Manuel d'utilisation / d'entretien du produit 558017 du fabricant Wagner SprayTech
Aller à la page of 36
® Edition 3 / 2010 0558 939A ProSpray 3.34 GB Operating manual ProSpray 3.34 Airless high-pressure spraying unit Model: 0558017 0558030 0558389 Original operating manual.
2 ProSpray 3.34 GB Warning! Never put your fingers, hands or any other part s of the body into the spray jet! Never point the spray gun at yourself, other persons or animals. Never use the spray gun without safety guard. Do not treat a spraying injury as a harmless cut.
ProSpray 3.34 3 GB Contents Contents Page 1. Safety regulations for Airless spraying ....................... 4 1.1 Earthing instructions......................................................... 5 2. General view of application ........................
4 ProSpray 3.34 GB Safety Regulations 1. Safety regulations for Airless spraying This manual contains information that must be read and understood before using the equipment. When you come to an area that has one of the following symbols, pay particular attention and make certain to heed the safeguard.
ProSpray 3.34 5 GB Safety regulations General view of application HAZARD: EXPLOSION HAZARD DUE TO INCOMPATIBLE MATERIALS Will cause severe injury or property damage. PREVENTION : • Donotusematerialscontainingbleachorchlorine.
6 ProSpray 3.34 GB General view of application Description of unit 2. General view of application 2.1 Application 2.2 Coating materials Processible coating materials i Pay attention to the Airless quality of the coating materials to be processed.
ProSpray 3.34 7 GB Description of unit 7 8 2 1 3 5 6 4 9 10 13 12 11 14 3.3 Legend for explanatory diagram ProSpray 3.34 1 Spray gun 2 High-pressure hose 3 Oil cup for EasyGlide (EasyGlide prevents in.
8 ProSpray 3.34 GB Description of unit Starting operation 3.5 Technical data Voltage: 220~240VoltAC,50/60Hz Max. current consumption: 8.5A@230VAC Power cord: 3 x 1.5 mm 2 – 6 m Acceptance capacity: 1955 Watt Max. operating pressure: 221 bar (22.
ProSpray 3.34 9 GB Starting operation 4 4.2 Control Panel Indicators The following is a description of the control panel indicators. Pressure Indicator Service Indicator Pressure Indicator The pressure indicator shows the current operating pressure of the sprayer.
10 ProSpray 3.34 GB Starting operation 4.5 Cleaning preserving agent when starting- up of operation initially 1. Immerse the suction tube (Fig. 7, Item 1) and return hose (2) into a container with a suitable cleaning agent. 2. Turn the pressure control knob counterclockwise (3) to minimum pressure.
ProSpray 3.34 11 GB Starting operation Volume Pumped Screen VOLUME PUMPED SELECT-4 MENU-1 TheVolumePumpedscreenshowsthe total number of gallons or liters sprayed by the sprayer. GALLONS X MENU-1 LITRES X MENU-1 LITRES-2 GALLONS-2 ToselecttheVolumePumpedscreen, press the #4 key.
12 ProSpray 3.34 GB Spraying technique Handling the high-pressure hose 5. Spraying technique Injection hazard. Do not spray without the tip guard in place. NEVER trigger the gun unless the tip is completely turned to either the spray or the unclog position.
ProSpray 3.34 13 GB Cleaning the unit (shutting down) 8. Cleaning the unit (shutting down) A clean state is the best method of ensuring operation without problems.Afteryouhavenishedspraying,cleantheunit.Under no circumstances may any remaining coating material dry and harden in the unit.
14 ProSpray 3.34 GB Cleaning the unit (shutting down) Remedy in case of faults Type of malfunction A. Unitdoesnotstart B. Unitdoesnotdrawinmaterial C. Unitdrawsinmaterial,butthe pressure does not build up Possible cause 1.
ProSpray 3.34 15 GB Remedy in case of faults Type of malfunction D. Coating material exits at the top oftheuidsection E. Increased pulsation at the spray gun F. Poor spray pattern G. Unitlosespower Possible cause 1. Upperpackingisworn.
16 ProSpray 3.34 GB Servicing Repairs at the unit 10. Servicing 10.1 General servicing Servicing of the unit should be carried out once annually by the WAGNERservice. 1. Check high-pressure hoses, device connecting line and plug for damage. 2. Checktheinletvalve,outletvalveandlterforwear.
ProSpray 3.34 17 GB Repairs at the unit 14. Unscrewlowerhousing(Fig.13,Item10)withadjusting wrench while holding the upper housing (11) securely with a second adjusting wrench. 15. Remove bearing ring (13) and O-ring (12).
18 ProSpray 3.34 GB Repairs at the unit 12. Insert upper packing (Fig. 15) with O-ring (1) and protruding lip (2) downward into the upper housing (6). 1 2 13. Place intermediate ring (Fig. 14, Item 10) on the upper packing (8). 14. Screw threaded joint (Fig.
ProSpray 3.34 19 GB Appendix 12. Appendix 12.1 Selection of tip To achieve faultless and rational working, the selection of the tip is of the greatest importance. In many cases the correct tip can only be determined by means of a spraying test. Some rules for this: The spray jet must be even.
20 ProSpray 3.34 GB Appendix Application Tip Spray Bore Spraying marking angle inch / mm width mm 1) Order no. Natural paints 407 40° 0.007/0.18 160 0552407 Clear paints 507 50° 0.007/0.18 190 ––––––– Oils 209 20° 0.
ProSpray 3.34 21 GB Appendix 12.5 TempSpray The paint material is heated to the required temperature uniformly by an electric heating element, which is located inside the hose (regulatedfrom20°Cto60°C).
22 ProSpray 3.34 GB Appendix 12.6 Pump-Runner (Order No. 2306987) Universalaccessoriesforcleaning,cleantransportationandpreservationofthepumpunit.
ProSpray 3.34 23 Deutschlan d J . W agner GmbH • Otto-Lilienthal-Straße 18 • 88677 Markdor f T el. 0043/07544/5050 • Fax: 0043/07544/505/200 • info@wagner-group.co m T el. 0043/2235/44 158 • Fax: 0043/2235/44 163 • office@wagner-group.a t Österreic h J .
24 ProSpray 3.34 Accessories illustration ProSpray 3.34 3 1 5 7 2 4 6 8.
ProSpray 3.34 25 Item Part No. Description 1 0296 388 Spray gun AG 08, F-thread 0296 386 Spray gun AG 08, G-thread 0502 166 Spray gun AG 14, F-thread 0502 119 Spray gun AG 14, G-thread 2 0296 441 Pole.
26 ProSpray 3.34 Spare parts list ProSpray 3.34 1 3 4 5 6 9 8 34 35 2 36 7 2 48 49 10 11 12 13 16 15 14 17 18 19 20 21 22 23 24 26 27 28 30 31 32 33 29 25 37 38 39 41 40 44 42 43 45 46 47 Main Assembl.
ProSpray 3.34 27 Item Part No. Description 1 0290 270 Motor shroud 2 0508 559 Screw (2) 3 0290 269 Belly pan 4 9802 266 Screw (2) 5 0290 228 Door 6 0509 218 Screw (2) 7 0290 253 Grommit 8 0290 251 Tra.
28 ProSpray 3.34 Spare parts list ProSpray 3.34 1 4 5 6 2 3 12 13 14 15 16 17 18 7 8 9 10 19 20 21 22 11 9 10 23 24 Fluid section.
ProSpray 3.34 29 Item Part No. Description 1 0290 266 Retainer 2 0290 265 Spacer 3 ------- Upperpacking 4 0290 256 Upperhousing 5 0290 267 Fitting 6 9871 189 O-ring 7 ------- Lower packing 8 050.
30 ProSpray 3.34 Spare parts list ProSpray 3.34 15 16 17 18 4 5 6 7 8 9 11 12 13 14 10 1 2 3 Drive Assembly Item Part No. Description 1 0290 241 Slider assembly 2 0507 767 Screw (4) 3 0290 272 Slider .
ProSpray 3.34 31 ProSpray 3.34 Filter assembly Spare parts list 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Item Part No. Description 1 0508 723 Filter housing 2 14058 Conical spring 3 0507 748 Filter, 60 mesh (.
32 ProSpray 3.34 Spare parts list ProSpray 3.34 1 13 11 12 11 14 10 9 2 3 4 5 6 7 8 Upright cart assembly.
ProSpray 3.34 33 Item Part No. Description 1 0290 207 Handle assembly (includes items 7-8) 2 9805 352 Screw (2) 3 0290 257 Bushing 4 0290 235 Cart weldment 5 9894 275 Spring 6 0290 285 Carriage assemb.
GB 34 ProSpray 3.34 Important notes on product liability AsaresultofanECregulationbeingeffectiveasfromJanuary1,1990,themanufacturershallonlybeliableforhisproductifallpartscomefromhimor are released by him, and if the devices are properly mounted and operated.
ProSpray 3.34 35 Note on disposal: In observance of the European Directive 2002/96/ EC on waste electrical and electronic equipment and implementation in accordance with national law, this product is .
36 ProSpray 3.34 Declaration of conformity Herewith we declare that the supplied version of WAGNER ProSpray 3.34 Complies with the following provisons applying to it: 2004/108, 92/31 EWG, 93/68 EWG, 2006/42. Appliedharmonizedstandards,inparticular: EN 292-1/-2, EN 1953, EN 55014, EN 60335-1, EN 61000-3.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Wagner SprayTech 558017 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Wagner SprayTech 558017 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Wagner SprayTech 558017, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Wagner SprayTech 558017 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Wagner SprayTech 558017, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Wagner SprayTech 558017.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Wagner SprayTech 558017. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Wagner SprayTech 558017 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
