Manuel d'utilisation / d'entretien du produit CT301 du fabricant Uniden
Aller à la page of 21
CT301 Cordless Telephone OPERATING GUIDE For Australia and New Zealand unid~n@ -- --- -_.- ----.
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read and understand all instructions. 2.
9. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 1 O.Never push objects of any kind into this prod- uct through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock.
CAUTION: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS BY THE BATTERY, READ AND FOllOW THESE INSTRUCTIONS. 1. Use only the appropriate type and size battery pack specified in the instruction manual pro- vided for this product. 2. Do not dispose of the battery pack in a fire.
About Your CT301 Congratulations on your purchase of the Uniden CT301 Cordless Telephone. The CT301 has been designed and engineered to exacting standards for reliability, long life, and outstanding performance. To get the most from your CT301 , please take a moment to read this Operating Guide thoroughly.
Nickel-Cadmium Battery Warning . This equipment contains a Nickel-Cadmium Battery. . Nickel-Cadmium Batteries must be disposed of properly. . The Nickel-Cadmium Battery contained in this equipment may explode if disposed of in a fire. . Do not short circuit the battery.
Handset Controls & Functions 0-9,*,# Buttons - Used for dialing numbers. TALK Button - Places the Handset into Talk mode or back to Standby. BA TT LO LED - Lights when the Handset is in the Talk mode. Flashes when the battery pack is Iow . and needsto be recharged.
BA TT LO LED TALK Button * (TONE) BUTTON TEL Line DC IN 9V I TIP Switch (Australian Model only) D Handset Antenna F (FLASH) Button R (Redial) ) Button 0 - 9, * (TONE), # BUTTON uniden Q Rechargeable B.
Installing Your CT301 Selecting the Installation Location You should carefutly select the installation location for freedom from excessive heat or humidity (as in a kitchen or bathroom), and away from sources of electrical noise, (such as motors or fluorescent lighting).
Reversing the Handset Retainer 1. Remove the Handset Retainer from the Base Unit by sliding it upward. 2. Flip the Retainer over so the tab is facing up. 3. Slide the retainer back into the Base Unit. NOTE: If you put the Retainer back into the Base Unit incorrectly, it will jam, and you'll need to pry it up with a screwdriver.
3. Place the battery pack into the battery compartment. 4. Replace the cover by sliding it on. Make sure not to get the wires from the battery pack caught in the cover. Charging the Battery Pack The rechargeable Ni-Cd battery pack included with your CT301 needs to be charged for approxi- mately 12-16 hours before first use.
Using Your CT301 Dialing a Number To dial a number with your CT301, first remove the Handset from the cradle. Next, press the TALK button. The BATT LO LED will then light.
Note: If you don't place the Handset back on the Base Unit, you need to press the TALK button to hang up the phone. You may find that sometimes pressing the TALK button does not hang up the phone, and the error tone will sound continuously. This may occur during conversations under noisy condi- tions.
Care & Mai ntenance Troubleshooti ng If your CT301 Cordless Telephone is not perform- ing up to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service at: Australia (02)559-3100,New Zealand (09)273-8383, during business hours, Monday through Friday.
Problem Charge light won't come on when Handset is placed in the cradle. Audio sounds weak and/or scratchy. Check Make sure that the Base Unit AC power cord is plugged both into the wall outlet, and into the Base Unit. Make sure the Ni-Cd battery pack is plugged into the Handset.
Important Electrical Considerations CAUTION: Electrical energy can perform many useful functions. The CT30 1 has been designed and manufactured to assure your personal safety. Improper use can result in potential electrical shock and fire hazards. Please carefully read all safety and operating instructions before installa- tion and use.
Telephone Line Problems If you are having trouble with your telephone service, you must first disconnect the CT301 to determine if it is the cause of your problem. If you determine that it is the cause, you must leave it disconnected until the trouble has been corrected.
Specifications General Frequency Control Crystal controlled trans- mission FM -10°C to 50°C Modulation Operating Temp Base Receive Frequency Transmit Frequency Power Requirements Size Weight Handset Transmit Frequency Receive Frequency Power Requirements Size Weight Battery Capacity Talk Mode Standby 39.
-17 - r CUT I I ~$- I I C~~ Wall mount template I IMPORTANT: I Before mounting, select a wall area of sufficient - ffi L strength. If mounting on wallboard or in an W I area of ques~ionable strength, locate a stud for I maximum support of your telephone.
WARRANTY UNIDEN CT301 1 YEAR WARRANTY (Batte~ies and Accessories are covered for 90 Days ONLY) Note: Please keep your sales docket as it provides evidence of warranty. Warranty is only valid in the country where the product has been purchased. WARRANTOR: Uniden Australia Pty.
unid~n Quality goes the Distance UDZZO1366ZA Printed in Hong Kong "".
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Uniden CT301 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Uniden CT301 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Uniden CT301, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Uniden CT301 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Uniden CT301, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Uniden CT301.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Uniden CT301. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Uniden CT301 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
