Manuel d'utilisation / d'entretien du produit 3122 475 22015en du fabricant Bosch Appliances
Aller à la page of 67
I NTEG R U S Installation and User Instructions en Integrus Language Distribution System.
INTEGRUS | Installation and User Instructions | Safeguards Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en Import ant Safeguards Prior to installing or operating this product always read the Safety Instructions which are available as a separate document.
INTEGRUS | Installation and User Instuctions | T able of content s Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en T able of c ontent s 1 System description and planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTEGRUS | Installation and User Instuctions | T able of cont ents Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 2.5 Configuration and operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTEGRUS | Installation and User Instructions | T able of content s Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 7 T echnical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTEGRUS | Installation and User Instructions | Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en.
INTEGRUS | Installation and User Instructions | Syst em description and planning en | 1 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 1 Syst em desc ription and planning 1 . 1 Syst em overview Integrus is a system for wireless distribution of audio signals via infra-red radiation.
INTEGRUS | Installation and User Instructions | Syst em description and planning en | 2 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 1 .2 Syst em tec hnology 1 .2. 1 I R radiation The Integrus system is based on transmission by mod- ulated infra-red radiation.
1 .2.4 Carriers and channels The Integrus system can transmit up to 8 different car- rier signals (depending on the transmitter type). Each carrier can contain up to 4 different audio channels. The maximum number of channels per carrier is dependent on the selected quality modes.
INTEGRUS | Installation and User Instructions | Syst em description and planning en | 4 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en The cross section of the 3-dimensional radiation pat- tern with the floor of the conference venue is known as the footprint (the white area in figure 1 .
INTEGRUS | Installation and User Instructions | Syst em description and planning en | 5 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 1 .3.4 Object s, sur face s and reflect ions The presence of objects in a conference venue can influence the distribution of infra-red light.
INTEGRUS | Installation and User Instructions | Syst em description and planning en | 6 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en F or concentrically arranged conference rooms, central- ly placed, angled radiators located high up can cover the area very efficiently .
INTEGRUS | Installation and User Instructions | Syst em description and planning en | 7 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en Figure 1 . 1 8 and figure 1 . 1 9 illustrate the effect of over- lapping footprints and differences in signal delays.
INTEGRUS | Installation and User Instructions | Syst em description and planning en | 8 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en Guaranteed rectangular footprints can also be calculat- ed with the footprint calculation tool (available on the documentation CD- ROM ).
1 .5 S ett ing the radiat or delay switc hes As described in section 1 .3.6, differences in the delays of the signals picked up by the receiver from two or more radiators can cause black spots as a result of the multi path effect.
Figure 1 .2 6 and table 1 . 1 illustrate the calculation of the cable signal delay . 1 .5. 1 .2 Det ermining delay switch posit ions by using a delay measuring tool The most accurate way to determine the cable signal delays is to measure the actual signal delay for each radiator as described in the following procedure: 1 .
Figure 1 .27 and table 1 .2 illustrate the calculation of the signal delays and the delay switch positions. 1 .5.2 System wit h two or more t ransmitt ers in one room When radiators in one multi purpo.
Figure 1 .2 8, table 1 . 1 , table 1 .3 and table 1 .4 illustrate the calculation of the extra master-slave signal delay . INTEGRUS | Installation and User Instructions | Syst em description and planning en | 12 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en T able 1 .
INTEGRUS | Installation and User Instructions | Syst em description and planning en | 13 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 1 .5.3 System wit h more than 4 c arriers and a radiator under a balc ony Figure 1 .2 9 illustrates a situation in whic h a radiation signal delay occurs and which can be compensated for .
INTEGRUS | Installation and User Instructions | Syst em description and planning en | 14 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en Black spots can occur in case a transmitter is located in the same room as the radiators. In that case, disable the mini I R radiator of the transmitter with the config- uration menu (see section 2.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 15 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 2 Integrus Transmit t ers 2.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 16 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 3. Auxiliary audio inputs – T wo female XLR con- nectors for extra audio inputs.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 17 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 2.2.2 Mount ing an inter face module in t he transmit ter housing F ollow the instructions below to mount an interface module in the transmitter housing.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 18 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 2.2.3 Upgrading an LB B4502/xx to an I NT - TX T o upgrade an L.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 19 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 8. R emove the rear panel (4 ): • Loosen the screws ( 1 6). Do not lose the (spring) washers ( 1 7). • Pull the connectors ( 1 8 ) of the mains inlet wires and the earth wire out of the mains socket ( 1 9).
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 20 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 9. On the new main P CB ( 2) fasten the flexible cables ( 1 8) to the analogue input/output P CB. T o this end release the catches ( 1 9) on both sides and insert the flexible cable.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 21 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 2.3 Connec tions This chapter gives an overview of typical syst.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 22 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 2.3.4 Connect ing an emergency signal T o use the emergency signal function, a switch (nor- mally-open) must be connected to the emergency switch connector .
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 23 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 2.4 Using t he configurat ion menu 2.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 24 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 2.4.2 Navigate t hrough the menu Operating the menu is always a.
To jump back from a sub- menu to an it em of the Main menu: 1 . T urn the button to move the cursor to the Main menu item number . 2. P ush the button. The item number and title starts blinking. 3. T urn to select another item number . 4. P ush to confirm the selection.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 26 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en Transmitter 32 Channels 4 Setup 4 A Transmission On 4 G C.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 27 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en Example 2: Assign a new user defined name to channel 1 2. (See also section 2.5. 1 1 .) Transmitter 32 Channels 4 Setup .
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 28 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en Example 3: S et c hannel 1 1 to transmit a Stereo signal in Premium Quality, using audio inputs 1 4 (L) and 1 5 ( R) as source.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 29 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 4D Channel 11 Stereo PQ In 12 4D Channel 11 Stereo PQ In 14 4D Channel 11 Stereo PQ In 14 4 D Channel 11 Stereo PQ In 14 1 7 .
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 30 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en Transmitter 10 Channels DCN Transmitter Aux to All Transmitter Standby T ransmitter is transmitting 1 0 channels from D CN.
2.5.4 View fault stat us The fault status of the radiators can be seen in the second screen of the Main menu: When the system detects a failure for the first time, a flashing fault message pops-up on .
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 32 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 2.5.5 Set monitoring opt ions The Monitoring sub-menu (2) is used to set which sig- nal is sent to the monitoring headphone output.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 33 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 2.5.7 Set transmission mode The T ransmission Mode menu item (4A ) is used to select which signals will be distributed over the c han- nels.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 34 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 2.5.9 Set number of c hannels V ia sub-menu item 4C the number of c hannels that will be used can be set.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 35 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 2.5. 1 0 Set channel qualit y and assign inputs to c hannels The audio quality of the channels (mono/stereo, stan- dard/premium) can be set in sub-menu 4D.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 36 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en Menu Item Opt ions Description 4D Channel nn Channel nr .: 00 ... 3 1 Select which c hannel to configure. Qualit y: - Disabled Disable selected channel.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 37 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 2.5. 1 1 Set channel names Each c hannel can be assigned a name via the Channel N ames menu (4F ). This can be ‘Floor’ or one of 30 pre-defined I SO language names.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 38 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en Menu Items Options Descript ion 4G C.Set tings ... Push the button to go to the sub-menu. 4G Carrier n Carrier nr .
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 39 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 2.5. 1 4 Configure auxiliary inputs The way the signals on the auxiliary inputs (Aux-.L and Aux.-R) are handled can be set in the Aux.
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 40 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en The sensitivity screens also displays a level meter for a visu- al indication of the actual signal strength: ■ = low level, ■ = high level, ▲ = overflow .
INTEGRUS | Installation and User Instructions | Int egrus T ransmitters en | 41 Bosch Security Systems | 2005-04 | 3 1 22 4 75 220 1 5en 2.5. 1 9 Reset all options t o fact ory default values U se menu item 4P to reset all options to the factory defaults.
INTEGRUS | Installation and User Instructions | Integrus Radiat ors en | 42 Bosch Security Systems | 2005-04 | 3122 475 22015en 3 Integrus Radiat ors 3.
INTEGRUS | Installation and User Instructions | Integrus Radiat ors en | 43 Bosch Security Systems | 2005-04 | 3122 475 22015en 3. 1 .2 Radiat or stat us indicat ion A radiator consists of two I RE D panels. Each I RE D panel has an amber and a red indicator LE D (see figure 3.
INTEGRUS | Installation and User Instructions | Integrus Radiat ors en | 44 Bosch Security Systems | 2005-04 | 3122 475 22015en Mounting on a floor st and The top of the floor stand is screwed into the suspen- sion bracket (figure 3.
INTEGRUS | Installation and User Instructions | Integrus Radiat ors en | 45 Bosch Security Systems | 2005-04 | 3122 475 22015en The radiator (plus suspension bracket) is attached to the wall bracket by sliding the mounting bolt over the slot on the wall bracket and then tightening it (see figure 3.
INTEGRUS | Installation and User Instructions | Integrus Radiat ors en | 46 Bosch Security Systems | 2005-04 | 3122 475 22015en 3. 1 .5 Using t he output power select ion switch The radiators can be switched to half power . This can be used when full power is not required, e.
INTEGRUS | Installation and User Instructions | Integrus Radiat ors en | 47 Bosch Security Systems | 2005-04 | 3122 475 22015en The following are found on the radiator printed circuit board: (Figure 3. 1 3): Figure 3. 1 3 LB B 34 1 0/05 Radiator ( PCB) 5.
INTEGRUS | Installation and User Instructions | Integrus Receivers en | 48 Bosch Security Systems | 2005-04 | 3122 475 22015en 4 Integrus Rec eivers 4.
4.2 Operation The receiver cannot operate when no headphone is connected. After connecting the headphone the receiv- er switches to stand-by mode. P ush shortly on the on/off button to switc h the receiver on. The channel number is shown on the L CD display .
INTEGRUS | Installation and User Instructions | Integrus Charging Unit s en | 50 Bosch Security Systems | 2005-04 | 3122 475 22015en 5 Integrus Charging Unit s 5. 1 De script ion The charging units can rec harge up to 56 receivers at once. The charging unit contains the power supply with automatic mains voltage selection.
INTEGRUS | Installation and User Instructions | Integrus Charging Unit s en | 51 Bosch Security Systems | 2005-04 | 3122 475 22015en 5.2 Wall mounting t he charging c abinet LBB 4560/ 50 is suitable for either table-top or wall- mounted use. It can be wall-mounted using 5 mm (0.
INTEGRUS | Installation and User Instructions | T roubleshooting en | 52 Bosch Security Systems | 2005-04 | 3122 475 22015en 6 Troubleshoot ing In this chapter a simple fault-finding guide is given. This is intended to be used to remedy the conse- quences of incorrect installation.
INTEGRUS | Installation and User Instructions | T roubleshooting en | 53 Bosch Security Systems | 2005-04 | 3122 475 22015en Actions • Check that the charging unit is used under the specified working conditions (see technical data). • Check that the receiver contains a battery pack which is connected cor- rectly .
INTEGRUS | Installation and User Instructions | T echnic al Data en | 54 Bosch Security Systems | 2005-04 | 3122 475 22015en 7 Tec hnical Dat a 7 . 1 Syst em Specific ation Overall system c haract eri.
INTEGRUS | Installation and User Instructions | T echnic al Data en | 55 Bosch Security Systems | 2005-04 | 3122 475 22015en 7 .2 Transmit ters and Modules 7 .
INTEGRUS | Installation and User Instructions | T echnic al Data en | 56 Bosch Security Systems | 2005-04 | 3122 475 22015en Elect rical and Opt ical Charac terist ics Number of I RE Ds 260 (LB B 45 1.
INTEGRUS | Installation and User Instructions | T echnic al Data en | 57 Bosch Security Systems | 2005-04 | 3122 475 22015en 7 .4.3 Charging Unit s Physical Charac terist ics Mounting LB B 4560/50: sc.
INTEGRUS | Installation and User Instructions | T echnical Data en | 58 Bosch Security Systems | 2005-04 | 3122 475 22015en 7 .6 Guarant eed rect angular footprints LBB 34 1 0/05 at full power LBB 45 .
INTEGRUS | Installation and User Instructions | T echnical Data en | 59 Bosch Security Systems | 2005-04 | 3122 475 22015en LBB 34 1 0/05 at full power LBB 45 1 1 /00 at full power LB B 45 1 2/00 at f.
INTEGRUS | Installation and User Instructions | Product Index en | 60 Bosch Security Systems | 2005-04 | 3122 475 22015en Produc t index Transmitt ers I NT - TX04 4-channel transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
© 2005 Bosch Security Systems B.V . Data subject to change without notice 2005-04 | 3122 475 22015en For more information please visit www .boschsecuritysystems.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Bosch Appliances 3122 475 22015en c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Bosch Appliances 3122 475 22015en - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Bosch Appliances 3122 475 22015en, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Bosch Appliances 3122 475 22015en va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Bosch Appliances 3122 475 22015en, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Bosch Appliances 3122 475 22015en.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Bosch Appliances 3122 475 22015en. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Bosch Appliances 3122 475 22015en ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
