Manuel d'utilisation / d'entretien du produit XC631Plus du fabricant Uniden
Aller à la page of 36
UnidE!n@ XC631 Plus Add-onHandset and Charging Base Operating Guide.
'f '------ --- --- ~ I I I ':1 I' I; This pageintentionally left blank, 2.
CONTENTS bnportlntNotes 5 Please Read thisfirst 5 Safetylnfonnation 7 Battery Safety Precautions 9 PartsChecklist 11 Features 13 HandsetFunctions 15 Installation 17 Selecting the Installation Location. . . . . . . . . . . . . . . . . . . . .17 InstallingtheBatteryPack .
This page intentionally /eft blank. 4.
IMPORTANT NOTES PLEASE READ mIS FIRST Thank you for purchasing your XC631 Plus Add on Handset and Charging Base. This product has been designed to expand your existing XC631 Cordless Telephone to give you the convenience of multiple Handset use. Please refer to the following Features Section for the benefits you can now enjoy.
IMPORTANT NOTES Your phone operates on standard radio frequencies. It is possible for other radio units operating nearby on similar frequencies to uninten- tionally intercept your conversation or cause interference. Possible lack of privacy can occur with any cordless telephone.
SAFETY INFO RMATI 0 N Whenusing your telephoneequipment, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product.
SAFETY INFO RMATI 0 N 9. Donot overload wall outlets and extension cords, as this can result in the risk of fire or electrical shock. z 0 ~ 0 ~ z ~ 10. Never push objects of any kind into this product through cabinet slots,as theymay touch dangerous voltage points or short out parts that could result in a risk of fire or electrical shock.
SAFETY INFORMATION BATIERY SAFElY PRECAUTIONS A. To reduce the risk of fire or injury to persons by the battery, read and follow these instructions: 1. Use only the operating type and size battery pack specified in this Operating Guide. 2. Do not dispose of the battery pack in a fire.
- ----- This pageintentionally left blank. 10 ~.
PARTS CHECKLIST Congratulations on your purchase of this Uniden XC631 Plus add on Handset. This product has been designed and engineered to exact standards for reliability, long life, and outstanding perfonnance. To get the most from your new purchase, please read this Operating Guide thoroughly.
PARTS CHECKLIST If your Cordless Telephone is not perfonning up to your expectations, please try the simple steps listed in the Troubleshooting section of this manual. If you are still unable to resolve the problems, please contact your retailer or Uniden Customer Service for assistance, toll free on 1800 632 789.
FEATURES XC631 plus Add-On Handset and Charging Base for use with the xc631 Cordless Phone, which supports up to 4 Handsets (supplied with 2). . Calls can be transferred between Handsets. . Colour coded for easy personal ownership and recognition. . Up to four family members can have their own colour coded Handset.
This page intentionaUy left blank. 14.
HANDSET FUNCTIONS TALK INDICATOR TALK BUTTON HANDSET ANTENNA Handset Antenna Telescopic Antenna. batt Iow Indicator - Talk Indicator Numeric Keys The red LED blinks when the Battery Pack is low and needs to be recharged. Press to place or answer a call.
HANDSET FUNCTIONS fDIIi1D This button redials the last dialed number. When on a call, press to send a timed "hook-flash" on the telephone line for accessing special telephone services. CiIIIID Use to select 1 of the 10 channels for the clearest operation.
INSTALLATION Selecting the Installation Location Select a location for the xc631 Plus to avoid excessive heat or humidity (as in a kitchen or bathroom). The Charging Base can be placed on a desk, tabletop or mounted on a wall near a standard 230/240V AC outlet.
IN S TAL LAT I 0 N Installing the Battery Pack z 0 ~ ~ ~ rJ.:; z ~ ~ 0 - 1. Remove the battery compartment cover on the back of the Handset by sliding it up. 2. Connect the Nickel-Metal Hydride Battery Pack by plugging it into the socket inside the battery compartment.
INSTALLATION a) Check to see that the AC Adaptor is plugged in and the wall outlet is switched on. b) Re-adjust the handset until the charge LED lights up. c) Clean the charge contacts. Low Battery Indicator When the Battery Pack voltage level in the Handset is very low and needs to be re-charged, the batt Iow LED blinks.
This page intentionaUy left blank. 20.
USING YOUR XC631 PLUS Registering your Handset for first time use After the Handset has been fully charged, the Handset MUST be placed on to the main xc631 Base Unit to register it as an additional Handset before first time use. The Handset will not work with the Base Unit until it has been registered.
USING YOUR XC631 PLUS 4. After five seconds unplug the AC Adaptor from the Base Unit again. 5. Plug the ACAdaptor back into the Base Unit to restore the power. 6. Place each Handset onto the Base Unit for at least 5 seconds. The new Digital Security Code has now been transferred to all Handsets.
USING YOUR XC631 PLUS N~~: H you have more than one cordless phone in your house, i they must be set to different channels. Using the IIfiEiIiIiIJ Button When initiating a call, this button will operate as a redial button. When on a call it will work as a flash button to access special telephone network services.
USING YOUR XC631 PLUS I NOTE: The Flash/Rdl & «9 call waiting procedure r togglescall betweenthe incoming and original call and vice versa. The Flash/Rdl & 8 procedure will drop the current call connection and pick up the incoming call or the call on hold.
USING YOUR XC631 PLUS NOTE: r If you don't place the Handset back on the Charging Base,press - to hang up the phone. Sometimes when you press -you may get an error tone and the phone will not disconnect. This may occur during conversations under noisy conditions.
USING YOUR XC631 PLUS I 3. If you wish to enter a delay between numbers (for accessing a switch board or long distance service), press Flash/Rdl at the point in the number sequence you wish to pause. (Note: The Flash/Rdl button counts as one digit. Pressing more than once will increase the length of the pause between numbers).
USING YOUR xc631 PLUS Storing Long Numbers in Memory At times you may need to program a number longer than 16 digits- for your alternate long distance service or for telephone banking. To get around the 16 digit limitation (concerning memory location stor- age), divide the number between two different locations.
USING YOUR XC631 PLUS Dialing a Stored Number To dial a number stored in memory, press IliII , then press - and then the memory locationnumber (0-9) Using the Page Feature The Page Feature sends a signal from the Base Unit to the Handset causing it to beep.
TROUBLESH OOTIN G If your Cordless Telephone is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service for assistance. 29 Problem Suggestion Charge light does not come on .
TROUBLESHOOTING I ..:) z ~ ~ 0 0 :::t= er.:; ~ ~ §§ 0 ~ ~ 30 . Try unplugging some of the other phones. You may have too many extension phones on your telephone line. . Disconnect the AC Adaptor for a few minutes and reconnect it. Handset can't ring or receive a .
TROUBLESHOOTING Important Electrical Considerations Unplug all electrical appliances when you know an electrical storm is approaching. lightning can pass through your house- hold wiring and damage any device connected to it. The XC631 Plus in no exception.
TROUBLESHOOTING c.,:, z ~ ~ 0 0 =c crJ ~ ~ §§ 0 ~ ~ Radio Interference Radio interference may occasionally cause buzzing and humming in your cordless Handset, or clicking noises in the Base Unit. This interference is caused by external sources such as a TV, refrigerator, vacuum cleaner, fluorescent lighting, or electrical storm.
SPECIFI CATIONS General Frequency control. . . . . . . . . .Crystal controlled transmission Modulation FM Operating temperature. . . . . .-00 C to 400 C Charging Base Unit Power Source. . . . . . . . . . . . .AAD650U AC Adapter Approval Number 14700 Output: 9V DC - 350 mA Input: 230 - 240V AC 50 Hz Size Approx.
This page intentionally left blank. 34.
WARRANTY UoideD XC6311 YEAR WARRAN1Y (Batteries and Accessories are covered for 90 Days ONLY) Note: Please keep your sales docket as it provides evidence of warranty. Warranty is only valid in the country where the product has been purchased. WARRANTOR: [;niden Australian Ply Ltd.
Unid~n@ A Clear Signal of What's Ahead. @ 1998 UNIDEN CORPORATION. ALL RIGHTS RESERVED..
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Uniden XC631Plus c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Uniden XC631Plus - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Uniden XC631Plus, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Uniden XC631Plus va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Uniden XC631Plus, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Uniden XC631Plus.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Uniden XC631Plus. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Uniden XC631Plus ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
