Manuel d'utilisation / d'entretien du produit 701P46985 du fabricant Xerox
Aller à la page of 34
Version 6.0.xx, May 2007 701P46985 Getting ready for the Xerox ® FreeFlow ® Print Server Installation.
.
Prepared by: Xerox Corporation Global Knowledge and Language Services 800 Philips Road Bldg. 845-17S Webster, New York 14580 USA ©2007 by Xerox Corporation.
Product Recycling and Disposal If you are managing the disposal of y our Xerox product, pl ease note that the product contains lead, mercury, and ot her materials w hose disposal may be regulated due to environmental c onsiderations in certain countries or states.
Table of contents Table of conten ts .............................................................................................................. ...................................... 1 Installation w orksh eets ....................................
.
XEROX FREEFLOW PRINT SERVER 1 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Installation worksheets The Getting Ready for the Xerox® FreeFlow® Print Server 6.
FREEFLOW PRINT SERVER 6.0.xx 2 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Available worksheets The following is a list of the worksheets that support the installation of the FreeFlow Print Server software: • Worksheet W-1: Solaris Operating System software Complete this worksheet fo r each print server.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 3 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION • Worksheet W-8: AppleTalk Gateway installation This information is used by t he Xerox service representative to set up the AppleTalk Gateway.
FREEFLOW PRINT SERVER 6.0.xx 4 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION About the worksheets The worksheets contain a combination of the following elements: • The Data Element column contains a list of the specific items of information needed to perform the procedure identified in the worksheet titl e.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 5 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-1: Solaris operating system worksheet The Xerox service representative uses the following information during the installation of the Solaris operating system on the print server.
FREEFLOW PRINT SERVER 6.0.xx 6 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Domain Name LDAP Profile Name Profile Server IP Address 10 Geographic Region 11 Time Zone 1.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 7 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-1 data element definitions Primary Network Interface: Product Controller/Server Value iGe.
FREEFLOW PRINT SERVER 6.0.xx 8 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION your customer’ s com pany. The customer network administrator assigns IP address numbers within this set to each host and workstation on the network.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 9 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Asia, Eastern Asia, Australia /New Zealand, Canada, Europe, Central America, South America, United States, Other (offset from GMT), and Other (specify rules file).
FREEFLOW PRINT SERVER 6.0.xx 10 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-2: Xerox Security worksheet Security is automatically installed and set to the default secure mode of Low. Security can be modified from High (fully secure) to None (not secure) through the FreeFlow Print Server interface.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 11 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Profile Characteristics Value Legacy Compatibility Comments None • Default operating system only For customers that have a physically closed environment Close to DocuSP 2.
FREEFLOW PRINT SERVER 6.0.xx 12 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-3: Xerox FreeFlow Print Server softw are worksheet The Xerox service representative uses the following information during the installation of the FreeFlow Print Server software.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 13 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-3 data element definitions NOTE: A new user will be created on the print server to accept print jobs from command line clients at either a UNIX or PC workstation, or both.
FREEFLOW PRINT SERVER 6.0.xx 14 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-4: System configuration worksheet The Xerox service representative uses the following information during the set up and configuration of the dC105 diagnostics screen.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 15 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-4 data element definitions Server Serial Number: The serial number for the print server platform. Printer Serial Number: The serial number for the printer.
FREEFLOW PRINT SERVER 6.0.xx 16 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION IP Address of Default Router: The default router lP address is a unique 4 byte, 32-bit numeric value that identifies the machine that is acting as the main router .
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 17 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-5: Print Server software and gatew ays worksheet Indicate which gateways and ot her software features have been selected by the customer to be licensed on the print server.
FREEFLOW PRINT SERVER 6.0.xx 18 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-6: Network configuration w orksheet Fill out the appropriate worksheet for the network configuration the customer is using.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 19 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION DNS (Domain Name System) DNS provides the ability to map hostnames to IP addresses, as well as a mechanism for storing and retrieving information on the network.
FREEFLOW PRINT SERVER 6.0.xx 20 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Active Directory Services (ADS) Active Directory Services is a Windows-based name service typically used with Windows NT or 2000.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 21 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Ethernet MAC Address Automatically filled in W-7: Novell NetWare gateway installation worksheet Fill out this worksheet only if the customer has purchased the Novell Connectivity — QServer gateway.
FREEFLOW PRINT SERVER 6.0.xx 22 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-7 data element definitions This section defines the dat a elements determined by the net.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 23 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Version 3.25 June 17, 1993 Hardware setting: I/O Port 320h to 33Fh, Interrupt 2h Node address: 00009B99E9B9 Frame type: ETHERNET II Boardname: DOCUTECH LAN protocol: ARP LAN protocol: IP address 13.
FREEFLOW PRINT SERVER 6.0.xx 24 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-8: AppleTalk Gateway installation worksheet If the customer has purchased the AppleTalk Connectivity — Apple PAP gateway, fill out this worksheet.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 25 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION If the EtherTalk 2.0 icon appears, double-click the icon and see if an Internet router is found.
FREEFLOW PRINT SERVER 6.0.xx 26 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-9: SNMP Gateway installation worksheet If the customer is planning on using the SNMP Gateway, fill out this worksheet. When SNMP is installed and licensed, items such as the Printer ID are automatically configured.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 27 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-10: Client workstations The client submission software is now available in the following: ♦ CentreWare drivers designed and packaged for each supported printer.
FREEFLOW PRINT SERVER 6.0.xx 28 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-12: Data Overwrite and Backup Configuration If the customer has agreed to enable and use data overwrite and/or backup services, the following information is necessary to configure the FreeFlow Print Server.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Xerox 701P46985 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Xerox 701P46985 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Xerox 701P46985, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Xerox 701P46985 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Xerox 701P46985, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Xerox 701P46985.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Xerox 701P46985. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Xerox 701P46985 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
