Manuel d'utilisation / d'entretien du produit TR2RRT-2S-2S du fabricant True Manufacturing Company
Aller à la page of 23
............ www.truemfg.com ............ TABLE OF CONTENTS Safety Information Safety Precautions 1 Proper Disposal 2 Connecting Electricity 3 Adapter Plugs 3 Installation / Operation Instructions Own.
............ www.truemfg.com ............ True Food Service Equipment, Inc..
This refrigerator must be properly installed and located in accordance with the Installation Instructions before it is used. Do not allow children to climb, stand or hang on the shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves.
............ www.truemfg.com ............ True Food Service Equipment, Inc. SAFETY INFORMATION 2 2 PROPER DISPOSAL OF THE REFRIGERATOR DANGER! RISK OF CHILD ENTRAPMENT USE OF EXTENSION CORDS NEVER USE AN EXTENSION CORD! TRUE will not warranty any equipment that has been connected to an extension cord.
The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.
............ www.truemfg.com ............ True Food Service Equipment, Inc. INSTALLATION / OPERATION INSTRUCTIONS 4 4 To insure that your unit works properly from the first day, it must be installed properly. We highly recommend a trained refrigeration mechanic and electrician install your True equipment.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 5 5 INSTALLATION / OPERATION INSTRUCTIONS 115 Volt Amps 20 30 40 50 60 70 80 90 100 120 140 160 Distance in Feet to Center of Load.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 6 6 INSTALLATION / OPERATION INSTRUCTIONS Step 2 A. Carefully lay the unit on its back to remove skid. Place packing material behind cabinet as a cushion. When lifting unit remember to leave the cabinet upright for 24 hours before plugging into power source.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 7 7 Step 4 A. Set unit in its final location. Be sure there is adequate ventilation in your room. Under extreme heat conditions, (100°F+, 38°C+), you may want to install an exhaust fan.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 8 8 INSTALLATION / OPERATION INSTRUCTIONS Once the cabinet is in its final location and level the roll-in ramp can be installed.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 9 9 INSTALLATION / OPERATION INSTRUCTIONS Step 4 A. Before your new unit is connected to a power supply, check the incoming voltage with a voltmeter. If anything less than 100% of the rated voltage for operation is noted, correct immediately.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 10 10 INSTALLATION / OPERATION INSTRUCTIONS True TR, TA, and TG cabinets are available with four different shelving / tray slide options. Type Kit #1. Angle Type Tray Slide Type Kit #2.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 11 11 INSTALLATION / OPERATION INSTRUCTIONS Installation Procedures (Pilasters): Install slotted thumb screws into threaded holes along the inside wall of the cabinet. Slide pilasters into position behind the slotted screws.
Shelf Standards Thumb Screw Thumb Screw Ceiling of Cabinet Shelf Shelf Standards Shelf Clip Shelf ............ www.truemfg.com ............ True Food Service Equipment, Inc. 12 12 HEATED CABINET SHELVING INSTALLATION/ OPERATION INSTALLATION / OPERATION INSTRUCTIONS SHELF INSTALLATION: A.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 13 13 INSTALLATION / OPERATION INSTRUCTIONS TA/TG/TR2RPT-2S-2S #1 TRAY SLIDE UNIVERSAL TRAY SLIDE #2 TRAY SLIDE WIRE SHELF P.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 14 14 INSTALLATION / OPERATION INSTRUCTIONS UNIVERSAL TRAY SLIDE #1 TRAY SLIDE #2 TRAY SLIDE WIRE SHELF PART #890081 PART #8.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 15 15 INSTALLATION / OPERATION INSTRUCTIONS FREEZERS DEFROST TIME CLOCK OPERATION (Grasslin Timer) RECOMMENDED DEFROST SETTINGS: True Manufacturing has factory set your defrost time clock to a recommended time and duration defrost scenario.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 16 16 MAINTENANCE, CARE & CLEANING Disconnect power to unit. Three door units will need the rainshield removed to easily access the condenser coil for cleaning. Back out the top screws (see image 2) and the bottom screws (see image 3) anchoring the rainshield.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 17 17 MAINTENANCE, CARE & CLEANING Condensers accumulate dirt and require cleaning every 30 days. Dirty condensers result in compressor failure, product loss, and lost sales.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 18 18 MAINTENANCE, CARE & CLEANING TEMPERATURE CONTROL ADJUSTMENT FOR HIGH ALTITUDE ONLY! TERMS: Cut-out - Temperature sensed by the controller that shuts the compressor off.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 19 19 MAINTENANCE, CARE & CLEANING CAUTION: Do not use any steel wool, abrasive or chlorine based products to clean stainless steel surfaces.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 20 20 MAINTENANCE, CARE & CLEANING WARNING: Disconnect power to cabinet before replacing light bulbs. INTERIOR LIGHTS: Simply squeeze the plastic lampshield together so the plastic lampshield is free and then pull down (See Image 1).
............ www.truemfg.com ............ True Food Service Equipment, Inc. 21 21 WARRANTY INFORMATION (U.S.A & CANADA ONLY!) ONE YEAR PARTS & LABOR WARRANTY TRUE warrants to the original purc.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté True Manufacturing Company TR2RRT-2S-2S c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du True Manufacturing Company TR2RRT-2S-2S - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation True Manufacturing Company TR2RRT-2S-2S, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le True Manufacturing Company TR2RRT-2S-2S va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le True Manufacturing Company TR2RRT-2S-2S, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du True Manufacturing Company TR2RRT-2S-2S.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le True Manufacturing Company TR2RRT-2S-2S. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei True Manufacturing Company TR2RRT-2S-2S ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
