Manuel d'utilisation / d'entretien du produit CPSMC0800-100 du fabricant Transition Networks
Aller à la page of 30
T r ansition Netw orks CPSMC08xx-100 8-Slot P ointSystem™ Chassis User’ s Guide revision B CPSMC0800-100 A C -powered CPSMC0810-100 DC -po wered.
2 CPSMC08xx-100 PointSystem™ Chassis 24 hour T echnical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Compliance Information CISPR22/EN55022 Class A + EN55024 CE Mark FCC Regulations T his equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules.
3 CPSMC08xx-100 PointSystem™ Chassis T able of Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 1.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 CPSMC08xx-100 PointSystem™ Chassis introduction 1 Intr oduction 1.1 Description T he T ransition Netw orks PointSy stem™ CPSMC08xx-100 is a 19-inch, rac k- mountable chassis for selected T ransition Networks media conv erter slide-in- modules.
5 CPSMC08xx-100 PointSystem™ Chassis introduction 1.2 Unpacking the CPSMC08xx-100 Equipment Use the following list to verify the shipment: Item P art Number 8-Slot chassis with A C power supply CPSM.
6 CPSMC08xx-100 PointSystem ™ Chassis slide-in-modules 2 Slide-in-Modules 2.1 Media Converter Slide-in-Modules T ransition Networks media con verter slide-in-modules, installed in slots at the front.
7 CPSMC08xx-100 PointSystem ™ Chassis slide-in-modules 2.1.3 Installing the Media Converter Slide-in-Modules CA UTION: W ear a grounding device and observe electrostatic disc harge precautions when installing the media con verter slide-in-module(s) into the chassis.
8 CPSMC08xx-100 PointSystem ™ Chassis slide-in-modules 24 hour T echnical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 2.2.4 Replacing the Media Converter Slide-in-Modules CA UTION: W ear a grounding device and observe electrostatic discharge precautions when replacing media con verter slide-in-module(s).
9 CPSMC08xx-100 PointSystem ™ Chassis slide-in-modules 24 hour T echnical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 2.2 Management Modules Optional network management is provided b y SNMP software embedded in T ransition Networks P ointSystem ™ management module(s) that can be installed in the CPSMC08xx-100 chassis.
10 CPSMC08xx-100 PointSystem ™ Chassis slide-in-modules 24 hour T echnical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 2.2.2 Installing the Management Modules CA UTION: W ear a grounding device and observe electrostatic disc harge precautions when installing the management module(s) in the CPSMC08xx-100 chassis.
11 CPSMC08xx-100 PointSystem ™ Chassis slide-in-modules 2.2.3 Replacing the Management Modules CA UTION: W ear a grounding device and observe electrostatic discharge precautions when replacing media con verter slide-in-module(s). F ailure to obser ve this caution could result in damage to, and subsequent failure of, the management module(s).
12 CPSMC08xx-100 PointSystem ™ Chassis po wer supply 3 P ow ering the CPSMC08xx-100 T he CPSMC08xx-100 chassis can be powered through an AC or DC power supply . An optional auxiliary power supply , with instant fail over protection, is also a vailable.
13 CPSMC08xx-100 PointSystem ™ Chassis po wer supply 3.1.2 DC P ow er Supply • T his product is intended to be used in a restricted access location. Proper earthing (grounding) is required to ensure safe operation. Grounding terminals are provided (section 4.
14 CPSMC08xx-100 PointSystem ™ Chassis po wer supply 3.2 Auxiliar y P ow er Supply T he CPSMC08xx-100 chassis can also be supplied with auxiliary power from an external power conv erter , which is connected to the c hassis through the auxiliary power inlet, located on the bac k panel.
15 CPSMC08xx-100 PointSystem ™ Chassis po wer supply 3.2.2 DC Auxiliar y P ow er Supply • T his product is intended to be used in a restricted access location. Proper earthing (grounding) is required to ensure safe operation. Grounding terminals are provided (section 4.
16 CPSMC08xx-100 PointSystem ™ Chassis chassis 4 CPSMC08xx-100 Chassis 4.1 Installing the CPSMC08xx-100 Chassis T he CPSMC08xx-100 can be installed in a standard 19-inch rac k or on a table, shelf, or other stable surface. CA UTION: Install the chassis so that the air flow ar ound it is not restricted.
17 CPSMC08xx-100 PointSystem ™ Chassis chassis T o install the CPSMC08xx-100 chassis into a standard 19-inc h rack: 1. Determine the preferred alignment of the c hassis in the rac k. NO TE: Installation bracket mounting screws are provided. Rac k mount screws and clip nuts are NO T provided.
18 CPSMC08xx-100 PointSystem ™ Chassis chassis 4.1.3 Grounding Lugs T he CPSMC08xx-100 comes equipped with grounding lugs, whic h are provided for a grounding conductor wire terminated with a two-hole, compr ession-type, grounding connector .
19 CPSMC08xx-100 PointSystem ™ Chassis chassis 4.2 Cascade Option T he management module cascade option allows the network administr ator to connect up to eight (8) CPSMC08xx-100 chassis into one manageable stac k, providing a single management source for up to 55 installed media con verter devices.
20 CPSMC08xx-100 PointSystem ™ Chassis chassis T o cascade two or more CPSMC08xx-100 chassis: 1. Locate one (1) T ransition Networks management module cascade cable (with RJ-45 connectors installed at both ends) (P/N 6026) for each set of tw o (2) chassis to be cascaded.
21 CPSMC08xx-100 PointSystem ™ Chassis chassis 24 hour T echnical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 4.3 Connecting the Slide-in-Modules to the Network Once the CPSMC08xx-100 chassis has been installed, the media con verter slide-in- modules ma y be connected to the network.
22 CPSMC08xx-100 PointSystem ™ Chassis network mgmt. 24 hour T echnical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 5 Netw ork Management T he CPSMM100 firmware and the F ocalPoint™ application are described in the Foc alPoint™ 2.
23 CPSMC08xx-100 PointSystem ™ Chassis network mgmt. 24 hour T echnical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 DB-9 Serial Port T he DB-9 serial port allows the network administr ator to configure and manage the CPSMC08xx-100 chassis using the SNMP Command-Line Interface (CLI) at an attached terminal or terminal emulator .
24 CPSMC08xx-100 PointSystem ™ Chassis troubleshooting 6 T r oubleshooting 1. Are ANY of the POWER LEDs on an y of the slide-in-modules illuminated; AND/OR are the fans oper ating? YES • T he chassis is recei ving power . Proceed to the next step.
25 CPSMC08xx-100 PointSystem ™ Chassis 24 hour T echnical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T echnical Specifications F or use with T ransition Networks Model CPSMC08xx-100 or equiv alent. Dimensions 17 x 10.4 x 1.8 inches (432 x 264 x 46 mm) Shipping W eight 8 lbs.
26 CPSMC08xx-100 PointSystem ™ Chassis 24 hour T echnical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Cable Specifications Null Modem Cable T he Null Modem Cable is used for connecting a terminal or terminal emulator to the management module’ s DB-9 connector to access the command-line interface.
27 CPSMC08xx-100 PointSystem ™ Chassis CO AX Cable Coaxial cable media is used for circuits suc h as DS3, E1 and 10Base-2 Ethernet. T he impedance of the coaxial cable is determined by the interface type, for example: • 75 ohm for DS3. • 50 ohm for 10Base-2 Ethernet.
28 CPSMC08xx-100 PointSystem ™ Chassis Contact Us Technical Support T echnical support is a vailable 24 hours a da y . United States: 1-800-260-1312 International: 00-1-952-941-7600 Transition Now Chat liv e via the W eb with a T ransition Networks T echnical Support Specialist.
29 CPSMC08xx-100 PointSystem ™ Chassis W arr anty Limited Lifetime Warranty Effectiv e for products shipped May 1, 1999 and after . Every T ransition Networks' labeled product purc hased after May 1, 1999 will be free from defects in material and workmanship for its lifetime.
30 CPSMC08xx-100 PointSystem ™ Chassis Before making any non-w arranty repair , T ransition Networks requires a $200.00 charge plus actual shipping costs to and from the customer . If the repair is greater than $200.00, an estimate is issued to the customer for authorization of repair .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Transition Networks CPSMC0800-100 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Transition Networks CPSMC0800-100 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Transition Networks CPSMC0800-100, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Transition Networks CPSMC0800-100 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Transition Networks CPSMC0800-100, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Transition Networks CPSMC0800-100.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Transition Networks CPSMC0800-100. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Transition Networks CPSMC0800-100 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
