4:3 screen in the aspec t ratio of the connected device ■ When projecting on a 16:10 screen i.
Relationship between Asp ect and Screen Aspect 216 ■ When projecting on a 16:9 screen in the as pect ratio of the connected device Aspect ratio of connected devi ce Screen aspect setting ( P63 ) Aspect setti ng ( P69 ) Screen i mage (4:3) 1600 x 1200 1400 x 1050 640 x 480 [16:9] [16:9 D.
217 A pp endix Other Information Displayed Test Patterns If using WX6000 / SX6000 The test patter n can be displayed by pressi ng the [TEST P A TTERN] bu tton. Use th is when there is no image signal, etc. While the test patter n is displayed, you can use the [ ] / [ ] buttons to change to a differ- ent test patter n.
218 Supported Signal Types This projector supports the followi ng signal types. If your computer or A V equipment is compatib le with any o ne of these signal types, the projector’ s Auto PC function selects the input signal type to project a n image appropri- ately .
219 A pp endix Other Information Product Specifications ■ Projector * 1 When using a Standard Zoom Lens (RS-IL01ST). V aries depending on the type of lens unit. * 2 When lamp mode (WUX4000) is set to [Normal]. * 99.99% or mor e of the LCD panel pixels are effective.
Product Specifications 220 * 1 When using a Standa rd Zoom Lens (RS-IL01ST). V aries depending on the type of lens unit. * 99.99% or more of the LCD panel p ixels are effective. During projection , 0.01% or le ss of pixels m ay stay lit or unlit due to the char- acteristics of the LCD pane l .
221 Product Specifications A pp endix Other Information ■ Remote control ■ Specification of Each Lens Unit (Option) For details about the amount of lens shift, refer to page 160 . *: WUX5000 / WUX4000 T ype RS-RC04 RS-RC05 Power supply DC 3.0V , using two AAA-size batter- ies DC 3.
Product Specifications 222 For details abo ut the amount of lens shi ft, refer to page 160 . *: WUX5000 / WUX4000 Name Short Fixed Lens Ultra Long Zoom Lens Model number RS-IL03WF RS-IL04UL External View Focal length 12.8 mm (0.5'') 5 3.6 - 105.
223 Product Specifications A pp endix Other Information ■ External View ■ ANALOG PC (WUX5000 / WUX4000) , ANALOG PC-1 (WX6000 / SX6000) / COMPONENT IN Terminal This term inal is used as a computer ANALOG PC input or COMPONENT input terminal. Use a D-sub computer cable for connec tion.
Product Specifications 224 ■ Service Port (CON TROL) Pin assignment Communication fo rmat Communication mode : RS-232-C, asynch ronous, half-duplex communication Communication speed : 19200bps Chara.
225 Product Specifications A pp endix Other Information Image mode Standard IMAGE=ST ANDARD<CR> 49h 4Dh 41h 47h 45h 3Dh 53h 5 4h 41h 4Eh 44h 41h 52h 44h 0Dh Presentation IMAGE=PRESENT A TION<.
Product Specifications 226 Blank Blank On BLANK=ON<CR> 4 2h 4Ch 41h 4Eh 4Bh 3Dh 4 Fh 4Eh 0Dh Blank Of f BLANK=OFF<CR> 42h 4Ch 41h 4Eh 4Bh 3Dh 4Fh 46h 46h 0Dh Blank acqui- sition GET BLANK&.
227 Product Specifications A pp endix Other Information.
228 Index Numerics 6-axis color adjust ..... ......................... . 117 A Adjusting Keystone Disto r tion .............. 76 Adjusting the focus .............. ................. 73 Adjusting the V olume ......................... ... 83 Air filter .
229 Index A pp endix Index Image Mode (Image Quality) ................ 78 Information ............... ............... 88, 89, 141 INPUT ............ ......................... ............... 60 Input settings (WX6000 / SX6000) ........ 89 Input signal select .
Index 230 V V er tical pixels ....................... ................. 98 V er tical Position ........... ......................... 97 VOL .......... ......................... .................... 83 W W ARNING indicator ...................... 38, 202 Z ZOOM .
231 Option • Installing / Remo ving the Lens Unit It is possible to use replace the lens unit . Regardi ng installation and replacement of t he lens unit, con- tact a qualified technician or the Canon Customer Support Center for further information.
232 Menu Configuration Display settings Menu Aspect Digital PC / Analog PC P93 Auto * Full 16 : 9 4 : 3 Tr u e s i z e HDMI Auto * Full 16 : 9 4 : 3 Zoom Tr u e s i z e Component Auto * 16 : 9 4 : 3 Z.
233 Menu Configuration Image Adjustment Menu Factory default settings for *1, *2 and *3 are se t accord- ing to the following conditions. *1: • For Analo g PC, Digital PC or HDMI (when [HDMI In] is [Computer]), the facto r y default is [Off]. • For Component, and HDMI (when [HDMI In] is [Auto]), the facto r y default is [On].
Menu Configuration 234 System Settings Menu Network Setting Menu Information Menu * : Factory defaults (setting after reset) Power management mode Off * P120 Standby Exit Direct power on Off * P121 On.
235 Menu Configuration Input Settings Menu Aspect Digital PC / Analog PC-1 / 2 / HDMI (when [HDMI In] is [PC]) P93 Auto * 16:10 16:9 4:3 Tr u e s i z e HDMI (when [HDMI In] is [Auto]) /Component Auto .
Menu Configuration 236 Image Adjustment Menu Image mode COMMON P109 Standa rd * Photo/sRGB User 1 - 5 (when cr eating profile) Digital PC / Analog PC-1/2 / HDMI (when [HDMI In] is [Computer]) P109 Pre.
237 Menu Configuration Install settings Menu *1 - *5: Factory default setti ngs are set according to the following conditions. *1: • For Analog PC-1/2, Digital PC or HDMI (when [HDMI In] is [Computer]), the factory default is [Off]. • For Component, and HDMI (when [HDMI In] is [Auto]), the f actor y default is [On].
Menu Configuration 238 System Settings Menu Network Setting Menu Information Menu * : Factory defaults (setting af ter reset) Power management mode Off * P120 Standby Exit Direct power on Off * P121 O.
239 Menu Configuration.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Canon WX6000 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Canon WX6000 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Canon WX6000, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Canon WX6000 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Canon WX6000, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Canon WX6000.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Canon WX6000. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Canon WX6000 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
