Manuel d'utilisation / d'entretien du produit MD-300Np-360P du fabricant Brickcom
Aller à la page of 34
0 Hardware Use r ’ s Manua l Megapixel Day & Night Mini Dome Network Camera Quality Service Grou p MD -500Ap & MD- 300N Series.
- - Review His tory: 1. Sep arate User Man ual into H W and SW . 2. Merge MD-500A p/ MD -400Ap/MD-300A p/MD-200A p/MD-300Np/MD-200N p/MD-130Np into this User Manual. Product name: Network Camera ( MD - 100A series) Release Date: 2012 / 05 Manual Revi sion: V3 .
- - T able of Conte nt s Before Y ou Use This Pro duct ................................................................................ 1 FCC Warni ng ................................................................................................... 1 Regulatory In formation .
1 Before Y ou Use This Pro duct In many countries, there are laws prohibiting or restricting the use of surveillance devices. This Network Camera is a high-pe rformance, w e b-ready camera which can be part of a f lexible surveillanc e system.
- - Regulatory Information Federal Commu nication Commission I nterference State ment This equipmen t has bee n tested and found to co m ply w ith the limits f or a Class B dig ital device, pursuant to Part 15 o f the FCC Rules.
- 3 - Package Content s Please check to make sure that the p roduct package cont a ins a ll the accessories listed below . a. MD -5 00A Series/ M D- 300Np Series b. Product CD c. Adjustin g Lens T ool d. Allen Key e. Warranty Card f. Screw Bags(2pcs) g.
- 4 - Product Comp arison Model Name Lens Focal Length Cable Type Power Input USB port for 3G/ 4G DC12V PoE 802.3af M12 MD - 500 A Series MD -500Ap- A1 f=4.00mm RJ45, DC12V - - MD -500Ap- A2 f= 3.60 mm RJ45, DC12V - - MD -500Ap- B1 f=4.
- 5 - Mini Dome Net w ork Camera Overvi ew The Brickcom MD-500A series/ MD-300N se ries is a mini dome network camera designed for outdoor u se. MD -500A series/ MD-300N series has a com pact and stylish design, also provides Full HDTV v ideo (1080p @ 30fps).
- 6 - equipped with a special designed mounting adapter a nd can be inst alled on a curv e d surface. The camera supports different power input s such a s PoE 802.
- 7 - Device Appearance Description ( *) These are optional features. Please refer to the Product List for the full lis t of optional features that are available for this product.
- 8 - Inst allation Hard w are Inst allation WARNING: Do not mount the camera on a soft material. The camera may fall and be damaged. 1. Use the en closed Allen key to detach the dome cover from the camera device. As remove the cover , please be aware of th e Microphone Line.
- 9 - 3. Choose the location on the wall or ceiling to place th e camera. Attach the location sticke r to the desired spot. For ceiling installation, the best place to mount the camera is into a ceiling stud. 4. Drill three ho les through the center of the three location holes on the sticker.
- 10 - 6. Please use the “ Waterproo f T ape ” to w r ap around the R J45 connector , DC12V connecto r , USB connector (*), in o rder to prev ent water to seep in to the conne ctors. 7. T he user needs the three screw s which are included in the product package an d a screwdriver .
- 11 - Lens Adju stment 1. Please use the ” Adjusting Lens tool ” to adjust the lens to the desired position. 2. Focus a. Rotate the lens until the image in the Live View page is fo cused.
- 12 - b. If us ing a non -PoE switch : i. Use a standard RJ-45 cable t o connect the cam er a to a P oE Injector . ii. Use a standard RJ-45 cable t o connect the P oE Injector to the n on-PoE swi tch. iii. Use a standard power cable to connect the P oE Injector to a power outlet.
- 13 - LED Behavior Function LED Behavior Description Remark Status Steady On Normal Operation Blue Status Unl it 1. Power off 2. Power on till System setup Blue Status Upgrading F/ W Blue Internet Bl.
- 14 - Hardware Reset The Reset Button can be used to reboot the camera or restore it to fa ctory def ault settings. If the camera experiences a problem, reboot ing the camera may correct the problem. If the problem remains, p lease restore the camera to factory default settings and reinstall the software.
- 15 - System Requirement s Operating System: Microsoft Windows XP Home Edition SP2 Microsoft Windows XP Professional SP2 Computer: IBM PC/AT Compatible CPU: Pentium 3GHz or faster Memory: 1024 MB or .
- 16 - Sof tware Inst allation In this manual, "Us er" refe rs to w hoever has access t o the Netw o rk Camera, and "Administrator" refers to the person who can configure th e camera and grant user access to the camera.
- 17 - 2. In the Install Shield Wizard dialog box, click <Next> to continue. 3. Read the End- User License Agreement and check the option “I accept th e terms of th e license agreement”.
- 18 - 4. Select either “Complete” s etup or “Custom” setup to install the system. a. If COMPLETE SETUP is selected: i. A ll program features will be installed into the default d irectory. Check the option “ Complete ” and then click <Next>.
- 19 - iii. Select to create shortcuts . Click < Next > to continue. iv. The installatio n information will be displayed. Click <Next> to co ntin ue .
- 20 - v. T o launch EasyConfig or PC -NVR S tandard, select the application and click <Finish> . W hen launching the PC -NVR program, please refer to the PC -NVR user manual. b. If CUSTOM SETUP is selected: i. This option is recommended f or advanced users.
- 21 - iii. Select the features to install. Click <Next> to continue. iv. Click < Change > to change the appointed f older where installation and program files will be stored.
- 22 - v. Select programs to create shortcuts. Click <Nex t> to continue. vi. The installation information wil l be displayed. Click <Next> to contin ue .
- 23 - 5. To launch EasyConfig or PC-NVR Standard, select the application and click <Finish> . W hen la unching the PC-NVR program, please refer to the PC -NVR user manual.
- 24 - EasyConfig T o launch Ea syConfig, select EasyConfig from the start menu. If Complete Setup type was used in th e software installation, an EasyConfig icon was installed on the desktop.
- 25 -.
- 26 - 2. Select either “S imple M ode ” or “P rofessional M ode ” to o btain the camera’s IP settings. If “S imple M ode ” is selected, EasyConfig w i ll set up the connecti on automatically . I f “P rofessional Mode ” is selected, the user will need to configure the IP settings manually .
- 27 - 4. Enter the username and password of the camera. For f irst time use, the default username and password are “ admin/admin .” 5. For co nfiguring the IP address settings, select either <Settings rem ain the same> , <Automatically obtain an IP Address (DHCP)> or <Set IP Address co nfiguration manually>.
- 28 - a. If < Set I P Address configuration manually> is se lected, th e following p a ges will be displayed..
- 29 - 6. If the camera support s the EasyLink TM function , the following page w ill be displayed. Otherwise, this page will not be shown. *If desired, c lick <Skip> to skip this setting. EasyLink TM is a unique Brickcom function which a llows users to assign a unique EasyLink name to their netw o rk camer a’s IP address.
- 30 - 7. W hen the IP address se ttings have been con figured , the screen will either display a successful or failed connection message. If the connection failed, either try again or quit the installation. a. If “ DHCP IP address settings” was selected, t he failure page will b e display ed as below: b.
- 31 - c. If the connection was successful, the user will see the message: “Congratulations. The installation o f the camera is complete.” W hen this window is displa yed, click < PC -NVR > .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Brickcom MD-300Np-360P c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Brickcom MD-300Np-360P - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Brickcom MD-300Np-360P, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Brickcom MD-300Np-360P va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Brickcom MD-300Np-360P, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Brickcom MD-300Np-360P.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Brickcom MD-300Np-360P. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Brickcom MD-300Np-360P ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
