Manuel d'utilisation / d'entretien du produit XD-15c du fabricant BOXLIGHT
Aller à la page of 32
BOXLIGHT XD-15c User’s Guide.
Copy right Copyright © 2002 b y BOXLIGHT Corporation. All rights reserved. No part of this publication may be reproduced, transmi tted, tr anscribed, stored in a retrieval system or translated into a.
BOXLIGHT XD-15c Use r’s Guide Table of Contents iii Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BOXLIGHT XD-15c Use r’s Guide Table of Contents iv Optional Accessories (Not Included in the Standard Package) . . . . . . . . . 23 Ordering Parts or Gettin g Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Troubleshooting .
Introduction 1 BOXLIGHT XD-15c User’s G uide INTRODUCTION Caution TO PREVENT SHOCK, DO NOT OPEN THE CABIN ET. NO USER –SER- VICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SER- VICE PERSONNEL. PLEASE READ THIS USER’S GUIDE BEFORE YOU OPERATE YOUR PROJECTOR.
Introduction 2 BOXLIGHT XD-15c User’s G uide Warranty LIMITED WARRANTY Bo xligh t ("Bo xlight ") w arrants that each XD-1 5c ("the Pr oduct") sold her eunder will con- form to and function in acco rd ance with the written specif ications of Bo xlight.
Introduction 3 BOXLIGHT XD-15c User’s G uide LIMITATION OF LIABILITY IT IS UNDERST OOD AND A GREED THA T BO XLIGHT'S LIAB ILITY WHE THER IN CONTRA C T, IN T OR T, UNDER ANY W ARRANTY , IN NEGLI.
Introduction 4 BOXLIGHT XD-15c User’s G uide Shipping Contents The projector is shipped with the ca bles required for connection t o standard PC or laptop computers. Carefully unpack and verify that you have all the items shown below . If any of these items are miss ing, please contac t BOXLIGHT.
Introduction 5 BOXLIGHT XD-15c User’s G uide Projector Description Projector 1. External control panel (see next page) 2. Projection lens 3. Front adjustment feet 4. IR remote sensor 5. Ventilation grill 6. Kensington lock 7. AC power cord input 8. S-video connector 9.
Introduction 6 BOXLIGHT XD-15c User’s G uide External Control Panel • The Infrared Remote Receiver (F ront and Rear) allows the projector to accept signals from the remote c ontrol. For best resu lts, be sure to aim the control toward the sensor without any obstructions between the two, and at a distance no greater than 6 meters (20 fe et).
Introduction 7 BOXLIGHT XD-15c User’s G uide Adjuster The projector is equipped wi th a quick-release adju ster foot and button for adjusting its tilt angle. 1. Lift the projector up and pres s the adjuster butto n to release the adjuste r. 2. The adjuster will drop into position and be locked.
Introduction 8 BOXLIGHT XD-15c User’s G uide Remote Control D escription Remote Control Features The remote control sensors are located in the front/ back of the projector. The distance between the sensor and the remote control should not exceed 6 meters (20 feet).
Introduction 9 BOXLIGHT XD-15c User’s G uide FREEZE The image can be frozen when FREEZE is pr essed. A “Pause” icon w ill appear in the lower right corner of the screen for three seconds. To release the freeze function, press the FREEZE button, RETURN butto n or SOURCE button (w hen the input source is switched over during display) agai n.
Introduction 10 BOXLIGHT XD-15c User’s G uide Installing or Replacing Batteries • Push and slide the battery co mpartment lid in the direction shown. • Install batteries as indicated by the diagram inside the compartment. • Position the lid over the c ompartment and snap it back into place .
Installation 11 BOXLIGHT XD-15c User’s G uide INSTALLATION Screen Size Place the projector at the require d distance from the screen according to the desi red picture size (see the table bel ow). Connecting to Various Equipment It only takes a few seconds to connect your projector to your com puter/notebook, VCR or other systems.
Operation 12 BOXLIGHT XD-15c User’s G uide OPERATION Start Up 1. Plug the power cord into a wall socket. 2. Press POWER for 1 second. • The back-lit POWER key blinks green and stays green when the power is turned on. (When the power is turned off, there is a 60-second coolin g period before the projector can be re-starte d.
Operation 13 BOXLIGHT XD-15c User’s G uide Digital Keystone Correction Keystoning refers to the s ituation where the projec ted image is noticeably wider at either the top or bottom.
Operation 14 BOXLIGHT XD-15c User’s G uide Source Selection When several input sources are available, press the SOURCE key to make a selectio n from the control pan el of the projecto r or the remote c ontrol. Menu System Press Menu for the main menu and press 3 or 4 to select a sub-menu.
Operation 15 BOXLIGHT XD-15c User’s G uide 1. Display Menu Keystone Corrects an y k ey stoning of the image. Brightne ss A djusts the brigh tness of the image. Contrast A djusts the degree of difference betw een darkness and lightness of the image. Phase A djusts to a v oid the occurrence of f lick er .
Operation 16 BOXLIGHT XD-15c User’s G uide 2. Image Menu Auto resize Mak es the be st f i t of the image to t he screen, H-position A djusts the horizontal position of the projected image. V-position A djusts the v ertical positon of the projected image.
Operation 17 BOXLIGHT XD-15c User’s G uide 3. Source Menu Mirror 1. Default 2. Ceiling - mounted projection 3. Rear screen projection 4. Ceiling - mounted and rear screen projection Source Selects sources betw een PC, Video, S-Video, and Y PbPr . Volume A djusts the v olume lev e l.
Operation 18 BOXLIGHT XD-15c User’s G uide 4. Control Menu 5. PIP Menu These functions are valid only whe n the input mode is PC and th e PIP source is Video or S-Video.
Operation 19 BOXLIGHT XD-15c User’s G uide Shutdown 1. Press POWER and a warni ng message will prompt u p. To turn off the proj ector, Press POWER again. 2. The fan will continue to run for approximately 60 seconds. 3. Disconnect the powe r cord from th e wall socket.
Maintenance 20 BOXLIGHT XD-15c User’s G uide MAINTENANCE Lamp Information Use and Replacement of Lamp When the Lamp Indicator lights up red or a message appears suggesting the time of lamp replacement, please inst all a new lamp or consult yo ur dealer.
Maintenance 21 BOXLIGHT XD-15c User’s G uide 1. Press the POWER button to switch off the proje ctor. Disconnect the power cord from the outlet and the projector. 2. Loosen the screw and remove the lamp cover. If the lamp is hot, avoid burns by waiting 45 minutes until t he lamp has c ooled.
Maintenance 22 BOXLIGHT XD-15c User’s G uide Caution To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before repla cing the lamp. To reduce the risk of inju ries to fingers and damage to intern al components, use caution wh en removing lam p glass that has shat tered into sharp pieces.
Maintenance 23 BOXLIGHT XD-15c User’s G uide Service Information Accessories (Included in the Standard Package) Optional Accessories (Not Included in the Standard Package) Ordering Parts or Getting .
Troubleshooting 24 BOXLIGHT XD-15c User’s G uide TROUBLESHOOTING Common Problems & Solutions PROBLEMS TRY THESE SOLUTIONS NO POWER • Plug the power cord into the AC inlet. • Plug the power cord into the power inlet. • Wait two minutes after the projector is turned o ff before turning the projector back on.
Troubleshooting 25 BOXLIGHT XD-15c User’s G uide Status Messages On Screen Messages Description SEARCHING Pr ojector is searching fo r input. INPUT SIGNAL DETECTED, ACTIVATING AUTO IMAGE Pr ojector has identif ied the input signal and is running t he auto image adjustment function.
Specifications 26 BOXLIGHT XD-15c User’s G uide SPECIFICATIONS Projector Specifications Technical Specifications Note: All specifications are sub ject to change without notice. General Product name Personal Projector Model name BOXLIGHT XD-15c 1024X768 XGA Optical Display system 1-CHIP DMD Lens F/Number F/2.
Specifications 27 BOXLIGHT XD-15c User’s G uide Timing Chart Resolution H Sync (kHz) V Sync (Hz) Remark 640x350 31.5 70.1 640x400 37.9 85.1 VESA 720x400 31.5 70.0 720x400 37.9 85.1 VESA 640x480 31.5 60.0 VESA 640x480 37.9 72.8 VESA 640x480 35.0 66.7 Macintosh 640x480 43.
Dimensions 28 BOXLIGHT XD-15c User’s G uide DIMENSIONS 220mm 175 mm 52mm.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté BOXLIGHT XD-15c c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du BOXLIGHT XD-15c - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation BOXLIGHT XD-15c, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le BOXLIGHT XD-15c va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le BOXLIGHT XD-15c, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du BOXLIGHT XD-15c.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le BOXLIGHT XD-15c. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei BOXLIGHT XD-15c ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
