Manuel d'utilisation / d'entretien du produit FES340V du fabricant Whirlpool
Aller à la page of 16
Electric Range Use and Care Guide ROPER Appliances FES340V FES370V FES375V Thank you for choosing a Roper appliance. This Use and Care Guide will help you operate and maintain your new, quality- built Roper range. Keep this Use and Care Guide in a safe place for future reference.
Important Safety Instructions To reduce the risk of fire, electrical shock, injury to persons, or damage when using the range, follow basic precautions, including the following: 1. Read all instructions before using the range. 2. Install or locate the range only in accordance with the provided Installation Instructions.
28. DO NOT soak removable heating elements in water. The element will be damaged and shock or fire could result. 29. DO NOT clean door heat seal. It is essential for a good seal. Care should be taken not to rub, damage, or move the seal. Clean only parts recommended in this Use and Care Guide.
Using Your Range Using the surface units Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF. Surface unit markers The solid dot in the surface unit marker shows which surface unit is turned on by that knob.
The electronic oven controls There are three parts in the oven control section: - The digital display. - The command buttons. - The Time/Temp Set Knob and Set/ Cancel button. Instructions for each oven control are covered on the following pages. Read them carefully.
Using the oven Baking !I ii ii 1, Position the racks properly before turning on the oven. To change rack position, pull rack out to stop, raise front edge and lift out.
The oven vent To delay start and stop automatically: 1. Position the oven racks properly and place the food in the oven. 2. Make sure the clock is set to the right time-of-day. (See “Setting the clock” on page 5.) 3. Push the Cook Time button. “0:OO” will show in the large display and the HR indicator will come on.
The storage drawer The storage drawer is for storing pots and pans. The drawer can be removed to make it easier to clean under the range, and to check for installation of the anti- tip brackets. Use care when handling the drawer. Removing the storage drawer: Levi& 1.
Caring For Your Range Solid element surface units (Model FES375V) Burn And Electrical Shock Hazard Make sure all controls are OFF and 1 or electrical shock. 1 the range is cool before cleaning ’ Failure to do so can result in burns The control knobs 1.
The lift-up cooktop (all models except FES375V) 1. Lift front of cooktop at both front corners until the support rods lock into place. Personal Injury And Product Damage Hazard . Be sure both support rods are fully extended and in the locked position.
Setting the controls Special tips 1. Make sure the Clock is set to the right time of day. (See “Setting the clock” on page 5.) 2. Move the Lock Lever all the way to the right - the Clean position. 3. Push the Clean button. A 3-hour Self-Cleaning cycle will be set automatically.
Cleaning chart Burn And Electrical Shock Hazard Make sure all controls are OFF and the range is cool before cleaning. Failure to do so can result in burns or electrical shock. PART Exterior surfaces WHAT TO USE HOW TO CLEAN Warm soapy water and a soft a Wipe off regularly when range is cool.
PART Oven door glass (Models FES370V 81 FES375V) Self-Cleaning oven WHAT TO USE HOW TO CLEAN Spray glass cleaner or warm, 1 Make sure oven is cool. soapy water and a non- . Follow directions provided with the cleaner. abrasive plastic scouring pad. . Wash, rinse and dry well.
The oven light The oven light will come on when you push the Oven Light Switch on the control panel. Push the switch again to turn off the light, Electrical Shock and Personal Injury Hazard . Make sure oven and light bulb are cool and power to the oven has been turned off before replacing the light bulb.
Before You Call For Service If you are having an operating problem, check the chart to see what the cause might be before you call for assistance. OPERATING PROBLEM Nothing operates. CHECK IF WHAT TO DO . Range is properly connected to a live 1 Reconnect range to electrical supply.
LIMITED WARRANTY ROPER Appliances LENGTH OF WARRANTY (From date of purchase) PRODUCTS COVERED WHAT WE WILL PAY FOR FULL ONE YEAR WARRANTY All Roper Appliances Replacement parts and repair labor to correct defects in materials or workmanship.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Whirlpool FES340V c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Whirlpool FES340V - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Whirlpool FES340V, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Whirlpool FES340V va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Whirlpool FES340V, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Whirlpool FES340V.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Whirlpool FES340V. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Whirlpool FES340V ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
