Manuel d'utilisation / d'entretien du produit NBG-416N du fabricant ZyXEL Communications
Aller à la page of 240
www .zyxel.com www .zyxel.com NBG-416N Wireless N-lite Home Router IMPORT ANT! READ CAREFULL Y BEFORE USE. KEEP THIS GUIDE FOR FUTURE REFERENCE. IMPORT ANT! Copyright © 2012 ZyXEL Communications Corporation V ersion 1.00 Edition 2, 4/2012 Default Login Details LAN IP Address https://192.
NBG-416N User’s Guide 2 IMPORT ANT! READ CAREFULL Y BEFORE USE. KEEP THIS GUIDE FOR FUTURE REFERENCE. Graphics in this book ma y differ slightly from the product due to difference s in oper ating systems, operating system versions, or if y ou installed updated firmware/software fo r your device.
Contents Overview NBG-416N User’s Guide 3 Contents Overview User ’ s Guide ......................................................................................... ......................... ......... 1 1 Introduction ........... ............. ...
Contents Overview NBG-416N User’s Guide 4.
Table of Conten ts NBG-416N User’s Guide 5 Table of Contents Contents Overview ......................... ..................................................... ............................... ..... 3 Table of Contents ................................
Table of Contents NBG-416N User’s Guide 6 3.4.9 WAN MAC Address ...... ............. ................ ............. ................ ............. ................ ....... 35 3.5 Connection Wizard Complete .......... ............ ................. .
Table of Conten ts NBG-416N User’s Guide 7 6.8 WPS Screen ....... .... ... ... ... .... ... ... ............. ... ... .... ... ... ............. ... .... ... ... ... ... ............. .... ... . ......... 86 6.9 WPS S tation Screen ............ ....
Table of Contents NBG-416N User’s Guide 8 Chapter 1 1 Dynamic DNS ............................................................................. ....................................... .... 1 19 1 1.1 Overview ................ ................ ......
Table of Conten ts NBG-416N User’s Guide 9 Chapter 17 T ools ................................................. ..................................................... .................... ............ 143 17.1 Overview .... ................ ..........
Table of Contents NBG-416N User’s Guide 10.
11 P ART I User ’ s Guide.
12.
NBG-416N User’s Guide 13 C HAPTER 1 Introduction 1.1 Overview The NBG-416N extends the r ange of yo ur existing wired network without additional wi ring, providing easy network access to mobil e users. Y our can create the following connections using the NBG-416N: • LAN .
Chapter 1 Int rod uct ion NBG-416N User’s Guide 14 Use a (supported) web browser to mana ge t he NBG-416N. Menus v ary according to which m ode you’re using.
Chapter 1 Introduction NBG-416N User’s Guide 15 1.3 LEDs Figure 2 Front Panel The following table describes t he LEDs and the WPS button. T able 1 Front Panel LEDs and WPS Button LED COLOR STATUS DESCRIPTION POWER Green On The NBG-416N is receiving power and functioning properly .
Chapter 1 Int rod uct ion NBG-416N User’s Guide 16 1.4 The WPS Button Y our NBG-416N supports WiFi Protect ed Setup (WPS), which is an easy way to set up a secure wireless network. WPS is an industry standard specification, defined by the WiFi Al liance.
Chapter 1 Introduction NBG-416N User’s Guide 17 4 Make sure the screws are fastened well enough to hold the weight of th e NBG- 416N with the connection cables. 5 Align the holes on the back of the NBG- 416N with t he screws on the wall. Hang the NBG-416N on the screws.
Chapter 1 Int rod uct ion NBG-416N User’s Guide 18.
NBG-416N User’s Guide 19 C HAPTER 2 The Web Configurator 2.1 Overview This chapter describes how to ac cess the NBG-416N W eb Configurator and provides an ov erview of its screens. The W eb Configurator is an HTML -based management interface that a llows easy setup and management of the NBG-416N via Internet browser .
Chapter 2 The Web Con figurator NBG-416N User’s Guide 20 so you must set y our computer to get an IP address auto matically (computer factory default) or giv e it a fixed IP address in the range between 192.168.1. 3 and 192.168.1.254 (see the appendices).
Chapter 2 The Web Co nfigurator NBG-416N User’s Guide 21 2.3 Resetting the NBG-416N If you forget your password or IP address, or y ou cannot access the W eb Configurator , you will need to use the RESET button at the back of the NBG-416N to reload the fac tory-default configurat ion file.
Chapter 2 The Web Con figurator NBG-416N User’s Guide 22.
NBG-416N User’s Guide 23 C HAPTER 3 Connection Wizard 3.1 Wizard Setup This chapter provides information on the wizard setup screens in the W eb Configurator . The W eb Configur ator’s wizard setup helps y ou configure your device to access the Internet.
Chapter 3 Con n ec tio n Wiza rd NBG-416N User’s Guide 24 2 Choose a language by clicking on the lang uage’ s button. The screen will update. Click the Next button to proceed to the next screen. Figure 7 Select a Language 3 Read the on-screen information and click Next .
Chapter 3 Connection Wizar d NBG-416N User’s Guide 25 3.2.2 Domain Name The Domain Name entry is what is propag ated to the D HCP clients on the LAN.
Chapter 3 Con n ec tio n Wiza rd NBG-416N User’s Guide 26 3.3 Connection Wizard: STEP 2: W ireless LAN Set up your wireless LAN using the following sc reen. Figure 10 Wizard S tep 2: Wireless LAN The following table describes t he labels in this screen.
Chapter 3 Connection Wizar d NBG-416N User’s Guide 27 3.3.1 WP A-PSK or WP A2-PSK Security Choose WPA-PSK or WPA2-PSK security i n the Wireless LAN setup screen to set up a Pre-S hared Key . Figure 1 1 Wizard S tep 2: WP A-PSK or WP A2-PSK Security The following table describes t he labels in this screen.
Chapter 3 Con n ec tio n Wiza rd NBG-416N User’s Guide 28 This wizard screen v aries according to the connection t ype that you select. Figure 12 Wizard S tep 3: ISP Parameters. The following table describes t he labels in this screen, 3.4.1 Ethernet Connection Choose Ethernet when the WAN port is used as a regular Ethernet.
Chapter 3 Connection Wizar d NBG-416N User’s Guide 29 personal computer intera cts with a broadband modem (for example DSL, cable, wireless, etc.) to achiev e access to high-speed data networks. For the service provider , PPPoE offers an access and authentica ti on method that works with existing access control sys tems (for instance, RADIUS).
Chapter 3 Con n ec tio n Wiza rd NBG-416N User’s Guide 30 3.4.3 PPTP Connection P oint-to-P oint T unneling Protocol (PPTP) is a network protocol that enables transfers of data from a remote client to a priv ate server , creating a Virtual Priv ate Network (VPN) using T CP/IP-based network s.
Chapter 3 Connection Wizar d NBG-416N User’s Guide 31 3.4.4 Y our IP Address The following wizard screen allows y ou to assign a fixed IP add ress or give the NBG-416N an automatically assigned IP address depending on your ISP .
Chapter 3 Con n ec tio n Wiza rd NBG-416N User’s Guide 32 3.4.5 W AN IP Address Assignment Every computer on the Internet must have a unique IP address. If your networks are isolated from the Intern et, for instance, only between your two b ranch offices, you can assign an y IP addresses to the hosts without problems.
Chapter 3 Connection Wizar d NBG-416N User’s Guide 33 192.168.1.254 (zero and 255 are reserv ed). In other words, the first three numbers specify the network nu mber while the last number identifies an individual computer on that network.
Chapter 3 Con n ec tio n Wiza rd NBG-416N User’s Guide 34 3.4.8 W AN IP and DNS Server Address Assignment The following wizard screen allows you to assign a fixed W AN IP address and DNS server addresses.
Chapter 3 Connection Wizar d NBG-416N User’s Guide 35 3.4.9 W AN MAC Address Every Ethernet dev ice has a unique MAC (Media Access Cont rol) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
Chapter 3 Con n ec tio n Wiza rd NBG-416N User’s Guide 36 3.5 Connection Wizard Complete Click Apply to complete t he wiza rd setup. Figure 19 Connection Wizard Complete W ell done! Y o u have successfully set up your NBG-416N to oper ate on your network and access the Internet.
NBG-416N User’s Guide 37 C HAPTER 4 Modes 4.1 Overview Y ou can set up the NBG-416N with other IEEE 802.11b/g/n compatible devices in different device modes. Note: Choose your device mode carefully to avoid having to change it later . The NBG- 416N automatically resta rts when you change modes.
Chapter 4 Modes NBG-416N User’s Guide 38 • Access Point : Use this mode if you already ha ve a Rout er (R ) in your net wor k and you want to set up a wireless network and bridge the wired and wireless connections on the NBG-416N .
Chapter 4 Modes NBG-416N User’s Guide 39 4.2 Setting your NBG-416N to Router Mode The NBG-416N is set to wi reless router mo de by default. If it w as changed and now you wa nt to set it back, do t he following procedure. 1 Connect your computer to the LAN port of the NBG-416N.
Chapter 4 Modes NBG-416N User’s Guide 40 4.2.1 S t atus Screen (Router Mode) The screen below shows the status screen in Router mode. Figure 25 S tatus Screen (Router Mode) The following table describes t he icons shown in the Status screen. T able 14 Status Screen Icon Key ICON DESCRIPTION Click this icon to open the setup wizard.
Chapter 4 Modes NBG-416N User’s Guide 41 The following table describes t he labels shown in the Status screen in Router mode. T able 15 Web Configurator Status Screen (Rou ter Mode) LABEL DESCRIPTION Device Information System Name This is the System N ame you enter in th e Maintenance > System > General screen.
Chapter 4 Modes NBG-416N User’s Guide 42 4.2.1.1 Summary: DHCP T able DHCP (Dynamic Host Configur ation Protocol , RFC 2131 and RFC 2132) allows individual clients to obtai n TCP/IP config uration at start -up from a server . Y ou can configure the NBG-416N’ s LAN as a DHCP serv er or disable it.
Chapter 4 Modes NBG-416N User’s Guide 43 Click the DHCP Table (Details...) hyperlink in the Status screen. R ead-only information here relates to your DHCP status. The DHCP table shows current DHCP client i nformation (includi ng IP Address , Host Name and MAC Address ) of all network clients using the NBG-416N’ s DHCP server .
Chapter 4 Modes NBG-416N User’s Guide 44 The following table describes t he labels in this screen. 4.2.1.3 Summary: WLAN St ation St atus Click the WLAN Station Status (Details...) hy p er lin k in th e Status screen. View the wireless stations that are currently associated to the NBG-416N in the Association List .
Chapter 4 Modes NBG-416N User’s Guide 45 The following table describes t he labels in this screen. 4.2.2 Router Mode Navigation Panel Use the menu in the na vigation panel me nus to configure NBG-416N feat ures in Router Mode . Figure 29 Menus: Router Mode The following table describes t he sub-menus.
Chapter 4 Modes NBG-416N User’s Guide 46 Wireless LAN General Use this screen to configure wireless LAN. MAC Filter Use the MAC filter screen to configure the NBG-416N to block access to devices or block the devices from accessing the NBG-416N. Advanced This screen allows you to configure adv anced wireless settings.
Chapter 4 Modes NBG-416N User’s Guide 47 4.3 Setting your NBG-416N to AP Mode 1 Connect your computer to the LAN port of the NBG-416N. 2 The default LAN IP address of the NBG-416N i s 192.168.1.1 in router mode (192.168.1.2 by default in non-router mode ).
Chapter 4 Modes NBG-416N User’s Guide 48 5 Go to Maintenance > Sys OP Mode > General and select Access Point. Figure 30 Maintenance > Sys OP Mode > AP 6 A pop-up window appears pro viding information on this mode. Click OK in the pop-up message window .
Chapter 4 Modes NBG-416N User’s Guide 49 Firmware V ersion This is the current firmw are version of the NBG-416N. LAN Information - MAC Address This shows the LAN Ethe rnet adapter MAC Address of your device. - IP Address This shows the LAN port’ s IP address.
Chapter 4 Modes NBG-416N User’s Guide 50 4.3.2 AP Navigation Panel Use the menu in the navigation pane l to configure NBG-416N features in AP Mode . The following screen and tabl e show the features you can configure in AP Mode .
Chapter 4 Modes NBG-416N User’s Guide 51 The following table describes t he sub-menus. T able 21 Menu: AP Mode LINK TA B FU NCTION Status This screen shows the NBG-416N’s gener al device, system and interface status information. Use this screen to access the wizard, and summary statistics tables.
Chapter 4 Modes NBG-416N User’s Guide 52 4.4 Setting your NBG-416N to Universal Repeater Mode 1 Connect your computer to the LAN port of the NBG-416N. 2 The default LAN IP address of the NBG-416N i s 192.168.1.1 in router mode (192.168.1.2 by default in non-router mode ).
Chapter 4 Modes NBG-416N User’s Guide 53 4.4.1 S t atus Screen (Universal Repeater Mode) Click on Status . The screen below shows the stat us screen in Universal Repeater Mode . Figure 34 S tatus Screen (Universal Repeate r Mode) The following table describes t he labels shown in the Status screen.
Chapter 4 Modes NBG-416N User’s Guide 54 - Operating Channel This shows the channel number which the NBG-416N is currently using over the wireless LAN. - Security Mode This shows the level of wireless security the NBG-416N is using. - 802.11 Mode This shows the IEEE 802.
Chapter 4 Modes NBG-416N User’s Guide 55 4.4.2 Universal Repeater Navigation Panel Use the menu in the navigation pane l to configure NBG-416N features in Universal Repeater Mode . The following screen and tabl e show the features you can configure in Universal Repeater Mode .
Chapter 4 Modes NBG-416N User’s Guide 56 4.5 Setting your NBG-416N to Client Bridge Mode 1 Connect your computer to the LAN port of the NBG-416N. 2 The default LAN IP address of the NBG-416N i s 192.168.1.1 in router mode (192.168.1.2 by default in non-router mode ).
Chapter 4 Modes NBG-416N User’s Guide 57 3 After you’ve set yo ur computer’s IP addre ss, open a web browser such as Internet Explorer and ty pe the IP address of the NBG-416N as the web addr ess in your web browser . 4 Log into the W eb Configurator .
Chapter 4 Modes NBG-416N User’s Guide 58 The following table describes t he labels shown in the Status screen. T able 24 Status Screen (Client Bridge Mode) LABEL DESCRIPTION Device Information System Name This is the Syst em Name you enter in the Maintenance > System > General screen.
Chapter 4 Modes NBG-416N User’s Guide 59 4.5.2 Client Bridge Navigation Panel Use the menu in the navigation pane l to configure NBG-416N features in Client Bridge Mode . The following screen and tabl e show the features you can configure in Client Bridge Mode .
Chapter 4 Modes NBG-416N User’s Guide 60 Maintenance Syst e m Genera l Use this screen to view and change administrative settings such as system and domain names, password and inactivity timer . Time Setting Use this screen to change your NBG-416N’ s time and date.
NBG-416N User’s Guide 61 C HAPTER 5 Tutorials 5.1 Overview This chapter provides tutorials for your NBG-416N as follows: • How to Connect to the Internet from an AP • Configure Wireless Security Using WPS on both your NBG-416N and Wireless Client • Enable and Configure Wireless Sec u rity without WPS on your NBG-416N 5.
Chapter 5 Tutorials NBG-416N User’s Guide 62 There are two WPS methods for creating a secure connection. This tutori al shows you how to do both. • Push Button Config uratio n (PBC) - create a secure wireless network simply by pressing a button. See Section 5.
Chapter 5 Tutorials NBG-416N User’s Guide 63 The following figure shows y ou an example to set up wireless network and securit y by pressing a button on both NBG-416N an d wireless client (the NWD210N i n this example). Figure 40 Example WPS Process: PBC Method 5.
Chapter 5 Tutorials NBG-416N User’s Guide 64 The following figure shows y ou the example to set up wireless network and security on NBG-416N and wireless client (ex.
Chapter 5 Tutorials NBG-416N User’s Guide 65 5.3 Enable and Configure Wireless Security without WPS on your NBG-416N This example shows you how to configure wireless security settings with the following parameters on y our NBG-416N. Fol low the steps below to configure the wireless set tings on your NBG-416N.
Chapter 5 Tutorials NBG-416N User’s Guide 66 5 Open the Status s creen. V erify y our wireless and wireless s ecurity settings under Device Information and check if the WLAN connection is up under Interface Status . Figure 43 T ut orial: S t atus Screen 5.
Chapter 5 Tutorials NBG-416N User’s Guide 67 4 Select SSID_Example3 and click Connect . Figure 44 Connecting a Wireless Client to a Wireless Network t 5 Select WP A-PSK and type the securit y key in the following screen. Click Next . Figure 45 Security Settings 6 The Confirm Sav e window appears.
Chapter 5 Tutorials NBG-416N User’s Guide 68 7 Check the status of your wireless connection in the screen below . If your wireless connection is weak or you have no connection, see the T roubleshooting section of this User’s Guide. Figure 47 Link S tatus If your connection is successful, open your Internet browser and enter http:// www .
69 P ART II T echnical Reference.
70.
NBG-416N User’s Guide 71 C HAPTER 6 Wireless LAN 6.1 Overview This chapter discusses how to configure th e wireles s network settings in your NBG-416N. See the appendices for more detailed information about wireless networks. The following figure provides an example of a wireless network.
Chapter 6 Wireless LAN NBG-416N User’s Guide 72 6.2 What Y ou Can Do Wireless screens vary according to the device mode you are using. See Chapter 4 on page 37 for more information on device modes. •U s e t h e General screen to enable the Wireless LAN, enter the S SID and select the wireless security mode ( Section 6.
Chapter 6 Wireless LAN NBG-416N User’s Guide 73 6.3 What Y ou Should Know Every wireless network must fol low these basic guidelines. • Every wireless client in the same wi reless network must use th e same SSID . The SSID is the name of the wireless netw ork.
Chapter 6 Wireless LAN NBG-416N User’s Guide 74 security). If a wireless client is not allowe d to use the wireless network, it does not matter if it has the correct settings. This type of secu rity does not prot ect the informat ion that is sent in th e wireless network.
Chapter 6 Wireless LAN NBG-416N User’s Guide 75 6.3.1.4 WPS WiFi Protected Setup (WPS) is an industry standard specification, defined by the WiFi Alliance. WPS allo ws you to quickl y set up a wireless network with strong security , without having to conf igure secu rity settings manuall y .
Chapter 6 Wireless LAN NBG-416N User’s Guide 76 Click Netw ork > Wireless LAN to open the General screen. Figure 49 Network > Wireless LAN > General (Router or Access Poin t Mode) Figure 50 Network > Wireless LAN > General (Universal Repeater Mode) The following table describes t he genera l wireless L AN labels in this screen.
Chapter 6 Wireless LAN NBG-416N User’s Guide 77 See the rest of this chapter for informat ion on the other labels in this screen. 6.4.1 No Security Select No Security to allow wireless stations to communicate with the access points without any data encrypti on.
Chapter 6 Wireless LAN NBG-416N User’s Guide 78 Note: If you do not enable an y wireless security on your NBG-416 N, your network is accessible to any wireless networ king de vice that is within range. Figure 51 Network > Wireless LAN > General: No Security The following table describes t he labels in this screen.
Chapter 6 Wireless LAN NBG-416N User’s Guide 79 In order to configure and enable WEP encr yption; click Network > Wireless LAN to display the General screen.
Chapter 6 Wireless LAN NBG-416N User’s Guide 80 6.4.3 WP A-PSK/WP A2-PSK Click Networ k > Wireless LAN to display the General screen. Select WPA-PSK or WPA2-PSK from the Security Mode list. Figure 53 Network > Wireless LAN > General: WP A-PSK/WP A2-PSK The following table describes t he labels in this screen.
Chapter 6 Wireless LAN NBG-416N User’s Guide 81 6.5 MAC Filter The MAC filter screen allows you to co nfigure the NBG-416N to giv e exclusiv e access to up to 16 devi ces (Allow) or ex clude up to 16 devices from accessing the NBG-416N (Deny). Every Ethernet devi ce has a unique MAC (Media Access Control) address.
Chapter 6 Wireless LAN NBG-416N User’s Guide 82 T o change your NBG-416N’ s MAC filter settings, cli ck Network > Wireless LAN > MAC Filter . The screen appears as shown. Figure 54 Network > Wireless LAN > MAC Filter The following table describes t he labels in this menu.
Chapter 6 Wireless LAN NBG-416N User’s Guide 83 6.6 Wireless LAN Advanced Screen Use this screen to allow i ntra-BS S ne tworking and set the R TS/CTS Threshold.
Chapter 6 Wireless LAN NBG-416N User’s Guide 84 CTS Protection When set to None , the NBG-416N protects wireless communication against interference. Select Auto to let the NBG-416N determine whether to turn this feature on or off in the current en vironment.
Chapter 6 Wireless LAN NBG-416N User’s Guide 85 6.7 Quality of Service (QoS) Screen Use the QoS screen to enable Wi fi MultiMedia Quality of Service (WM MQoS). This allows the NBG- 416N to autom atically set priority leve ls to service s, such as e- mail, V oIP , chat, and so on.
Chapter 6 Wireless LAN NBG-416N User’s Guide 86 6.8 WPS Screen Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS status. T o open this screen, click Network > Wireless LAN > WPS tab. Figure 57 Network > Wireless LAN > WPS The following table describes t he labels in this screen.
Chapter 6 Wireless LAN NBG-416N User’s Guide 87 6.9 WPS S t ation Screen Use this screen when y ou want to add a wireless station using WPS . T o open this screen, click Network > Wireless LAN > WPS Station tab .
Chapter 6 Wireless LAN NBG-416N User’s Guide 88 on or off on certain days and at cert ain times. T o open this screen, click Ne twork > Wireless LAN > Scheduling tab. Figure 59 Network > Wireless LAN > Scheduling The following table describes t he labels in this screen.
Chapter 6 Wireless LAN NBG-416N User’s Guide 89 6.1 1 AP Select Screen Use this screen to choose an acc ess point that you want the NBG-416N (in universa l repea ter or cl ient bri dge mo de) to connect to. Y ou should know the security settings of the target AP .
Chapter 6 Wireless LAN NBG-416N User’s Guide 90 6.12 WLAN Info Screen Use this screen to view the SSID and secu rity of the selected AP wireless ne twork when the NBG-416N is in cli ent bridge mode. T o open this screen, click Network > Wireless LAN > WLAN Info tab.
NBG-416N User’s Guide 91 C HAPTER 7 WAN 7.1 Overview This chapter discusses the NBG-416N’ s WAN screens. Use these screens to configure your NBG-416N for Internet access. A WAN (Wide Area Network) connection is an outside connection to another network or the Internet.
Chapter 7 WAN NBG-416N User’s Guide 92 7.2.1 Configuring Y our Internet Connection Encap sulation Method Encapsulation is used to include data from an upper layer protocol into a lower layer protocol. T o se t up a WAN connection to the Internet, y ou need to use the same encapsulation method used by your ISP (Internet Service Provider).
Chapter 7 WAN NBG-416N User’s Guide 93 Otherwise, click Clone the computer's MAC address - IP Addre ss and enter the IP address of the computer on the LA N whose MAC you are cloning. On ce it is successfully configured, the ad dress will be copied to configuration file .
Chapter 7 WAN NBG-416N User’s Guide 94 The following table describes t he labels in this screen. T able 39 Network > W AN > Internet Connectio n: Ethernet Encapsulation LABEL DESCRIPTION ISP Par ameters for Internet Access Connection T ype Y ou must choose the Ethernet option when the WA N port is used as a regular Ethernet.
Chapter 7 WAN NBG-416N User’s Guide 95 7.3.2 PPPoE Encap sulation The NBG-416N supports PPP oE (P oint- to-Po int Protocol o ver Ethernet). PPPoE is an IETF standard (RFC 2516) specif ying how a personal computer (PC) inter acts with a broadband modem (DSL, cabl e, wireless, etc.
Chapter 7 WAN NBG-416N User’s Guide 96 The following table describes t he labels in this screen. T able 40 Network > W AN > Internet Connection: PPPoE Encap sulation LABEL DESCRIPTION ISP Par ameters for Internet Access Connection Ty p e Select PPP over Ethernet if you connect to your Internet via dial-up.
Chapter 7 WAN NBG-416N User’s Guide 97 7.3.3 PPTP Encap sulation P oint-to-P oint T unneling P rot ocol (PPTP) is a network pr otocol that enables secure transfer of data from a remote client to a private server , creating a Virtual Private Network (VPN) using T CP/IP-based network s.
Chapter 7 WAN NBG-416N User’s Guide 98 The following table descri bes the labels in this screen. T able 41 Network > W AN > Internet Connection: PPTP Encap sulation LABEL DESCRIPTION ISP Par a.
Chapter 7 WAN NBG-416N User’s Guide 99 W AN MAC Address The MAC address section allows users to con figure the WAN port's MAC address by either using the NBG-416N’ s MAC address, copying the MAC address from a computer on your LAN or manually entering a MAC address.
Chapter 7 WAN NBG-416N User’s Guide 100.
NBG-416N User’s Guide 101 C HAPTER 8 LAN 8.1 Overview This chapter describes how to configure LAN setti ngs. A Local Area Network (LAN) is a shared communicat ion system to which many computers are attached. A LAN is a computer network limited to the immediate area, usually the same building or floor of a building.
Chapter 8 LAN NBG-416N User’s Guide 102 8.2 What Y ou Need T o Know The actual physical connection determ ines whether the NBG-416N ports are LAN or W AN ports. There are two se parate IP networks, one insi de the LAN ne twork and the other outside the WAN network as shown next.
Chapter 8 LAN NBG-416N User’s Guide 103 8.3 LAN IP Screen Use this screen to change y our basic LAN settings. Cl ick Network > LAN . Figure 68 Network > LAN > IP The following table describes t he labels in this screen.
Chapter 8 LAN NBG-416N User’s Guide 104.
NBG-416N User’s Guide 105 C HAPTER 9 DHCP Server 9.1 Overview DHCP (Dynamic Host Configur ation Protocol , RFC 2131 and RFC 2132) allows individual clients to obtai n TCP/IP config uration at start -up from a server . Y ou can configure the NBG-416N’ s LAN as a DHCP serv er or disable it.
Chapter 9 DHCP Server NBG-416N User’s Guide 106 9.4 General Screen Use this screen to enable the DHCP server . Click Net work > DHCP Server . The following screen displays. Figure 69 Network > DHCP Server > General The following table describes t he labels in this screen.
Chapter 9 DHCP Server NBG-416N User’s Guide 107 T o change your N BG-416N’s static DHCP sett ings, cli ck Network > DHCP Server > Advanced . The following scre en displays. Figure 70 Network > DHCP Server > Advanced The following table describes t he labels in this screen.
Chapter 9 DHCP Server NBG-416N User’s Guide 108 9.6 Client List Screen The DHCP table shows current DHCP client information (including IP Address , Host Name and MAC Address ) of network clients us ing the NBG-416N’ s DHCP servers. Configure this screen to always assig n an IP address to a MAC address (and host name).
Chapter 9 DHCP Server NBG-416N User’s Guide 109 The following table describes t he labels in this screen. T able 45 Network > DHCP Server > Client List LABEL DESCRIPTION # This is the index number of the host computer . IP Address This field displays the IP addr ess relative to the # field listed above.
Chapter 9 DHCP Server NBG-416N User’s Guide 11 0.
NBG-416N User’s Guide 111 C HAPTER 10 Network Address Translation 10.1 Overview This chapter discusses how to configure NA T on the NBG-416N. NA T (Network Ad dress T ranslation - NA T , RFC 1631) is the tr anslation of the IP address of a host in a packet.
Chapter 10 Network Address Tran slation NBG-416N User’s Guide 11 2 Note: Y ou must create a firewall rule in additio n to sett ing up NA T , to allow traf fic from the W AN to be forwarded thro ugh the NBG-416N. 10.2 What Y ou Can Do •U s e t h e General screen to enable NA T and set a default server ( Section 10.
Chapter 10 Network Addre ss Translation NBG-416N User’s Guide 11 3 Note: NA T never changes the IP address (eit her local or globa l) of an outside host.
Chapter 10 Network Address Tran slation NBG-416N User’s Guide 11 4 so incoming reply packets can have their original v alues restored. The f ollowing figure illustr ates this. Figure 73 How NA T Works 10.3 General NA T Screen Use this screen to enable NA T and set a default server .
Chapter 10 Network Addre ss Translation NBG-416N User’s Guide 11 5 10.4 NA T Application Screen Use the Application screen to forward incoming serv ice requests to the server(s) on your local network. Y ou may enter a si ngle port number or a r ange of port numbers to be forwarded, and the local IP address of the desired server .
Chapter 10 Network Address Tran slation NBG-416N User’s Guide 11 6 Ref e r t o Appendix E on page 223 for port numbers commonly used for particular services. Figure 75 Network > NA T > Application The following table describes t he labels in this screen.
Chapter 10 Network Addre ss Translation NBG-416N User’s Guide 11 7 10.5 T echnical Reference The following section contains additional technical information about the NBG- 416N features described in this chapter .
Chapter 10 Network Address Tran slation NBG-416N User’s Guide 11 8 In addition to the servers for specified services, NA T supports a default serv er . A service request that does not have a serv er explicitly designated for it is forwarded to the default server .
NBG-416N User’s Guide 11 9 C HAPTER 11 Dynamic DNS 1 1.1 Overview Dynamic Domain Name Service (DDNS) services le t y ou use a fixed domain name w ith a dynamic IP address. Users can always use the same domain name instead of a different dynamic IP address that changes each time to connect to the NBG-416N or a server in yo ur network.
Chapter 11 Dynamic DNS NBG-416N User’s Guide 120 Dynamic DNS Ty p e This field is only a vailable if y ou use the DynDNS service prov ider . Select the t ype of DNS service you are using. Use Dynamic DNS if you are using a dynamic IP address. Use Static DNS if you are hosting a server with a static IP address.
NBG-416N User’s Guide 121 C HAPTER 12 Firewall 12.1 Overview Use these screens to enable and configure the firewal l that protects your NBG- 416N and your LAN from unwanted or malicious traffic. Enable the firew all to protect your LAN co mput ers from attacks by hackers on the Internet and control access between the LAN and W AN.
Chapter 12 Firewall NBG-416N User’s Guide 122 •U s e t h e Services screen to enable or disable ICMP and VPN passthrough features ( Section 12.5 on page 123 ). 12.3 What Y ou Need T o Know The NBG-416N’ s firewall feature physic ally separates the LAN and the WAN and acts as a secure gateway for all data passing between the networks.
Chapter 12 Firewall NBG-416N User’s Guide 123 12.4 General Firewall Screen Use this screen to enable or disable th e NBG-416N’ s firewall, and set up firewall logs. C lick Security > Firewall to open the General screen. Figure 79 Security > Firewall > General The following table describes t he labels in this screen.
Chapter 12 Firewall NBG-416N User’s Guide 124 The following table describes t he labels in this screen. T able 51 Security > Firewall > Services LABEL DESCRIPTION ICMP Internet Control Message Protocol is a message control and error - reporting protocol between a host server and a gatew ay to the Internet.
NBG-416N User’s Guide 125 C HAPTER 13 Remote Management 13.1 Overview This chapter provides information on the Remote Manage ment screens. Re mote management allows you to determi ne which services/protocols can acces s which NBG-416N interface (if an y) from which computers.
Chapter 13 Remote Management NBG-416N User’s Guide 126 13.1.1 Remote Management Limit ations Re mote management over LAN or W AN will not work when: 1 Y ou have disabled that service in one of the remote management screens. 2 The IP address in the Secured Client IP Address field does not match the client IP address.
Chapter 13 Remote Manag ement NBG-416N User’s Guide 127 13.2 WWW Screen T o change your NBG-416N’ s W orld Wide W eb settings, click Management > Remote MGMT to display the WWW screen. Figure 81 Managemen t > Remote MGMT > WWW The following table describes t he labels in this screen.
Chapter 13 Remote Management NBG-416N User’s Guide 128.
NBG-416N User’s Guide 129 C HAPTER 14 Universal Plug-and-Play (UPnP) 14.1 Overview This chapter introduces the UPnP feature in the W eb Configurator . Universal Plug and Play (UPnP) is a d ist ributed, open networking standard that uses TCP/IP for simple peer -to-peer ne twork connec tivity betwe en devices.
Chapter 14 Universal Plug-and-Play (UPnP) NBG-416N User’s Guide 130 See the NA T chapter for more information on NA T . Cautions with UPnP The automated nature of NA T traversal applications in establishing thei r own services and opening firewall ports may present network security issues.
Chapter 14 Universal Plug-and-Play (UPnP) NBG-416N User’s Guide 131 The following table describes t he labels in this screen. 14.3.1 Using UPnP in Windows XP Example This section shows y ou how to use the UPnP feature in Windows XP . Y ou must already have UPnP installed in Windows XP and UPnP activ ated on the NBG-416N.
Chapter 14 Universal Plug-and-Play (UPnP) NBG-416N User’s Guide 132 3 In the Internet Connection Properties window , click Settings to see the port mappings there were automatically created. Figure 84 Internet Con nection Properties 4 Y ou may edit or delete the port mappings or click Add to manually add port mappings.
Chapter 14 Universal Plug-and-Play (UPnP) NBG-416N User’s Guide 133 Note: When the UPnP-enabled device is disconnected fro m your computer , all port mappings will be dele ted automatically . 5 Select Show icon in notification area when connected option and click OK .
Chapter 14 Universal Plug-and-Play (UPnP) NBG-416N User’s Guide 134 3 Select My Network Places under Other Places . Figure 89 Network Connections 4 An icon with the description f or each UPnP-enabled device displays under Local Network . 5 Right- click on the icon for your NBG-416N and select Invoke .
NBG-416N User’s Guide 135 C HAPTER 15 System 15.1 Overview This chapter provides information on the System screens. See the chapter about wizard setup for mo re information on t he next fe w screen s. 15.2 What Y ou Can Do •U s e t h e General screen t o enter a name to id entify the NBG-416N in the network and set the password ( Section 15.
Chapter 15 Syste m NBG-416N User’s Guide 136 The following table describes t he labels in this screen. T able 54 Maintenance > System > General LABEL DESCRIPTION Syst e m S et up Syst e m N am e System Name is a unique name to identify the NBG-416N in an Ethernet network.
Chapter 15 System NBG-416N User’s Guide 137 15.4 T ime Setting Screen T o change your NBG-416N’ s time and date, click Mainten ance > System > Time Setting . The screen appears as shown. Use this screen to configure the NBG- 416N’ s time based on your local time zone.
Chapter 15 Syste m NBG-416N User’s Guide 138 New Time (hh:mm:ss) This field displays the last updated time from the time server or the last time configured manually . When you set Time and Date Setup to Manual , enter the new time in this field and then click Apply .
Chapter 15 System NBG-416N User’s Guide 139 End Date Configure the day and time when Daylight Sa ving Time ends if you selected Daylight Savings . The o'clock field uses the 24 hour format. Here are a couple of examples: Daylight Saving Time ends in the Un ited States on the last Sunday of October .
Chapter 15 Syste m NBG-416N User’s Guide 140.
NBG-416N User’s Guide 141 C HAPTER 16 Logs 16.1 Overview This chapter contains information abou t configuring general log set tings and viewing the NBG-416N’ s logs. The W eb Configurator allows you t o look at all of the NBG-416N’ s logs in one location.
Chapter 16 Log s NBG-416N User’s Guide 142 Click Maintenance > Logs to open the View Log screen. Figure 93 Maintenance > Lo gs > View Log The following table describes t he labels in this screen. T able 56 Maintenance > Logs > V iew Log LABEL DESCRIPTION Ref r e s h Click Refresh to renew the log screen.
NBG-416N User’s Guide 143 C HAPTER 17 Tools 17.1 Overview This chapter shows you how t o upload a new firmware, upload or sa ve backup configur ation files and restart the NBG-416N. 17.2 What Y ou Can Do •U s e t h e Firmware screen to upload firmware to your NBG-416N ( Section 17.
Chapter 17 To ols NBG-416N User’s Guide 144 Click Maintenance > Too ls . Fol low the instructions in this screen to upload firmware to y our NBG-416N. Figure 94 Maintenance > T ools > Firmware The following table describes t he labels in this screen.
Chapter 17 Tools NBG-416N User’s Guide 145 The NBG-416N automatically restarts in thi s time causing a temporary net work disconnect. In some oper ating systems, y ou may see the following icon on your desktop. Figure 96 Network T emporarily Disconnected After two minutes, log in again and ch eck your new firmware version in the Status screen.
Chapter 17 To ols NBG-416N User’s Guide 146 17.4 Configuration Screen Click Maintenance > Too ls > Configuration . Informat ion rela ted to factory defaults, backup configuration, and restoring configur ation appears as shown next. Figure 98 Maintenance > T ools > Configuration 17.
Chapter 17 Tools NBG-416N User’s Guide 147 Note: Do not turn of f the NBG-416N while configuration file upload is in progress. After you see a “confi guration upload su ccessful” screen, you must then w ait one minute before logging into the NBG-416N again.
Chapter 17 To ols NBG-416N User’s Guide 148 Y ou can also press the RESET button on the rear pane l to reset the factory defaults of your NBG- 416N. Refer t o Section 2.3.1 on page 21 for more informat ion on th e RESET button. 17.5 Rest art Screen System rest art allows you to reboot th e NBG-416N without turn ing the power off .
NBG-416N User’s Guide 149 C HAPTER 18 Sys OP Mode 18.1 Overview The Sys OP Mod e (System Operation Mod e) function lets you con figure se lect the device operation mode: R outer, Access Point, Client Bridge or Universal Repeater . See Chapter 4 on page 37 for more information on which mode to choose.
Chapter 18 Sy s OP Mode NBG-416N User’s Guide 150 If you se lect Router mode, the following pop-up message window appears. Figure 104 Maintenance > Sys Op Mode > General: Rout er • In this mode there are both LAN and WAN ports. The LAN Ethernet and W AN Ethernet ports have di fferent IP addresses.
Chapter 18 Sys OP Mode NBG-416N User’s Guide 151 • The DHCP server on y our device is di sabled. In this mode there must be a device with a DHCP server on your netw ork such as a router which can allocate IP addresses or else you n eed to manually assign IP addresses to devices on your network.
Chapter 18 Sy s OP Mode NBG-416N User’s Guide 152.
NBG-416N User’s Guide 153 C HAPTER 19 Language 19.1 Language Screen Use this screen to change the language for t he W eb Configurator displa y . Click the language you prefer . The W eb Configurator language changes after a while without restarting the NBG-416N.
Chapter 19 Langu age NBG-416N User’s Guide 154.
NBG-416N User’s Guide 155 C HAPTER 20 Troubleshooting This chapter offers some suggesti ons to solve problems you mi ght encounter . The potential problems are divided into the following categories .
Chapter 20 Tro u blesh oo tin g NBG-416N User’s Guide 156 3 Inspect your cables for damage. Cont act the vendor to replace any damaged cables. 4 Disconnect and re-connect the power adaptor to the NBG-416N. 5 If the problem continues, contac t the vendor .
Chapter 20 Trou bleshooting NBG-416N User’s Guide 157 1 The default username is admin and default password is 1234 . 2 If this does not work, you have to reset the device to its fact ory defaults. See Section 20.4 on page 159 . I cannot see or access the Login screen in the W eb Configurator .
Chapter 20 Tro u blesh oo tin g NBG-416N User’s Guide 158 1 Make sure you have entered the password correctly . The default username is admin and default password is 1234 . This field is case-sensitiv e, so make sure [Caps Lock] is not on. 2 This can happen when y ou fail to log out properly from y our last session.
Chapter 20 Trou bleshooting NBG-416N User’s Guide 159 3 If the problem continues, contac t your ISP . The Internet conn ection is slow or intermittent. 1 There might be a lot of traffic on the network. Look at the LEDs, and check Section 1.3 on page 15 .
Chapter 20 Tro u blesh oo tin g NBG-416N User’s Guide 160 If the NBG-416N restarts automat ically , wait for the NBG-416N to finish restarting, and log in t o the W e b Configur ator . The username is admin and password is 1234 . If the NBG-416N does not restart automatically , di sconnect and reconnect the NBG-416N’ s power .
NBG-416N User’s Guide 161 A PPENDIX A IP Addresses and Subnetting This appendix introduces IP addresses a nd subnet masks. IP addresses identify individual devices on a network. Ev ery networking device (including computers, servers, routers, printers, etc.
Appendix A I P Addresses and Subnetting NBG-416N User’s Guide 162 Figure 108 Network Number and Host ID How much of the IP address is the netw ork number and how much is the host ID v aries according to the subnet mask.
Appendix A IP Addresses and Subnetting NBG-416N User’s Guide 163 Subnet masks are expressed in dotted decimal nota tion just like IP addresses. The following examples show the binary and decimal notation for 8-bit, 16-bit, 24-bit and 29-bit subnet masks.
Appendix A I P Addresses and Subnetting NBG-416N User’s Guide 164 Subnetting Y ou can use subnetting to divide one network into multiple sub-networks. In the following example a network administrator creates two sub-networks to isolate a group of servers from the rest of the company network for security reasons.
Appendix A IP Addresses and Subnetting NBG-416N User’s Guide 165 Figure 1 10 Subnetting Example: After Subnetting In a 25-bit subnet the host ID has 7 bits , so each sub-network has a maximum of 2 7 – 2 or 126 possible hosts (a host ID of all zeroes is the subnet’ s address itself , all ones is the subnet’ s broadcast address).
Appendix A I P Addresses and Subnetting NBG-416N User’s Guide 166 Example: Eight Subnet s Similarly , use a 27-bit mask to create eight subn ets (000, 001, 010, 011, 100, 101, 110 and 11 1). The following table shows IP address last octet values for each subnet.
Appendix A IP Addresses and Subnetting NBG-416N User’s Guide 167 Subnet Planning The following table is a summary fo r subnet planni ng on a network with a 24-bit network number . The following table is a summary fo r subnet planni ng on a network with a 16-bit network number .
Appendix A I P Addresses and Subnetting NBG-416N User’s Guide 168 Configuring IP Addresses Where you obtain your n etwork number depends on your particular situation. If the ISP or your network administrator assigns y ou a block of regist ered IP addresses, follow their instructions in selecting the IP addresses and the subnet mask.
Appendix A IP Addresses and Subnetting NBG-416N User’s Guide 169 computer B which is a DHCP client. Neither can access the Internet. This problem can be solved by assigning a different static IP address to computer A or setting computer A to ob ta in a n I P a dd r es s automatically .
Appendix A I P Addresses and Subnetting NBG-416N User’s Guide 170 Figure 1 13 Conflicting Computer and Router IP Addresses Ex ample.
NBG-416N User’s Guide 171 A PPENDIX B Setting Up Y our Computer ’ s IP Address Note: Y our specific NBG-416N may not support all of the oper ating systems described in this appendix. See the product specifications for more information about which operating syst ems are supported.
Appendix B Se tting Up Your Computer’s IP Address NBG-416N User’s Guide 172 2 In the Control Panel , click the Network Connections icon. 3 Right-click Local Area Connection and then select Properties . 4 On the General tab, select Internet Protocol (TCP/I P) and then click Properties .
Appendix B Setting Up You r Computer’s IP Address NBG-416N User’s Guide 173 5 The Internet Protocol TCP/IP Properties window opens..
Appendix B Se tting Up Your Computer’s IP Address NBG-416N User’s Guide 174 6 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically .
Appendix B Setting Up You r Computer’s IP Address NBG-416N User’s Guide 175 Windows V ist a This section shows screens from Windows Vista Professional. 1 Click Start > Control Panel . 2 In the Control Panel , click the Network and Internet icon.
Appendix B Se tting Up Your Computer’s IP Address NBG-416N User’s Guide 176 5 Right-click Local Area Connection and then select Properties . Note: During this procedure, cl ick Continue whenever Windows displa ys a screen saying that it needs your permission to continue.
Appendix B Setting Up You r Computer’s IP Address NBG-416N User’s Guide 177 7 The Internet Protocol Version 4 (TCP/IPv4) Properties window opens..
Appendix B Se tting Up Your Computer’s IP Address NBG-416N User’s Guide 178 8 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically .
Appendix B Setting Up You r Computer’s IP Address NBG-416N User’s Guide 179 Windows 7 This section shows screens from Windows 7 Enterprise. 1 Click Start > Control Panel . 2 In the Control Panel , click View network status and tasks under the Network and Intern et category .
Appendix B Se tting Up Your Computer’s IP Address NBG-416N User’s Guide 180 Note: During this procedure, cl ick Continue whenever Windows displa ys a screen saying that it needs your permission to continue. 5 Select Internet Protocol Version 4 (TCP/IPv 4) and then select Properties .
Appendix B Setting Up You r Computer’s IP Address NBG-416N User’s Guide 181 6 The Internet Protocol Version 4 (TCP/IPv4) Properties window opens..
Appendix B Se tting Up Your Computer’s IP Address NBG-416N User’s Guide 182 7 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically .
Appendix B Setting Up You r Computer’s IP Address NBG-416N User’s Guide 183 Mac OS X: 10.3 and 10.4 The screens in this section are from Ma c OS X 10.4 but can also apply to 10.3. 1 Click Apple > System Preferen ces . 2 In the System Preferen ces window , click the Network icon.
Appendix B Se tting Up Your Computer’s IP Address NBG-416N User’s Guide 184 3 When the Network preferences pane opens, select Built-in Et hernet from the network connection type list, and then click Config ure. 4 For dynamically assigned settings, select Using DHCP from the Configur e IPv4 list in the TCP/IP tab.
Appendix B Setting Up You r Computer’s IP Address NBG-416N User’s Guide 185 5 For statically assigned settings, do the following: •F r o m t h e Configure IPv 4 list, select Manually . •I n t h e IP Address field, type y our IP address. •I n t h e Subnet Mask field, type your subnet m ask.
Appendix B Se tting Up Your Computer’s IP Address NBG-416N User’s Guide 186 Figure 1 14 Mac OS X 10.4: Network Utility Mac OS X: 10.5 and 10.6 The screens in this section are from Ma c OS X 10.5 but can also apply to 10.6. 1 Click Apple > System Preferen ces .
Appendix B Setting Up You r Computer’s IP Address NBG-416N User’s Guide 187 3 When the Network preferences pane opens, select Ethernet from the list of av ailable connection types. 4 From the Configure list, select Using DHCP for dynamically assigned settings.
Appendix B Se tting Up Your Computer’s IP Address NBG-416N User’s Guide 188 •I n t h e IP Address field, enter your IP address. •I n t h e Subnet Mask field, enter your subnet mask. •I n t h e Router field, enter the IP address of your NBG-416N.
Appendix B Setting Up You r Computer’s IP Address NBG-416N User’s Guide 189 Figure 1 15 Mac OS X 10.5: Network Utility Linux: Ubuntu 8 (GNOME) This section shows you how to configure y our comp uter’s T C P/IP settings in the GNU Object Model Environment (GNOME) using the Ubuntu 8 Linux di stribution.
Appendix B Se tting Up Your Computer’s IP Address NBG-416N User’s Guide 190 3 In the Authenticate window, enter y our admin account name and password then click the Authenticate button. 4 In the Network Settings window, select the connection that you want to configure, then click Properties .
Appendix B Setting Up You r Computer’s IP Address NBG-416N User’s Guide 191 5 The Properties dialog box opens. •I n t h e Config uration list, select Automatic Configuration (DHCP) if you ha ve a dynamic IP address. •I n t h e Configuration list, select Static IP address if you have a static IP address.
Appendix B Se tting Up Your Computer’s IP Address NBG-416N User’s Guide 192 8 Click the Close button to apply the changes. V erifying Settings Check your TCP/IP properties by clicking System > Ad ministrati on > Network Tools , and then selecting the appropriate Network device from the Devices tab.
Appendix B Setting Up You r Computer’s IP Address NBG-416N User’s Guide 193 Figure 1 16 Ubuntu 8: Network T ools Linux: openSUSE 10.3 (KDE) This section shows you how to configure y our computer ’ s TCP/IP settings in the K Desktop Environment (KDE) using the open SUSE 10.
Appendix B Se tting Up Your Computer’s IP Address NBG-416N User’s Guide 194 2 When the Run as Root - KDE su dialog opens, enter the admin password and click OK . 3 When the YaST Control Center window opens, select Network Devices and then click the Network Card icon.
Appendix B Setting Up You r Computer’s IP Address NBG-416N User’s Guide 195 4 When the Network Settings window opens, click the Overview tab, select the appropriate connection Name from the list, and then click the Configure button.
Appendix B Se tting Up Your Computer’s IP Address NBG-416N User’s Guide 196 Figure 1 17 openSUSE 10.3: Network Card Setup 6 Select Dynamic Address (DHCP) if you have a dyn amic IP address. Select Statically assigned IP Address if you have a static IP address.
Appendix B Setting Up You r Computer’s IP Address NBG-416N User’s Guide 197 9 Click Finish to save your settings and close the window . V erifying Settings Click the KNetwork Manager icon on the Task bar to check your TCP/IP properties. From the Options sub-menu, select Show Conne c tion Informatio n .
Appendix B Se tting Up Your Computer’s IP Address NBG-416N User’s Guide 198 Figure 1 19 openSUSE: Connection Status - KNetwork M anager.
NBG-416N User’s Guide 199 A PPENDIX C Pop-up Windows, JavaScript s and Java Permissions In order to use the web configur ator you need to allow: • W eb browser pop-up windows from your device. • Jav aScripts (enabled by default). • Jav a permissions (enabled by default).
Appendix C Pop-up Windows, JavaScripts and Ja va Permissions NBG-416N User’s Guide 200 Figure 121 Internet Options: Privacy 3 Click Apply to save this setting. Enable Pop-up Blockers with Exceptions Alternatively , if you only w ant to allow pop-up windows from y our device, see the following steps.
Appendix C Pop-up Windows, JavaScripts an d Java Permissions NBG-416N User’s Guide 201 Figure 122 Internet Options: Privacy 3 T ype the IP address of your device (the web page that you do not want to hav e blocked) with the prefix “http://” . For example, http://192.
Appendix C Pop-up Windows, JavaScripts and Ja va Permissions NBG-416N User’s Guide 202 5 Click Close to return to the Privacy screen. 6 Click Apply to save this setting. JavaScript s If pages of the web configurator do not display prop erly in Internet Explorer , check that JavaScripts are allowed.
Appendix C Pop-up Windows, JavaScripts an d Java Permissions NBG-416N User’s Guide 203 Figure 125 Security Settings - Jav a Scripting Java Permissions 1 From Internet Explorer , click Tools , Internet Opti ons and then the Security tab. 2 Click the Custom Level.
Appendix C Pop-up Windows, JavaScripts and Ja va Permissions NBG-416N User’s Guide 204 Figure 126 Security Settings - Jav a JA V A (Sun) 1 From Internet Explorer , click Tools , Internet Opti ons and then the Advanc ed tab . 2 Make sure that Use Java 2 for <applet> under Java (Sun) is selected.
Appendix C Pop-up Windows, JavaScripts an d Java Permissions NBG-416N User’s Guide 205 Mozilla Firefox Mozilla Firefox 2.0 screens are used here. Screens for other v ersions may vary slightly . The steps below apply to Mozilla Firefox 3.0 as well. Y ou can enable Jav a, Javascripts an d pop-ups in one screen.
Appendix C Pop-up Windows, JavaScripts and Ja va Permissions NBG-416N User’s Guide 206 Opera Opera 10 screens are used here. Screens for o ther versions may v ary slightly . Allowing Pop-Ups From Opera, click Tools , then Preferences . In the General tab, go to Choo se how you prefer to handle pop-ups and select Open all pop-ups .
Appendix C Pop-up Windows, JavaScripts an d Java Permissions NBG-416N User’s Guide 207 Figure 131 Opera: Enabling Java T o customize JavaScript behavior in th e Opera browser , click JavaScript Options . Figure 132 Opera: Jav aScript Options Select the items you want Opera’ s JavaScript to apply .
Appendix C Pop-up Windows, JavaScripts and Ja va Permissions NBG-416N User’s Guide 208.
NBG-416N User’s Guide 209 A PPENDIX D Wireless LANs Wireless LAN T opologies This section discusses ad-hoc and infrastructure wireless LAN topologies. Ad-hoc Wireless LAN Configuration The simplest WLAN configuration is an indepe ndent (Ad-hoc) WLAN that connects a set of computers with wireless adapters (A, B, C).
Appendix D Wireless LANs NBG-416N User’s Guide 210 Figure 134 Basic Service Set ESS An Extended Service Set (ESS) consists of a series of overlapping BSSs, each containing an access point, with each access point connected together by a wired network.
Appendix D Wireless LANs NBG-416N User’s Guide 21 1 Figure 135 Infrastructure WLAN Channel A channel is the radio frequency(ies) used by wireless devices to tr ansmit and receive data.
Appendix D Wireless LANs NBG-416N User’s Guide 212 Figure 136 RT S/CTS When station A sends data to the AP , it might not know that the station B is already using the channel.
Appendix D Wireless LANs NBG-416N User’s Guide 213 Preamble T ype Preamble is used to signal that data is coming to the receiver . Short and long refer to the length of the synchronization field in a packet. Short preamble increases performance as less time sending preamble means more time for sending data.
Appendix D Wireless LANs NBG-416N User’s Guide 214 The following figure shows the relative effectivenes s of these wireless security methods available on your NBG-416N. Note: Y ou must enable the same wireless secu rity sett ings on the NBG-416N and on all wireless clients that you w ant to associate with it.
Appendix D Wireless LANs NBG-416N User’s Guide 215 RADIUS is a simple package exchange in wh ich your AP acts as a me ssage relay between the wireless client and the network RADIUS server .
Appendix D Wireless LANs NBG-416N User’s Guide 216 EAP-MD5 (Message-Dig est Algorithm 5) MD5 authentication is the simplest one-w ay authentication method.
Appendix D Wireless LANs NBG-416N User’s Guide 217 If this feature is enabled, it is not necessary to configure a default encryption k ey in the wireless security configuration screen. Y ou may still configure and store keys, but they will not be used while dynamic WEP is enabled.
Appendix D Wireless LANs NBG-416N User’s Guide 218 called Rijndael. They both include a per -packet key mixing function, a Message Integrity Check (MIC) named Michael, an extended initialization vector (IV) with se quencing rules, and a re-keying mechanism.
Appendix D Wireless LANs NBG-416N User’s Guide 219 WP A(2) with RADIUS Application Example T o set up WPA(2), you need the IP address of the RADIUS server , its port number (default is 1812), and the RADIUS shared secret. A WPA(2) applicat ion exa mple with an external RADIUS server looks as follows.
Appendix D Wireless LANs NBG-416N User’s Guide 220 4 The AP and wireless clie nts use the TKIP or AE S encryption process, the PMK and information exchanged in a handshake to create tempor al encryp tion keys. They use these keys to encrypt data exchanged between them.
Appendix D Wireless LANs NBG-416N User’s Guide 221 Po sitioning the antennas properly increases the range an d coverage area of a wireless LAN. Antenna Characteristics Frequency An antenna in the frequency of 2.
Appendix D Wireless LANs NBG-416N User’s Guide 222 F or directional antennas, point the antenna in the direction of th e desired cover age area..
NBG-416N User’s Guide 223 A PPENDIX E Common Services The following table lists some commonly-used services and their associated protocols and port numbers. For a comprehensive list of port number s, ICMP t ype/code numbers and services, visit the IANA (I nterne t Assigned Number Authority) web site.
Appendix E C ommon Services NBG-416N User’s Guide 224 HT TPS TC P 443 HTTPS is a secured http session often u sed in e- commerce. ICMP User-Defined 1 Internet Control Message Pr otocol is often used for diagnostic or routing purposes. ICQ UDP 4000 This is a popular In ternet chat program.
Appendix E Common Services NBG-416N User’s Guide 225 SQL -NET TCP 1521 Structured Que ry Language is an interface to access data on many diffe rent types of database systems, includin g mainframes, midrange systems, UNIX systems and n etwork servers.
Appendix E C ommon Services NBG-416N User’s Guide 226.
NBG-416N User’s Guide 227 A PPENDIX F Legal Information Copyright Copyright © 2012 by Z yXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a w.
Appendix F Lega l Information NBG-416N User’s Guide 228 This device has been tested and found to comply with the limits for a Class B digital device pursuant to P art 15 of the FCC Rules. Thes e limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix F Legal Information NBG-416N User’s Guide 229 implied warr anty of merchantability or fitness for a particular use or purpose. ZyXEL shall in no event be held liable fo r indirect or consequential damages of an y kind to the purchaser . T o obtain the services of this warranty , co ntact your vendor .
Appendix F Lega l Information NBG-416N User’s Guide 230 National Restrictions This product may be used in all EU countries (and other countries following the EU directive 1999/5/EC) without any limi.
Appendix F Legal Information NBG-416N User’s Guide 231 The Belgian Institute for Postal Services and T elecommunications (BIPT) must be notified of any outdoor wireless link h aving a range ex ceeding 300 meters. Please check http:// www . bipt.be for more details.
Appendix F Lega l Information NBG-416N User’s Guide 232 Notes: 1. Although Norw ay , Switzerland and Liecht enstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in those countries. 2. The regulatory limits for maximum output po wer are specified in EIRP .
Appendix F Legal Information NBG-416N User’s Guide 233 • Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a new one. • Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning.
Appendix F Lega l Information NBG-416N User’s Guide 234.
Index NBG-416N User’s Guide 235 Index A Address Assignment 92 Advanced Encryption Standard See AES. AES 217 Alert 141 alternative subnet mask notation 163 antenna directional 221 gain 221 omni-direc.
Index NBG-416N User’s Guide 236 DynDNS see also DDNS 11 9 E EAP Authentication 215 encryption 74 , 217 and local (user) database 74 key 74 WPA compatible 74 ESS 210 ESSID 160 Extended Service S et, .
Index NBG-416N User’s Guide 237 MAC filter 81 managing the device good habits 14 MBSSID 13 Media access control 81 Memory usage 42 , 49 , 54 , 58 Message Integrity Check (MIC) 217 mode 13 N NA T 111.
Index NBG-416N User’s Guide 238 S safety warnings 232 Scheduling 87 Service Set 77 Service Set IDentification 77 , 89 , 90 Service Set IDentity . See SSID.
Index NBG-416N User’s Guide 239 WPA 217 key caching 218 pre-authentication 218 user authentication 218 vs WPA -PSK 218 wireless client supplicant 218 with RADIUS application example 219 WPA compatib.
Index NBG-416N User’s Guide 240.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté ZyXEL Communications NBG-416N c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du ZyXEL Communications NBG-416N - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation ZyXEL Communications NBG-416N, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le ZyXEL Communications NBG-416N va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le ZyXEL Communications NBG-416N, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du ZyXEL Communications NBG-416N.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le ZyXEL Communications NBG-416N. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei ZyXEL Communications NBG-416N ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
