Manuel d'utilisation / d'entretien du produit ZU 7120 F du fabricant Zanussi
Aller à la page of 20
2222739-84 INSTRUCTION BOOKLET FREEZER ZU 7120 F.
2 Instructions for the User Important Safety Instructions 3 Description of the Appliance 4 Operation 4 Before use 4 Freezer controls 4 Starting your appliance 5 T emperature control 5 W arning light (.
3 IMPORT ANT SAFETY INSTRUCTIONS These warnings are provided in the interests of your safety . Ensure that you understand them all before installing or using this appliance. Y our safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department.
➄➅ ➆ DESCRIPTION OF THE APPLIANCE 4 ➀ Freezer calendar (recommended storage times for frozen foods) ➁ Air outlet duct ➂ Freezer controls ➃ Air inlet filter ➄ Comparments for storing frozen food ➅ Compartment for freezing fresh food ➀ ➁ ➂ ➃ ➄ ➄ ➅ ➅ OPERA TION Before use Remove all securing tapes.
Starting your appliance Insert the plug into the wall socket. The appliance can be activated/deactivated by pressing the ON/OFF button ➅ .The pilot light ➄ will light up to show that the appliance is on.
Thawing Frozen food, prior to being used, can be thawed in the fridge or at room temperature depending on the time available. Small food items may even be cooked from frozen; in this case cooking will take longer . Any frozen food which is allowed to thaw accidentally should either be eaten as soon as possible or thrown away .
The freezer compartment will become progressively covered with frost. This should be removed with the special plastic scraper provided, whenever the thick- ness of the frost exceeds 1/4". During this operation it is not necessary to switch off the power supply or to remove the foodstuffs.
Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELEC- TRICITY supply . Internal cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly .
9 SOMETHING NOT WORKING? If after the above checks, there is still a fault, call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.
10 SER VICE AND SP ARE P ARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 08705 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area.
11.
12.
13 Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part there- of is proved to be defective by reason only of faulty.
DIMENSIONS Height 81,5 cm Width 56 cm Depth 53,8 cm POWER SUPPL Y VOL T AGE AND FREQUENCY 220-240 V / 50 Hz TOT AL POWER ABSORBED 120 W A VERAGE DAIL Y UNITS ELECTRICITY (*) 0,90 kWh GROSS CAP ACITY 95 l NET CAP ACITY 86 l ST AR RA TING (*)This figure is based on standard test results in accordance with European Standard EN153.
15 ELECTRICAL CONNECTION W ARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suit- able for your socket outlet, it must be cut off and the appropriate plug fitted.
BUILDING-IN INSTRUCTIONS Before carrying out any work, remove the plug from the power socket. Grid preparation Remove the grid from the appliance pulling it towards you with hands. Right door opening: Remove the left side (A) of the grid cutting it from the rear (see figure, a).
Building the appliance in unter a worktop The dimensions of the recessed installation area must correspond with those indicated in the figure. The appliance could be inserted between two units (a) or as an end unit (b).
18 The appliance is equipped with adjustable support feet. T o adapt the appliance to the height of the instal- lation area (max 870 mm), screw in, or screw out the feet situated to the four bottom corners. Separate parts A, B, C, D as shown in the figure.
19 S.I.007 S.I.008 580 a = 100 b = 150 25 ÷ 80 A = 820 B = 870 25 PR168 PR167/1 D B Should the lining up of the furniture door be neces- sary , use the clearance of slots. At the end of operations, it is necessary to check if the door of the furniture closes properly .
© Electrolux Household Appliances Limited 2000.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Zanussi ZU 7120 F c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Zanussi ZU 7120 F - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Zanussi ZU 7120 F, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Zanussi ZU 7120 F va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Zanussi ZU 7120 F, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Zanussi ZU 7120 F.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Zanussi ZU 7120 F. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Zanussi ZU 7120 F ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
