Manuel d'utilisation / d'entretien du produit D795WT du fabricant Vivitek
Aller à la page of 63
D7 Series U s e r M a n u a l 用戶手冊 用户手 册 M a n u a l d e l u s u a r i o M a n u e l d e l ' u t i l i s a t e u r B e n u t z e r h a n d b u c h 사 용 자 설 명 서 Р у к.
Copyright This publication, including all photographs, illustratio ns and software, is protected under international copy- right laws, with all rights reserved. Neither this man ual, nor any of the material contained herein, may be reproduced without written consent of the autho r.
DLP Projector – User’s Manual — ii — Important Safety Information Important: It is strongly recommended that you read this sect ion carefully be fore using the projector. These safety and usage instructions will ensure that you enj oy many years of safe use of the pr ojector.
Preface Projector Installation Notice ¾ Place the projector in a horizontal p osition The tilt angle of the projector should not excee d 15 degrees, nor should the p rojector be installed in any way other than the desktop and ceiling mou nt, ot herwise lamp life could decrease dramatically.
DLP Projector – User’s Manual Power Safety ¾ Only use the supplied power cord. ¾ Do not place anything on the powe r cord. Place the power cord where it will not be in the way of foot traffic. ¾ Remove the batteries from the remote control whe n storing or not in use for a prolonged period.
Preface – v – Main Features • Lightweight unit, easy to p ack away and transport. • Compatible with all m ajor video stan dards including NTSC, P AL, and SECAM. • A high brightness rating allows for presentations in daylight or in lit rooms.
DLP Projector – User’s Manual — vi — Table of Contents GETTING STARTED .......................................................................................................................................................... 1 P ACKING C HECKLIST .
Preface – vii – LED E RROR M ESSAGES ..................................................................................................................................................... 46 I MAGE P ROBLEMS ........................................
DLP Projector – User’s Manual – 1 – G ETTING S TARTED Packing Checklist Carefully unpack the projector and che ck that the following items are included: DLP P RO JECTOR R EMOTE CONTROL (WITH T.
DLP Projector – User’s Manual Views of Projector Parts Front-right View 1 2 3 4 5 6 I TEM L ABEL D ESCRIPTIO N S EE PAGE : 1. Lamp cover Removes cover to re place lamp or color wheel 2. Kensington lo ck Secure to permanent obj ect wi th a Kensington® Lock system 44 3.
DLP Projector – User’s Manual Rear view 1 2 3 4 5 6 7 8 9 12 1 1 1 0 I TEM L ABEL D ESCRIPTIO N S EE PAGE : Connect the RGB CABLE to a disp lay (Loop Thru only for VGA IN-1 ) 1. VGA OUT 2. RS-232 Connect RS-232 serial po rt cable for remote con trol Connect the RGB CABLE from a computer and component s 3.
DLP Projector – User’s Manual Bottom view 70.00 1 10.00 126.00 228.00 20.00 56.00 146.00 236.00 100.0 240.0 1 2 3 3 3 2 I TEM L ABEL D ESCRIPTION S EE PAGE : 44 1. Security bar Helps protect t he projector f rom unaut horized use 2. Tilt adjustors Rotate adjusters lever to adjust angle position 3.
DLP Projector – User’s Manual Remote Control Par ts Important: 1. Avoid using the projector with bright fluoresc ent lighting turned on. Certain high-frequency fluo- rescent lights can disrupt remote control operation. 2. Be sure nothing obstructs the path between the re mote control and the proj ector.
DLP Projector – User’s Manual – 6 – I TEM L ABEL D ESCRIPTIO N S EE PAGE : 1. IR transmitter Transmit s signals t o projector 2. Status LED Lights when th e remote control i s used 3. Laser Press to operate the on-screen pointer 4. Up Up arrow whe n connect ed through USB to a PC 5.
DLP Projector – User’s Manual – 7 – Remote Control Operating Range The remote control uses infrared transmission to cont rol the projector. It is not necessary to point the remote directly at the projector.
DLP Projector – User’s Manual S ETUP AND O PERATION Inserting the Remote Control Batteries – 8 – 1. Remove the battery compartment cover by sliding the cover in the direction of the arrow. 2. Insert the battery with the positive side facing up.
DLP Projector – User’s Manual – 9 – Connecting Input Devices A PC or note book computer and video devices can be connected to the projector at the same time. Video devices include DVD , VCD, and VHS players, as we ll as m ovie camc orders and di gital sti ll cam eras.
DLP Projector – User’s Manual – 10 – I TEM L ABEL D ESCRIPTIO N K AUDIO IN Connect an au dio cable fr om the input device L AUDIO OUT Connect an a udio cable from the outp ut device ！ Warning: As a safety precaution, disconnect all power to the projector and connecti ng devices before making connections.
DLP Projector – User’s Manual – 11 – Starting and Shutting down t he Projec tor 1. Connect the power cord to the projector. Connect the other end to a wall outlet. The POWER LED on the projector light. 2. Turn on the connected devices. 3. Ensure the POWER LED displays a solid orange.
DLP Projector – User’s Manual – 12 – 5. When the “Power Off? /Press Power again” message appears, press the POWER button. The projector turns off. Caution: Do not unplug the power cord until the POWE R LED change to orange–indicating the projector has cooled down.
DLP Projector – User’s Manual – 13 – Setting an Access Password (Security L ock) You can use the four (arrow) buttons to set a password and pr event un authorized use of the projector. When enabled, the password must be entered after you p ower on the projector.
DLP Projector – User’s Manual 5. You can use the cursor buttons ▲▼◄► either on keypad or IR remote control for password entry. You can use any combination including the same arrow five times, but not less than five. Press the cursor buttons in any order to set the password.
DLP Projector – User’s Manual Adjusting the Projector Level Take note of the following when setting up the projector: • The projector t able or stand should be level and sturdy . • Position the projector so that it is perpendicular t o the screen.
DLP Projector – User’s Manual Adjusting the Keystone 1. V olume + - Use the KEYSTONE buttons the remote control to correct image-trapezoid (wider top or bottom) effect.
DLP Projector – User’s Manual – 17 – Adjusting the Volume 1. Press the Volume +/- buttons on the remote control. The volume control appears on the display.
DLP Projector – User’s Manual O N -S CREEN D ISPLAY (OSD) M ENU S ETTINGS OSD Menu Controls The projector has an OSD that lets you ma ke image adjustments and c hange various settings. Navigating the OSD You can use the remote control curs or buttons or the buttons on the top of the projector to navigate and make changes to the OSD.
DLP Projector – User’s Manual Setting the OSD Language Set the OSD language to your pr eference before continuing. 1. Press the MENU button. Press the cursor ◄► button to navigate to Installation I. 2. Press the cursor ▲▼ button until Language is highlighted.
DLP Projector – User’s Manual OSD Menu Overview Use the following illustration to quickly find a se tting or determine the range for a setting. Image Brightness Contrast Sharpness PC, MAC, Video, .
DLP Projector – User’s Manual OSD Sub-Menu Overvie w – 21 –.
DLP Projector – User’s Manual Image Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image Menu . Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to change values for settings.
DLP Projector – User’s Manual Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Advanced menu and then press Enter or ► . Press ▼▲ to move up and down in the Advanced menu.
DLP Projector – User’s Manual Color Manager (Enter) / ► to enter the Color Manager sub menu. Press I TEM D ESCRIPTIO N Select to enter the Red Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Red Select to enter the Green Col or Manager.
DLP Projector – User’s Manual Computer Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Com- puter menu. Press the cursor ▲▼ button to move up and down in the computer menu. Press ◄► to change values for settings.
DLP Projector – User’s Manual Video/Audio Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Video/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu. Press ◄► to change values for settings.
DLP Projector – User’s Manual Audio (Enter) / ► to enter the Audio sub menu. Press I TEM D ESCRIPTIO N Volume Press the ◄► buttons to adju st the audi o volum e. Mute Press the ◄► buttons t o turn on o r off the s peaker. Press the cursor ◄► button to select audio input.
DLP Projector – User’s Manual Installation I Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion I menu. Press the cursor ▲▼ button to move up and down in the Installation I menu. Press ◄► to change values for settings.
DLP Projector – User’s Manual Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Installation I menu. Press ▲▼ to move to the Advanced menu and then press Enter or ► . Press ▲▼ to move up and down in the Advanced menu.
DLP Projector – User’s Manual Installation II Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion II menu.
DLP Projector – User’s Manual – 31 – Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Installation II menu. Press ▲▼ to move to the Advanced menu and then press Enter or ► . Press ▲▼ to move up and down in the Advanced menu.
DLP Projector – User’s Manual OSD Menu Setting I TEM D ESCRIPTIO N Menu Position Press ◄► button to select diffe rent OSD locati on. Translucent Menu Press ◄► butt on to select O SD backgrou nd translucent l evel. Menu Disp lay Press ◄► button to select O SD timeout delay.
DLP Projector – User’s Manual – 33 – Lamp Hour Reset Please refer to Resetting the Lamp on page 42 to reset the lamp hour count er. 3D I TEM D ESCRIPTIO N 3D Press ◄► to select Off, DLP-Link or IR. 3D Sync In vert Press ◄► to turn 3D Sy nc Invert O n or Off.
DLP Projector – User’s Manual Network I TEM D ESCRIPTIO N Network State Displays the network conn ection status. Press ◄► to turn DHCP On or Off. DHCP Note: If you select DHCP Off, complete the IP Address, Subnet Mask , Gateway, and DNS fields.
DLP Projector – User’s Manual For simplicity and ease of operation, the proj ector provides diverse networking and rem ote management features. The LAN/RJ45 function of the pr ojector through a network, such as remotely manage: Power On/Off, Brightness and Contra st settings.
DLP Projector – User’s Manual 3. Right-click on Local Area Connection , and select Properties . 4. In the Properties window, select the General tab, an d select Internet Protocol (TCP/IP) . 5. Click Properties . 6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK .
DLP Projector – User’s Manual 7. Press the Menu button on the projector. 8. Select Installation II → Advanced → Ne twork . 9. After getting into Net work , input the following: ` DHCP: Off ` IP Address: 10.10.10.10 ` Subnet Mask: 255.255.255.0 ` Gateway: 0.
DLP Projector – User’s Manual C ATEGORY I TEM I NPUT -L ENGTH IP Address 14 – 38 – IP ID 2 Crestron Control Port 5 Projector Name 10 Location 9 Projector Assigned To 8 DHCP (Ena bled) (N/A) IP.
DLP Projector – User’s Manual Factory Reset Press the cursor ▲▼ button to move up and down in the Installation II menu. Select the Factory Reset sub menu and press (Enter) / ► to reset all the menu items to the factory default values (expect Language and Security Lock).
DLP Projector – User’s Manual – 40 – M AINTENANCE AND S ECURITY Replacing the Projection Lamp The projection lamp should be replaced when it burns out. It should only be r eplaced with a certified replacement part, which you can order from your local dealer.
DLP Projector – User’s Manual 3. Remove the two screws from the lamp module. 4. Lift the module handle up. 5. Pull firmly on the module handle to remove the lamp module. 6. Reverse steps 1 to 5 to install the new lamp module. While installing, align the lamp module with the connector and ensure it is level to avoid damage.
DLP Projector – User’s Manual – 42 – Resetting the Lamp After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following: 1. Press the MENU button to open the OSD menu. 2. Press the cursor ŻŹ button to move to the Installation II menu.
DLP Projector – User’s Manual – 43 – Cleaning the Projector Cleaning the projector to remove dust and gr ime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning.
DLP Projector – User’s Manual Using the Physical Lock ® Using the Kensington – 44 – Lock If you are concerned about security, attach the proj ector to a permanent obje ct with the Kensington slot and a security cable. Note: Contact your vendor for details on purchasing a suitable Kensi ngton security cable.
DLP Projector – User’s Manual – 45 – T ROUBLESHOOTING Common problems and solut ions These guidelines provide tips to deal with problem s you may encounter while using the projector. If the problem remains unsolved, cont act your dealer for assistance.
DLP Projector – User’s Manual – 46 – LED Error Messages E RROR C ODE M ESSAGE S W ARNING LED L AMP LED B LINK P OWER LED B LINK Power On 0 0 Blue Power Off 0 0 Oran ge Cooling 0 0 Flashing Ove.
DLP Projector – User’s Manual – 47 – Lamp Problems Problem: There is no light from the projector 1. Check that the power cable is secure ly connected. 2. Ensure the power source is goo d by te sting with another electrical devi ce. 3. Restart the projector in the co rrect order and check that the Powe r LED is green.
DLP Projector – User’s Manual – 48 – HDMI TM Q & A Q. What is the difference between a “Standard” HDMI TM cable and a “High-Speed” HDMI TM cable? Recently, HDMI TM Licensing, LLC announced that cables would be test ed as Standard or High-Speed cables.
DLP Projector – User’s Manual – 49 – S PECIFICATIONS Specifications Model name D795WT Display ty pe TI DMD 0.65" WXGA Resolution WXGA 1280 x 800 Native Projection distance 22.
DLP Projector – User’s Manual – 50 – Projection Distance vs. Projection Si ze D L H Image Height W Image Width Projection Distance and Size Table WXGA D795WT 16:10 Distance 62.
DLP Projector – User’s Manual – 51 – Timing Mode Table The projector can display several resolutions. The following table outlines the resolutions that can be displayed by the projector. S IGNAL R ESOLUTION H-S YNC (KH Z ) V-S YNC (H Z ) C OMPOSITE / S-V IDEO C OMPONENT RGB ( ANALOG ) DVI/ HDMI TM ( DIGITAL ) NTSC — 15.
DLP Projector – User’s Manual – 52 – S IGNAL R ESOLUTION H-S YNC (KH Z ) V-S YNC (H Z ) C OMPOSITE / S-V IDEO C OMPONENT RGB ( ANALOG ) DVI/ HDMI TM ( DIGITAL ) 720p 37.5 50.0 — O — O 720p 45.0 60.0 — O — O 1080i 33.8 60.0 — O — O 1080i 28.
DLP Projector – User’s Manual Projector Dimensions 319.00 354.00 41 1.00 219.00 157.00 – 53 –.
DLP Projector – User’s Manual – 54 – R EGULATORY C OMPLIANCE FCC Warning This equipment has been tested and found to comply wi th the limits for a Class B digital device pur- suant to Part 15 of the FCC Rules.
2 0 1 0 0 9 2010 V ivitek Corporation. All rights reserved. All trademarks are the property of their respective owners. All specifications are subject to change without prior notice.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Vivitek D795WT c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Vivitek D795WT - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Vivitek D795WT, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Vivitek D795WT va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Vivitek D795WT, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Vivitek D795WT.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Vivitek D795WT. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Vivitek D795WT ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
