Manuel d'utilisation / d'entretien du produit 100 du fabricant Vidikron
Aller à la page of 29
LIGHT AMP™ DLP™ PROJECTOR V ersion 1.1.
1 T ABLE OF CONTENTS Introduction ......................................................................................................................... 2 W arnings & Safety Precautions ..........................................................
2 INTRODUCTION » Introduction to the Vidikr on V ision Model 100 LIGHT AMP™ DLP™ Projector V idikron’ s new flagship V ision™ Model 100 has been specifically engineered to produce high performance video in the kinds of environments most people use to enjoy their entertainment - family rooms, great rooms and living rooms.
W ARNINGS & SAFETY PRECA UTIONS 3 W ARNING FCC Regulations state that any unauthorized changes or modications to this equipment not expressly approved by the manufacturer could void the user ’ s authority to operate this equipment. CAUTION: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT REMOVE COVER.
4 W ARNINGS & SAFETY PRECAUTIONS DECLARA TION OF CONFORMITY VIDIKRON PROJECTOR, MODEL 100 This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: (1) .
5 LIMITED W ARRANTY TWO YEAR LIMITED W ARRANTY For Projectors, V ideo Processors and Controllers Congratulations on your purchase of a V idikron video product and welcome to the V idikron family! W ith proper installation, setup and care, you should enjoy many years of unparalleled video performance.
LIMITED W ARRANTY 6 This Limited W arranty begins on the effective date of delivery to the end user . For your convenience, keep the original bill of sale as evidence of the purchase date.
1. DVI 1 (Digital) DVI input #1, HDCP compliant. DVI 2 (Digital) DVI input #2, HDCP compliant. 2. COMPONENT VIDEO (RCA connectors) Standard Denition (480i/576i) Component (YPrPb) input.
8 7. IR W ired input from an external remote control. 8. RS-232 CONTROL Connection for an external RS-232 controller device to place the Projector under system automation control. 9. V ACUUM FLORESCENT DISPLA Y Reads out all relevant status information of the Projector at all times.
REMOTE CONTROL DESCRIPTION 9 .
10 REMOTE CONTROL DESCRIPTION MEMOR Y SETTINGS BUTTONS Four video preset memory setting buttons are available: 8. ISF NT – ISF Night 9. ISF DA Y – ISF Day 10.
1 1 QUICK CONNECTION AND SETUP GUIDE While there are many different ways to connect your source equipment to your V idikron Projector , the examples below are the most common. ANALOG INPUTS: • Composite V ideo Input Composite video is the most common type of signal used, but is also the lowest in picture quality .
12 QUICK CONNECTION AND SETUP GUIDE Step I Connection: 1. Connect Power to the Projector . 2. Connect V ideo (Composite), S-V ideo to 1 or 2, Component 480i (RCA) input, HD signals to HD1 or HD2 (BNC), DVI 3. T urn ON the system from the projector control panel and main power switch.
13 HOW TO INST ALL OR REMOVE THE PROJECTOR LAMP IMPOR T ANT NOTE: LAMP INST ALLA TION OR REMOV AL SHOULD ONL Y BE PERFORMED BY AN AUTHORIZED VIDIKRON SYSTEM INST ALLER OR TECHNICIAN. Step One: INSURE PROJECTOR AC POWER IS OFF AND POWER CORD IS REMOVED PRIOR TO INST ALLING OR REMVOING THE LAMP ASSEMBL Y .
14 Lamp Assembly Handle Next, grasp the lamp assembly handle and pull gently , removing the lamp module out of the projector housing. HOW TO INST ALL OR REMOVE THE PROJECTOR LAMP Step Four: Replace lamp module and replace, retighten all screws.
15 LENS SHIFT RANGE Lens Option 1: Thr ow Distance 1.2 - 1.4 x Width of Scr een Example: 56” x 100” Screen TD = 120” to 140” lens to screen When only V ertical or only Horizontal Shift is used: Maximum. V ertical Shift ↑ = 60% of screen height (.
16 LENS SHIFT RANGE Lens Option 4: Thr ow Distance 2.35 - 3.60 x Width of Scr een Example: 56” x 100” Screen TD = 235” to 360” lens to screen When only V ertical or only Horizontal Shift is used: Maximum. V ertical Shift ↑ = 60% of screen height (.
LENS SHIFT RANGE .
MENU DESCRIPTION AND NA VIGA TION 18 When the MENU button is pressed on either the remote control or the rear panel, the main menu will appear on-screen. An example of the main menu is shown to the right. The UP and DOWN buttons on the rear panel, and IR Remote Control will move the selected item on the menu.
19 MENU DESCRIPTION AND NA VIGA TION Aspect Ratio provides selection of one of ve aspect ratios: Anamorphic, Standard 4:3, Letterbox, IntelliWide and Cinema. T o select an aspect ratio via the main menu, press either the up and down buttons on the remote or rear panel, highlight ASPECT RA TIO and press ENTER.
MENU DESCRIPTION AND NA VIGA TION 20 While each of the picture quality adjustments can be set to suit the needs of the user, there is a ‘proper ’ way to set the adjustments. For setting TINT and COLOR, please refer to the color bar test pattern below .
21 MENU DESCRIPTION AND NA VIGA TION » Input Position Indicates selection has been made for the Input Position selection menu. These settings are stored separately for each input and each resolution for that input. • Press ENTER to shift the Image Position Left/Right with the LEFT and RIGHT arrows.
BASIC TROUBLESHOOTING TIPS The following is a basic troubleshooting guide that can assist you in resolving typical problems may result in normal operation. If you have encountered problems that are not listed in this guide, please contact your V idikron dealer for assistance.
Baud rate: 19200 (xed) Bits: 8 No Parity All protocol in ASCII format RS-232 input connector pin numbers: TxD= Pin# 2, RxD= Pin# 3, GnD= Pin# 5 Command format (single command): command value (i.e. brightness 100). NOTE: A space (not an underscore) or comma may be used between the command and its value.
Command Parameter V alue Stored? Description (min/max) POWER 0/1 NA T urns Projector On and Off ON NA NA T urns Projector On OFF NA NA T urns Projector Off COMPOSITE NA YES Selects the Composite video.
Command Parameter V alue Stored? Description (min/max) IHPOS? NA NA Returns input horizontal position value IHEIGHT? NA NA Returns input vertical height value OHPOS? NA NA Returns output horizontal po.
DIMENSIONS 26 .
SPECIFICA TIONS 27 V ision Model 100 Projector: Projector T ype: Digital Light Processing™ (DLP™), 3-chip, 16:9 HD-2+, DMD™ Native Resolution: 1280 x 720 (16:9) Aspect Ratios: 4:3, Letterbox, 16.
R UMA-011085 1-18-05 v1.1 V idikron 2900 Faber Street Union City , CA 94587 Ph (510) 324-5900 / Fax (510) 324-5905 1-888-4-VIDIKR ON.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Vidikron 100 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Vidikron 100 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Vidikron 100, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Vidikron 100 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Vidikron 100, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Vidikron 100.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Vidikron 100. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Vidikron 100 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
