Manuel d'utilisation / d'entretien du produit optura300 du fabricant Canon
Aller à la page of 167
Digital Video Camcorder Instruction Manual Camescope vidéo numérique Manuel d’instruction Videocámara digital Manual de Instrucciones English Françai s Español NTSC PUB.
2 Introduction E Important Usage Instructions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Digital Video Camcorder , OPTURA300 systems This device complies with Part 15 of the FCC Rules.
3 Introduction E IMPOR T ANT SAFETY INSTRUCTIONS In these safety instructions the word “product” refers to the Canon Digital Video Camcorder OPTURA300 A and all its accessories. 1. Read Instructions — All the safety and operating instructions should be read before the product is operated.
4 Introduction E 14. Lightning — For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods of time, disconnect it from the wall outlet and disconnect the antenna. This will prevent damage to the product due to lightning and power -line surges.
5 Introduction E Reference Guide The following manuals are supplied with the camcorder: ❍ Digital Video Camcorder OPTURA300 Instruction Manual This manual explains the camcorder operations from basic video recording to the use of the full range of features.
6 Introduction E T able of Contents Introduction Reference Guide ..............................................................................................................5 Thank Y ou for Choosing a Canon ..........................................
7 Introduction Setting the White Balance ..........................................................................................80 Playback Magnifying the Image .......................................................................................
8 Introduction Conventions Used in This Manual Operating Modes Available functions depend upon the operating mode. It is indicated as follows: : Function can be used in this mode. : Function cannot be used in this mode. Other Symbols and References ❍ : Reference page number .
9 Introduction E Thank Y ou for Choosing a Canon The Canon OPTURA300 provides a full range of options and functions. We recommend reading this manual thoroughly before you use the camcorder . It will help you to become more familiar with your camcorder , and learn how to operate it properly .
10 Introduction E Introducing the OPTURA300 The OPTURA300 incorporates a 2 megapixel CCD, allowing recording of high-resolution still images on a memory card. (T ape: 1.23 megapixels) Stabilizes your recordings even in long telephoto shots. Y ou can keep on shooting in dark places with the Night and Super Night mode.
11 Introduction E Components Guide OPTURA300 P U S H DV IN/OUT terminal (p. 88) USB terminal (p. 130, 135) AV IN/OUT terminal (p. 39) / (phones) terminal (p. 38, 74) ( L I N E - I N ) R E C P A U S E CARD STILL/ MOVIE REC SEARCH CARD MIX/ SLIDE SHOW CARD Card access indicator CARD MIX button (p.
12 Introduction E Program AE Easy recording CAMERA OFF PLAY(VCR) NETWORK* b Using a memory card Using a tape Diopter adjustment lever (p. 20) Viewfinder (p. 20) Grip belt (p. 20) MIC terminal (p. 73) Selector dial (p. 42) POWER indicator (p. 27) Start/Stop button (p.
13 Introduction E Terminal cover Remote sensor (p. 23) Tally lamp (p. 50) Assist lamp (White LED) (p. 56, 60) S-video IN/OUT terminal (p. 39) Tripod socket (p. 35) AUDIO LEVEL button (p. 72) PHOTO button (p. 53, 104) Stereo microphone (p. 72) Zoom lever (p.
14 Introduction E Zoom buttons (p. 29) MIX BALANCE button (p. 98) PHOTO button (p. 53, 104) SEARCH SELECT button (p. 85) 12bit AUDIO OUT button (p. 98) D. EFFECTS (Digital effects) button (p. 65) CARD STILL/MOVIE button (p. 117) Digital effects ON/OFF button (p.
15 Mastering the Basics E Using a Household Power Source Y ou can operate the camcorder from a household power source using the supplied power adapter . The power adapter converts current from a power outlet (100-240 V AC, 50/60 Hz) to the DC current used by the camcorder .
16 Mastering the Basics E Attaching and Charging the Batter y Pack Charge the battery pack with the supplied power adapter before you use the camcorder for the first time and subsequently when the message “CHANGE THE BA TTERY P ACK” appears. 1. T urn the POWER switch to OFF .
17 Mastering the Basics Charging, Recording and Playback Time Below times are approximate and vary according to the charging, recording or playback conditions. Charging Time • Charge the battery pack in temperatures between 41º F and 104º F (5º C and 40º C).
How much power is left? The battery symbols indicate the charge status of the battery pack. When the battery pack is empty , "CHANGE THE BA TTERY P ACK" appears for 4 seconds and starts flashing in red. The battery charge indicators are not constant – they vary according to the condition under which battery pack and camcorder are used.
19 Mastering the Basics E Installing the Backup Battery The backup battery allows the camcorder to retain date, time and other camcorder settings while the power source is disconnected. Power the camcorder from a household power source or with a battery pack when replacing the backup battery to retain the setting.
20 Mastering the Basics E Preparing the Camcor der Adjusting the Viewfinder (Diopter Adjustment) 1. T urn on the camcorder and keep the LCD panel closed. 2. Adjust the diopter adjustment lever . Do not leave the viewfinder exposed to direct sunlight as it may melt (due to concentration of light by the lens).
21 Mastering the Basics E Loading a Cassette Use only videocassettes marked with the D logo. Loading and Unloading 1. Slide and hold the OPEN/EJECT switch and open the cassette compartment cover . The cassette compartment opens automatically . 2. Load/unload the cassette.
22 Mastering the Basics E ❍ Do not interfere with the cassette compartment while it is opening or closing automatically or attempt to close the cover until the cassette compartment has fully retracted. ❍ Be careful not to get your fingers caught in the cassette compartment cover .
23 Mastering the Basics E Using the Wireless Contr oller Y ou can operate the camcorder with the supplied wireless controller from a distance of up to 16 feet (5 m).
24 Mastering the Basics E Setting the Time Zone, Date and Time Set the time zone, date and time when you first start using your camcorder . Install the backup battery before you begin ( 19). Setting the Time Zone/Daylight Saving Time 1. Press the MENU button to open the menu.
25 Mastering the Basics E ❍ Once you have set time zone, date and time, you do not need to reset the clock each time you travel to another time zone. Just set the time zone to the one of your destination, and the camcorder automatically adjusts the clock.
26 Mastering the Basics E 2. T urn the selector dial to select [SYSTEM] and press the selector dial. 3. T urn the selector dial to select [D/TIME SET] and press the selector dial. The year display starts to flash. 4. T urn the selector dial to select the year , and press the selector dial.
27 Mastering the Basics E Recording Movies on a T ape Y ou can use the LCD screen or the viewfinder when recording. Before Y ou Begin Recording Make a test recording first to check if the camcorder operates correctly . Before you make important recordings, clean the video heads ( 152).
28 Mastering the Basics E When Y ou Have Finished Recording 1. T urn the POWER switch to OFF . 2. Close the LCD panel. 3. Replace the lens cap. 4. Unload the cassette. 5. Disconnect the power source. When recor ding outdoors or through a window , do not leave LCD screen, viewfinder or lens exposed to direct sunlight as it may cause damage.
29 Mastering the Basics E Zooming The camcorder’ s zoom lens allows you to choose the best picture angle for your recordings. The camcorder automatically switches between optical zooming and digital zooming. Image resolution is slightly lower with the digital zoom.
30 Mastering the Basics E ❍ Keep at least 3.3 ft. (1 m) to the subject. At wide-angle, you can focus on a subject as close as 0.39 in. (1 cm). ❍ A zoom indicator appears for 4 seconds. It extends in light blue when the digital zoom is set to 40 × , and extends further in dark blue when set to 200 × .
31 Mastering the Basics E Using the LCD Screen 1. Push the OPEN button at the LCD panel and open the LCD panel. The LCD screen switches on and the viewfinder switches off.
32 Mastering the Basics E Adjusting the Brightness of the LCD Screen 1. Press the MENU button to open the menu. 2. T urn the selector dial to select [DISPLA Y SET UP] and press the selector dial. 3. T urn the selector dial to select [BRIGHTNESS] and press the selector dial.
33 Mastering the Basics E 1. Press the MENU button to open the menu. 2. T urn the selector dial to select [DISPLA Y SET UP] and press the selector dial. 3. T urn the selector dial to select [LCD MIRROR] and press the selector dial. 4. T urn the selector dial to select [OFF].
34 Mastering the Basics E Searching and Reviewing when Recor ding Record Review In record pause mode, this function allows you to review the last few seconds of your recording to check if it has been recorded properly . Press and r elease the c (recor d review) button.
Tips for Making Better Videos Holding the Camcorder For maximum stability , grip the camcorder in your right hand and keep your right elbow pressed against your body . If necessary , support the camcorder with your left hand. Be careful that your fingers do not touch the microphone or lens.
36 Mastering the Basics E Playing Back a T ape When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker . The built-in speaker is monaural. Use headphones for stereo sound or when using the viewfinder for playback.
37 Mastering the Basics E Special Playback Modes Special playback modes (except of playback pause and fast/rewind playback) can only be operated with the wireless controller . e / a (Playback Pause) T o pause playback, press the e / a button. Press the e / a button to resume playback.
38 Mastering the Basics E Playing Back with the Built-in Speaker/Headphones ❍ When using the built-in speaker , make sure that “ H ” is not displayed on the screen. When using the headphones, make sur e that “ H ” is displayed. Change the setting as necessary ( 74).
39 Mastering the Basics E Playing Back on a TV Screen Y ou can connect the camcorder to a TV or VCR to play back your recordings on a TV screen. ❍ Make sure that “ H ” is not displayed on the scr een. If “ H ” is displayed, change the setting ( 74).
40 Mastering the Basics E 3. Connect the STV-250N Ster eo V ideo Cable to the camcorder’ s A V terminal and the audio terminals of the TV/VCR. Connect the white plug to the white AUDIO terminal L (left), and the red plug to the red AUDIO terminal R (right).
41 Mastering the Basics E Selecting the Audio Output Channel Y ou can select the output channels when playing back a tape with audio recorded on two channels. 1. Press the MENU button to open the menu. 2. T urn the selector dial to select [AUDIO SET UP] and press the selector dial.
42 Using the Full Range of Features E Menus and Settings Many of the camcorder’ s advanced functions are selected from menus that appear on the screen. Selecting Menus and Settings 1. Set the camcorder to the correct operating mode. 2. Press the MENU button to open the menu.
43 Using the Full Range of Features E Submenu Menu Item Setting Options CARD MIX MIX TYPE CARD CHROMA , CARD LUMI., 125 CAM. CHROMA, C. ANIMATION ANIMAT. TYPE CORNER , STRAIGHT, RANDOM 125 MIX LEVEL 125 CAMERA SET UP SHUTTER AUTO , 1/60, 1/100, 1/250, 1/500, 1/1000, 78 1/2000 D.
44 Using the Full Range of Features E Submenu Menu Item Setting Options MY CAMERA S-UP SOUND OFF, DEFAULT , MY SOUND1, MY SOUND2 49 SHTR SOUND OFF, DEFAULT , MY SOUND1, MY SOUND2 49 OPER.
45 Using the Full Range of Features E PLA Y (VCR) Menu (VCR MENU) CARD CAMERA CARD CAMERA PLA Y (VCR) CAMERA Submenu Menu Item Setting Options VCR SET UP REC MODE SP, LP 52 AV/PHONES AV , PHONES H 74 AV DV OUT ON, OFF 93 AUDIO SET UP OUTPUT CH L/R , L/L, R/R 41 AUDIO DUB.
46 Using the Full Range of Features E CARD CAMERA Menu (C. CAM. MENU) CARD PLA Y (VCR) CARD CAMERA PLA Y (VCR) CAMERA Submenu Menu Item Setting Options CAMERA SET UP SHUTTER AUTO , 1/60, 1/100, 1/250 78 D.ZOOM OFF , 40 × 29 WHITE BAL. AUTO , SET W , INDOOR T , OUTDOOR U 81 DRIVE MODE CONT.
47 Using the Full Range of Features E CARD PLA Y (VCR) Menu (C.PLA Y MENU) CARD PLA Y (VCR) CARD CAMERA PLA Y (VCR) CAMERA Submenu Menu Item Setting Options CARD COPY [ ] CANCEL , EXECUTE 128 OPERATI.
48 Using the Full Range of Features E Changing the Remote Sensor Mode T wo remote sensor modes and an off setting are available to prevent interference from other Canon wireless controllers being used nearby . T urning the Remote Sensor Off Open the menu and select [SYSTEM].
49 Using the Full Range of Features E Customizing the Camcorder Y ou can personalize your camcorder by customizing the start-up image and the sound it makes for start-up, shutter , operation and self-timer (collectively called the My Camera settings).
50 Using the Full Range of Features E Other Camcorder Settings Beep Y ou will hear a beep upon camcorder operations such as power on/off, start/stop, self- timer countdown, automatic shut-off, and unusual conditions of the camcorder . The beep will not be recorded.
51 Using the Full Range of Features E ❍ The 16:9 mode is an electronically pr ocessed effect. ❍ The 16:9 mode cannot be selected in the Easy Recording mode. ❍ The multi-image screen, simultaneous r ecording on a memory car d and card mix cannot be used when [16:9] is set to [NORMAL] or [HIGH-RES.
52 Using the Full Range of Features E Changing the Recording Mode (SP/LP) Y ou can choose from SP (standard play) and LP (long play). LP extends the tape usage by 1.5 times. ❍ T apes recorded in LP mode cannot be used for audio dubbing ( 96) or A V insert ( 94).
53 Using the Full Range of Features E Recording Still Images on the T ape Starting your recording with a still image allows you to easily locate the beginning of the recording with the Photo Search function ( 85). Y ou can also record still images on a memory card while recording movies on a tape ( 105).
54 Using the Full Range of Features E During Recording 1. Press the PHOTO button fully . • The camcorder r ecords the still image for approx. 6 seconds. During this time, the camcorder displays the still image and keeps recor ding the sound. • The camcorder r eturns to record pause mode.
55 Using the Full Range of Features E Using the Built-in Flash Y ou can use the built-in flash for recording still images. 1. Press the (flash) button. • The setting changes with each press of the button. • The symbol of the selected flash mode appears on the screen.
56 Using the Full Range of Features E ❍ The flash will not fire in the following cases: - When you lock the exposure by pr essing the EXP button in (auto) or (red-eye r eduction, auto) mode. - When the shutter speed is set to 1/2000 in CAMERA mode. However , if (flash on) is selected, the shutter speed becomes set to 1/1000 and the flash fires.
T ur ning Off the AF-Assist Lamp T o tur n off the AF-assist lamp, open the menu and select [CAMERA SET UP]. Select [AF AST LAMP], set it to [OFF] and close the menu.
58 Using the Full Range of Features E Using the Recording Pr ograms The camcorder is equipped with the Easy Recording program and several program AE modes.
59 Using the Full Range of Features E Sports Use this mode to record sports scenes (such as tennis or golf), moving objects (such as roller coasters) or when recording from a moving car . ❍ This mode is set at a high shutter speed and should therefor e be used in sufficient light.
60 Using the Full Range of Features E Night Use this mode to record in dark places. The shutter speed is adjusted automatically . It is useful when recording in places with changing light conditions (such as in amusement parks). ❍ Moving subjects may leave a trailing afterimage.
61 Using the Full Range of Features E Selecting the Program AE Mode 1. Set the program selector to Q . 2. Press the selector dial. A list of the program AE modes appears. 3. Select a mode and press the selector dial. The symbol of the mode appears on the upper left corner of the screen.
62 Using the Full Range of Features E Using Digital Effects Y ou can use the digital effects during recording and playback. Faders ( 63): Begin or end scenes with a fade to or from black.
63 Using the Full Range of Features E Faders Fade T rigger (FADE-T) Wipe (WIPE) Corner Wipe (CORNER) Jump (JUMP) Flip (FLIP) The image gradually fades in. The image gradually fades out. The image begins as a vertical line in the center and expands sideways until it fills the whole screen.
64 Using the Full Range of Features E Puzzle (PUZZLE) Zigzag (ZIGZAG) Beam (BEAM) Tide (TIDE) The image appears in 16 pieces. The pieces move around until the puzzle is solved. The image is divided into 16 pieces. The pieces move around and disappear .
65 Using the Full Range of Features E Selecting a Fader 1. In CAMERA mode, set the program selector to Q . 2. Press the DIGIT AL EFFECTS button. [D.EFFECTS | ], [F ADER], [EFFECT] and [MUL TI-S] appear . 3. Select [FADER]. 4. Select the fader option. 5.
66 Using the Full Range of Features E Effects Art (ART) The image becomes like a paint (solarization). Black and White (BLK & WHT) The image becomes black and white. Sepia (SEPIA) The image becomes monochrome with a brownish tint. Mosaic (MOSAIC) The image is blurred through enlarging the size of some pixels.
67 Using the Full Range of Features E Selecting an Effect 1. In CAMERA mode, set the program selector to Q . 2. Press the DIGIT AL EFFECTS button. [D.EFFECTS OFF], [F ADER], [EFFECT] and [MUL TI-S] appear . 3. Select [EFFECT]. 4. Select the effect. 5.
68 Using the Full Range of Features E Using the Multi-Image Screen The multi-image screen captures moving subjects in 4, 9 or 16 sequences of still images with the Image Capture feature and displays them at one time. Sound will be recorded normally . This feature can be used in CAMERA and PLA Y (VCR) mode.
69 Using the Full Range of Features E Capturing 10 . Press the ON/OFF button. • MANUAL: Images will be captured each time you pr ess the ON/OFF button. The blue frame indicating the next sequence disappears after the last image. T o cancel the last captured image, pr ess and hold the ON/OFF button.
70 Using the Full Range of Features E T ur ning Off the Image Stabilizer The image stabilizer allows you to obtain steady recordings even at telephoto.
71 Using the Full Range of Features E Recording With the Self-Timer 1. Press the (self-timer) button. “ ” appears. When recor ding movies 2. Press the start/stop button. • The camcorder starts r ecording after a 10-second countdown (2 seconds when using the wireless contr oller).
72 Using the Full Range of Features E Audio Recording Changing the Audio Mode Y ou can record sound in two audio modes—16-bit and 12-bit. The 12-bit mode records sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new sound later .
73 Using the Full Range of Features E ❍ The microphone level r esets to [AUTO] when you switch the program selector to [ . ❍ We r ecommend using headphones when manually adjusting the audio level.
74 Using the Full Range of Features E WIND SCREEN••OFF AUDIO SET UP ( 42) Wind Screen Y ou can reduce the wind noise when recording in windy places. Open the menu and select [AUDIO SET UP]. Select [WIND SCREEN], set it to [ON] and close the menu. “WS O ” appears when you turn the wind screen on.
75 Using the Full Range of Features E Adjusting the Focus Manually Autofocus may not work well on the following subjects: 1. Set the program selector to Q . 2. Adjust the zoom. When you operate the zoom after adjusting the focus, the subject may not stay in focus.
76 Using the Full Range of Features E Infinity Focus Use this function when you wish to focus on faraway subjects such as mountains or fireworks. Press the FOCUS button mor e than 3 seconds in step 3 in Adjusting the Focus Manually . “MF ∞ ” appears.
77 Using the Full Range of Features E Adjusting Exposure Manually Exposure Lock Y ou can lock the exposure when recording in situations where the lighting may change suddenly to control the brightness of the image. 1. Set the program selector to Q . 2.
78 Using the Full Range of Features E Setting the Shutter Speed In the (Auto) mode, you can adjust the shutter speed manually to make stable shots of fast moving subjects. 1. Set the program selector to Q . 2. Set the program AE mode to the (Auto) mode.
79 Using the Full Range of Features E ❍ Guidelines for Recording with High Shutter Speeds: - Outdoor sports such as golf or tennis: 1/2000 - Moving objects such as cars or roller coasters: 1/1000, 1.
80 Using the Full Range of Features E Setting the White Balance The camcorder’ s auto white balance system adjusts the colors to appear natural for different lighting conditions. However , you can use the preset modes to reproduce colors more accurately , or set a custom white balance to obtain the optimal setting.
81 Using the Full Range of Features E For T (Indoor) or U (Outdoor) Setting: 1. Set the program selector to Q . 2. Open the menu and select [CAMERA SET UP]. 3. Select [WHITE BAL.]. 4. Select [INDOOR T ] or [OUTDOOR U ]. “ T ” or “ U ” appears.
82 Using the Full Range of Features E Magnifying the Image The playback image can be magnified up to 5 times. 1. Move the zoom lever toward T . • The image is magnified by 2 times. • A frame appears indicating the position of the magnified area. • T o further enlarge the image, move the zoom lever toward T .
83 Using the Full Range of Features E Displaying the Data Code Once date and time are set, the camcorder maintains a data code containing recording date and time and other camera data such as shutter speed and exposure (f-stop). Only date and time appear when playing back a memory card.
84 Using the Full Range of Features E Selecting the Date/Time Display Combination Open the menu and select [DISPLA Y SET UP]. Select [D/TIME SEL.], set it to [DA TE] or [TIME] and close the menu. Selecting the Data Code Display Combination Open the menu and select [DISPLA Y SET UP].
85 Using the Full Range of Features E Photo Search/Date Sear ch Y ou can search for a still image recorded anywhere on the tape with the photo search function, or locate the change of the date/time zone with the date search function. 1. Press the SEARCH SELECT button to choose between photo search and date sear ch.
86 Using the Full Range of Features E Returning to a Pre-marked Position If you wish to return to a particular scene later , mark the point with the zero set memory and the tape will stop at that point when you rewind/fast forward the tape. 1. Press the ZERO SET MEMOR Y button at the point you wish to return to later .
87 Editing E Recording to a VCR or Digital V ideo Device Y ou can copy your recordings by connecting the camcorder to a VCR or a digital video device. If you connect a digital video device, you can copy recordings with virtually no generation loss in image and sound quality .
88 Editing Connecting a Digital Video Device Refer also to the instruction manual of the digital video device. E DV IN/OUT Side with an arrow Commercially available DV cable Signal flow.
89 Editing E Recording fr om Analog Video Devices (VCR, TV or Camcorder) Y ou can record videos or TV programs from a VCR or analog camcorder on the tape in the camcorder . ❍ Anomalous signals sent from the connected device may be r ecorded as anomalous picture (although it may not appear so on the scr een), or it may not be recor ded at all.
90 Editing E Recording fr om Digital Video Devices (DV Dubbing) Y ou can record from other digital video devices equipped with a DV terminal with virtually no loss in picture and sound quality . ❍ When recor ding from digital video devices, make sur e that “A V DV” is not displayed on the screen.
91 Editing Copyright Signal Certain software tapes are copyright protected. If you attempt to play back such tape, “COPYRIGHT PROTECTED PLA YBACK IS RESTRICTED” appears and you will not be able to view the contents of the tape.
92 Editing E Converting Analog Signals into Digital Signals (Analog-Digital Converter) By connecting the camcorder to a VCR or 8mm video camcorder , you can convert analog video/audio signals to digital signals and output the digital signals via the DV terminal.
93 Editing T ur ning On the Analog-Digital Converter Press the A V DV button on the wireless contr oller . OR Open the menu and select [VCR SET UP]. Select [A V DV OUT], set it to [ON] and close the menu. ❍ For normal use, set [A V DV OUT] to [OFF] (so that “AV DV” does not appear on the screen).
94 Editing E Replacing Existing Scenes (A V Inser t) Y ou can insert and replace images and audio on the tape of the camcorder with images and audio from other video devices connected via A V terminal or DV terminal. ❍ Y ou cannot insert from a TV program when the synchronized signals ar e distorted.
95 Editing Example: A V Insert from a VCR 1. Connect the camcorder to the VCR. See Playing Back on a TV Screen ( 39). 2. VCR: Load a recorded cassette. Locate the scene you wish to insert and pause playback shortly before the scene. 3. Set the camcorder to PLA Y (VCR) mode and load a recorded cassette.
96 Editing E Audio Dubbing Y ou can add sound from audio devices (AUDIO IN) or with the built-in or an external microphone (MIC. IN). ❍ Use only tapes recor ded in SP mode 12-bit audio sound with this camcorder . Audio dubbing will stop if the tape has a blank section or a section recor ded in LP mode, 16-bit or 12-bit 4-channel sound.
97 Editing E Using a Microphone ❍ When using the built-in microphone: Do not connect any cables to the microphone terminal. ❍ When using an external microphone: Connect it to the microphone terminal.
98 Editing E 7. Press the STOP 3 button on the wireless contr oller to stop dubbing. Audio device: Stop playback. Set the zero set memory at the end of the scene you wish to dub audio. The camcorder will automatically stop audio dubbing at that point.
99 Editing E Connecting to a Computer Using a DV (IEEE1394) Cable Y ou can transfer recordings to a computer equipped with a DV (IEEE1394) terminal or IEEE1394 capture board (optional software required). ❍ Operation may not work correctly depending on the softwar e and the specifications/settings of your computer .
100 Using a Memory Card E Inserting and Removing the Memor y Card Y ou can use SD Memory Cards or commercially available MultiMediaCards with this camcorder . The SD Memory Card has a protect switch for prevent accidental erasure. ❍ This camcorder is compatible with SD Memory Car ds or MultiMediaCards only .
101 Using a Memory Card E Selecting the Image Quality/Size Changing the Still Image Quality Y ou can choose between Superfine, Fine and Normal. Open the menu and select [CARD SET UP]. Select [SI QUALITY], set it to [SUPER FINE] or [NORMAL] and close the menu.
102 Using a Memory Card E ❍ The indication may not decrease even though a r ecording has been made, or may decrease by 2 images at once. ❍ All indicators are displayed in gr een when a memory card is played back. Changing the Movie Size Y ou can choose between 352 × 288 pixels and 176 × 144 pixels.
103 Using a Memory Card E T o change the setting, open the menu and select [CARD SET UP]. Select [FILE NOS.], set it to [RESET] and close the menu. CARD PLA Y (VCR) CARD CAMERA PLA Y (VCR) CAMERA FILE NOS.
104 Using a Memory Card E Recording Still Images on a Memory Car d Y ou can record still images with the camcorder , from a tape in the camcorder ( 106) or from devices connected via the DV terminal or A V terminal ( 107).
105 Using a Memory Card E 3. Press the PHOTO button fully . • F and focusing frame disappear and you hear a shutter sound. • The card access indicator flashes and the card access display appears. • The still image shown on the screen will be r ecorded on the memory card.
106 Using a Memory Card E PHOTO REC••••TAPE b CAMERA SET UP ( 42) Recording fr om a T ape in the Camcorder Y ou can record images from a tape in the camcorder as still images on a memory card. 1. Set the camcorder to PLA Y (VCR) mode. 2. Play back the tape.
107 Using a Memory Card E Recording fr om Other V ideo Devices Y ou can record images from devices connected via the S-video terminal or AV terminal (analog line-in function), or via the DV terminal as still images on a memory card. When recor ding via the A V terminal, make sure that “A V DV” is displayed on the screen.
108 Using a Memory Card E Selecting the Focusing Point The subject you wish to record is not always in the center of the screen. In the Focus- Priority mode, you can choose from one of three focusing points to automatically put the subject you wish into sharp focus.
109 Using a Memory Card E ❍ If you operate the zoom lever , press the EXP button or do not press the PHOTO button within 4 seconds, the frames other than the selected one disappear .
110 Using a Memory Card E Selecting the Drive Mode Y ou can choose between three drive modes (recording modes). Continuous Shooting Y ou can capture a quick series of still images with the continuous shooting function. 1. Set the camcorder to CARD CAMERA mode.
111 Using a Memory Card E Auto Exposure Bracketing With Auto Exposure Bracketing (AEB), the camcorder records a still image in three different exposures (dark, normal, light in 1/2 EV steps), allowing you to choose the perfect exposed shot. 1. Set the camcorder to CARD CAMERA mode.
112 Using a Memory Card E Recording Panoramic Images (Stitch Assist Mode) Y ou can shoot a series of overlapping images and merge them into one large panoramic scene using the supplied software (PhotoStitch) on a computer . When Recording in Stitch Assist Mode: PhotoStitch detects the overlapping portion of adjoining images and merges them.
113 Using a Memory Card E ❍ Compose each image so that it overlaps 30 to 50% of the adjoining image. T ry to keep the vertical misalignment within 10%. ❍ Do not include moving subject in the overlapping portion. ❍ Do not try to stitch images that include both distant and close subjects.
114 Using a Memory Card E Recording MPEG-4 Movies on a Memory Card Y ou can record MPEG-4 movies with the camcorder or from a tape in the camcorder ( 115). ❍ Do not turn off the camcorder , disconnect the power source, open the memory card cover or r emove the memory card while the car d access indicator is flashing.
115 Using a Memory Card E Recording fr om a T ape in the Camcorder Y ou can record movies from a tape in the camcorder on a memory card. 1. Set the camcorder to PLA Y (VCR) mode. 2. Play back the tape. 3. Press the start/stop button when the scene you wish to recor d appears.
116 Using a Memory Card E Playing Back a Memory Card Y ou can play back memory card images on the LCD screen, viewfinder screen, or on a connected TV screen (see Playing Back on a TV Screen 39). Y ou can display a single image, 6 at one time (index screen 117), or one after another (slide show 118).
117 Using a Memory Card E 2. Press the CARD STILL/MOVIE button. • The camcorder displays the movie playback mode. • The last recorded movie appears with the first scene as a still image. • Pressing the CARD STILL/MOVIE button takes you back to the still image playback mode.
118 Using a Memory Card E 3. Move the mark to the image you wish to view . • T ur n the selector dial up to move to the next image and down to move to the previous image. • T ur ning the selector dial up on the last image displays the next index screen.
119 Using a Memory Card E Protecting Images Y ou can protect important images from accidental erasure when displaying a single image or index screen. If a memory card is formatted, all still images and movies, even pr otected ones, will be erased permanently .
120 Using a Memory Card E Erasing Images Y ou can erase images singly or all at once. Be careful when erasing images. Erased images cannot be r ecovered. ❍ Protected images cannot be erased. ❍ When you select to erase all images, only those images in the respective playback mode (still image or movie) will be erased.
121 Using a Memory Card E Selecting Still Images for Printing (Print Or der) Y ou can select still images for printing and set the number of copies. These print order settings are compatible with the Digital Print Order Format (DPOF) standards and can be used for printing on DPOF compatible Canon printers and PictBridge-compliant printers.
122 Using a Memory Card E Erasing All Print Orders 1. Open the menu and select [CARD OPERA TIONS]. 2. Select [ PRINT ORDERS ALL ERASE]. “ERASE ALL PRINT ORDERS?”, [NO] and [YES] appears. 3. Select [YES]. All “ ” disappear . 4. Select [ b RETURN] to close the menu.
123 Using a Memory Card E Combining Images (Card Mix) Y ou can produce effects not possible with just a tape with the Card Mix function. Choose one of the sample images provided on the supplied SD Memory Card (such as picture frames, backgrounds and animations) and combine it with the live video recording.
124 Using a Memory Card E Card Luminance Key (CARD LUMI.) Combines illustrations or title with your recordings. The live video recording will appear in place of the light area of the card mix image. Y ou can create your own title or illustration by drawing on a white paper and recording it to the memory card.
125 Using a Memory Card E Selecting the Card Mix Ef fect 1. Set the program selector to Q . 2. Open the menu and select [ CARD MIX]. The card mix menu appears. 3. Select the image you wish to combine with the CARD +/– button. 4. Select [MIX TYPE]. [CARD CHROMA], [CARD LUMI.
126 Using a Memory Card E Recording with the Car d Mix Effect Movie: 1. Press the start/stop button to begin recor ding. The combined image is recor ded on the tape. 2. Press the start/stop button to end recor ding. Still Image: 1. Press the PHOTO button halfway .
127 Using a Memory Card E Copying Still Images Y ou can copy still images from tape to memory card, or from memory card to tape. ❍ All still images from the selected still image onwar d will be copied. ❍ The size of a still image copied from tape to memory car d will be 640 × 480.
128 Using a Memory Card E Copying Still Images from Memory Car d to T ape Load a cassette with enough free space, and insert a recorded memory card. Make sure that the protect tab on the cassette is set to allow recording. 1. Select the first still image you wish to copy with the CARD +/– buttons.
129 Using a Memory Card E Formatting a Memor y Card Format new memory cards, or when you get the message “CARD ERROR”. Y ou can also format a memory card to erase all images recorded on it. The camcorder formats memory cards in the Design rule for Camera File system (DCF) standard.
130 Using a Memory Card E Connecting to a Computer Using a USB Cable Y ou can download images from the memory card to a computer using the supplied USB cable.
131 Using a Memory Card E [STORAGE] When the camcorder is set to [STORAGE], it will be recognized as [Removable Disk] (USB mass storage device) by the computer . Y ou can use the camcorder like a card reader/writer and download/upload still images and movies to/from the computer without installing the provided software (e.
132 Using a Memory Card E Memory Card Infor mation Images recorded on a memory card with this camcorder can be transferred to a computer using the following products for SD Memory Cards or MultiMediaCards: PC Card Adapter: An adapter to insert a memory card into the card slot on the computer .
133 Using a Memory Card E Sample Images 27 sample images are pre-recorded on the supplied SD Memory Card: 8 card chroma key images, 5 card luminance key images, 2 camera chroma key images and 12 card animation images.
134 Using a Memory Card E The sample images recor ded on the supplied SD Memory Card ar e intended only for the personal use with this camcorder . Do not use these sample images for other purposes. If you have mistakenly erased the sample images on the supplied SD Memory Card, they can be downloaded fr om the homepage http://www .
135 Direct Printing E Printing Still Images (Direct Printing) Y ou can print still images by connecting the camcorder to a printer with Direct Print function or to a PictBridge-compliant printer . Y ou can also use the print order settings for direct printing ( 142).
136 Direct Printing E 3. Set the camcorder to CARD PLA Y (VCR) mode. W ait until the card access indicator stops flashing. 4. Connect the camcorder to the printer using the cable. appears and changes to “ ” when the printer is properly connected to the camcorder .
137 Direct Printing E ❍ Cancel Printing Press the P .SET button while “NOW PRINTING” is displayed. A confirmation dialog appears. Select [OK] and press the P .SET button. Printing stops even if it is incomplete and the paper is fed through. ❍ Printing Errors - If an error occurs during the printing pr ocess, an error message appears ( 150).
138 Direct Printing E Image Standard Prints 1 still image per page. Multiple Prints 8 copies of the same still image on one page. Borders Borderless Prints right to the edges of the page. Bordered Prints with a border. • [Multiple] can only be selected when printing on card size paper.
139 Direct Printing E Print Setting Menu 2 Paper Size Card #1*, Card #2*, Card #3*, LTR, A4 For details on paper type, refer to the Bubble Jet Printer User Guide. Borders Borderless Prints right to the edges of the page. Bordered Prints with a border.
140 Direct Printing E Selecting the Borders 2. Press the or button to select (Borders) and press the P .SET button. 3. Press the or button to select a borders option and press the P .SET button. Pressing the MENU button brings you back to the print settings menu.
141 Direct Printing E Selecting the Borders 6. Press the button to select the [BORDERS] and press the P .SET button. 7. Press the or button to select the bor ders option and press the P .SET button. Pressing the MENU button brings you back to the print settings menu.
142 Direct Printing E Printing with Print Order Settings Y ou can print still images you have selected with the Print Order function. If you wish to print more than 1 copy , set the number of copies in the print order ( 121).
143 Additional Information E About the NETWORK Mode The NETWORK mode is for use with DV Messenger version 2 (Windows XP only). Set the camcorder to NETWORK mode and connect it to the computer using a USB cable or DV (IEEE1394) cable. For details on DV Messenger version 2, refer to the DV Network Software Instruction Manual .
144 Additional Information E Screen Displays LCD Screen Displays Y ou can hide the displays on the LCD screen to have a clear screen for playback. Open the menu and select [DISPLA Y SET UP]. Select [DISPLA YS], set it to [OFF <PLA YBK>] and close the menu.
145 Additional Information E Screen Displays during Basic Recor ding/Playback indicates flashing. CAMERA mode (battery pack attached): • Remote sensor mode and audio mode disappear after a few seconds. PLA Y (VCR) mode: • Remote sensor mode and volume bar disappear after a few seconds.
146 Additional Information E PLA Y (VCR) Mode Screen Displays during Advanced Recor ding/Playback CARD MIX FADE–T 1 2 bit 16:9 1sec PHOTO WS ON 12:00 PM JAN,1.
147 Additional Information E CARD CAMERA Mode 1 2 CLOSE 0:10 12:00 PM JAN,1.2003 T W E.LOCK MF 1/250 0 S.FINE 50 352 1632 1sec A Still image quality ( 101) Movie size ( 102) Still image size ( 101) Re.
148 Additional Information E List of Messages Message Explanation You have not set the time zone, date and time. This message appears each time you turn the power on until you set the time zone, date and time. Battery pack is exhausted. Replace or charge the battery pack.
149 Additional Information E Message Explanation Memory card not is inserted into the camcorder. SD Memory Card is set for erasure prevention. Replace the card or change the position of the protect switch. No images are recorded on the memory card. A memory card error occurred.
150 Additional Information E Direct Print Related Messages Message Explanation There is a problem with the paper. Paper is not correctly inserted or there is no paper. The paper jammed during printing. Paper size has been changed between print setting and start of printing.
151 Additional Information E Maintenance Camcorder Handling Pr ecautions ❍ Do not carry the camcorder by the LCD panel or viewfinder . ❍ Do not leave the camcorder in places subject to high temperatures, such as a sun- heated car , and high humidity .
152 Additional Information E ❍ At cold temperatures, the screen may be darker than usual. This is not a malfunction. The screen returns to normal when the camcorder warms up. Video Heads ❍ When the message “HEADS DIRTY , USE CLEANING CASSETTE” appears, or when the playback picture becomes distorted, the video heads need to be cleaned.
153 Additional Information E When condensation is detected: ❍ The camcorder stops operating and the warning message “CONDENSA TION HAS BEEN DETECTED” appears for approx. 4 seconds and h starts flashing. ❍ If a cassette is loaded, the warning message “REMOVE THE CASSETTE” appears and v starts flashing.
154 Additional Information E T roubleshooting If you have a problem with your camcorder , refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Recording/Playback Problem Cause Solution Battery pack is exhausted.
155 Additional Information E Recording Playback Problem Cause Solution Camcorder is not set to CAMERA mode. Time zone, date and time are not set, or the backup battery is exhausted. Camcorder is turned off. Cassette is not loaded. Tape reached the end ( flashes on the screen).
156 Additional Information E Memory Card Operation Problem Cause Solution Memory card was not facing the correct direction. Memory card is full. Memory card is not formatted. Memory card is not inserted. File number reached maximum value. SD Memory Card is protected.
157 Additional Information E System Diagram (A vailability differs fr om area to ar ea) MultiMediaCard IFC-300PCU USB Cable PC Card Adapter USB Reader/Writer WL-D81 Wireless Controller MiniDV Video Ca.
158 Additional Information E Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accessories. Y ou can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center .
159 Additional Information E WD-H30.5 Wide-converter This lens decreases focal length by a factor of 0.7, giving you a wide perspective for indoor shots or panoramic views. • When using the assist lamp with the Wide- converter attached, the shadow of the Wide-converter may appear on the picture.
160 Additional Information E This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark.
161 Additional Information E Specifications OPTURA300 7.4 V DC 4.1 W (using viewfinder), 5.1 W (using LCD screen) EIA standard (525 lines, 60 fields) NTSC color signal 2 rotary heads, helical scanning.
162 Additional Information E Weight and dimensions are approximate. Errors and omissions excepted. Subject to change without notice. SDC-8M SD Memory Card 8 MB SD Memory Card standard 32 – 104˚F (0 – 40˚C) 1.3 × 0.94 × 0.08 in. (32 × 24 × 2.
163 Additional Information E Index 12bit audio . . . . . . . . . . . . . . . . . . 98 16:9 widescreen . . . . . . . . . . . . . . 50 6-second auto date . . . . . . . . . . . . 84 Abroad, using the camcorder . . . 153 Accessories. . . . . . . . . . . .
164 Additional Information E Menus . . . . . . . . . . . . . . . . . . . 42-47 Microphone . . . . . . . . . . . . . . . . . . 97 Microphone attenuator . . . . . . . . 73 MIC terminal . . . . . . . . . . . . . . . . . 97 Movie playback mode . . . . . .
165 Additional Information E CANON ® OPTURA300 DIGIT AL VIDEO CAMCORDER LIMITED WARRANTY The limited warranty set forth below is given by Canon U.S.A., Inc. (“CUSA”) with respect to each Canon OPTURA300 Digital Video Camcorder (“DV Camcorder”) pur chased and used in the United States.
166 Additional Information E CANON CONSUMER DIGIT AL VIDEO EQUIPMENT LIMITED WARRANTY The limited warranty set forth below is given by Canon Canada Inc.
CANON INC. U.S.A. CANON U.S.A., INC. NEW JERSEY OFFICE 100 Jamesburg Road, Jamesburg, NJ 08831 USA CANON U.S.A., INC. CHICAGO OFFICE 100 Park Blvd., Itasca, IL 60143 USA CANON U.S.A., INC. LOS ANGELES OFFICE 15955 Alton Parkway , Irvine, CA 92618 USA CANON U.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Canon optura300 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Canon optura300 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Canon optura300, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Canon optura300 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Canon optura300, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Canon optura300.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Canon optura300. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Canon optura300 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
