Manuel d'utilisation / d'entretien du produit JGP640 du fabricant Bosch Appliances
Aller à la page of 24
GasDowndraft Cooktop Safety Instructions ................... 3-5 Operating Instructions, Tips Controls ............................................................ 6 Cooktop Comparison .................................... 6 Cookware ..................
HELP US HELP YOU... Read this guide carefully. It is intended to help you operate and maintain your new cooktop properly. Keep it handy for answers to your questions. If you don't understand something or need more help, call: GE Answer Center _"_ 800.
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this app ance. IMPORTANT SAFETY NOTICE • The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of Califo.
IMPORTANT SAFETY INSTRUCTIONS (continued) • Do not clean the cooktop with flammable or volatile cleaning fluids. • Do not clean the cooktop when the appliance is in use. • Avoid scratching the cooktop with shal_ instruments, or with rings and other jewelry • Never use the cooktop as a cutting board.
• Do not cover or block the area around the cooktop knobs. This area must be kept clear for proper ventilation and burner performance. • When cooking pork, follow the directions exactly and always cook the meat to an internal temperature of at least 170°F.
FEATURES OF YOUR COOKTOP (continued) Electric Ignition All of the burners on this cooktop are equipped with electric igniters that eliminate the need for standing pilot lights. All the igniters make clicking sounds and spark even when only a single burner is being turned on.
USING YOUR COOKTOP Electric Ignition Your surface burners are lighted by electric ignition, eliminating the need for standing pilot lights with constantly burning flames. In case of a power outage, you can light the surface burners on your cooktop with a match.
Wok Cooking We recommend that you use only a flat-bottomed wok. They are available at your local retail store. USING YOUR COOKTOP (continued) N__// Do not use woks that have _N_a _J_ support rings. Use of these types of woks, with or without the ring in place, can be dangerous.
CAUTION: Be careful when raising or lowering the vent. Be sure pots, pot handles and other objects are clear of the vent cover and cannot be struck or tipped by the vent being raised.
CARE AND CLEANING (continued) Burner Assembly The burner assemblies should be wiped clean often. Turn all controls OFF before removing burner parts. The electrode of the spark igniter is exposed when the top of the burner is removed. Be careful not to push in any surface unit controls while the top of a burner is removed.
BEFORE YOU BEGIN Read these instructions completely and carefully. IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDINANCES. NOTE TO INSTALLER: Be sure to leave these instructions with the consumer.
STEP ! PREPARING FOR INSTALLATION Avoid placing cabinets above the cooktop unit, if possible, in order to reduce the hazards caused by reaching over heated surface units. If the cabinetry is used above the cooktop, allow a minimum 30" clearance between the cooking surface and the bottom of the unprotected cabinet.
STEP 4 PROVIDE ADEQUATE GAS SUPPLY This cooktop is designed to operate on natural gas at 4" of water column pressure or on LP gas at 10" of water column pressure.
STEP 6 INSTALLTHE DOWNDRAFTUNIT Remove the downdraft unit from the packaging. Remove the two screws from the front of both vertical edges of the downdraft unit. Position the downdraft stability brackets with the top edges overlapping the countertop so that the holes in the brackets align with the holes in the downdraft unit.
STEP 7 (continued) INSTALLING THE COOKTOP NOTE: If the cooktop is installed in a 36" base cabinet, the mounting brackets cannot be used because of the interference with the sides of the cabinet. In this case, the cooktop can be secured to the sides of the cabinet using angle brackets (not supplied).
Duct Pieces 6" round, straight 3¼"x 10" straight (_ 6", 90° elbow 6", 45 ° elbow 3¼"x 10" 90 ° elbow (_ 3¼"x 10" 45 ° elbow Equivalent Length* 1ft. (per foot length) 1ft. (per foot length) 15ft. 9ft.
STEP 12 CHECK OPERATION OF DOWNDRAFT To raise the vent, turn the VENT knob to RAISE. Hold the knob at the RAISE position until the vent is fully extended. The vent will automatically stop when it is fully extended or when the VENT knob is released. Remove the ventilator grille, remove the filters and packaging and replace the filters.
This cooktop leaves the factory set for use with natural gas. If you convert to LP gas, keep these instructions and orifices in case you want to convert back to natural gas.
[] CONVERTTHE SURFACE BURNERS @ 1. Remove grates and burner caps. 2. Using the 7 mm nut driver, remove and replace the brass orifice spud inside each burner chimney as follows: • Replace the large orifices with the spuds that are stamped 104. • Replace the small orifices with the spuds that are stamped 82.
[_ CHECK FOR LEAKS When all connections have been made, make sure all cooktop controls are in the OFF position and turn on the main gas supply valve. Use a liquid leak detector at all joints and connections to check for leaks in the system. CAUTION: DO NOT USE A FLAME TO CHECK FOR GAS LEAKS.
QUESTIONS? USE THIS PROBLEM SOLVER PROBLEM BURNERS DO NOT LIGHT BURNERS HAVE YELLOW OR YELLOW-TIPPED FLAMES BURNER FLAMES VERY LARGE OR YELLOW BURNER CONTROL KNOB WILL NOT TURN FAN DOES NOT WORK POSSIBLE CAUSE • Make sure electrical plug is plugged into a live power outlet.
NOTES 22.
We'll Be There With the purchase of your new GE appliance, receive the assurance that if you ever need information or assistance from GE, we'll be there. All you have to do is call-toll-free! GE Answer Center ® 800.626.2000 Whatever your question about any GE major appliance, GE Answer Center ® infbrmation sets_ice is available to help.
YOUR GE COOKTOP WARRANTY WHAT IS COVERED Staple sales slip or cancelled check here. Proof of original purchase date is needed to obtain service under warranty.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Bosch Appliances JGP640 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Bosch Appliances JGP640 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Bosch Appliances JGP640, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Bosch Appliances JGP640 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Bosch Appliances JGP640, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Bosch Appliances JGP640.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Bosch Appliances JGP640. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Bosch Appliances JGP640 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
