Manuel d'utilisation / d'entretien du produit VEZ-400 du fabricant Bosch Appliances
Aller à la page of 68
VEZ-400 Mini PTZ Dome VEZ-400 Series en User Manual.
.
VEZ-400 Mini PTZ Dome Table of Cont ents | en 3 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 T able of Contents 1S a f e t y 5 1.1 Safety precautions 5 1.2 Important safety instructions 6 1.3 Important notices 7 1.4 FCC & ICES compliance 10 1.
4 en | Table of Cont ents VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 7.3.2 Reboot 34 7.3.3 Initialize 34 7.3.4 Password 35 7.4 Display Setup 36 7.4.1 OSD Setup 36 7.4.2 Privacy Zone 37 7.4.3 Image Setup 39 7.
VEZ-400 Mini PTZ Dome Safety | en 5 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 1S a f e t y Before installing and operating the camera, please read this manual carefully.
6 en | Saf e ty VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 1.2 Impor tant safety instr uctions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow these instructions.
VEZ-400 Mini PTZ Dome Safety | en 7 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 1.3 Impor tant notices All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at le ast 3 mm in each pole, into the electrical installation of the buildi ng.
8 en | Saf e ty VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Camera signal - Protect the cable with a primary protector if the camera signal is beyond 140 feet, in accordance with NEC800 (CEC Section 60 ) .
VEZ-400 Mini PTZ Dome Safety | en 9 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible.
10 en | Saf e ty VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. SELV - All the input/output ports ar e Safety Extra Low Voltage (SELV) circuits. SELV circuits should only be connected to other SELV circuits.
VEZ-400 Mini PTZ Dome Safety | en 11 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 interference when the eq uipment is operated in a commercial environment .
12 en | Saf e ty VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. – cet appareil ne pe ut pas provoquer d'interfé rence nuisible et – cet appar.
VEZ-400 Mini PTZ Dome Safety | en 13 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Au besoin, l’utilisateur cons ultera son revendeur ou un technicien qualifié en radio /télévision, qui procédera à une opération corrective.
14 en | Saf e ty VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Copyright This manual is the intellectual property of Bosch Security Systems and is protected by co pyright.
VEZ-400 Mini PTZ Dome Description | en 15 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 2 Description This manual is a reference for programming and operating the VEZ-400 Mini PTZ Dome camera. It contains information about features, commands, an d operation methods.
16 en | Unpackin g VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 3 Unpacking This equipment should be unpack ed and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately.
VEZ-400 Mini PTZ Dome Unpacking | en 17 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3.2 Additional T ools Required – No. 2 Phillips screwdriver – Drill with approp riate bit for pre-drilling anchor holes – Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable) 3.
18 en | Installation Overview VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 4 Installation Over view The VEZ-400 Mini PTZ Dome camera comes with the hardware and installation instructions ne cessary to mount the camera to a ceiling.
VEZ-400 Mini PTZ Dome Installing a Sur face Mount | en 19 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 5 Installing a Sur face Mount Use the following illustration as a guide for installing the camera directly onto the ceiling (surface mount): Figu re 5.
20 en | Installing a Surface Mount VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 1. Determine a secure location that can support the weight of the dome. 2. Use the template (refer to Figu re 6.1 , item 1) to mark the locations of the four screw holes and the cable conduit.
VEZ-400 Mini PTZ Dome Installing a Sur face Mount | en 21 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 screws enough to ensure that the camera base is se cured to the ceiling. 11. Make the necessary Dip Switch settings (described in chapter 4.
22 en | Connection VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 6 Connection After the camera is mounted, connect the video, control, and power cables. CAUTION! Do not connect power to the camera until all other connections are made.
VEZ-400 Mini PTZ Dome Connection | en 23 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Use the following illustration as a guide for preparing and connecting the wiring: Figu re 6.
24 en | Connection VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Use a 2-wire (shielded ), half-dup lex, differential, multi-drop with the following attributes: Ta b l e 6 .
VEZ-400 Mini PTZ Dome Connection | en 25 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 6.2 Video Connection Coaxial cable terminated with a male BNC connector is the most common method for transm itting composite video from the camera to a monitor.
26 en | Connection VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Connecting the Alarms Use the following table to conn ect alarm wires to the 8-pin terminal block from the c amera: Ta b l e 6 . 4 8-pin T erminal Block Connections 6.
VEZ-400 Mini PTZ Dome Connection | en 27 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Figu re 6.2 Dome Camera Switc hes Figu re 6.3 Close-up of Ro tar y Switche s and Dip Switche s CAUTION! To prevent humidity problems, the camera’s dome cover must be removed only in dry conditions.
28 en | Connection VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 6.5.1 Setting the address (ID) of the camera To prevent faulty operations an d malfunctions, each camera must have an unique address (ID).
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 29 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7 On-Scre en Display (OSD) Menu When the camera is powered-up, the start-up screen appears on the monitor.
30 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Command Action ▲ Move the joystick up to select an item. ▼ Move the joystick down to select an item. ◄ Move the joystick left to select options for an item.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 31 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.2 Main Menu The MAIN MENU provides access to all programmable settings for the camera.
32 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 7.2.1 Editing Titles To edit the title of a function (preset, pattern, tour, scan): 1. Fro m the MAIN MENU , move the joystick to the right (setup menu of preset, pattern , tour, and scan).
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 33 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.2.2 Clearing Saved Functions To clear (delete) indi vidual, saved fun ctions: 1. Select a function in any menu (PRESET/TOUR/PATTERN/ SCAN/ALARM).
34 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 3. Note the system information displayed. Note: The camera ID changes depending on settings. 7.3.2 Reboo t Reboot the system if there are an y problems with controlling or operating the camera.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 35 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3. Select the function to initialize: – ALL: Clear All items saved in the system. – CAM: Clear camera-related settings.
36 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 3. Select the numbers th at comprise the password. 4. Press the key {Tele}. 5. Select the option "Enable." 6.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 37 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 2. Select OSD SETUP . The screen OSD SETUP appears. 3. Select the option "Label Position" to set/change the position of labels.
38 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Wide]. Bosch recommends setting th e size of the mask to be at least twice the size (height and width) of the object being masked.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 39 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.4.3 Image Setup This menu is for changing displayed image settings. To set up image setup: 1. From the MAIN M ENU , select DISPLAY SETUP .
40 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 3. Select the option "MD/FD" to program motion detection and/or face detection. 4. Select the appropriate value: –O f f –M D –F D 5.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 41 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3. Select the desired language: –E n g l i s h – Chinese –D u t c h –F r e n c h –G e r m a n – Italian – Russian –S p a n i s h 7.
42 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 3. Select the option "Focus." 4. Select the appropriate value: –A u t o –M a n u a l –S e m i - A u t o 5.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 43 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3. Select the option "Mode." 4. Select the appropriate value: – Auto Trace White balance (ATW): Aligns the white balance automatically.
44 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. the Digital Slow Shutter (DSS) function is set higher automatically. To set auto exposure settings: 1. Fro m the MAIN MENU , select CAMERA SETUP .
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 45 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 1. From the MAIN M ENU , select CAMERA SETUP . The submenu CAM ERA SETUP appears. 2. Select DAY/NIGHT . The screen D/N SETUP appears.
46 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 1. Fro m the MAIN MENU , select CAMERA SETUP . The submenu CAMERA SETUP appears. 2. Sel ect ADVA NCED . The screen ADVANCED SETUP appears.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 47 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3. Select the option "WDR Setup." 4. Select the value "On." 5. Select the option "WDR Level." 6.
48 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 7.6.1 Gener al Setup This menu controls general functions of the camera: power-up action, turbo speed, preset speed. To set these fu nctions: 1.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 49 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 1. From the MAIN M ENU , select DOME MOTION . The submenu DOME MOTION appears. 2. Select MOTION SETUP . T he screen MOTION SETUP appears.
50 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 1. Fro m the MAIN MENU , select DOME MOTION . The submenu DOME MOTION appears. 2. Sel ect HOME ACTION . The screen HOME ACTION SETUP appears.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 51 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.6.4 Calibration Calibration is a function for automatically correcting an error on the angle of Pan/Tilt. Calibration can be set at Auto or Manual.
52 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 7.7 Preset Setup The camera has a maximum of 210 programmable preset positions. Each of the user-defined presets includes Pan/Tilt/ Zoom.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 53 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.8 Pat tern Setup A Pattern is used to display (o r recall) a memorized, repeated and serial trace of pan, tilt, and zoom.
54 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 7.9 T our Se tup The camera has a maximum of 8 Tours in Pelco protocol mode, and 2 Tours in Bosch protocol mode. Each tour can have 28 configurable items.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 55 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.10 Scan Setup An Auto scan is a PTZ function that moves the camera from one position to another position. The camera has a maximum of 8 programmable scans.
56 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 13. Select the option "DTime" to set the dwell time for the scan. 14. Set the desired time (fro m 3 minute to 60 seconds).
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 57 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3. Select the approp riate alarm number. 4. Select the option "In" to select the alarm input type. 5. Select the appropriate value: N.
58 en | T roub leshoo ting VEZ-400 Mi ni PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc. 8 T roubleshoo ting If problems occur, check th e installation of the camera with the instructions in this manual. Re fer to this guide for further information.
VEZ-400 Mini PTZ Dome T roubleshooting | en 59 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Camera is not working properly (including wrong position of camera). - Power-cycle the camera and power supply, or reset the camera using the configuration menu [Main > System > Reboot].
60 en | T echnical Specif ications VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc. 9 T echnical Specifications Camera Module Imager 1/4" Double Scan,.
VEZ-400 Mini PTZ Dome T echnical Specifications | en 61 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Power Consumption 24 VAC, 85 0mA / 20W (without heater)24 VAC, 2A / 45W .
62 en | Dimensions VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc. 10 Dimensions Figure 10.1 Dimensions - Camera Figure 10.2 Dimensions - Mounting Holes Ø112 (4.41) Ø151.3 (5.96) Ø154 (6.06) 26 (1.02) 79 (3.
VEZ-400 Mini PTZ Dome Bosch Prot ocol | en 63 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 11 Bosch Pro tocol The following table lists camera functions in Bosch protocol.
64 en | Bosch Prot ocol VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc. * SW Version Number displays 5seconds.
VEZ-400 Mini PTZ Dome Pelco Pr otocol | en 65 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 12 Pelco Pro tocol The following table lists camera functions in Pelco protocol. Preset Key Preset Number Operation Example Preset Preset 1-59, 101-250 No.
66 en | Pelco Pro tocol VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc..
.
Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 U.S.A. www.boschsecurity.com © Bosch Security Systems, Inc., 2011.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Bosch Appliances VEZ-400 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Bosch Appliances VEZ-400 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Bosch Appliances VEZ-400, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Bosch Appliances VEZ-400 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Bosch Appliances VEZ-400, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Bosch Appliances VEZ-400.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Bosch Appliances VEZ-400. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Bosch Appliances VEZ-400 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.