Manuel d'utilisation / d'entretien du produit DSP-AX620 du fabricant Yamaha
Aller à la page of 73
Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U.S.A. Y AMAHA CANADA MUSIC L TD. 135 MILNER A VE., SCARBOROUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUROP A G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F .
II II 1 T o assure the finest performance, please read this manual carefully . Keep it in a safe place for future reference. 2 Install this unit in a well ventilated, cool, dry , c lean place with at .
1 English INTRODUCTION PREP ARA TION B ASIC OPERATION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX INTRODUCTION CONTENTS INTRODUCTION FEA TURES ............................................................ 2 GETTING ST ARTED .................
2 FEA TURES Other Features ◆ 96-kHz/24-bit D/A Converter ◆ “ SET MENU ” which Provides Y ou with 10 Items for Optimizing This Unit for Y our Audio/V ideo System ◆ T est T one Generator for E.
3 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX Installing Batteries in the Remote Control Insert the batteries in the correct direction by aligning the + and – marks on the batteries with the polarity markings (+ and – ) inside the battery compartment.
4 CONTROLS AND FUNCTIONS Front Panel 1 ST ANDBY/ON T urns on or sets this unit in the standby mode. When you turn on this unit, you will hear a click and there will be a 4 to 5-second delay before this unit can reproduce sound.
5 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX CONTROLS AND FUNCTIONS 8 B ASS Adjusts the low-frequency response for the left and right main speakers. Turn the control to the right to increase or to the left to decrease the low-frequency response.
6 CONTROLS AND FUNCTIONS A/B/C/D/E TV INPUT TV VOLUME TV POWER EFFECT e r 1 2 3 4 5 6 7 9 8 q w 0 t y u i o This section describes the basic operation of this unit with the remote control. First, set the selector dial to the AMP/ TUN position. See “ REMOTE CONTROL FEA TURES ” for full details.
7 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX CONTROLS AND FUNCTIONS A B i V OLUME +/ – Increases or decreases the volume level. o MUTE Mutes the sound. Press again to restore the audio output to the previous volume level.
8 CONTROLS AND FUNCTIONS Using the Remote Control The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation. ■ Handling the remote control • Do not spill water or other liquids on the remote control.
9 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX CONTROLS AND FUNCTIONS Front Panel Display 1 t indicator Lights up when the built-in DTS decoder is on. 2 VIRTU AL indicator Lights up when using V irtual CINEMA DSP .
10 CONTROLS AND FUNCTIONS (Europe model) Rear Panel 1 DIGIT AL OUTPUT jac ks 2 DIGIT AL INPUT jacks 3 GND terminal See page 12 for connection information. 4 6CH INPUT jac ks See page 18 for connection information. 5 Video component jac ks See pages 14 and 15 for connection information.
11 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SPEAKER SETUP Speakers to Be Used This unit has been designed to provide the best sound- field quality with a 5-speaker system, using left and right main speakers, left and right rear speakers, and a center speaker .
12 CONNECTIONS Before Connecting Components CA UTION Never connect this unit and other components to mains power until all connections between components have been completed. • Be sure all connections are made correctly , that is to say L (left) to L, R (right) to R, “ + ” to “ + ” and “–” to “–” .
13 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX CONNECTIONS DVD MONITOR OUT D-TV/CBL YP B /C B P R /C R COMPONENT VIDEO S VIDEO VIDEO MO.
14 CONNECTIONS YP B /C B P R /C R Connecting Video Components ■ About the video jac ks There are three types of video jacks. V ideo signals input through the VIDEO jacks are the conventional composit video signals. V ideo signals input through the S VIDEO jacks are separated into luminance (Y) and color (C) video signals.
15 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX CONNECTIONS DVD MONITOR OUT D-TV/CBL YP B /C B P R /C R COMPONENT VIDEO S VIDEO VIDEO MO.
16 CONNECTIONS Connecting the Speakers Be sure to connect the left channel (L), right channel (R), “ + ” (red) and “–” (black) properly . If the connections are faulty , no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.
17 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX CONNECTIONS SWITCHED 100W MAX. TOT AL AC OUTLETS IMPEDANCE SELECTOR SET BEFORE POWER ON MAIN A OR B: 4 MIN. /SPEAKER A + B: 8 MIN. /SPEAKER CENTER : 6 MIN.
18 CONNECTIONS Connecting an External Amplifier (Europe and U.K. models only) If you want to increase the power output to the speakers, or want to use another amplifier , connect an external amplifier to the OUTPUT jacks as follows.
19 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX CONNECTIONS IMPEDANCE SELECTOR SET BEFORE POWER ON MAIN A OR B: 4 MIN. /SPEAKER A + B: 8 MIN. /SPEAKER CENTER : 6 MIN. /SPEAKER REAR : 6 MIN.
20 ON-SCREEN DISPLA Y (OSD) Full display Short display Y ou can display the operation information for this unit on a video monitor . If you display the SET MENU and DSP program parameter settings on a monitor , it is much easier to see the available options and parameters than it is by reading this information on the front panel display .
21 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SPEAKER MODE SETTINGS This unit is equipped with a main amplifier capable of handling 5.
22 ADJUSTING THE SPEAKER OUTPUT LEVELS This section explains how to adjust the speaker output levels by using the test tone generator . When this adjustment is made, the output level heard at the listening position will be the same from each speaker .
23 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX CONNECTIONS ADJUSTING THE SPEAKER OUTPUT LEVELS The state of the test tone output is also shown on the monitor by an image of the audio listening room.
24 BASIC PLA YBACK 3 Press INPUT l / h repeatedly (or press one of the input selector buttons) to select the input source. • The current input source is indicated on the front panel display with a cursor . • The current input source name and input mode appear on the front panel display and on the video monitor for a few seconds.
25 English INTRODUCTION PREP ARA TION B ASIC OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX BASIC PLA YBA CK 6CH INPUT – + VOLUME CD TUNER PHONO MD/CD-R DVD D-TV/CBL VCR 1 VCR2/DV.
26 BASIC PLA YBA CK INPUT MODE ■ BGV (backgr ound video) function The BGV function allows you to combine a video image from a video source with a sound from an audio source. (For example, you can listen to classical music while you are watching a video.
27 English INTRODUCTION PREP ARA TION B ASIC OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX BASIC PLA YBA CK ■ Notes on playing a sour ce encoded with a DTS signal • If the digi.
28 BASIC PLA YBA CK Selecting a Sound Field Program Y ou can enhance your listening experience by selecting a DSP program. For details about each program, see “ SOUND FIELD PROGRAM ” . ■ On the remote control 1 Press DSP . The indicator lights up for about 3 seconds.
29 English INTRODUCTION PREP ARA TION B ASIC OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX BASIC PLA YBA CK EFFECT ■ Virtual CINEMA DSP and SILENT CINEMA Virtual CINEMA DSP V irtual CINEMA DSP allows you to enjoy the sound field effects of the DSP program without rear speakers.
30 BASIC RECORDING Recording adjustments and other operations are performed from the recording components. Refer to the operation instructions for these components. 1 T urn on the power to the unit and all connected component. 2 Select the source component you want to record from.
31 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX Adjusting the Items on the SET MENU Adjustment should be made with the remote control. Notes • Some items require extra steps to change to the desired setting.
32 SET MENU 1 SPEAKER SET (speaker mode settings) Use this feature to select suitable output modes for your speaker configuration. Notes • When 96-kHz sampling digital signals are input to this unit, level adjustments in items 1B and 1D are possible, but those in items 1A,1C and 1E are not affected.
33 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SET MENU ■ 1C REAR L/R SP (rear speaker mode) The OSD shows large, small or no rear speakers depending on how you set this item.
34 SET MENU ■ 1D LFE/B ASS OUT (bass out mode) LFE signals carry low-frequency effects when this unit decodes a Dolby Digital or DTS signal. Low-frequency signals are defined as 90 Hz and below . Choices: SWFR (subwoofer), MAIN, BOTH Initial setting: BOTH SWFR Select this if you use a subwoofer .
35 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SET MENU 3 HP TONE CTRL (headphone tone control) Use this feature to adjust the level of the bass and treble when you use your headphones.
36 SET MENU 6 DOLBY D. SET (Dolby Digital set) This setting is effective only when this unit decodes Dolby Digital signals. ■ LFE LEVEL Use this feature to adjust the output level of the LFE (low-frequency ef fect) channel when playing back a Dolby Digital signal.
37 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SET MENU L C C R RL RR 8 SP DELA Y TIME Use this feature to adjust the delay of the center channel sound. This feature works when this unit decodes a Dolby Digital or DTS signal.
38 A/B/C/D/E A/B/C/D/E 2 1 3 ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS Y ou can adjust the output level of each ef fect speaker (center , left and right rear and subwoofer) while listening to a music source. Adjustment should be made with the remote control.
39 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX A/B/C/D/E A/B/C/D/E 2 3 SLEEP TIMER Use this feature to automatically set this unit in the standby mode after the amount of time you have set.
40 REMOTE CONTROL FEA TURES It is possible to control this unit and other Y AMAHA A/V components using the remote control supplied with this unit. It is also possible to control components from other manufacturers (or some Y AMAHA components) by setting the proper manufacturer code (a signal assigned to each manufacturer and component).
41 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX REMOTE CONTR OL FEA TURES 2 1 3 5 4 @ # ! A/B/C/D/E A/B/C/D/E 2 5 4 1 3 6 Commonly Used Bu.
42 REMOTE CONTR OL FEA TURES A/B/C/D/E A/B/C/D/E Button Names and Functions in Each Position ■ T APE/MD position (tape deck, MD recorder or CD recor der) Select the T APE/MD position. r Rec/Pause (tape/MD) e Pause (MD/CD-R) p Play b DIR A (tape) This button selects the playing direction of deck A.
43 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX REMOTE CONTR OL FEA TURES A/B/C/D/E A/B/C/D/E ■ D VD/LD position Select the DVD/LD position.
44 REMOTE CONTR OL FEA TURES A/B/C/D/E A/B/C/D/E ■ VCR position Select the VCR position. VCR REC Press this button twice to start recording. p Play w Rewind Numeric buttons Ch enter/Recall _/_ _ CH .
45 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX REMOTE CONTR OL FEA TURES Setting the Manufacturer Code Y ou can set up the code for the manufacturer of your component in each position of the selector dial.
46 REMOTE CONTR OL FEA TURES Returning to the Factor y Setting ■ T o return to the factory-set codes in all positions 1 Press j / i at the same time for about 4 seconds. The indicator flashes twice. 2 Enter the code number “ 9990 ” . Make sure that the indicator flashes twice.
47 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SOUND FIELD PROGRAM A digital sound field processor (DSP) based on the latest Y AMAHA technology is built into this unit. It is possible to play back various sound fields for the source you are listening to.
48 SOUND FIELD PROGRAM 8 MO VIE THEA TER 2 Analog, PCM, Dolby Digital in 2-channel DGTL AD VENTURE DTS AD VENTURE This program is ideal for precisely reproducing the sound design of the newest 70-mm and multichannel soundtrack films.
49 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SOUND FIELD PROGRAM Presence DSP sound field Surround DSP sound field ■ MO VIE THEA TE.
50 SOUND FIELD PROGRAM PARAMETER EDITING What is a sound field? What really creates the rich, full tones of a live instrument are the multiple reflections from the walls of the room.
51 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SOUND FIELD PROGRAM PARAMETER EDITING SOUND FIELD PROGRAM PARAMETER EDITING Changing Par.
52 SOUND FIELD PROGRAM PARAMETER EDITING Sound Field Parameter Descriptions Y ou can adjust the values of certain sound field parameters so the sound fields are recreated accurately in your listening room. Note • Not all of the following parameters can be found in every program.
53 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SOUND FIELD PROGRAM PARAMETER EDITING SOUND FIELD PROGRAM PARAMETER EDITING ■ LIVENESS Function: This parameter adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the early reflections decay .
54 SOUND FIELD PROGRAM PARAMETER EDITING ■ S.ROOM SIZE (surr ound room size) Function: This parameter adjusts the apparent size of the surround sound field. Control range: 0.1 – 2.0 ■ S.LIVENESS (surround liveness) Function: This parameter adjusts the apparent reflectivity of the virtual walls in the surround sound field.
55 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX TROUBLESHOOTING Refer to the chart below when the unit does not function properly .
56 TROUBLESHOO TING Problem Cause Remedy Refer to page No sound from the effect speakers. The sound effect is off. Press EFFECT to turn it on. A Dolby Surround, Dolby Digital or DTS decoding DSP program is being used with material not encoded with Dolby Surround, Dolby Digital or DTS.
57 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX TROUBLESHOO TING Prob lem Cause Remedy Refer to page The v olume level cannot be increased, or the sound is distorted. The component connected to the REC OUT jacks of this unit is turned off.
58 TROUBLESHOO TING ■ Remote contr ol Problem Cause Remedy Refer to page The remote control does not work nor function properl y . Wrong distance or angle. The remote control will function within a maximum range of 6 m (20 feet) and no more than 30 degrees off-axis from the front panel.
59 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SPECIFICA TIONS A UDIO SECTION • Minimum RMS Output Power for Main, Center, Rear 20 Hz to 20 kHz, 0.06% THD, 8 ohms .......................
60 GLOSSAR Y ■ Dolb y Surr ound Dolby Surround uses a four analog channel recording system to reproduce realistic and dynamic sound effects: two left and right main channels (stereo), a center channel for dialog (monaural), and a rear channel for special sound effects (monaural).
61 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX GLOSSAR Y ■ S VIDEO signal W ith S VIDEO signal system, the video signal normally transmitted using a pin cable is separated and transmitted as the Y signal for the luminance and the C signal for the chrominance through the S VIDEO cable.
62 INDEX A Accesories ................................................................................... 3 AC outlets .................................................................................. 19 B Balance (L/R BALANCE) (SET MENU) ...........
LIST OF MANUF A CTURER’S CODES LISTES DES CODES F ABRICANT VERZEICHNIS DER HERSTELLERCODES LIST A ÖVER TILL VERKARKODER ELENCO DEI CODICI DEL F ABBRICANTE LIST A DE CÓDIGOS DE F ABRICANTES LIJST V.
KTV 0601, 1 171 LENOIR 0601, 151 1 LEYEO 1 181 LIFETEC 2591, 2601, 261 1, 2621, 2641, 2651, 2661, 2671, 2681, 2691, 271 1, 2761, 2771, 2781 LOEWE OPT A 0121, 0131, 0581, 061 1, 1081 LOGIC 1691, 2281 L.
THORN-FERGUSON 0281, 0371, 0551, 0651, 0781, 0861, 0881, 1 131, 1 181, 1361, 1461, 1971, 1991, 2281 TMK 0141, 0791, 1471 TOSHIBA 0141, 0381, 0481, 1221, 1271, 1701, 1741, 1851, 2151, 2801, 281 1 TRANS.
GRANADA (UK) 0052, 0092, 0462, 0602, 0812, 0822 GRUNDIG 0052, 0062, 0092, 0232, 0252, 0262, 0752, 0802 HANSEA TIC 0052, 0812 HARMAN/KARDON 0122, 0922 HCM 0002 HINARI 0002, 0202, 0412, 0442, 0522 HIT A.
LUXOR 0185, 1895, 1905 MAGNA VOX 1865, 1875 MARANTZ 0165, 0175, 0545, 0665, 1275, 1335, 1405, 1505, 1875, 1955 MA TSUSHIT A 1095, 1605 MCS 0535 MEDION 0075, 1995, 2005, 2015 MEMOREX 0525, 1015, 1265, .
Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF . 90620, U.S.A. Y AMAHA CANADA MUSIC L TD. 135 MILNER AVE., SCARBOROUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUROP A G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F .
SPEAKERS MAIN + — R L A — + B CENTER + — REAR (SURROUND) R L + —— + DVD MONITOR OUT D-TV/CBL YP B /C B P R /C R COMPONENT VIDEO S VIDEO VIDEO MONITOR OUT DVD DVD DVD D-TV/CBL D-TV/CBL D-TV/C.
A/B/C/D/E A/B/C/D/E A/B/C/D/E u / d Numeric buttons (MD/CD-R) Quick Reference Card TAPE/MD (CD-R) AMP/TUN DSP/TUN INPUT p Play r Rec/Pause (tape/MD) DSP b DIR A (tape) Skip – (MD/CD-R) w Rewind (tap.
A/B/C/D/E A/B/C/D/E A/B/C/D/E A/B/C/D/E A/B/C/D/E Quick Reference Card Press this button twice to start recording. Appuyer deux fois sur cette touche pour commencer l’enregistrement. Drücken Sie diese Taste zweimal, um die Aufnahme zu starten. Tryck två gånger på den här knappen för att börja spela in.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Yamaha DSP-AX620 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Yamaha DSP-AX620 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Yamaha DSP-AX620, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Yamaha DSP-AX620 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Yamaha DSP-AX620, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Yamaha DSP-AX620.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Yamaha DSP-AX620. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Yamaha DSP-AX620 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
