Manuel d'utilisation / d'entretien du produit 3035 du fabricant Cannon
Aller à la page of 216
Please read this guide before operating this product. After you finish reading this guide, store it in a safe place for future reference. ENG Network Guide Network Guide.
.
imageRUNNER 3045/3035/3030/3025 Network Guide 0 Ot¯.
The manuals for this machine are divide d as follo ws. Please refer to them f or detailed i nf ormation . The manuals supplied with optional equipme nt are included in the list bel ow . Depending on th e system configuration and product purchased, some manuals may not be needed.
• UFR II Printer Driver Installation and Instruction s UFR II Driver Guide CD-ROM • Mac OS X PS Printer Dri ver Installation and Instruction s Mac PS Driver Guide CD-ROM • Mac OS X UFR II Printe.
Chapter 1 Before Y ou Start Chapter 2 Settings Common to the Network Protocols Chapter 3 Using a TCP/IP Network Chapter 4 Using a NetWare Network (Windows) Chapter 5 Using a NetBIOS Network Chapter 6 .
v Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix How T o Use This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Symbols Used in This Manual .
vi Comm unication En vironment Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 Chapter 3 Using a TCP/IP Netwo rk TCP/IP Netwo rk Setup Pr ocedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2 Protoco l Settings .
vii W ebD A V Server Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-52 IIS for Windows 2000/2000 S erver/XP/Serv er 2003 . . . . . . . . . . . . . . . . . 3-52 Apache for Windows 2000/2000 Server/XP/Server 2003/UNIX/Linux/Mac OS X .
viii Chapter 6 Using an AppleT alk Network (Macintosh) AppleT alk Network Setup Pr ocedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2 Protoco l Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ix Thank y ou f or pur chasing the Canon imageR UNNER 3045/3035/3 030/3025. Ple ase read this manual thoroughly bef ore oper ating the product to f a miliarize yourself with its capabilities, and to mak e the most of its many functi ons. After reading this manual, store it in a saf e place f or future ref erence .
x Keys and Buttons Used in This Manual The follo wing symbols and key/b utton names are a fe w e xamples of how ke ys and but tons to be clic ke d or pressed ar e e xpressed in this man ual: • Contr.
xi Abbreviations Used in This Manual In this man ual, product names and mod el names are abbr e viated as f ollows: Microsof t ® Windows ® 98 op erating syst em: Windows 98 Microsof t ® Windows ® .
xii T rademarks Canon, the Canon logo , imageR UNNER, NetSpot, imageW ARE, MEAP , and the MEAP logo are trademarks of Canon Inc. Adobe, Acrobat , P ostScr ipt, and P ostScript 3 are trademarks of Adobe Systems Incorporated. Apple, Apple T alk, EtherT alk, LocalT alk, Macintosh, Mac OS , and P ow er Macintosh are trade marks of Apple Computer , Inc.
xiii Copyright Cop yright 2006 b y Canon Inc. All rights reserved. No par t of this publicat ion ma y be reprod uced or transmit ted in any f or m or by an y means, electron ic or mechanic al, includin g photocopying and reco rding, or by any inf ormation storage or retrie v al system without the prior written per mission of Canon Inc.
xiv.
1-1 CHAPTER 1 Before Y ou Start This chapter describes what you need to know bef ore you start usin g the machine, including the network e nvironments with which the machine is comp atible , and how to check the network environment you are using. Optional Equipment and System Requirements .
Optional Equipment and System Requirements 1-2 1 Before Y ou Start Optional Equipment and System Requirements This section describes the option al equipment and syst em en vironments with wh ich the machine is compatible .
Optional Equipment and System Requirements 1-3 1 Before Y ou Start System Requirements The f ollo wing netw ork and system en vironment s are compatib le when printing or sending a f ax from a computer : IMPOR T ANT If you are using Windo ws 2000, y ou need to install Ser vice P ac k 2 or later .
Optional Equipment and System Requirements 1-4 1 Before Y ou Start • Compatible Computers - Windows: IBM PC/compat ibles - Macin tosh: Mac OS X 1 0.3 or later operati ng computers/memor y IMPOR T ANT When yo u are using Mac OS X 10.
Optional Equipment and System Requirements 1-5 1 Before Y ou Start Using E-Mail/I-Fax Optional Equipment Requirements • Univ ersal Send Kit IMPOR T ANT For more in f ormation on the equipment needed, consult y our local authorized Canon dealer .
Optional Equipment and System Requirements 1-6 1 Before Y ou Star t Sending Data Optional Equipment Requirements • Univ ersal Send Kit IMPOR T ANT For more in f ormation on the equipment needed, consult y our local authorized Canon dealer .
Optional Equipment and System Requirements 1-7 1 Before Y ou Star t ■ With a TCP/IP Netw ork (Using W ebD A V): • Compatible servers - Microsoft Wind ows 2000 Ser ver and IIS 5.0 - Microsoft Wind ows 2000 Prof essional and IIS 5.0 - Microsoft Wind ows XP Prof essional and IIS 5.
Checking Your Ne twork Environment 1-8 1 Before Y ou Star t Checking Y our Network Environment Ref er to the f ollowing e xamples to confirm the network environm ent that is connected to the machi ne, and t hen perf orm the necessar y opera tions f or that enviro nment.
Checking Your Ne twork Environment 1-9 1 Before Y ou Star t IMPOR T ANT • Optional equipment is required to use the e-mail/I-f ax functions, or da ta sending functions f or the machine . F or the equip ment needed, see "O ptional Equipment and System Requirements," on p .
Checking Your Ne twork Environment 1-10 1 Before Y ou Star t.
2-1 CHAPTER 2 Settings Common to the Network Protocols This chapter describes setting items common to the network protocols, which are require d f or using the machine in a network environment. Before specifying the settings of the desired protocol (Chapters 3 to 6), be sure to set the items explained in this chapter .
Network Environment Setup Procedures 2-2 2 Settings Common to the Network Protocols Network Environment Setup Procedures Bef ore using the machine in a netw ork envir onment, it is necessary to perform the f ollowing set up procedures. 1 Network Cab le Connection (See "Connecting the Ma chine to a Computer or Network," on p.
Connecting the Machine to a Computer or Network 2-3 2 Settings Common to the Network Protocols Connecting the Machine to a Computer or Network The machine can be connected to a computer or net work with a USB cab le or 10Base-T /100Base-TX Ethernet cab le.
Connecting the Machine to a Computer or Network 2-4 2 Settings Common to the Network Protocols CA UTION When connecting the interface cable or ne tw ork ca ble, be sure to ob serve the follo wing precautions to av oid electrical shock. - T urn OFF the machi ne's main power switch before disconnec ting the power cord fr om the po wer outlet.
Connecting the Machine to a Computer or Network 2-5 2 Settings Common to the Network Protocols Connecting to a USB Interface Y ou can connect the ma chine to a computer with a USB port via a USB cabl e. The machine is USB 2.0 Hi-Speed compatible. The drivers and utility that matches the operating system on your computer will be installed.
Connecting the Machine to a Computer or Network 2-6 2 Settings Common to the Network Protocols NO TE • If you c onnect the machin e to a Macintosh via a USB cab le, the Macintosh, if shut do wn, may star t up when the machine star ts up or retur ns from the Sleep mode.
Touch Panel Display Transition 2-7 2 Settings Common to the Network Protocols T ouch Panel Display T ransition The f ollo wing is a flo w diagr am of the touch pan el displa y used in this man ual. Specify the network settings from the Additional Functions scree n displa y ed b y pressing (Additional Fun ctions).
Touch Panel Display Transition 2-8 2 Settings Common to the Network Protocols IMPOR T ANT Settings specified from the control panel beco me eff ectiv e after the machine is restarted, after the procedure. T ur n OFF the machine , wait at lea st 10 seconds, and then turn it ON.
Interface Settings 2-9 2 Settings Common to the Network Protocols Interface Settings This section describes how to specify t he interf ace settings from t he control panel. If y ou are configuring the settings f or the first time, us e the control pan el of the machine.
Interface Settings 2-10 2 Settings Common to the Network Protocols 2 On the Network Settings screen, press [Ethernet Driver Settings] ➞ specify the fo llowing.
Communication Environment Setup 2-11 2 Settings Common to the Network Protocols Communication Environment Setup This section describes how to se t up the en vironment f or communication betw een the machine and computers on y our n etwork. If y ou are con figuring the settings f or the first time , use the co ntrol panel of th e machine.
Communication Environment Setup 2-12 2 Settings Common to the Network Protocols IMPOR T ANT • The machine supports the SNMP v . 1 and SNMP v . 3 management functions. Y ou can use them s imultaneously . The [Read Only ]/[Read/Write] functions of SNMP v .
Communication Environment Setup 2-13 2 Settings Common to the Network Protocols 2 Specify the settings f or SNMP v . 3. [On] for <Use SNMP v . 3>: Specify th e user and context according to the following procedures. NO TE An SNMP v . 3 user with the follo wing sett ings is regist ered by default.
Communication Environment Setup 2-14 2 Settings Common to the Network Protocols ● If y ou want to c hange the status of an SNMP v . 3 user: ❑ Press [User Settings] ➞ select the user whose status you w ant to change ➞ press [User On/Off]. ● If you want to edit the context: ❑ Press [Context Settings] ➞ edit the context.
Communication Environment Setup 2-15 2 Settings Common to the Network Protocols IMPOR T ANT • If you w ant to use a Canon printer driver or utility , press [On] for both <Use SNMP v . 1> and [Ena ble D edicated P or t]. • Y ou can restrict the IP addresses of computers on which items can be set or browse d.
Communication Environment Setup 2-16 2 Settings Common to the Network Protocols.
3-1 CHAPTER 3 Using a TCP/IP Network This chapter descr ibes the settings an d pr ocedures necessar y to connect and use th e machine with a TCP/IP networ k. TCP/IP Netw ork Setup Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TCP/IP Network Setup Procedures 3-2 3 Using a TCP/IP Network TCP/IP Network Setup Procedures T o use a TCP/IP network, it is n ecessar y to perf or m the f ollowing procedures . 1 Proto col Settings (See "Pr otoc ol Settings," on p. 3-3.) Specify the protocol settings .
Protocol Settings 3-3 3 Using a TCP/IP Network Protocol Settings This section describes how to specify t he protocol settings f or the machine using the control panel. If y ou are co nfiguring the settings f or the fir st time , use the control panel of the mach ine.
Protocol Settings 3-4 3 Using a TCP/IP Network ● Using a fixed IP ad dress: ❑ [DHCP], [RARP], and [BOO TP]: [Off] Enter the appropriate values in [IP Address], [Subnet Mask], and [Gateway Address]. NO TE It takes about two minutes to chec k whether the DHCP , BOOTP , or RARP settings can be used.
Protocol Settings 3-5 3 Using a TCP/IP Network IMPOR T ANT • The DNS dynamic update function enab les th e ma chine to register its IP address, host name, and doma in name to the DNS server automatically . This function is only av ailab le in the en vironment where there is a dynamic DNS ser ver .
Protocol Settings 3-6 3 Using a TCP/IP Network NO TE • Y ou can only outp ut a banner pag e if y ou ar e us ing the optional UFR II/PCL Printe r Kit or the optional PS Printer Kit.
Protocol Settings 3-7 3 Using a TCP/IP Network IMPOR T ANT In order to perf or m time synchro nization through SNTP , it is necessar y to set t he time zone of the region in which you are using the machine in adv ance . F or instructions on how to set the time zone , see Chapter 6, "System Manager Settings," in the Reference Gu ide .
Protocol Settings 3-8 3 Using a TCP/IP Network 7 On the TCP/IP Settings screen, press [Use P ASV Mode for FTP] ➞ specify the f ollowing. IMPOR T ANT Whether you use the P ASV mode f or FTP depends on the netwo rk environment you are using and th e settings of the file server you are sending to .
Protocol Settings 3-9 3 Using a TCP/IP Network IMPOR T ANT In order to select [On] f or <Use SSL> to allo w SSL communicatio n, a ke y pair is necessary . Y ou can use the preinstalled def ault key pair , or generate an original ke y pair with the machine, to use as the def ault ke y pair .
Protocol Settings 3-10 3 Using a TCP/IP Network Pressing [Of f] for [Use HT TP] auto matically sets [Remote UI] (in the System Settings screen) and [IPP Print Sett ings] to 'Off'. 11 On the TCP/IP Settings screen, press [Pr o xy Settings] ➞ specify the f ollowing.
Protocol Settings 3-11 3 Using a TCP/IP Network 12 On the TCP/IP Settings screen, press [IP Address Range Settings] ➞ specify the fol lowing. Y ou need to set <RX/Print Range> if you are using.
Protocol Settings 3-12 3 Using a TCP/IP Network ● If y ou want to rest rict the IP ad dresses of co mputers fr om which data (print/fax/I- fax job) can be sent t o the machine: ❑ <Apply Setting.
Protocol Settings 3-13 3 Using a TCP/IP Network IMPOR T ANT • Y ou can register up to eight IP address es or IP address ranges. • The IP address '0.0.0.0 ' cannot be s pecified. • The value of [First Address] f or [Multi ple Addresses] should be smaller than or equal to that of [Last Address].
Protocol Settings 3-14 3 Using a TCP/IP Network IMPOR T ANT • Up to 100 MA C addresse s can be specified. • If y ou select [On] f or <Apply Settings>, y ou will become unab le to access from MA C addresses which ha v e not been specifie d. Check the MA C addresses carefully bef ore specifying them.
Protocol Settings 3-15 3 Using a TCP/IP Network 2 On the TCP/IP Settings screen, press [SNTP Settings] ➞ check the follo wing. After pressing [NTP Server Check], if <O K> is displayed, time synchronization is working correctly via SNTP .
Protocol Settings 3-16 3 Using a TCP/IP Network 1 On the TCP/IP Settings screen, press [Certificate Settings] ➞ [Generate Ke y]. 2 Press [Generate SSL Ke y] ➞ specify the follo wing. In [Key Name], enter a name for the key pair ➞ select a key length.
Protocol Settings 3-17 3 Using a TCP/IP Network 3 Press [Next] ➞ set the self-signed server cer tificate. Y ou cannot set an end date which is earlier than the start date. Set at least one of th e following items ➞ press [Start Key Generatn] to generate a key .
Protocol Settings 3-18 3 Using a TCP/IP Network Registering a Key Pair File and Serv er Cer tificate File Installed from a Computer Y ou can install a k ey pa ir from a computer in order to use encrypted SSL communication f or IPP printing, e-mail and I-fax es , the Remote UI, MEAP functions via a web bro wser , and de vice inf ormation deliv ery .
Protocol Settings 3-19 3 Using a TCP/IP Network Editing Key Pairs and Server Certific ates Y ou can confirm the settings of registered k e y pairs and server certificates. Y ou can also erase unnecessary ke y pairs and se r v er cer tificates , and set the def ault ke y pair .
Protocol Settings 3-20 3 Using a TCP/IP Network ● If y ou want to eras e a registered ke y pai r: ❑ Select the key pair to erase ➞ press [Erase]. IMPOR T ANT The ke y pair with (def ault) displa y ed to the le ft of it is set as the def ault k ey pair .
Protocol Settings 3-21 3 Using a TCP/IP Network NO TE • The ke y pair with (def ault) displa y ed to the le ft of it is set as the def ault k ey pair . T o change the d ef ault ke y pair , select a k e y pair which doe s not ha v e (def ault) displa yed to the left of it.
Protocol Settings 3-22 3 Using a TCP/IP Network Editing a CA Certificate Y ou can confirm the settings of registered CA certificates. Y ou can also erase unnecessary CA cer tificates. 1 On the TCP/IP Settings screen, press [Certificate Settings] ➞ [CA Certificate List] ➞ specify the follo wing.
Protocol Settings 3-23 3 Using a TCP/IP Network Generating and Confirming a Key Pair and Device Signature Certificate and Us er Certificate for Adding Digital Signatures to PDF Files The machine can add the f ollowing two types of digital signatures to PDF files .
Protocol Settings 3-24 3 Using a TCP/IP Network 1 On the TCP/IP Settings screen, press [Certificate Settings] ➞ [Generate Ke y]. 2 Press [Generate/Update Device Signature Ke y] ➞ [Y es]. IMPOR T ANT Y ou can register only one ke y pair . NO TE The name of the generated/updated k e y pair is set to 'De v ice Signature K e y'.
Protocol Settings 3-25 3 Using a TCP/IP Network Confirming a Key Pair and Device Certificate The f ollo wing procedure describes how to confirm a ke y pair and de vice cer tificate generated/ updated in "Set ting a K ey P air and De vice Cer tificate," on p .
Protocol Settings 3-26 3 Using a TCP/IP Network Confirming a Key Pair and User Certificate The f ollowin g procedure describes how the syste m manager can confirm the ke y pairs and user cer tificates f or all users. Install the key pair and user cer tificate used f or adding a user sign ature to PDF files from a comput er .
Protocol Settings 3-27 3 Using a TCP/IP Network If [Certificate V erification] is grayed out or <The key is corrupted or invalid.> is displayed, you cannot use the key pair . After erasing the corrupted or invalid key pair , install a new key pair and user cer tificate from a computer .
Protocol Settings 3-28 3 Using a TCP/IP Network ● If y ou want to rece ive e-mail/I -faxes usi ng the mach ine's o wn SMTP receiving function: ❑ Register the host name of the machine with the DNS ser ver ➞ specify the f ollowing. Press [On] for <SMTP Receipt> ➞ press [Of f] for <POP>.
Protocol Settings 3-29 3 Using a TCP/IP Network IMPOR T ANT • If the POP ser ver does not suppo r t SSL encr yption, data is not encr ypted when [On] is selected for <Allow SSL (POP)>. • In order to sele ct [On] f or <Allo w SSL (POP) > to allo w SSL tra nsmission, it is necessary to generate a k ey pair in adv ance.
Protocol Settings 3-30 3 Using a TCP/IP Network IMPOR T ANT If the SMTP host does not support encr ypti on, data is not encr ypted when [On] is selected f or <Allow SSL (SMTP Send)>.
Setting Up a Computer fo r Printing/Sending a Fax 3-31 3 Using a TCP/IP Network Setting Up a Computer for Printing/Sending a Fax After y ou ha v e completed the protocol se ttings f or printing and sending a f ax with the machine , y ou are ready to set up each of the comp uters f or printing or sending a f ax.
Setting Up a Computer for Printing/Sendin g a Fax 3-32 3 Using a TCP/IP Network IMPOR T ANT • Optional equipment is required to print or s end a fax from a computer . For the equipment needed, see "Optional Equipment and System Requirements," on p .
Setting Up a Computer fo r Printing/Sending a Fax 3-33 3 Using a TCP/IP Network Printer Connection Method (LPD/Raw) Windows 98/Me ■ Installing a New Drive r 1 Install the driver .
Setting Up a Computer for Printing/Sendin g a Fax 3-34 3 Using a TCP/IP Network IMPOR T ANT If you use LPD , enter one of the follo wing in [LPR Queue Name] in the [Add P or t] dialog bo x of Canon LPR2: -L P The machine prints according to its spool settings .
Setting Up a Computer fo r Printing/Sending a Fax 3-35 3 Using a TCP/IP Network ■ Changing the P or t after Installing the Driver 1 Install Canon LPR2, and chan ge the port settings.
Setting Up a Computer for Printing/Sendin g a Fax 3-36 3 Using a TCP/IP Network 3 In the [Printer P or ts] dialog bo x, fr om [A vailab le ports types], select [Standar d TCP/IP P ort] ➞ clic k [Ne w P or t].
Setting Up a Computer fo r Printing/Sending a Fax 3-37 3 Using a TCP/IP Network Mac OS X 1 Install the driver . Install the driver according to the instructions in the ma nual for each driver . • If you want to use the UFR II printer driver See the Mac UFR II Driver Guide .
Setting Up a Computer for Printing/Sendin g a Fax 3-38 3 Using a TCP/IP Network NO TE • The admintool utility is included with the ope rating system . F or specific oper ating instructions, see the operating s ystem manua l. • Y ou can specify one of the f ollowing p rint queues.
Setting Up a Computer fo r Printing/Sending a Fax 3-39 3 Using a TCP/IP Network 2 After installing Canon LPR2, restart the computer . For instructions on how to install Canon LPR2 and set ports, see Chapter 1, "Using Canon LPR2," in the Canon LPR2 User's Guide (PDF manual).
Setting Up a Computer for Printing/Sendin g a Fax 3-40 3 Using a TCP/IP Network Windows 2000/XP/Server 2003 By installing Canon LPR2, you can also se t IPP . Canon LPR2 enables y ou to set por ts easily . For mor e inf ormation, see Chapter 1, "Using Canon LPR2," in the Canon LPR2 User's Guide (PDF manual).
Setting Up a Computer fo r Printing/Sending a Fax 3-41 3 Using a TCP/IP Network If you want to us e encrypted communicatio n and per for m IPPS printing, enter the following URL in [URL]. https://<the IP address or host name of the machine>/ipp 4 Follow the instructions on the screen to complete the installation.
Setting Up a Computer for Printing/Sendin g a Fax 3-42 3 Using a TCP/IP Network The following is a UNIX command example. 1. U:> ftp 172.24.176.244 *Connect to server Connected to 172.2 4.176.244. 220 Connection establ ished. 2. Name (172.24.176.244:none): user_name *User login 331 Password r equired to login.
Setting Up a Computer as a File Server 3-43 3 Using a TCP/IP Network Setting Up a Computer as a File Ser ver T o send data from the mac hine to a computer on your network , you need to specif y the setting s of the com puter for receiving data .
Setting Up a Computer as a File Server 3-44 3 Using a TCP/IP Network F TP Ser ver Settings Windows 2000/XP/Server 2003 This section describes the procedures f or using the def ault home dire ctory under [Def ault FTP Site]. T o use other settings , ente r the FTP site and home dire ctory by ref erring to the IIS doc umentatio n.
Setting Up a Computer as a File Server 3-45 3 Using a TCP/IP Network 3 In the [Default FTP Site Pr oper ties] dialog bo x, on the [Home Directory] sheet, select both [Read] and [Write]. 4 Right-clic k [My Computer] ➞ click [Pr oper ties] to open the [System Prope rties] dialog box ➞ confirm [Full computer name].
Setting Up a Computer as a File Server 3-46 3 Using a TCP/IP Network 5 Right-clic k [My Computer] ➞ click [Mana ge] to open the [Computer Management] window ➞ under [System T ools], in [Local Users and Gr oups], right-c lic k the [User s] f older ➞ clic k [New User].
Setting Up a Computer as a File Server 3-47 3 Using a TCP/IP Network 7 Set a recipient ad dress using the contr ol panel. Sample recipient setting: • Server side settings: • The machine's rec.
Setting Up a Computer as a File Server 3-48 3 Using a TCP/IP Network UNIX/Linux F or more inf or mation on the system requirements f or using a UNIX/Linu x computer as an FTP server , see "System Requirements" in "Sending Data, " on p .
Setting Up a Computer as a File Server 3-49 3 Using a TCP/IP Network IMPOR T ANT • T o use the host name of the abo v e e x ample f or [Host Name ], it is necessary to use a DNS ser v er . (This applies ev en if the machine and the FTP server are in the same subnet.
Setting Up a Computer as a File Server 3-50 3 Using a TCP/IP Network 6 Set a recipient ad dress using the contr ol panel. Sample recipient setting: • Server side settings (set using the above proced.
Setting Up a Computer as a File Server 3-51 3 Using a TCP/IP Network F TP Ser ver for imageWARE Gateway An FTP ser ver f o r imageW ARE Gatewa y is required for receiving da ta from the machine, when used with imageW ARE Gatewa y . 1 Set up the FTP server fo r imageW ARE Gate wa y ➞ specify the folder to store data sent fr om the mac hine.
Setting Up a Computer as a File Server 3-52 3 Using a TCP/IP Network W ebDA V Ser ver Settings The W ebD A V sending function is a function f or sending sca nned image files , image files f or receive.
Setting Up a Computer as a File Server 3-53 3 Using a TCP/IP Network 2 Create a virtual directory . ❑ Star t IIS ➞ from the IIS snap-in, select the W e b site to add a directory to. ❑ On the [Action] menu, point to [Ne w] ➞ select [Vir tual Director y].
Setting Up a Computer as a File Server 3-54 3 Using a TCP/IP Network • The machine's address settings: IMPOR T ANT • Up to 128 alphanumeric charac ters can be entered f or [Host Name] on the control panel. Also , up to 255 alphanumeric char acters can be entered f or [F older P ath].
Setting Up a Computer as a File Server 3-55 3 Using a TCP/IP Network Apache for Windows 200 0/2000 Ser ver/XP/Ser ver 2003/UNIX/Linux/ Mac OS X The f ollo wing procedures de scribe how to create t he .
Setting Up a Computer as a File Server 3-56 3 Using a TCP/IP Network ❑ Specify the ser ver name. Directive to be changed: • Before change #ServerName localho st:80 • After change #ServerName localho st:80 ServerName Apache-Serv er .ccm.canon.co.
Setting Up a Computer as a File Server 3-57 3 Using a TCP/IP Network • The machine's address settings: IMPOR T ANT • Up to 128 alphanumeric characters ca n be entered f or [Host Name] on the control panel. Also , up to 255 alphanumeric characters can be entered f or [Folder P ath].
Setting Up a Computer as a File Server 3-58 3 Using a TCP/IP Network.
4-1 CHAPTER 4 Using a NetW are Network (Windows) This chapter descr ibes settings and proced ures for using the machine with a NetW are network. NetW are Network Setup Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NetWare Network Setup Procedures 4-2 4 Using a NetW are Network (Windows) NetW are Network Setup Procedures T o use a NetW are netwo rk, it is necessar y to perf orm the f ollo wing procedures . 1 NetW are Print Service Settings (See "NetWa re Print Service Sett ings," on p.
NetWare Print Service Settings 4-3 4 Using a NetW are Network (Windows) NetW are Print Ser vice Settings T o pr int using a NetW are network, you need t o specify print ser vice settings, including print server and q ueue settings . Y ou can use the so ftware listed belo w to specify the print ser vice settin gs from your comp uter .
NetWare Print Service Settings 4-4 4 Using a NetW are Network (Windows) ■ Queue Server Mode and Remote Printer Mode The machine suppor ts both the queue ser ver mode and the remote printer mode.
NetWare Print Service Settings 4-5 4 Using a NetW are Network (Windows) ❑ If you are using the remote printer m ode, select [P aralle l] from [T ype] ➞ click [Communication] to open the [P arallel Communication] dialog box. Select [LPT1] fr om [Port], and [Manual load] under [Connection type].
NetWare Print Service Settings 4-6 4 Using a NetW are Network (Windows) ❑ Enter the name of th e queue y ou are set ting up ➞ press [ENTER] on the ke yboard. ❑ Select the name of the queue you specified ➞ press [ENTER] on the keyboard. ❑ Select [Queue Ser vers] ➞ press [ENTER] on the keyboard.
NetWare Print Service Settings 4-7 4 Using a NetW are Network (Windows) ❑ Select the queue you set up in step 3 ➞ press [ENTER] on the keyboard. 7 Press [ESC] on the ke yboar d repeatedl y until y ou return to the [Exit PCONSOLE] window ➞ select [Y es] to quit PCONSOLE.
Protocol Settings 4-8 4 Using a NetW are Network (Windows) Protocol Settings This section describes how to sp ecify the protocol settings f or the machine using the control panel. If you ar e configuring the settings f or the first time, use the control panel of the mach ine.
Protocol Settings 4-9 4 Using a NetW are Network (Windows) 2 Press [Settings] ➞ specify the print service details. Specify the same tree, context, file se rver , and print server names th at you specified in "NetWar e Print Service Se ttings," on p.
Protocol Settings 4-10 4 Using a NetW are Network (Windows) ❑ Press [Log In] ➞ in the Enter Network Pass word screen, enter the name and passw ord of a user to whom the browse right is granted. If the browse rig ht is limited to the spec ific user , it is necessar y to log in to NetW are as a user to whom the browse right is granted.
Protocol Settings 4-11 4 Using a NetW are Network (Windows) ● Setting Bindery PServer or RPrinter using the ke yboar d on t he touch panel displa y: ❑ In [File Ser v er], enter the name of the file ser ver to which the desired print ser ver belongs ➞ in [Pr int Ser ver], enter the name of the desired print ser ver .
Setting Up a Computer for Printing/Sendin g a Fax 4-12 4 Using a NetW are Network (Windows) Setting Up a Computer for Printing/Sending a Fax After y ou ha v e completed spe cifying the NetW are print ser vice settings and printer protocol settings , y ou are ready to set up each of the computers f or printing or sending a f ax.
Setting Up a Computer as a File Server 4-13 4 Using a NetW are Network (Windows) Setting Up a Computer as a File Ser ver T o send data from the mac hine to a computer on your network , you need to specif y the setting s of the com puter for receiving data .
Setting Up a Computer as a File Server 4-14 4 Using a NetW are Network (Windows) 3 Set a recipient ad dress fr om the contr ol panel. There are two methods for specifying the re cipient address; selec.
Setting Up a Computer as a File Server 4-15 4 Using a NetW are Network (Windows) • Example 2 If "SALES_US" cont ain s the user accou nt "john" • Example 3 If "SALES" .
Setting Up a Computer as a File Server 4-16 4 Using a NetW are Network (Windows) IMPOR T ANT • If you w ant to use [Browse ] to specify each item, mak e sure y ou press [Browse] after the e xpiration of the time specified in "Startup Time Settings ," on p .
5-1 CHAPTER 5 Using a NetBIOS Network This chapter descr ibes settings and proced ures for using the machine with a NetBIOS network. NetBIOS Network Setup Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Protocol Settings.
NetBIOS Network Setup Procedures 5-2 5 Using a NetBIOS Network NetBIOS Network Setup Procedures T o use a NetBIOS network, it is necessary to perf orm the f ollowing p rocedures. 1 Proto col Settings (See "Pr otoc ol Settings," on p. 5-3.) Specify the protocol settings .
Protocol Settings 5-3 5 Using a NetBIOS Network Protocol Settings This section describes how to specify t he protocol settings f or the machine using the control panel. If y ou are co nfiguring the settings f or the fir st time , use the control panel of the mach ine.
Protocol Settings 5-4 5 Using a NetBIOS Network 1 On the Netwo rk Settings screen, press [SMB Server Settings] ➞ specify the f ollowin g. [On] for <Use SMB Server>: Y ou can use the SMB se rver . In [Server], enter the name of a compute r that the machine conn ects to, using the keyboard on the touch panel display .
Protocol Settings 5-5 5 Using a NetBIOS Network 2 On the TCP/IP Settings screen, press [WINS Configuration] ➞ specify the f ollow ing. [On] for <WI NS Resoluti on>: Y ou can re solve the name with W INS. Enter t he IP address of a WINS server in [WINS Server Address].
Setting Up a Computer for Printing/Sendin g a Fax 5-6 5 Using a NetBIOS Network Setting Up a Computer for Printing/Sending a Fax After you hav e completed the pr otocol setting s, y ou are ready t o set up each of the computers f or pr inting or sending a f ax.
Setting Up a Computer fo r Printing/Sending a Fax 5-7 5 Using a NetBIOS Network Windows 98/Me The f ollo wing is the procedure f or specifying a NetBIOS network with Windows 98/ Me.
Setting Up a Computer for Printing/Sendin g a Fax 5-8 5 Using a NetBIOS Network Windows 2000/XP/Server 2003 The f ollo wing is the p rocedure f or specifying a NetBIOS netw ork with Windows 2000/XP/Server 2003. The proced ure below uses a screen of Windows 2000 as an e xample.
Setting Up a Computer fo r Printing/Sending a Fax 5-9 5 Using a NetBIOS Network Printer Connection Method Windows If Windows 200 0/XP/Server 2003 is on y our net work, the f ollowing procedure enab les yo u to set up a print server f or more efficient management of net work printers.
Setting Up a Computer for Printing/Sendin g a Fax 5-10 5 Using a NetBIOS Network 2 Install the driver . Install the driver according to the follo wing procedures indicated in the manual for each driver . (The UFR II prin ter driv er is not available for Windows 98/Me.
Setting Up a Computer as a File Server 5-11 5 Using a NetBIOS Network Setting Up a Computer as a File Ser ver T o send data from the mac hine to a computer on your network , you need to specif y the setting s of the com puter for receiving data. Y o u can send data over a NetBIOS network to a Windo ws or Samba (UNIX/Lin ux) shared f o lder .
Setting Up a Computer as a File Server 5-12 5 Using a NetBIOS Network Connecting to a NetBIOS Ne twork and Configuring a Shared Folder Windows 98/Me If a suitab le Window s 2000/XP/Server 2003 machine is av ailable on y our netw ork, it is recommended th at yo u configure that machine a s a file server inst ead of using a Windows 98/ Me machine .
Setting Up a Computer as a File Server 5-13 5 Using a NetBIOS Network 3 On the [Access Contr ol] sheet, select the le vel of access contr ol. If you select [User -level access contr ol], specify a domain in which a list of users and groups is saved. 4 On the [Identification] sheet, confirm the compu ter name.
Setting Up a Computer as a File Server 5-14 5 Using a NetBIOS Network 5 Open the pr operties dialog box of the f older y ou want to share ➞ on the [Sharing] sheet, clic k [Share As] ➞ enter the share name in [Share Name].
Setting Up a Computer as a File Server 5-15 5 Using a NetBIOS Network • The machine's recipient settings: IMPOR T ANT • If you w ant to use [Browse ] to specify each item, mak e sure y ou press [Brow se] after the e xpiration of the time specified in "Startup Time Settings," on p .
Setting Up a Computer as a File Server 5-16 5 Using a NetBIOS Network Windows 2000/XP/Server 2003 It is recommended that the file server be configure d by th e network administr ator . The number of users or clients that can access a server running Win dows 2 000/XP/ Server 2003 is limited.
Setting Up a Computer as a File Server 5-17 5 Using a NetBIOS Network 5 Confirm the computer name. If you are using Windows 2000, right-click the [My Computer] icon ➞ click [Manage] to open the [Co mputer Management] window .
Setting Up a Computer as a File Server 5-18 5 Using a NetBIOS Network 6 Right-clic k the [My Computer] icon ➞ c lic k [Manage] to open the [Computer Management] windo w ➞ under [System T ools], in [Local User s and Gr oups], fr om the [User s] f older , c lic k [New User].
Setting Up a Computer as a File Server 5-19 5 Using a NetBIOS Network NO TE In an Activ e Director y environmen t, the pr ocedures f or setting up users differ from the above .
Setting Up a Computer as a File Server 5-20 5 Using a NetBIOS Network ❑ Click [P er missions] to display the dialog bo x. Select or add the users or groups to whom you want to give access to the shared folder ➞ under [Permissions], select both [Change] and [Re ad].
Setting Up a Computer as a File Server 5-21 5 Using a NetBIOS Network Sample recipient setting: • Server side settings (set and confirmed in the above step.
Setting Up a Computer as a File Server 5-22 5 Using a NetBIOS Network NO TE • Y ou can send data using the follo wing f orm ats. A DNS server is required f or the latter c ase: 192.
Setting Up a Computer as a File Server 5-23 5 Using a NetBIOS Network • The machine's recipient settings: For a sample screen, see the example of Windows 2000/XP/S erver 2003 screen (see p.
Setting Up a Computer as a File Server 5-24 5 Using a NetBIOS Network.
6-1 CHAPTER 6 Using an AppleT alk Network (Macintosh) This chapter descr ibes settings and proced ures for printing via an AppleT alk network. AppleT alk Network Setup Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AppleTalk Network Setup Procedures 6-2 6 Using an AppleT alk Network (Macintosh) AppleT alk Network Setup Procedures T o pr int via an AppleT alk network, it is necessary to perf orm the follo wing procedures .
Protocol Settings 6-3 6 Using an AppleT alk Network (Macintosh) Protocol Settings This section describes how to specify t he protocol settings f or the machine using the control panel. If y ou are co nfiguring the settings f or the fir st time , use the control panel of the mach ine.
Setting Up a Computer for Printing 6-4 6 Using an AppleT alk Network (Macintosh) Setting Up a Computer for Printing After y ou ha v e completed the machine protoco l settings, install t he printer driver on the Macintosh that will do the printing, an d then make the settings f or the pr int destination.
7-1 CHAPTER 7 T roubleshooting This chapter describes how to resolve printing problems. Network Connection Problems and Remedies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Printing Problems and Rem edies . . . . . . . . . . .
Network Connection Problems and Remedies 7-2 7 T roubleshooting Network Connection Problems and Remedies This section describes the causes of netw ork connection prob lems , and ho w to resolv e them. Unable to Set up a Network Cause [Change Settings/D ispla y Conn ection Confir m.
Network Connection Pr oblems and Remedies 7-3 7 T roubleshooting Remedy Check the f ollowing: • If the dial-up router does not hav e to send pack ets via broadcast, change the router setting s to ensure that it send s pac kets vi a a method othe r than broadcast.
Printing Problems and Remedies 7-4 7 T roubleshooting Printing Problems and Remedies This section describes how to re solve basic printing problems. Unable to Install a Driver (TCP/IP Netw ork) Cause .
Printing Problems and Remedies 7-5 7 T roubleshooting NO TE Y our computer may not be ab le to recogniz e the machine e v en though the IP address settings are appropriate. This prob lem may be resolved b y dela ying the star tup of network communications f or the machine.
Printing Problems and Remedies 7-6 7 T roubleshooting Cause 7 An error message is displa ye d on the touch panel display of the machine . Remedy After confirmi ng the error message, see Chapter 8, "T roubleshooting," in the Ref erence Guide and perform the necessar y operations according to the error message disp lay ed.
Printing Problems and Remedies 7-7 7 T roubleshooting Remedy P erform the following steps to correct the machine's password setting: • Confir m the passw ord in the NetW are print ser ver f or printing on the machine.
Printing Problems and Remedies 7-8 7 T roubleshooting Cause 5 The computer that is printi ng is not properly set up. Remedy Check the f ollowing: • Confir m that the proper prin ter dr iv er is installed. If you are printin g from Windows, each computer must ha v e a printer dr iver installed.
Printing Problems and Remedies 7-9 7 T roubleshooting Cause 4 An error message is displa yed on the touch panel displa y of the machine. Remedy After confirmi ng the error message, se e Chapter 8, "T roubleshooting," in the Ref erence Guide and perform the necessar y operations according to the error message displayed.
Data Sending/File Sharing Problems and Remedies 7-10 7 T roubleshooting Data Sending/File Sharing Problems and Remedies This section describes how to re solv e data sending/file sharing problems . Unable to Send Data/Share Files (FT P) Cause 1 The FTP server is not set correctly .
Data Sending/File Sharing Problems and Remedies 7-11 7 T roubleshooting Cause 3 The machine was turned OFF while sending data to the FTP ser ver , and when the machine was tur ned back ON, it attempted to resend the data. (If a Windows 2000/XP/Ser ver 2003 FTP ser ver is being used.
Data Sending/File Sharing Problems and Remedies 7-12 7 T roubleshooting • Star t the NW ADMIN f or this server . If [Root] is display ed at the upper left cor ner of the screen, th e lay er below it is the conte xt. If [Root] is not display ed, go to the [View] men u ➞ click [Go Up a Lev el] to change to the displa y below [Root].
Data Sending/File Sharing Problems and Remedies 7-13 7 T roubleshooting <Check the server .> is display ed when you try to use a WebD A V ser ver . Cause The W ebD A V ser ver is unav ailable . Remedy Confirm the status of the WebD A V server . <TCP/IP error> is displa yed when you try to send to a W ebD A V ser ver .
Data Sending/File Sharing Problems and Remedies 7-14 7 T roubleshooting • See the Sending and F acsimile Guide to confir m the settin gs for a recipient address. Cause 3 The W ebD A V ser ver is busy because of hea vy access. Remedy T ry sending again late r .
Data Sending/File Sharing Problems and Remedies 7-15 7 T roubleshooting Cause 5 Accroding to the request from the WebD A V client, th e HTTP protocol ve rsion which is not supp or ted by the WebD A V server is used. Remedy Check the settings of the W ebD A V server .
Encrypted SSL Data Communication Problems and Remedies 7-16 7 T roubleshooting Encr ypted SSL Data Communication Problems and Remedies This section describes how to re solv e encrypted SSL data communication prob lems. <The defa ult ke y is not set.
Encrypted SSL Data Communication Problems and Remedies 7-17 7 T roubleshooting <Cannot register beca use the algori thm of this key is not suppor ted.> is display ed when you tr y to register a key pair file. Cause Y ou are tr ying to register a key pair file which uses the DSA algorithm.
Encrypted SSL Data Communication Problems and Remedies 7-18 7 T roubleshooting <Digital sig. cer t. acce ss err .> is display ed. Cause 1 Access to the user cer tificate wa s denied when sending a PDF with a user signature.
8-1 CHAPTER 8 Appendix This chapter includes the network settin g s, specifications , glossary , and inde x. Network Setting Items. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Confirming Settings .
Network Setting Items 8-2 8 Appendix Network Setting Items If y ou are configuring the settings f or the f irst time in "Interf ace Settings," on p . 2-9 and "TCP/IP Sett ings," on p . 3-3, use the control pan el of the machine . After configuring the TCP/IP setti ngs, y ou can change them using the Remote UI.
Network Setting Items 8-3 8 Appendix ■ TCP/IP Settings Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery IP Address Settings IP Address IP address 0.0.0.0 N/A Subnet Mask IP address 0.0.0.0 N/A Gatew a y Address IP address 0.
Network Setting Items 8-4 8 Appendix *1 This item is a vailab le only if y ou are using the f ollowing optional equipment: - UFR II/PCL Printer Kit - PS Printer Kit - Super G3 F AX Board - Super G3 Mu.
Network Setting Items 8-5 8 Appendix *1 This item is av ailab le only if y ou are using the f ollowing op tional equipment: - UFR II/PCL P rinter Kit - PS Printer Kit - Super G3 F AX Board - Super G3 .
Network Setting Items 8-6 8 Appendix Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery Multicast Discov er y Response On/Off On Scope Name Scope name to be .
Network Setting Items 8-7 8 Appendix *3 [Genera te/Update De vice S ignature K ey] is enabled if the op tional Univ ersal Send PDF Security Feat ure Set is activa ted by registering a license k ey . *4 [K ey and Cer tificate List f or Users] is enab led if the option al Digital User Signature PDF Ki t is activat ed by regist ering a license ke y .
Network Setting Items 8-8 8 Appendix Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery Cer tificate Settings: CA Cer tificate List Cer tificate Details V er.
Network Setting Items 8-9 8 Appendix *5 This item is av ailab le only if the optional PS Printer Kit or the optional W eb Access Software is activ ated b y registering a license ke y .
Network Setting Items 8-10 8 Appendix *6 This item is a vailab le only if y ou are using the f ollowing optional equipment: - UFR II/PCL Printer Kit - PS Printer Kit - Super G3 F AX Board - Super G3 M.
Network Setting Items 8-11 8 Appendix ■ NetW are Settings* 1 *1 This item is av ailab le only if y ou are using the f ollowing optional equipment: - UFR II/PCL P rinter Kit - PS Printer Kit - Univer.
Network Setting Items 8-12 8 Appendix Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery Binder y PSer ver Settings Print Ser ver 47 Characters maximum (NULL.
Network Setting Items 8-13 8 Appendix Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery NDS PSer ver Settings Print Ser ver 64 Characters maximum (NULL) N/A.
Network Setting Items 8-14 8 Appendix ■ AppleT alk Settings ■ SMB Server Settings* 1 *1 This item is a vailab le only if y ou are using the f ollowing optional equipment: - UFR II/PCL Printer Kit .
Network Setting Items 8-15 8 Appendix ■ SNMP Settings Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery Use SNMP v . 1 On/Off On MIB Access P ermission Read/Write/Read Only Read/ Write N/A Community Name Community Name (32 Characters maximum) public N/A Use SNMP v .
Network Setting Items 8-16 8 Appendix ■ Enable Dedicated P or t Settings ■ Spool Settings* 1 *1 This item is a vailab le only if y ou are using the f ollowing optional equipment: - UFR II/PCL Prin.
Network Setting Items 8-17 8 Appendix ■ E-Mail/I-Fax Settings* 1 *1 This item is av ailab le only if the optiona l Universal Send Kit is activ ated by regi stering a license ke y .
Network Setting Items 8-18 8 Appendix NO TE Use the control panel of the de vice to set it ems which cannot be set using the Remote UI. Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery Au thent.
Confirming Settings 8-19 8 Appendix Confirming Settings Y ou can pr int a u ser's data list to confir m the network settings ma de from th e machine's touch panel displa y .
Confirming Settings 8-20 8 Appendix 08/24/2006 TUE 16:48 iR 3045 002 ..
Viewin g the Net work Ac cess Log 8-21 8 Appendix Viewing the Network Access Log This machine lo gs attempts to gain acc ess from IP ad dresses tha t it has been s et to reject.
Specifications 8-22 8 Appendix Specifications Specifications are subject to ch ange without no tice. Hardware Specifications Software Specifications Network Interface 10Base-T/100Base-TX (RJ-45) Proto.
Glossary 8-23 8 Appendix Glossar y Numeric s 10Base-T The Ether net standard suppor tin g data transf er rates up to 10 Mbp s, which utilizes a twisted-pair cable. 100Base-TX The Ether net standard suppor t ing data transfer rates up to 100 Mbps, which utilizes two pairs of high-grade twisted-pair cables.
Glossary 8-24 8 Appendix Au t o R e d i a l When A uto Redial is set to 'On', the ma chine automatically redials the recipien t's f acsimile number if the line is busy , or if t here is a sending error . The machine will wait two minutes (def ault) after the initial attempt b ef ore redialing.
Glossary 8-25 8 Appendix CCITT/ITU-T A committee that sets international standa rds for telecomm unications. CCITT/ITU-T was f ormer ly known as CCITT (Consultativ e Committee f or International T elegraph and T elephone), but is now succeeded b y IT U-T (International T elecommunications Union-T elecommunications Sector).
Glossary 8-26 8 Appendix D Delayed T ransmis sion Also called "Delay ed TX." Y ou can set a time for a document to be sent, and you do not hav e to be present when the document is sent at the specified time. Y ou can reser ve up to 120 dela y ed transmissions.
Glossary 8-27 8 Appendix DNS server Domain Name System ser ver . A server which maintains a database that translates the domain names of Inter net ser vers , such as www .w3.org, into Inter net Pro tocol (IP) addresses, such as "18.176.0.26".
Glossary 8-28 8 Appendix F File f ormats File formats are used to sav e image data. This machine suppor ts three different file f ormats, TIFF , PDF , and PDF (OCR).
Glossary 8-29 8 Appendix Gatewa y Address The default address of a network or Web site . It provides a single domain name and point of entr y to the site. H HP-GL/ 2 A graphics language that enables computer applications to dra w graphic images using prin ters.
Glossary 8-30 8 Appendix IP addres s Inter net Protocol address. A 32-bit numeric address used by IP (Internet Protocol) to specify a computer or de vice on the Inter ne t . The IP address is usually wr itten as f our numbers delimited by periods. F or e xample, 128.
Glossary 8-31 8 Appendix L LAA Locally Administered Addr ess. When a de vice is powered ON, its network address is presented to the network. The default network address assigned by the manuf acturer a.
Glossary 8-32 8 Appendix M MA C addr ess Media Access Control address. The hardwar e address of the networ k adapter of a computer connected to a local area networ k. MEAP Multifunctional Embedded Applic ation Platf orm. A system ena bling the inst allation of the Ja v a platform and Ja va applications on y our machine.
Glossary 8-33 8 Appendix NetBEUI NetBIOS Enhanced User Interface . NetBEUI is a network protocol or iginally design ed by IBM, and later e xtended by Microsoft and Nov ell. In a small network, NetBEUI is more efficient than other pr otocols, such as TCP/IP .
Glossary 8-34 8 Appendix O OS/2 A f amily of multitasking operating systems dev eloped b y IBM f or Intel x86-based computers. OS/2 pro vides a graphical user interf ace similar to Windows, as we ll as a command line interface similar to DOS . Add-ons to OS/2 enable it to run DOS and Windows applications.
Glossary 8-35 8 Appendix PDF P or table Document F ormat. Th e page description lang uage used in Adobe Systems' Acrobat document exchange system, which is restricted neither by device nor resolution.
Glossary 8-36 8 Appendix Pro xy server A ser v er that provides a cache of files av ai lable on remote servers that are slow or e xpensive to access . The term "proxy server" normally re f ers to a W orld Wide Web ser ver that, upon receiving a URL, tr ies to supply the requested file from its cache.
Glossary 8-37 8 Appendix Rotary Pul se Also called "pulse dial." On a rotar y p ulse telephone, a dial is tur ned to send p ulses to the telephone switching system.
Glossary 8-38 8 Appendix SLA Salutation Architecture. An open standard f or locating and controlling scanners, printers, copiers, f ax machines, multifunctional de vices, and other peri pherals across the Inter net, intranet, or networks, regar dless of operat ing system, netw ork protocol, or product class.
Glossary 8-39 8 Appendix SSL Secure Sock ets La y er . A protocol that ensures secur ity and privacy when transmitting private documents ov er the Inter net. SSL encryption SSL uses two ke ys to encrypt data: a public ke y , which is known to "ev eryone," and a private or secret ke y , which is known only to the recipient of the message.
Glossary 8-40 8 Appendix Subnet A por tion of a network, which may be a physically independent network segment, that shares a network address with ot her po r tions of the networ k, and is distinguished by a subnet number . F or e xample, all de vices with IP addresse s that star t with 255.
Glossary 8-41 8 Appendix To n e Some data ser vices ma y require that you us e tone dialing. If y ou ha ve a pulse dial telephone, press [T one] to switch temporarily from pulse to tone dialing when connecting to the se data ser vices.
Glossary 8-42 8 Appendix User signature Adds a digital signature to a private document, based on the registered user inf or mation when logging on using a login ser vice. This prev ents unauthorized access and alterations to the signed document. UTP Unshielded T wisted Pair cable .
Index 8-43 8 Appendix Index Numerics 10Base-T , 2-4, 8-23 100Base-TX, 2-4, 8-23 A Activity Repor t, 8-23 Add P o r t, 3-34 ADF, 8-23 Allow SSL (POP), 8-18 Allow SSL (SMTP Receiv e), 8-18 Allow SSL (SM.
Index 8-44 8 Appendix Cer tificate De tails, 8-8 Erase, 8-8 Canon Dr iv er Information Assist Se rvice , 8-24 CCITT/ITU-T, 8-25 Cer tificate Settings, 8- 6, 8-7 CA Cer tificate List, 8-8 Generate K ey.
Index 8-45 8 Appendix POP Inter val, 8-17 POP P ass w ord, 8-17 POP Server, 8-17 SMTP Receipt, 8-17 SMTP Server, 8-17 Enable Dedicated P or t, 8-16 Encr ypted SSL data communication problems and remed.
Index 8-46 8 Appendix imageW ARE Document Manager Gatew a y, 8-29 Interface settings, 2-9 Inter net Protocol (IP), 8-29 IP Address, 3-3, 3- 5, 5-5, 8-3, 8-30 IP Address Range Settings, 3-11, 8-10 P er.
Index 8-47 8 Appendix M MA C Address, 8-16, 8-32 Macintosh network, 1-8 MEAP, 8-32 Memor y Lock, 8-32 Memory RX Inbo x, 8-32 Memor y Sending, 8-32 MIB, 8-32 MIB Access P ermission, 8-15 Multicast Disc.
Index 8-48 8 Appendix T ree, 8-13 NTFS, 8-33 NTP, 8-33 NTP Ser ver Address, 8-4 NTP Ser ver Chec k, 8-4 NW ADMIN , 4-3 O Optional equip ment and system requirements, 1-2 Printing or sending fax from c.
Index 8-49 8 Appendix Processing/Data indicato r, 8-35 Protocol, 1-8, 1-9, 3-3, 4-8, 5-3, 6-3, 8-35 Protocol settings AppleT alk, 6-3 Confir ming TCP/IP setting s (TCP/IP), 3-14 E-Mail/I-F ax settings.
Index 8-50 8 Appendix NetBIOS network, 5-6 NetW are network, 4-12 TCP/IP netw ork, 3-31, 5-6 Setting/Browsing Range, 8-10 Setup procedures AppleT alk network, 6-2 NetBIOS network, 5-2 NetW are network.
Index 8-51 8 Appendix Apply Settings, 3-11, 3-12, 8-10 BOO TP, 3-4, 8-3 Cer tificate Settings, 8-6, 8-7 DHCP, 3-4, 8-3 DNS Dynamic Update, 3-5, 8-3 DNS Ser ver Settings, 3-4, 8-3 Domain Name, 8-3 Firs.
Index 8-52 8 Appendix Use Spooler, 2- 15, 8-16 Use SSL, 8-5 User, 8-18 User signature, 8-42 Using E-Mail/I-F ax, 1-5 Optional equipment requirements, 1-5 System requirements, 1-5 Using network with va.
.
USRM1-0632-00 © CANON INC. 2006 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Cannon 3035 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Cannon 3035 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Cannon 3035, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Cannon 3035 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Cannon 3035, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Cannon 3035.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Cannon 3035. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Cannon 3035 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
