Manuel d'utilisation / d'entretien du produit EXP2905 du fabricant Uniden
Aller à la page of 40
EXP2905 Final-10/09 10/9/01 11:23 AM Page 1.
2 The ex clamation poin t within an equilateral trian gle is intend ed to alert the user to the pr esence of important operatin g and main tenance (servi cing) instructi ons in the liter ature accompanyin g the appliance .
3 Important Electrical Considerations Unplug all electrical appliances when you know an electrical storm is approaching. Lightning can pass through your household wiring and damage any device connected to it. This phone is no exception. W arning! Please do not attempt to unplug any appliance during an electrical storm.
4 • Keep the base and handset away from sources of electrical noise such as motors or fluorescent lighting. • Be sure there is sufficient space to fully extend the base antenna. • The base can be placed on a desk or tabletop or mounted on a standard telephone wall plate.
5 T able of contents T able of contents Getting Started 6 Read this first 7 Step 1: Checking the package contents 8 Step 2: Setting up the base phone 1 1 Step 3: Preparing the batter y pack 1 3 Identi.
Getting Started Read this first Before you use your phone, you must first set it up. Here's a quick way to set up your phone: Steps 1, 2 and 3. Step 1 (page 7) First, unpack the phone and the supplied accessories.
Getting Started 7 Getting Started Uniden P arts Department (800) 554-3988 Hours: M-F 7:00 AM to 5:00 PM CST . W e can also be reach ed on th e web at www .unid en.com Step 1 Checking the package contents Make sure you have received the following items in the package.
8 Getting Started Step 2 Setting up the base phone Do the following steps: • Choose the best location • Connect the base phone • Choose the dialing mode Choose the best location Where you place the base phone affects the reception quality of the handset.
Getting Started Getting Started continued 9 To LINE 3 To DC IN 9V To an AC outlet To the telephone outlet Telephone line cord (supplied) 1 AC power adapter (supplied AD-314) 2 Align the ∆ marks. Route the cord 1 Connect the telephone line cord to the LINE jack and to a telephone outlet.
10 Getting Started DIAL MODE switch Step 2: Setting up the base phone (continued) Notes • Use only the supplied AD-314 AC power adapter . Do not use any other AC power adapter . • Connect the AC power adapter to a continuous power supply . • Place the base phone close to the AC outlet so that you can unplug the AC power adapter easily .
Getting Started Getting Started continued 11 BT-905 Black Red CHARGE LED Step 3 Preparing the batter y pack Charge the battery pack for 15-20 hours before you start using your phone.
12 Getting Started Step 3: Preparing the batter y pack (continued) Batter y duration A fully charged battery pack lasts for about: • approx. 7 hours when you use the handset continuously . • approx. 7 days when the handset is in standby mode. Notes • The battery pack will gradually discharge over a long period of time, even if not in use.
Getting Started Getting Started continued 13 Identifying the parts Refer to the pages indicated in parentheses for details. 1 Antenna 2 Speaker 3 T ALK/BA TT LO W LED (p. 16, 20) Lights up during a call, flashes when you store a phone number for memory dialing.
14 Getting Started 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1 EDIT button (p. 21) Used to store numbers for memory dialing. 2 Dialing keys (p. 17) 3 * TONE button (p. 17, 19) Allows you to switch temporarily to tone dialing. 4 LINE LED (p. 17, 19, 25) Lights when one of the phones is in use.
Getting Started Getting Started 15 18 19 20 21 15 VOLUME control (p. 17, 19) Adjusts the speaker volume. 16 INTERC OM button (p. 28) Used to make an intercom call. 17 INTERC OM LED (p. 27) Lights up during an intercom call. 18 RINGER switch (p. 24) Adjusts the ringer volume.
16 Basics Basics Making calls Additional tasks T o Do this Put a call on hold Press . The T ALK/BA TT LOW LED flashes slowly . Press to resume the conversation. Select a better channel Press . Adjust the handset Set the VOL switch to H (high), M (middle) or L V olume (low).
Basics Basics continued 17 SPEAKER LED LINE LED VOLUME control SPEAKER FLASH REDIAL/P HOLD * TONE If the handset battery becomes weak during a call Y ou hear a beep every three seconds and the T ALK/BA TT LOW LED on the handset flashes. The call will disconnect soon.
18 Basics Making calls (continued) T o obtain the best speakerphone performance • Y ou may not be able to hear the other party ’ s voice in a noisy place. Therefore, use the speakerphone in a quiet room. • Do not bring your hand or other object too close to the microphone or you will hear a shrill noise ( “ feedback ” ).
Basics Basics 19 SPEAKER LED LINE LED VOLUME control SPEAKER FLASH HOLD * TONE Receiving calls 1 When you hear the phone ring; • Press (or any key except ). or • Pick up the handset from the base phone when the handset is placed on the base phone.
20 T elephone Features TALK/BATT LOW LED MEMORY OFF TALK REDIAL/P T elephone F eatures Memor y dialing Y ou can dial with a touch of a few buttons by storing a phone number on a dialing key . Y ou can store up to 10 different phone numbers separately on the handset and on the base phone.
T elephone Features T elephone F eatures continued 21 SPEAKER LED LINE LED SPEAKER REDIAL/P MEMORY 1 Press . The SPEAKER LED flashes quickly . 2 Press one of the dialing keys ( to ) for the phone number to be stored. Yo u ’ ll hear a confirmation beep.
22 T elephone Features T o store the previous number dialed Press directly after step 2, then go to step 4. T o store a number to be dialed via Private Branch Exchange (PBX) Before entering a phone number in step 3 on the previous page, do as follows: 1 Enter the outside line access digit (e.
T elephone Features T elephone F eatures continued 23 Setting the ringer type Y ou can select a ringer type from four types. 1 Press . 2 Press or . 3 Press a number button, to , to select a ringer type. Yo u ’ ll hear the corresponding ringer tone. 4 Press .
24 T elephone Features RINGER switch Setting the ringer type (continued) Checking the ringer type 1 Press . 2 Press or . 3 Press . The currently selected ringer sounds. 4 Press . Note If you hear no sound (only key beep), the ringer on the handset has been turned off.
T elephone Features T elephone F eatures continued 25 LINE LED Switching the phones during a call When you put a call on hold, you can return to the call on the other phone without disconnecting the call. 1 Press on the base phone. The LINE LED and the T ALK/BA TT LOW LED on the handset will flash slowly .
26 T elephone Features SPEAKER LED LINE LED SPEAKER Switching the phones during a call (continued) T o switch from the handset to the base phone 1 Press on the handset. The T ALK/BA TT LOW LED and the LINE LED on the base phone will flash slowly . 2 Press .
T elephone Features T elephone F eatures continued 27 T alking between the handset and the base phone (Intercom) Y ou can talk between the base phone and the handset. Y ou can start the intercom from either phone. T o talk from the handset to the base phone Press on the handset.
28 T elephone Features INTERCOM LED SPEAKER T alking between the handset and the base phone (Intercom) (continued) T o talk from the base phone to the handset Press on the base phone. The handset rings. T ALK/BA TT LOW LED on the handset flashes. When the person at the handset presses , you can talk.
T elephone Features T elephone F eatures continued 29 INTERCOM LED SPEAKER TALK/BATT LOW LED INTERCOM TALK T ransferring a call Y ou can transfer a call between the handset and base phone without disconnecting the call. T o transfer from the base phone to the handset 1 Press .
30 T elephone Features INTERCOM LED SPEAKER INTERCOM T ransferring a call (continued) T o transfer from the handset to the base phone 1 Press . The call is put on hold, the base phone rings. The INTERCOM LED on the base phone flashes. Y ou will be connected automatically after 3 seconds.
T elephone Features T elephone F eatures 31 SPEAKER LED SPEAKER Having a three-way conference The handset and the base phone operate like two extensions on the same line. Both phones can operate at the same time, so that you, the outside caller , and the person at the other phone can engage in a three-way conversation.
32 Additional Information Hang-up tab Telephone line cord AC power adapter cord Wall bracket Telephone line cord AC power adapter Wall plate AC outlet Additional Information Mounting the base phone on a wall 1 Raise the hang-up tab. 2 Plug the telephone line cord to the LINE jack and the AC power adapter to the DC IN 9V jack, and hook the cords.
Additional Information Additional Information continued 33 T roubleshooting If you ’ ve experienced any of the following difficulties while using your phone, use this troubleshooting guide to help you remedy the problem. Should any problem persist, call our customer hotline at 1-800-297-1023.
34 Additional Information Intercom Power source/battery Remedy • Make sure you follow the procedure in storing the number correctly (page 20). • When the handset is in use, you cannot store a memory dialing number on the base phone. • Replace the handset to the base phone for a while.
Additional Information Additional Information continued 35 Specifications General Frequency band 902 - 928 MHz Operating channel 40 channels Dial signal T one, 10 PPS (pulse) selectable Supplied accessories See page 7. Handset Power source Rechargeable battery pack BT -905 Battery charging time Approx.
Index 36 Additional Information A Adjusting volume handset volume 16 speaker volume 17, 19 B Battery pack charging 1 1 duration 12 C Connection 9 D, E, F , G, H Dialing mode choosing 10 switching to t.
37 Note EXP2905 Final-10/09 10/9/01 11:23 AM Page 37.
38 Note EXP2905 Final-10/09 10/9/01 11:23 AM Page 38.
39 One Y ear Limited W arranty Important : Evidence of original purchase is requir ed for warranty service. W ARRANTOR: UNIDEN AMERICA CORPORA TION (“Uniden”) ELEMENTS OF W ARRANTY : Uniden warran.
EXP2905 Final-10/09 10/9/01 11:23 AM Page 40.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Uniden EXP2905 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Uniden EXP2905 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Uniden EXP2905, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Uniden EXP2905 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Uniden EXP2905, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Uniden EXP2905.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Uniden EXP2905. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Uniden EXP2905 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
