Manuel d'utilisation / d'entretien du produit RX-V340 du fabricant Yamaha
Aller à la page of 60
RX-V340 Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U.S .A. Y AMAHA CANADA MUSIC L TD. 135 MILNER A VE., SCARBOROUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUROP A G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F .
1 T o assure the finest perf ormance, please read this manual carefully . K eep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry , clean place — away fr om direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
1 English INTRODUCTION PREP ARA TION B ASIC OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION CONTENTS INTRODUCTION CONTENTS ............................................................ 1 FEA TURES ..............................................
2 Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. FEA TURES Multi-mode digital sound field processing ◆ Dolby Pro Logic/Dolby Pro Logic II decoder ◆ Dolby Digital/Dolby Digital + Matrix 6.
3 English INTRODUCTION Installing batteries in the remote control Insert the batteries in the correct direction by aligning the + and – marks on the batteries with the polarity markings (+ and –) inside the battery compartment. 1 Press the part marked with a and slide off the battery compar tment co ver .
4 CONTROLS AND FUNCTIONS Front panel 1 ST ANDBY/ON T urns the unit on, or sets it in standby mode. When you turn the unit on, you will hear a click and there will be a 4 to 5-second delay before it can reproduce sound. Standby mode In this mode, the unit uses a small amount of po wer in order to receiv e infrared-signals from the remote control.
5 English INTRODUCTION w STEREO (EFFECT) Switches between normal stereo and DSP effect reproduction. When you select STEREO, the unit mixes down all Dolby Digital and DTS signals (e xcept the LFE channel) as well as those 2-channel signals without effects, to the main left and right speak ers.
6 SYSTEM POWER ST ANDBY POWER AV POWER TV POWER TV ENTER +10 0 9 STEREO /DTS 8 7 6 5 MOVIE2 MOVIE1 TV THTR MUSIC 4 3 2 1 ENTERT AINMENT ROCK JAZZ HALL V-AUX VCR D-TV/CBL DVD SLEEP TUNER MD/CD-R CD TV .
7 English INTRODUCTION Appro ximately 6 m (20 feet) ■ Using the remote control The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation. ■ Handling the remote control • Do not spill water or other liquids on the remote control.
8 V-AUX VCR D-TV/CBL DVD MD/CD-R TUNER CD MA TRIX DIGIT AL PL PL PCM SILENT DSP HiFi NIGHT VIRTUAL AUTO STEREO SLEEP VOLUME MUTE MEMORY TUNED L C R RL LFE RC RR ~~~~~~~~~~~~~~ dB ft CT RT PTY PS HOLD PTY EON 13 45 8 7 6 2 90 q w y er u i o p a t 1 Processor indicator s The indicators for the various decoder s light up when the decoders are in use.
9 English PREP ARA TION CONNECTIONS Before connecting components CA UTION Do not connect this unit or other components to the mains po wer until all connections between the components hav e been completed. • Be sure all connections are made correctly , that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”.
10 AUDIO L R 2 1 AUDIO VIDEO TUNER L R CD DVD AM ANT GND FM ANT IN (PLAY) MAIN DVD CD DIGITAL INPUT SUB WOOFER CENTER SUB WOOFER MONITOR OUT SURROUND OPTICAL COAXIAL OUT (REC) MD /CD-R D-TV /CBL V-AUX IN VCR OUT 6CH INPUT OUTPUT 75 Ω UNBAL.
11 English PREP ARA TION Connecting audio components ■ Connecting a CD play er Connect the coaxial digital output jack on your CD player to the DIGIT AL INPUT CD jack on this unit. y • Use the A UDIO jacks on this unit to connect to a CD player that does not hav e a CO AXIAL DIGIT AL OUTPUT jack, or to record from CD players.
12 ■ Connecting the AM loop antenna 1 Set up the AM loop antenna, then connect it to the terminals on this unit. 2 Press and hold the tab to insert the AM loop antenna lead wires into the AM ANT and GND terminals. 3 Orient the AM loop antenna for the best reception.
13 English PREP ARA TION Connecting an external decoder This unit is equipped with 6 additional input jacks (MAIN left and right, CENTER, SURR OUND left and right and SUBWOOFER) for discrete multi-channel input from a component equipped with a multi-channel decoder and 6 channel output jacks such as a D VD/SACD player .
14 Connecting the speakers ■ Speakers This unit has been designed to provide the best sound- field quality with a 5-speak er system, using main left and right speakers, rear left and right speakers and a center speaker .
15 English PREP ARA TION 10 mm (3/8 ” ) Red: positive (+) Black: negative ( – ) Banana plug CONNECTIONS 12 ■ Connections Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) in accordance with the markers on this unit, the speakers, and the speaker cables.
16 Subwoofer system Main B speaker Center speaker Right Rear speaker SUBWOOFER jac k When using a subwoofer with b uilt-in amplifier , including the Y AMAHA Activ e Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack.
17 English PREP ARA TION Connecting the power supply cords ■ Connecting the A C power cord Plug in this unit to a wall outlet. ■ V OL T A GE SELECTOR (General model only) The VOL T A GE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the A C main supply .
18 Using the basic menu Use the remote control to make adjustments. • Press SPEAKERS A/B on the front panel to select the main speakers you want to use, and set SPEAKERS ON/OFF to the ON position. • Make sure you disconnect headphones from this unit.
English 19 PREP ARA TION SET MENU B ASIC SOUND INPUT OPTION 1 SETUP Press j / i to alter the settings for each parameter . Use d to mov e to the next setting. 2 SP LEVEL Press j / i to adjust the balance between each speaker and the left main speaker .
20 Setting the unit to match your speaker system Follo w the instructions below to set the amplifier output to match the size of your room and speakers. Press u / d to cycle through parameters 1 through 4, and j / i to alter the parameter setting. Factory default settings are highlighted.
English 21 B ASIC OPERA TION PLA YBACK 1 Press ST ANDBY/ON (SYSTEM PO WER on the remote control) to turn on the po wer . 2 T urn on the video monitor connected to this unit. 3 Press and set SPEAKERS ON/OFF inward (ON). 4 Press and set SPEAKERS A/B inward (A) or outwar d (B) to select the main speakers y ou want to use .
22 ■ BGV (backgr ound video) function The BGV function allows you to vie w images from a video source together with sounds from an audio source. For example , you can enjoy listening to classical music while watching beautiful scenery from a video source on the video monitor .
English 23 B ASIC OPERA TION Input modes and indications This unit is equipped with 2 types of input jacks for the CD and D VD sources only . Y ou can select the type of input signals you wish to use. Each time you turn on the unit po wer , the input mode is set to the “INPUT 2 INPUT MODE” setting defined in the set menu.
24 Selecting a sound field program Y ou can enhance your listening experience by selecting a DSP program. For details about each program, see pages 27 – 30. 1 Press AMP . 2 Press one of the numeric b uttons on the remote control to select the desired program.
English 25 B ASIC OPERA TION The display cycles as follo ws each time you press q / DTS: PR O LOGIC → PRO LOGIC Enhanced → PR O LOGIC II Movie → PR O LOGIC II Music → PR O LOGIC → .
26 Notes • If you turn off the sound ef fects, no sound is output from the center speaker or rear speakers. • If you turn off the sound ef fects while the unit is reproducing sound from a Dolby Di.
English B ASIC OPERA TION 27 DIGIT AL SOUND FIELD PROCESSING (DSP) Understanding sound fields A sound field is def ined as the “characteristic sound reflections of a particular space. ” In concert halls and other music venues, w e hear early reflections and rev erberations as well as the direct sound produced by the artist(s).
28 CINEMA-DSP Sound design of CINEMA-DSP Filmmakers intend for the dialog to be located right on the screen, the ef fect sound a little farther back, the music spread ev en farther back, and the surround sound around the listener . Of course, all of these sounds must be synchronized with the images on the screen.
English B ASIC OPERA TION 29 ■ For movie pr ograms No. 7 8 9 Features This program creates the extremely wide sound f ield of a 70-mm movie theater . It precisely reproduces the source sound in detail, making both the video and the sound field incredibly real.
30 Sound field effects The 6-channel soundtracks found on 70-mm f ilm produce precise sound field localization and rich, deep sound without using matrix processing. This unit’ s MOVIE THEA TER programs provide the same quality of sound and sound localization that 6-channel soundtracks do.
English B ASIC OPERA TION 31 TUNING 4 Press PRESET/TUNING l / h once to begin automatic tuning. Press h to tune in to a higher frequency , or press l to tune in to a lower frequenc y . When the unit is tuned in to a station, the “TUNED” indicator lights up and the frequency of the station receiv ed is shown on the front panel display .
32 Presetting stations ■ A utomatically presetting stations (for FM stations) Y ou can use the automatic preset tuning feature to store FM stations. This function enables the unit to automatically tune in to FM stations with strong signals, and to store up to 40 (8 stations x 5 groups) of those stations in order .
English B ASIC OPERA TION 33 4 Press PRESET/TUNING l / h to select a preset station number (1 to 8) while the “ MEMOR Y ” indicator is flashing. Press h to select a higher preset station number .
34 ■ Exchanging preset stations Y ou can exchange the assignment of tw o preset stations. The example belo w describes the procedure for exchanging preset station “E1” with “ A5”. 1 Select preset station “ E1 ” by using the A/B/C/D/E and PRESET/TUNING l / h .
English B ASIC OPERA TION 35 Use this feature to automatically set this unit in standby mode after the amount of time you hav e set. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer can only be set with the remote control.
36 Recording adjustments and other operations are performed on other recording components. Refer to the operation instructions for these components for details on their operation . 1 T urn on the power of this unit and all connected components. 2 Select the source component y ou want to record fr om.
37 English AD V ANCED OPERA TION Adjusting the items on the set menu Use the remote control to make adjustments. y • Y ou can change set menu parameters while the unit is reproducing sound. • Y ou can use NEXT and SET MENU +/– on the front panel to change these settings, if the unit is not set to TUNER mode.
38 6 Press j / i once to enter the setup mode of the selected item. The last setting you adjusted appears on the front panel display . Depending on the menu item, press u / d to select a sub item. 7 Press j / i repeatedly to change the menu item setting.
39 English AD V ANCED OPERA TION ■ 1B MAIN (main speaker mode) Choices: LARGE , SMALL LARGE Select this if you hav e large main speakers. The unit directs the entire range of the main left and right channel signals to the main left and right speakers.
40 SOUND 2 SP DIST ANCE (speaker distance) Use this feature to adjust the delay applied to center channel sounds. This feature works when there is sound output from the center speakers with a source such as Dolby Digital or DTS.
41 English AD V ANCED OPERA TION SOUND 5 CENTER GEQ (center graphic equalizer) Use this feature to adjust the built-in 5-band graphic equalizer so that the center speaker tonal quality matches that of the left and right main speakers. Y ou can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.
42 OPTION 1 DISPLA Y SET ■ DIMMER Use this to adjust the brightness of the front panel display . Control range: –4 to 0 OPTION 2 MEM. GUARD (memor y guard) Use this feature to pre vent accidental changes to settings on the unit.
43 English AD V ANCED OPERA TION REMOTE CONTROL FEA TURES In addition to controlling this unit, the remote control can operate other A/V components made by Y AMAHA and other manufacturers. T o control other components, you must set up the remote control with the manuf acturer codes.
44 Setting the manufacturer code Y ou can control other components with the remote control by setting the appropriate manufacturer code. The follo wing table shows f actory-set component controls (Library: component category) and the manuf acturer code for each.
45 English AD V ANCED OPERA TION Controlling other components Y ou can operate other components if you hav e set the manufacturer code for your component in the remote control. Note, ho wev er, that some b uttons may not operate the component correctly .
46 Using the test tone Use the test tone to set speaker le vels so that the volume from each speaker is identical when heard from your listening position. 1 Press AMP . 2 Press TEST . The unit will output a test tone. 3 Press u / d repeatedly to select a speaker to adjust.
47 English ADDITIONAL INFORMA TION SOUND FIELD PROGRAM PARAMETER EDITING Changing parameter settings The initial sound field program settings will pro vide you with an excellent listening e xperience as they are. It is not necessary to alter these settings, but you can create an original listening en vironment by doing so.
48 Digital sound field parameter descriptions Y ou can adjust the v alues of certain digital sound field parameters so the sound f ields are recreated accurately in your listening room.
49 English ADDITIONAL INFORMA TION TROUBLESHOOTING Refer to the chart below when this unit does not function pr operly . If the problem you are experiencing is not listed below or if the instruction belo w does not help, set this unit to standby mode, disconnect the power cord, and contact the nearest authorized Y AMAHA dealer or service center .
50 Prob lem No sound / weak sound from particular speakers. No sound from the effect speakers. No sound from the center speaker . No sound from the rear speakers. No sound from the subwoofer . P oor bass reproduction. Cause Incorrect cable connections.
51 English ADDITIONAL INFORMA TION Prob lem A “ humming ” sound can be heard. The volume le vel cannot be increased, or the sound is distorted. The sound effect cannot be recorded. The sound field parameters and some other settings on the unit cannot be changed.
52 ■ T uner FM stereo reception is noisy . There is distortion, and clear reception cannot be obtained even with a good FM antenna. The desired station cannot be tuned in with the automatic tuning method. Previously preset stations can no longer be tuned in.
53 English ADDITIONAL INFORMA TION GLOSSAR Y ■ Dolby Surr ound Dolby Surround uses a 4 channel analog recording system to reproduce realistic and dynamic sound effects: 2 main left and right channels (stereo), a center channel for dialog (monaural), and a rear channel for special sound effects (monaural).
54 ■ PCM (Linear PCM) Linear PCM is a signal format under which an analog audio signal is digitized, recorded and transmitted without using any compression. This is used as a method of recording CDs and D VD audio. The PCM system uses a technique for sampling the size of the analog signal per very small unit of time.
55 English ADDITIONAL INFORMA TION SPECIFICA TIONS FM SECTION • T uning Range [U.S.A. and Canada models] ............................ 87.5 to 107.9 MHz [Other models] .............................................. 87.50 to 108.00 MHz • 50 dB Quieting Sensiti vity (IHF , 100% mod.
LIST OF MANUF A CTURER’S CODES LIST A DE CÓDIGOS DE F ABRICANTES 製造廠家編碼表 TV Yamaha 299 292 Admiral 292 293 Aiwa 294 276 283 284 Akai 295 296 Alba 296 AOC 297 Bell&Howell 292 Besta.
1 T o assure the finest perf ormance, please read this manual carefully . K eep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry , clean place — away fr om direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
RX-V340 Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U.S .A. Y AMAHA CANADA MUSIC L TD. 135 MILNER A VE., SCARBOROUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUROP A G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Yamaha RX-V340 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Yamaha RX-V340 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Yamaha RX-V340, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Yamaha RX-V340 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Yamaha RX-V340, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Yamaha RX-V340.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Yamaha RX-V340. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Yamaha RX-V340 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
