Manuel d'utilisation / d'entretien du produit RMB 1445 du fabricant Bush Hog
Aller à la page of 114
©2010 Alamo Group Inc. $0.00 Published 1 1/10 Part No. 50068815 C OPERA T OR’S MANUAL BUSH HOG ® 2501 Grif fin A ve. Selma, AL 36703 334-874-2700 www .bushhog.com This Operator' s Manual is an integral p art of the safe operation of this machine and must be maintaine d with the un it at all times.
T o the Owner/Operator/Dealer All implements with moving p arts are potentially hazardous . There is no substitute for a cautious, safe-minded operator who recognizes the poten tial hazards and follows reasona ble safety practices.
In order to reduce a ccidents and enhance the sa fe operation of mowers, Bush Hog, in coo peration with other industry manufacturers has develop ed the AEM/FEMA Industrial and Agricultural Mo wer Safety Practices video and guide book.
Alamo Gr oup Ag. Division is willing to pr ovide one (1) AEM Mower Safety Practices V ideo Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety V ideo DVD Format – AEM/FEMA Mower Operator S.
T ABLE OF CONTENTS SAFETY SECTION ........ ................................................. .......................................... ........... 1- 1 General Safety Instructions and Practic es ................... ................ ................. .
Tractor Ballast .............. ............. ................ ............. ............. ................ ............. ............. ............. ............ ............ 4-6 Tractor Safety Devices .......... ................. ............. ......
HYDRAULIC HOSES ............ ................. ................................ ....................................... ........... .............. ............ 5-6 Hose Replacement ................... ................ ............. ............. .....
.
Safety Section 1-1 SAFETY SECTION.
SAFETY RMB 1445 11/10 Safety Section 1-2 © 2010 Alamo Group Inc. SAFETY General Safety Instruct ions and Practices A careful operator is the best opera tor .
SAFETY RMB 1445 11/10 Safety Section 1-3 © 2010 Alamo Group Inc. SAFETY Operator Safety Instr uctions and Practices Engine Exhaust, some of its constitue nts, a nd cert ain vehicle component s contain or emit chemicals known to the st ate of California to cause cancer and bir th defects or other reproductive harm.
SAFETY RMB 1445 11/10 Safety Section 1-4 © 2010 Alamo Group Inc. SAFETY KEEP A W A Y FROM ROT A TING ELEMEN TS to prevent entanglement and possible serious injury or death. (SG-24) Never allow children to play on or around T ractor or Implement. Children can slip or fall off the Equipment and be injured or killed.
SAFETY RMB 1445 11/10 Safety Section 1-5 © 2010 Alamo Group Inc. SAFETY Connecting & Disconnecting Implem ent Safety Instructi ons & Practices The rota ting parts of th is machine continue to rotate even af ter the T ractor has been turned of f.
SAFETY RMB 1445 11/10 Safety Section 1-6 © 2010 Alamo Group Inc. SAFETY Equipment Operation Safety In structions and Practices Never leave the T r actor and Implement unattended while the Implement is in the lifted position.
SAFETY RMB 1445 11/10 Safety Section 1-7 © 2010 Alamo Group Inc. SAFETY Do not back up this impleme nt when the boom or mower head is e xtended. Backing could damage the machine or its components.
SAFETY RMB 1445 11/10 Safety Section 1-8 © 2010 Alamo Group Inc. SAFETY Flail Mowers are capa ble under adverse conditions of throwing objects for great distances ( 300 feet or more) and causing seri ous injury or death. Follow safety messages carefully .
SAFETY RMB 1445 11/10 Safety Section 1-9 © 2010 Alamo Group Inc. SAFETY Do not mount or dismou nt the Tr actor while the tractor is moving. Mount the T ractor only when the T ractor and all moving part s are completely stopped. (SG-12) S tart tr actor only when properly seated in the T ractor seat.
SAFETY RMB 1445 11/10 Safety Section 1-10 © 2010 Alamo Group Inc. SAFETY Do Not operate this equip men t in areas wher e in se ct s such as bees may attack you and/or cause you to lose contro l of the equip ment. If you must enter in such areas, use a tractor with an enclosed Cab and close the windows to pr event insect s from entering.
SAFETY RMB 1445 11/10 Safety Section 1- 11 © 2010 Alamo Group Inc. SAFETY Mow at the speed that you can safely oper ate and control the tractor and mower . The correct mowing spee d depends on terrain cond itio n and grass type, density , and height of cut.
SAFETY RMB 1445 11/10 Safety Section 1-12 © 2010 Alamo Group Inc. SAFETY Maintenance and Service Saf ety Instructions and Practices Make sure the PTO shield , integral driveline shie lds, and input shields are installe d when using PTO-driven equipme nt.
SAFETY RMB 1445 11/10 Safety Section 1- 13 © 2010 Alamo Group Inc. SAFETY Always maint ain the safety signs in go od readab le conditio n. If the safety signs are missing, damaged, or unreadable , obtain and insta ll r eplacement safety signs immediately .
SAFETY RMB 1445 11/10 Safety Section 1-14 © 2010 Alamo Group Inc. SAFETY T ransporting Safety Inst ructions and Practices Replace bent or b roken blades with new blades.
SAFETY RMB 1445 11/10 Safety Section 1- 15 © 2010 Alamo Group Inc. SAFETY Secure the boom an d mower head in the transpo rt position before traveling o n public roads. Never transport on public roads with t he boom and mower hea d extended. Always disengage and lock out the hydraulic controls for the boom mower be fore transporting.
SAFETY RMB 1445 11/10 Safety Section 1-16 © 2010 Alamo Group Inc. SAFETY Concluding Safety In structions and Practices T ransport only at speeds where you can maint ain control of the equipment. Seriou s accidents and injuries can result from operating this equipment at high sp eeds.
SAFETY RMB 1445 11/10 Safety Section 1- 17 © 2010 Alamo Group Inc. SAFETY Decal Location NOTE: Bush Hog supplies safety decals on this produ ct to promote safe oper ation. Dam age to th e decals ma y occur while in shippin g, use, or rec onditioning.
SAFETY RMB 1445 11/10 Safety Section 1-18 © 2010 Alamo Group Inc. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. D433 1 Decal Multiple Hazard 2. D388 1 Decal Driveline Hazards 3. D355 1 IMPOR T ANT Check Chains 4. 02962764 6 W ARNING Pinch Points/Scissors 5.
SAFETY RMB 1445 11/10 Safety Section 1- 19 © 2010 Alamo Group Inc. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. 500610 49 1 LOGO Bush Hog (22” ) 2. 24028 1 W ARNING Rubber Deflectors 3. 02965141 1 WARNING Thrown Object s 4. 1290738 1 INSTRUCT Euro Fla il Head Multi-Instruction 5.
SAFETY RMB 1445 11/10 Safety Section 1-20 © 2010 Alamo Group Inc. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. 3688303 1 DANGER Sh arp Blad e s 2. 09.821.35 1 MUL TI-DECA L Euro Multi-Decal 3. 1458392 1 REFLECT Red Reflector 4. 1458393 2 REFLECT Y ellow Reflector 5.
SAFETY RMB 1445 11/10 Safety Section 1- 21 © 2010 Alamo Group Inc. SAFETY Decal Description Multi Hazard Decal Sheet P/N D433 Decal D433 consists of the following multi-hazards.
SAFETY RMB 1445 11/10 Safety Section 1-22 © 2010 Alamo Group Inc. SAFETY Driveline Hazards P/N D388 Decal D388 consist s of th e following multi-hazards.
SAFETY RMB 1445 11/10 Safety Section 1- 23 © 2010 Alamo Group Inc. SAFETY IMPOR T ANT! Keep Sway Bar Chains T ight P/N D355 W ARNING! Pinch Points P/N 02962764 DANGER! Crushing and Pinch Point s. Moving machinery p arts can pinch or crush or fall- which may cause injury or death.
SAFETY RMB 1445 11/10 Safety Section 1-24 © 2010 Alamo Group Inc. SAFETY DANGER! Crushing Hazard Serious injury can result fr om contact with moving boom.
SAFETY RMB 1445 11/10 Safety Section 1- 25 © 2010 Alamo Group Inc. SAFETY INFORMA TION - Safety Booklet D524 Slow Moving V ehicle Decal. Keep SMV reflector clean and visible. DO NOT transpo rt or operate without the SM V . P/N 83380 Read Operato r ’s Manual! The operator ’s ma nual is located inside this canister .
SAFETY RMB 1445 11/10 Safety Section 1-26 © 2010 Alamo Group Inc. SAFETY TO A VOID SERIOUS INJURY OR DEA TH only operate on T ractor eq uipped with fully enclosed CAB. P/N D569 Grease 8 Hour s P/N 09.810.01 Euro Multi Decal P/N 09.821.35 Euro Multi Decal P/N 09.
SAFETY RMB 1445 11/10 Safety Section 1- 27 © 2010 Alamo Group Inc. SAFETY Euro Flail Multi Decal P/N 1290738 W ARNING! Inspect Rubber Deflector and replace if damaged or notice ably worn.
SAFETY RMB 1445 11/10 Safety Section 1-28 © 2010 Alamo Group Inc. SAFETY Amber Reflector . Keep reflectors clean and visible. P/N 1458393.
SAFETY RMB 1445 11/10 Safety Section 1- 29 © 2010 Alamo Group Inc. SAFETY Federal Laws and Re gulations This section is intended to explain in broad terms the conc ept and effect of federal laws and regulations conce rning employer and employee eq uipment operators.
.
Introduction Section 2-1 INTRODUCTION SECTION.
INTRODUCTION RMB 1445 11/10 Introduction Section 2-2 © 2010 Alamo Group Inc. INTRODUCTION Designed for a wide r ange of mowing applications ar ound the farm, ranch or estate , or for landscape contra.
INTRODUCTION RMB 1445 11/10 Introduction Section 2-3 © 2010 Alamo Group Inc. INTRODUCTION These hydraulically driven hed gecutters are desig ned fo r light-duty work.
INTRODUCTION RMB 1445 11/10 Introduction Section 2-4 © 2010 Alamo Group Inc. INTRODUCTION A TTENTION OWNER/ OPERA TOR BEFORE OPERA TING THIS MACHINE: 1. Carefully read the Operator’s Manual, completely underst and the Safety Messages and instr uctions, and know how to operate correctly both the Mowe r and Power Unit.
Assembly Section 3-1 ASSEMBL Y SECTION.
ASSEMBLY RMB 1445 11/10 Assembly Section 3-2 © 2010 Alamo Group Inc. ASSEMBL Y TRACTOR SELECTION Hitch Requirement 3-Point Hitch ASABE Category I PTO T ype 540 RPM PTO Shaf t T ractor must be equipped with live drive independe nt PTO shaf t to enable forward movement to be halte d while the flail head continues to operate.
ASSEMBLY RMB 1445 11/10 Assembly Section 3-3 © 2010 Alamo Group In c. ASSEMBL Y TRACTOR PREP ARA TION Inst alling the Operator Guard - Cab T ractor Bush Hog strongly recommends installing the RMB 1 445 Boom Mower on a cab tractor equipped with imp act resistant glass windows.
ASSEMBLY RMB 1445 11/10 Assembly Section 3-4 © 2010 Alamo Group Inc. ASSEMBL Y Ballast When attaching a boom mower to a tractor , it is ex tremely impor tant to make the tot al unit as stable as possible. Add ing Ballast or weights to the tr actor may b e necessary to achiev e the guide lines shown below .
ASSEMBLY RMB 1445 11/10 Assembly Section 3-5 © 2010 Alamo Group In c. ASSEMBL Y DEALER SETUP INSTRUCTIONS 1. The machine is delivered in a part ially assembled. T o make ready for attachment to the tractor it will be necessary to select a hard level surface 2.
ASSEMBLY RMB 1445 11/10 Assembly Section 3-6 © 2010 Alamo Group Inc. ASSEMBL Y T OP LINK A TT ACHMENT 1. Fit the machines top link.(Figur e Asm-B- 0086) 2. Raise machine on tractors linkage until the tractor PTO and th e machines gearbox stub shaft are approxi- mately in line.
ASSEMBLY RMB 1445 11/10 Assembly Section 3-7 © 2010 Alamo Group In c. ASSEMBL Y DRIVELINE A TT ACHMENT Before st arting a ssembly , make certain that al l p aint, dir t, and grea se are removed from gear box shaf t. T o ease assembly apply a light coat of gr ease to splines and assemble.
ASSEMBLY RMB 1445 11/10 Assembly Section 3-8 © 2010 Alamo Group Inc. ASSEMBL Y REMOVE TRANSPORT STRAP With PTO engaged, maneuv er the arms into a position that will allow the cutterh ead to be fitted . Fit cutterhead and secure with circlip, washers, and cotter pin.
ASSEMBLY RMB 1445 11/10 Assembly Section 3-9 © 2010 Alamo Group In c. ASSEMBL Y FINAL ASSEMBL Y CHECKS 1. With the arms at half reach and with the flail head cl ear of the ground carry out final adjustment of the lif t arm levelling box to bring the main frame ho rizontal.
ASSEMBLY RMB 1445 11/10 Assembly Section 3-10 © 2010 Alamo Group Inc. ASSEMBL Y When adding hydraulic oil, use only new oil from a sealed barrel. Use d oil or oil from an open barrel may contain high levels of cont amination.
ASSEMBLY RMB 1445 11/10 Assembly Section 3-11 © 2010 Alamo Group In c. ASSEMBL Y RUNNING UP PROCEDURE RMB 1445/1660/1865 - With Flail Head ONL Y 1. Ensure that the rotor control is in “ STOP” positi on, start the tractor , engage PTO and allow the oil to circulate for about 5 min utes before operating the arms.
.
Operation Sec tio n 4- 1 OPERA TION SECTION.
OPERATION RMB 1445 11 /10 Operation Section 4-2 © 2010 Alamo Group In c. OPERA TION RMB 1445 REAR MOUNT BOOM MOWER OPERATING INSTRUCTIONS Bush Hog Boom mowers are man ufactured with quality material by skilled workers. Thes e mowers are designed for cutting gra ss and small weeds.
OPERATION RMB 1445 11 /10 Operation Section 4-3 © 2010 Alamo Group Inc. OPERA TION 1. St andard Equipment and Specifications St andard S pecifications Hitch 3-Point CA T I T ractor PTO Ho rsep ower (Minimum) 45 HP T ractor Weight (Minimum) 4410 lbs.
OPERATION RMB 1445 11 /10 Operation Section 4-4 © 2010 Alamo Group In c. OPERA TION 2. OPERA TOR REQUIREMENTS Safe operation of the unit is the responsibility of a qualifi ed operator .
OPERATION RMB 1445 11 /10 Operation Section 4-5 © 2010 Alamo Group Inc. OPERA TION 3. TRACT OR REQUIREMENTS In addition to tractor horsep ower a nd size re quir ed to o per ate th e mower un it, the .
OPERATION RMB 1445 11 /10 Operation Section 4-6 © 2010 Alamo Group In c. OPERA TION Never operate the T ractor and Mower Unit without an OPS (Operator s Protective S tructure ) or Cab to prevent injury from object s thrown from ground or from overhe ad trimming.
OPERATION RMB 1445 11 /10 Operation Section 4-7 © 2010 Alamo Group Inc. OPERA TION 3.6 T ractor Horsepower The horsepower requir ed to operate the mower depends on many factors including veget ation to be cut, terrai n condition, operato r experience, and condition of th e mower and tractor .
OPERATION RMB 1445 11 /10 Operation Section 4-8 © 2010 Alamo Group In c. OPERA TION 3.10 Power T ake Off (PTO) Depending on the unit, th e mower is designed to opera te at a PT O speed of 540 RPM. Most tractors operate at either 540, or a co mbination of 540 and 1000 RP M PT O speeds.
OPERATION RMB 1445 11 /10 Operation Section 4-9 © 2010 Alamo Group Inc. OPERA TION 4.1 Boarding the T ractor Use both hands and equippe d handrails and steps for supp ort when boarding the tractor . Never use control levers for support wh en mounting the tractor .
OPERATION RMB 1445 11/10 O peration Section 4-10 © 2010 Alamo Group In c. OPERA TION 5. ST ARTING THE TRACTOR The operat or must have a co mplete und erstanding of the p lacement, fun ction, and op erational us e of all tractor cont rols before starting th e tractor .
OPERATION RMB 1445 11/10 O peration Section 4-11 © 2010 Alamo Group Inc. OPERA TION Periodically inspect all moving part s for wear and replace when necessary with au thorized service part s. Look for loose fastener s, worn or broken p arts, and le aky or loose fittings.
OPERATION RMB 1445 11/10 O peration Section 4-12 © 2010 Alamo Group In c. OPERA TION Periodically inspect all moving part s for wear and replace when necessary with au thorized service part s. Look for loose fastener s, worn or broken p arts, and le aky or loose fittings.
OPERATION RMB 1445 11/10 O peration Section 4-13 © 2010 Alamo Group Inc. OPERA TION 6.2 Boom Unit Pre-Operat ion Inspection and Service Inspect and service the boom arm and head pr ior to operation. Damaged and/or broken part s should be repaired and/or replaced immediately .
OPERATION RMB 1445 11/10 O peration Section 4-14 © 2010 Alamo Group In c. OPERA TION FRAME ASSEMBL Y • Ensure all bolt s and screws are in position and are properly to rq ue d . • Ensure all pins are in place and fastened with screws. • Ensure frame is pro perly mounted to tractor and hardware is properly installed and tighten ed.
OPERATION RMB 1445 11/10 O peration Section 4-15 © 2010 Alamo Group Inc. OPERA TION Relieve hydraulic pressure prio r to doing any maintenance or rep air work on the Implement. Place the Mower Head on the grou nd or secur e ly supp orte d on blocks o r st ands, disengage the PTO, and turn off the engine.
OPERATION RMB 1445 11/10 O peration Section 4-16 © 2010 Alamo Group In c. OPERA TION Attention: Oil Filler Cap is also the Pressure Relief Cap. Remove cap slo wly to relieve pressure before re moving cap completely .
OPERATION RMB 1445 11/10 O peration Section 4-17 © 2010 Alamo Group Inc. OPERA TION SICKLE BAR INSPECTION • Inspect blades and blade bolts for looseness and excessive wear . Replace damaged, worn, and missing blades. • Ensure guards ar e in position and not damaged.
OPERATION RMB 1445 11/10 O peration Section 4-18 © 2010 Alamo Group In c. OPERA TION T ractor PRE-OPERA TION Inspection T ractor ID#:___________ _____________Make:________________________ Date:______.
OPERATION RMB 1445 11/10 O peration Section 4-19 © 2010 Alamo Group Inc. OPERA TION Boom Mower PRE-OP ERA TION Inspection Mower ID#:__________________________Make:______________________ Date:________.
OPERATION RMB 1445 11/10 O peration Section 4-20 © 2010 Alamo Group In c. OPERA TION 7. MACHINE CONTROLS.
OPERATION RMB 1445 11/10 O peration Section 4-21 © 2010 Alamo Group Inc. OPERA TION 8. ROT OR CONTROLS Reversing Rotation - With Flailhe ad Select “ROTOR OFF” W ait until the rotor has stopped turn ing. T urn the small lever on the side of the rotor control lever pi vot box 180 degrees.
OPERATION RMB 1445 11/10 O peration Section 4-22 © 2010 Alamo Group In c. OPERA TION 8.1 Angle Float The selection of angle fl oat on the control box simultaneously con nects both gland an d base side of the angling ram to t ank.
OPERATION RMB 1445 11/10 O peration Section 4-23 © 2010 Alamo Group Inc. OPERA TION 8.4 Forward Speed T ractor ground speed is determined b y the material being cut.
OPERATION RMB 1445 11/10 O peration Section 4-24 © 2010 Alamo Group In c. OPERA TION 8.9 Breakaway Action The machine is fitted with a hydraulic breakaway device which protect s the structur e of the machine should a n unforeseen o bstacle be encounter ed.
OPERATION RMB 1445 11/10 O peration Section 4-25 © 2010 Alamo Group Inc. OPERA TION 8.1 1 Cutting Sequence.
OPERATION RMB 1445 11/10 O peration Section 4-26 © 2010 Alamo Group In c. OPERA TION Operator preference will ultimately deci de on the order of cutting. Where it is difficult to determine the original hedge line because of ov ergrowth a recommended method is to start by siding up the hedge first, if necessary making more than one pass.
OPERATION RMB 1445 11/10 O peration Section 4-27 © 2010 Alamo Group Inc. OPERA TION 9. DRIVING THE TRAC TO R AND IMPLEMENT Safe tractor transport req uires the operator to po ssess a thorou gh knowledge of the model b eing operated and precaution s to take while driving with a n attached implement.
OPERATION RMB 1445 11/10 O peration Section 4-28 © 2010 Alamo Group In c. OPERA TION T ransport only at speeds where you can maint ain control of the equipment. Seriou s accidents and injuries can result from operating this equipment at high sp eeds.
OPERATION RMB 1445 11/10 O peration Section 4-29 © 2010 Alamo Group Inc. OPERA TION 9.2 Brake and Differ ential Lock Setting Make sure the tr actor brakes are in good operating condition. T ractor bra kes can be set to operate independently allowing sin gle rear wheel braking action or locked together to provide simult aneous rear wheel braking.
OPERATION RMB 1445 11/10 O peration Section 4-30 © 2010 Alamo Group In c. OPERA TION 9.3 Driving the T ractor and Boom S tart of f driving at a slow speed and gradu ally increase your speed while maintainin g complete control of the tractor .
OPERATION RMB 1445 11/10 O peration Section 4-31 © 2010 Alamo Group Inc. OPERA TION 1 1. OPERA TING INSTRUCTIONS 1. Engage the PTO shaf t at low engine RPM an d speed the engine up after blades are fully engaged. Never engage the PT O shaft at a high engine RPM.
OPERATION RMB 1445 11/10 O peration Section 4-32 © 2010 Alamo Group In c. OPERA TION Mow only in conditions where y ou have clear visibility in daylight or with adequate artificial lighting. Never mow in darkness o r foggy cond itions where you cannot clearly see a t least 300 feet (90 m) in front and to the sides of t he tracto r and mower .
OPERATION RMB 1445 11/10 O peration Section 4-33 © 2010 Alamo Group Inc. OPERA TION 1 1.1 Foreig n Debris Hazards Before mowing, inspe ct the area to make sure there are no fore ign objects that the mo wer blades could hit or b ecome entangled w ith.
OPERATION RMB 1445 11/10 O peration Section 4-34 © 2010 Alamo Group In c. OPERA TION Flail Mowers are capa ble under adverse conditions of throwing objects for great distances ( 300 feet or more) and causing seri ous injury or death. Follow safety messages carefully .
OPERATION RMB 1445 11/10 O peration Section 4-35 © 2010 Alamo Group Inc. OPERA TION 1 1.4 Operating Speed and Ground S peed Ground speed for mowing will depend upon the height, type, and density of veget ation to be cut. Do Not exceed 2 MPH while op erating.
OPERATION RMB 1445 11/10 O peration Section 4-36 © 2010 Alamo Group In c. OPERA TION There are obvio us and hidden potential hazards in the operation of this Mower . REMEMBER! This machine is of ten operated in heavy br ush and in heavy weeds. The Bla des of this Mower ca n throw objects if shields are not pro perly installed and maint ained.
OPERATION RMB 1445 11/10 O peration Section 4-37 © 2010 Alamo Group Inc. OPERA TION 1 1.6 Operating the Attached Mower Heads Refer to the Assembly Sectio n of this manual to ensure the h ead is properly atta ched to the boom hitch an d hydraulic line s are prop erly connect ed.
OPERATION RMB 1445 11/10 O peration Section 4-38 © 2010 Alamo Group In c. OPERA TION 12. TRACT OR, BOOM, AND A TT ACHED HEAD STORAGE Properly prep aring and storing the unit at the end of th e season is critical to maintaining its ap pearance and to help ensure years of depend able service.
OPERATION RMB 1445 11/10 O peration Section 4-39 © 2010 Alamo Group Inc. OPERA TION Never allow children to play on or around T ractor or Implement. Children can slip or fall off the Equipment and be injured or killed. Children can cause th e Implement to shift or fall crushing themselves or others.
OPERATION RMB 1445 11/10 O peration Section 4-40 © 2010 Alamo Group In c. OPERA TION NOTE: Ensure that the mo wer sections are fully raised and that the transp ort locks are engaged for e ach section. Before transp orting the tractor on a public r oadway or boarding a trailer for tran sport, the tr actor brake pedals should be lo cked together .
OPERATION RMB 1445 11/10 O peration Section 4-41 © 2010 Alamo Group Inc. OPERA TION The SMV (Slow-Movin g V ehicle) emblem is universal symbol used to alert drivers of the presence of equipme nt traveling on roadways at a slow speed. SMV signs are a triangula r bright orange with reflective r ed trim for both easy day and night visibility .
OPERATION RMB 1445 11/10 O peration Section 4-42 © 2010 Alamo Group In c. OPERA TION Reduce speed before tur ning or ap plying th e brake s. Ensure that both brake pedals ar e locked together when operating on public roads.
OPERATION RMB 1445 11/10 O peration Section 4-43 © 2010 Alamo Group Inc. OPERA TION Use adequately sized and rated traile rs and equipment to transport the tractor and imp lement. Consult an author ized dealer to determine the prop er equipment required.
OPERATION RMB 1445 11/10 O peration Section 4-44 © 2010 Alamo Group In c. OPERA TION 14. TROUBLESHOOTING GUIDE TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Hydraulic Cylinder Hydraulic level low . Check hydraulic fluid level. Not Working (See sight gauge on tank) Pump not functioning Attempt to use another cylinder or properly .
OPERATION RMB 1445 11/10 O peration Section 4-45 © 2010 Alamo Group Inc. OPERA TION TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Excessive Vibration s Blade Broken. Replace blades, in sets . Blade carrier bent. Replace carrier . Blade hub not properly Remove hub, check t apered spline seated on shaf t shaf t, clean and replace.
OPERATION RMB 1445 11/10 O peration Section 4-46 © 2010 Alamo Group In c. OPERA TION TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Clutch Slips Excessively Clutch linings badly worn or Repair clutch per maintenance plates warp ed. section of m anuals. T oo much power for clutch.
Maintenanc e Sec tio n 5- 1 MAINTENANCE SECTION.
MAINTENANCE RMB 1445 11/10 Maintenance Section 5-2 © 2010 Alamo Group Inc. MAINTENANCE LUBRICA TION General Refer to the lubrication diagram an d grease daily all the points show n. 1. Power take-of f shaft - The PT O shaft should be regularly exam ined to ensure that it is in good condition together with the guar ds.
MAINTENANCE RMB 1445 11/10 Maintenance Section 5-3 © 2010 Alamo Group Inc. MAINTENANCE PTO SHAFT Regularly check the PT O guards for damage a nd ensure the anti rota tion chains are in place and that their anchor point s are in good condition . PTO LUBRICA TION Lubricate the shaf t at the points shown below at t he intervals indicated using N.
MAINTENANCE RMB 1445 11/10 Maintenance Section 5-4 © 2010 Alamo Group Inc. MAINTENANCE CUTTING PTO SHAFT Separate the two PTO half sh afts from one anothe r . 1. Loosen the three screws on driveline shield. 2. Remove the three screws for each shaf t half.
MAINTENANCE RMB 1445 11/10 Maintenance Section 5-5 © 2010 Alamo Group Inc. MAINTENANCE 4. Cut the calculated length of f both male and female shaf t halves to give the requir ed PTO length. 5. De-burr the ends of the cut shaf ts. 6. Cut th e same leng th of f both shield halves as cut from the shafts.
MAINTENANCE RMB 1445 11/10 Maintenance Section 5-6 © 2010 Alamo Group Inc. MAINTENANCE HYDRAULIC SYSTEM Oil Supply Check daily the oil level in the reserv oir . No fixed time period can be quoted for oil changes as operating conditions and maintenan ce standards vary so wid ely .
MAINTENANCE RMB 1445 11/10 Maintenance Section 5-7 © 2010 Alamo Group Inc. MAINTENANCE Hose W arranty W arranty is limited to replacement of hoses which have fa iled due to faulty materials of manufacture. W arranty will not be considered on hoses that have suffered dam age by abrasion, cut s or be ing pinched or trapped while in work.
MAINTENANCE RMB 1445 11/10 Maintenance Section 5-8 © 2010 Alamo Group Inc. MAINTENANCE FLAILHEAD 1. Frequently inspect th e r otor a ssem bly for da mag ed or missin g fla ils. Bolt s and nut s secu rin g the flails to th e rotor should be regula rly checked an d kept tight.
MAINTENANCE RMB 1445 11/10 Maintenance Section 5-9 © 2010 Alamo Group Inc. MAINTENANCE HOSE CONNECTIONS Main Control V alve 1. Supply 2. Return 3. Lift Base 4.
MAINTENANCE RMB 1445 11/10 Maintenance Section 5-10 © 2010 Alamo Group Inc. MAINTENANCE.
.
LIMITED W ARRANTY Bush Hog warrant s to the origina l purchaser of any new Bush Hog equipment, purchas ed.
T O THE OWNER/OPERA TOR/DEALER T o keep your implement running ef ficiently and safely , read your manual thoroughly a nd follow these directions and the Safety Messages in this Manua l. The T able of Contents clearly id entifies each section wher e you can easily find the informa tio n yo u ne ed .
RMB 1445-1 1/10 P/N 50068815C Printed U.S.A RMB 1445 REAR MOUNT BOOM MOWER.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Bush Hog RMB 1445 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Bush Hog RMB 1445 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Bush Hog RMB 1445, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Bush Hog RMB 1445 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Bush Hog RMB 1445, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Bush Hog RMB 1445.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Bush Hog RMB 1445. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Bush Hog RMB 1445 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
