Manuel d'utilisation / d'entretien du produit SISGM1040-162D du fabricant Transition Networks
Aller à la page of 132
6 10/100/1000 T + 2 10/100/1 000T/ 100/100 0 SFP Combo w / X-Ring Managed Industrial Sw itch User Manua l SISGM1040- 162D V1.01 September, 2009.
Transition Network s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1-95 2-941-7 600 1 The contents of t his manual are based on the t able below list ing firm w are version, soft w are ker nel version, and hardware version.
Transition Network s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 I FCC Warning This Equipment has been tested and found to comply wi th the limit s for a Class-A digita l device, pursuant to Part 15 of the F CC rules.
Transition Network s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 1 Content Introduction .............. ......... ......... .............. ......... ......... 1 Benefits ......... ......... .............. .
Transition Network s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1-95 2-941-7 600 2 Comman ds Le vel ........................................................... . 20 Comman ds Se t L ist..................................
Transition Network s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1-95 2-941-7 600 3 TFTP— Update Firmwar e ... ....................... ............. 53 TFTP— Restore Confi guration . ............. ................. 54 TFTP— Backup Configura tion .
Transition Network s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1-95 2-941-7 600 4 Trap C onfig urati on .......................................................... 88 SNMPV3 Confi gur ation .. ..........................
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 1 Introduction The 6 10/100/1000T + 2 10/100/1000T/ 100/ 1000 SFP Combo w/ X-Ring Managed Switch is a cost-eff ective solution and meets the high relia bility requireme nts demanded by industr ial applications.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 2 Port Base, Tag Base and T ype of Service Priority Port Mirror: Monitor tra f.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 3 Package C onte nts Please refer to the pack age content list below t o verify them against the checklist .
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 4 Ha rd w are Descr iption This s ection describes the Ind ustrial s witch’s hardware spec, port, c abling i nformation, and wiring installation.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 5 Top View The top panel of the 6 10/ 100/1000T + 2 10/100/1000T/ 100/1000 SFP Combo w/ X- Ring Managed Switch has one terminal block connector f or two DC power inputs.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 6 Off Power input 1 is inactiv e Green Power input 2 is active PWR2 Off Power input 2 .
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 7 Wiring the Powe r Inputs Please follow the steps below to insert the power wire. Insert the positive and negative wires into the V+ and V- contacts on t he terminal block connector.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 8 Wiring the Fault A larm Conta ct The fault alarm contacts are in the m iddle of the terminal block connector as the pictur e shows below.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 9 Mounting Ins tallation DIN-Rail M ountin g The DIN-Rail is installed on the industrial s witch at th e factor y. If t he D IN-Rail i s not installed, ple ase see t he f ollowing pictures to scr ew t he DIN-Rail onto t he switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 10 1. First, insert the top of DIN-Rail into the track. 2. Then, lightly push the DIN-Rail int o the track. 3. Check if the DIN-Rail i s tightened on the trac k or not.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 11 Wall Mou nt Plate Mount ing Follow the steps below to mount the industrial switch with a wall mou nt plate. 1. Remove t he DIN-Rail f rom t he in dustrial switch; loose t he scr ews to remove the DIN - Rail.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 12 Ha rd w are Installa tion This section descri bes how to physically inst all the 6 1 0/100/1000T + 2 10/100/1000T/ 100/1000 SFP Combo w/ X-Ri ng Managed Switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 13 Netw ork Application This section provi des som e sam ple applicati ons t o guide users.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 14 X-Ring A pplicati on The i ndustrial sw itch supports th e X-Ring protocol that can help the network r ecover from a c onnection failur e w ithin 3 00ms or l ess, ensuring network reliability.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 15 Coupling Rin g Applic atio n In the network, there may be more tha n o ne X- Ring grou p. The coupling ring f unction can connect e ach X-Rin g for red undant backup.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 16 Dual Homin g Applicatio n Dual Homing is a function to prev ent the con nection breaking between an X-R ing group and an upper level/cor e switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 17 Conso le Management Connecti ng to the Conso le Port The sup plied cabl e has an RS-232 connector on one end and a n RJ-45 connector on the other.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 18 Login in the Console I nterf ace W hen the connection between Switch an d PC is rea.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 19 Console lo gin interfac e CLI Mana gement The system supports a command line interf ace management–CLI. A fter you have logged in the system by typing in user name and pas sword, you will s ee a command prompt.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 20 The following table list s the CLI commands a nd description. Commands Level Modes Access Method Prompt Exit Method A bout This Mode1 User EXEC Begin a session with your switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 21 EXEC mode. Interface configuratio n Enter the interface command (with a specific interface) while in global configuration mode switch (config-if)# To exit to global configuratio n mode, enter exit.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 22 [System Location] location string xxx system description [System Description] G Set.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 23 dhcpserver subnetm ask [Subnet mask] G Configure subnet mask f or DHCP clients switch(config)# dhcpser ver subnetmask 255.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 24 no security G Disable IP security function switch(config)# no sec urity no security.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 25 no security I Disable security of interface switch(config)# interfa ce fastEthernet.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 26 or to 256000 kbps f or giga ports, and zero means no limit.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 27 Trunk Command s Set Command Level Description Example aggregator priority [1~65535].
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 28 show aggregator P Show the inform ation of trunk group switch# show aggregator 1 or.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 29 IEEE 802.1Q VL AN vlan 8021q nam e [GroupName] vid [VID] V Change the name of VLAN group, if the group didn’t exist, this command can’t be applied.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 30 [TaggedVID List] switch(vlan)# vlan 8021q trun k 3 hybrid-link untag 5 tag 6-8 show.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 31 spanning-tree hello - time [seconds] G Use th e spanning-tree hello-time global configuration command to specif y the interval between hello bridge protocol data units (BPDUs).
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 32 into the forwarding state. stp-path-priority [Port Priority] I Use the spanning-tre e port-priority interface configuration command to config ure a port priority that is used when t wo switches tie for position as the root switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 33 qos prioritytype [port-based|cos- only|tos-only|cos- first|tos-first] G Setting of .
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 34 no igmp-query G Disable IGMP query swi tch# no igmp -query Mac / Filter Table Commands Set Command Level Description Example mac-address- table static hwaddr [MAC] I Configure MAC address table of interface (static).
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 35 snmp system-nam e [System Name] G Set SNMP agent system name switch(config)# snmp s.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 36 security-level [NoAuthNoPriv| AuthNoP riv|AuthPriv] match-rule [Exact|Prifix] views.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 37 match-rule [Exact|Prifix] views [Read View Name] [Write View Name] [Notify View N ame] no snmpv3 mibview view [View N ame] type [Excluded|Included] sub-oid [OID] G Remove specified mibview table of SNMPV3 agent.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 38 switch(config-if)# no m onitor 802.1x Commands Set Command Level Description Example 8021x enable G Use the 802.1x global configuration command to ena ble 802.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 39 the NAS ID 8021x misc quietperio d [sec.] G Use th e 802.1x misc quiet period global configuration command to specif y the quiet period val ue of the switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 40 8021x portstate [disable | reject | acc ept | authorize] I Use the 802.1x port state interface configuration command to set the state of the selected port.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 41 SystemLog, SMTP and Event Command s Set Command Level Description Example systemlog ip [IP address] G Set System log server IP address.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 42 [Systemlog|SMTP |Both] event ring-topolog y- change [Systemlog|SMTP |Both] G Set X-.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 43 sntp enable G Enable SNTP function switch(config)# sntp en able sntp daylight G Enable daylight savin g time, if SN TP function is inactive, this command can’t be applied.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 44 time zone list no sntp G Disable SNTP function switch(config)# no sntp no sntp dayl.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 45 Web-Bas ed Mana gement This section introduces the configuration and functions of the Web-Based m anagement. A bo ut We b-base d Manag ement On the CPU board of the switch there is an embedd ed HTML web site residing in flash memory.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 46 S y stem L ogin 1. Launch the Internet Explorer on the PC 2. Key in “http:// “+” the IP address of the switch”, and then Press “ En ter ”.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 47 Main Page The home page of the W eb-base d screen mainly consists of a treevie w control item. For more details about each f unction, please click t he ‘+’ symbol of each no de to expand the tree structure.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 48 S y stem Inf ormat ion Assign the system na me, location and view the s ystem information. System Name: Assi gn the name of switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 49 IP Config uratio n User can configure the IP Settings and DHCP client f unction DHCP Client: Enable or disab le the DHCP client function.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 50 DHCP Ser ver—S ystem conf igur ation The system provides the DHCP server function. Enab le the DHCP server f unction, the switch system will be a DHCP server.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 51 DHCP Clien t—C lient Ent ries W hen the DHCP server function is active, the system will collect the DHCP client information and display it h ere.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 52 DHCP Ser ver—Port and IP Bi nding s You can assign the specif ic IP address that is the IP in th e dynamic IP assign range to the specific port.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 53 TFTP—Upd ate Firmw are TFTP allows t he user to u pdate the s witch firmware r emotely, via t he network. Before updating, make sure you have your TFTP server read y and the f irmware i mage is o n the TFTP server.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 54 TFTP—Rest ore Con figurat ion You can restore the switch confi guration f rom the TFTP server, but you must put the image file on TFTP ser ver first.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 55 TFTP—Back up Conf iguration You can sav e the cur rent switch c onfiguration from the switch to TF TP server, then g o to the TFTP restore conf iguration page to restore the sw itch configuration.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 56 S y stem E vent Lo g—S yslog Conf iguration Configure the system events that you want to record a nd the system log server IP. 1. Syslog Client Mode: Select the s ystem log mode – client o nly, serv er only, or both S/C.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 57 S y stem E vent Lo g—SM TP Configura tion You can set up the mail server IP, m ail account, account p assword, and forwarded em ail account for receiving the event alert.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 58 SMTP Confi guration interfa ce.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 59 S y stem E vent Lo g—Event Configu ration Y ou can select the system log events and SMTP event s. W hen selected events occur , the system will send out the log i nformation.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 60 Event Config uration interface.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 61 Fault Rela y A l ar m The Fault Relay Alarm function pr ovides the m echanism for warning w hen power or port faults are detected.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 62 SNTP Co nfigura tion You c an conf igure the S NTP (Simple Network Time Protocol) s ettings. Th e SNTP allo ws you to synchronize swi tch clocks via the Internet.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 63 HAW - Haw aiian Standard -10 hours 2 am Nome, Alaska -11 hours 1 am CET - Central E.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 64 Standard NZT - New Zealand 4. SNTP Sever URL: Set the SNTP server IP a ddress. 5. Daylight Saving P eriod: S et up the Daylight Saving beginning t ime and D aylight Saving ending time.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 65 IP Securit y The IP security f unction a llows the user to assign 10 sp ecific IP addresses th at have permission to access the switch thr ough the web bro wser for managing the switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 66 IP Securit y interface.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 67 User A ut hentica tion Here you can change l ogin user name and pa ssword for management s ecurity. 1. User name: Key in t he new user name (The default is “root”) 2.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 68 Port Stat istic s The following inf ormation provides the curre nt port statistic inform ation. Port: The port number. Type: Displays the cur rent speed of connection to t he port.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 69 Port Cont rol In Port control, you can view every port status that depended on user sett ing and th e negotiation result. 1. Port: select the port that you want to configure.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 70 Port Trunk The Link Aggr egation Control Pr otocol (LACP ) provides a sta ndardized .
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 71 the left f ield. To re move un wanted ports, select the p ort and click R emov e . W hen LACP enabled, you ca n conf igure LAC P Active/Passive status f or each port on State Activit y page.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 72 Aggregator Information W hen you hav e set up the aggre gator sett ing with LACP disabled, you will se e the local static trunk group inf ormation in here.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 73 State Activity Having set up t he LACP aggregator on the t ab of Aggregator S etting, you c an c onfigure the st ate activit y f or the mem bers of the LACP trunk group.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 74 Port Mirror ing The Port mirroring is a method f or monitoring traffic i n switched net works. Traf fic through ports can be monitore d by one specific port.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 75 Rate Limiti ng Y ou can set up every port’ s bandwidth rate an d frame limitation type. Ingress Limit Fram e type: Sel ect the f rame type that you expect to filter .
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 76 VL A N c onfigura tion A Virtual LAN (VLAN) is a l ogical network grouping t hat limits th e broadcast domain.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 77 VLAN configuration—Port-based VLAN Packets can go among only members of the same VLAN group. Note all unselected ports are tre ated as belongi ng to another single VLAN.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 78 VLAN—Port Based Add interface You will see the VLAN displays. Use D ele te button to delete unwante d VLAN. Use Edit button to modif y existing VLAN group.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 79 802.1Q VLAN Tag-based V LAN i s an IE EE 802.1Q s pecification sta ndard. T herefore, it is possible to create a V LAN across devices f rom different switch venders.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 80 802.1 Q Configur ation 1. Enable GVRP Pr otocol: check the check bo x to enable GVRP prot ocol. 2. Select the port that you want to configure.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 81 Group Confi guration interfa ce 3.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 82 Rapid Span ning Tree The Rapid Spanning T ree Protocol (RSTP) is an ev olution of the Spanning Tree Protocol and provides for f aster spanning tree conver gence after a topology c hange.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 83 RSTP S ystem Config uratio n interface.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 84 RSTP - Port Configuration You can configure pat h cost and priority of every port. 1. Path Cost: T he cost of the path to the other bridge from t his transmitt ing brid ge at the specified port.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 85 RSTP Port Conf iguration interface.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 86 SNMP Conf igura tion Simple Network Manageme nt Protocol (SNMP) is the protocol developed to manag e nodes (servers, workstations, routers, s witches and h ubs etc.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 87 SNMP S ystem Configurat ion interfa ce.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 88 Trap Configuration A trap manager is a m anagement station that receives traps, the system alerts generated b y the switch. If no trap m anager i s defined, no traps w ill issue.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 89 SNMPV3 Configuration Configure the SNMP V3 f unction. Context Table Configure SNMP v3 context t able. Assign the cont ext name of context table.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 90 SNMP V3 configurat ion interface.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 91 Group Table Configure SNMP v3 group tabl e. Security Name (User ID): Assign the user nam e that you have set u p in user table. Group Name: Set up t he group name.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 92 QoS Config urati on You can configure Qos policy an d priority setting, per port priority setting, COS a nd TOS setting. QoS Policy and Priority Type Qos Policy: select the Qos policy rule.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 93 QoS Configurat ion interfa ce.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 94 Port Base Priority Configure per port prio rity level. Port: Each port has 4 egress queues – High, Middle, Low, and Lowest. Click A pp ly .
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 95 IGMP C onfigurat ion The Internet Gr oup Man agement Protocol (IGMP) is an internal protocol of the Internet Protocol (IP ) suit e. I P m anages multic ast traffic b y using switches, routers, and hosts that support IGMP.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 96 IGMP Configura tion interface.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 97 X-Ring X-Ring provides a f aster re dundant recover y than Sp anning Tree topolo gy. The action is similar to STP or RSTP , but the algorithms a re different.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 98 to be the forwarding po rt of the Ring Master s witch. Enable Coupling Ring: To enable the co upling ring function. Marking the check box to enable the coupling ri ng function.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 99 LLDP Configurat ion Link Layer Discovery Protocol ( LLDP) is defined in the IEEE 802.1AB. It i s an emerging standard which provides a solution for the configuration issues caused b y expanding LANs.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 100 Securit y In this section, you can conf igure 802.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 101 802.1x S ystem Config uration interf ace.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 102 802.1x Port Conf iguration You c an co nfigure 802.1x authentication state f or each port. The State provides Disabl e, Accept, Reject and Authori ze.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 103 M isc Configur ation 1. Quiet Period: Set the period during which the port doesn’t try to ac quire a supplicant. 2. TX P eriod: Set the period the port wait for retransmit next EAPOL PDU during an authentication session.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 104 MAC Address Table Use the MAC address table to ensure port securit y.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 105 Static MAC Addresse s interface.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 106 M AC Filterin g By filtering MAC addre sses, the s witch can easily f ilter the pre-conf igured MAC address and reduce insecurit y. You can add and delet e filtering MAC address.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 107 All MAC Addres ses You can view all of t he MAC addresses learn ed by the selected port. Select the port number. The selected port of static & dynamic MAC address i nformation will be displayed in here.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 108 M AC Address Table—M ulticast Fil tering Multicasts are sim ilar to broadcasts. The y are sent to all e nd st ations on a LAN or VLAN.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 109 Factor y Default Reset s witch to def ault conf iguration.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 110 Save Con figuration Save all c onfiguration s t hat you h ave made in the system. Click Sav e to save the all configuration to the f lash memory.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 111 S y s tem R eboot Reboot the switch in soft ware reset.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 112 Troublesho oting Verif y t he s witch is using the r ight power c ord/adapter (DC 12-48V), please don’t use the power adapter with DC volt age higher t han 48V, or it may damage th e switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 113 Techn ical Specifica tion The 6 10/100/1000T + 2 10/100/1000T/ 100/ 1000 SFP Combo w/ X-Ring Managed Switch technical specif ication is following.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 114 Packet Buffer 1Mbits MAC address 8K MAC address table Flash ROM 4Mbytes DR A M 32M.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 115 Install DIN rail kit for DIN-type cabinet and wall mount ear for wall mount install Operation Temp.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 116 GVRP (256 Groups) Double Tag VLAN (Q in Q)* Private VLAN** Port Trunk w ith LACP LACP Port Trunk: 4 Trunk groups/ Maximum 4 trunk mem bers Class of service IEEE802.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 117 SNTP Supports Simple Network Time Protoco l to synchronize system clock in Internet.
Transition N etwork s SISGM1040-16 2D-LR 118 Appen dix 10 /100B A S E-T X Pin outs W ith10 /100BASE -TX cable, pins 1 and 2 are used f or transmitting d ata, and pins 3 and 6 for receiving data.
Transition N etwork s SISGM1040-16 2D-LR 119 Straight-thr ough cab le schemati c Cross over cable sc hemati c 10/100/100 0Bas e- TX Pin outs The following figure sh ows the 10/100/100 0 Ethernet RJ-45 pin outs.
Transition N etwork s SISGM1040-16 2D-LR 120 10/100/100 0Bas e- TX Cable Sch ematic Straight thr ough cable s sch ematic Cross over cab les sche matic.
Transition N etwork s SISGM1040-16 2D-LR 121 Gigabit Copper/SF P (mini- GBIC) combo port The Industrial s witch has t wo auto-detect Giga port—UTP/F iber c ombo ports. T he Gigabit Copper ( 10/100/1000T) ports should use Categor y 5e or above UTP/STP cable for connection.
Transition N etwork s SISGM1040-16 2D-LR 122 First, insert the transceiv er into the SFP slot. Notice that th e triangle m ark is the bottom of the slot.
Transition N etwork s SISGM1040-16 2D-LR 123 Second, insert the fiber cable of LC connector into the transceiver. Figure 2.1 0: LC conne ctor to the transceiver.
Transition N etwork s SISGM1040-16 2D-LR 124 To remove the LC connector f rom the transceiver, pleas e follow the steps sho wn below: First, press the upper side of the LC connector to release f rom the transceiver and pull it out.
Transition N etwork s SISGM1040-16 2D-LR 125 Cabling Use four twisted-pair, Category 5 e/above cabling for RJ-45 p ort connection. The cable between the switch and the link p artner (switch, hu b, workstation, etc.) must be less than 100 meters (32 8 ft.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Transition Networks SISGM1040-162D c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Transition Networks SISGM1040-162D - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Transition Networks SISGM1040-162D, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Transition Networks SISGM1040-162D va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Transition Networks SISGM1040-162D, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Transition Networks SISGM1040-162D.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Transition Networks SISGM1040-162D. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Transition Networks SISGM1040-162D ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.