Manuel d'utilisation / d'entretien du produit TL-SL3226P du fabricant TP-Link
Aller à la page of 22
Rev 1.0 E-mail: export@tp-link.com.cn User's Guide User's Guide TL-SL3226P TL-SL3226P 24+2G Gigabit Switch Managed 24+2G Gigabit Managed Switch.
T able of contents Checklist...............................................................................................1 Chapter 1 About this User's Guide...................................................1 1.1 Usage..........................
4.2 How to connect TELNET ...........................................................12 4.3 How to connect Out-of-Band.....................................................13 4.4 The interface and operating way of TELNET/Out-of-Band........14 4.4.1 Configure System.
Checklist Open the box and carefully unpack the TL-SL3226P . You should have all the items on the following checklist: ! One TL-SL3226P Switch ! One AC power cable ! One Serial cable ! One User's.
! Support static priority and IEEE802.1p class of service with 2-level priority mode ! Support Static MAC address management and MAC address Binding ! Provide the configuration function of port securi.
3.1.3 Power On The TL-SL3226P can be used with the power source in the range of 1 10 to 260VAC, 50 to 60Hz. The internal power system of the TL-SL3226P can automatically adjust the operating power-pressure according to the power-pressure input. The POWER LED will be light when power on.
3.2 Connecting the Switch 3.2.1 Front Panel There are 2 extension module slots, 24 10/100Mbps ports, one console (RS232) port and LED indicators on the front panel of the TL-SL3226P . Module Slot The module slots can connect 100M/1000M module card and GBIC card.
supports the power cord. Plug-in the female connector of the provided power cord into this socket, and the male side of the cord into a power outlet. Supported input voltage range from 110 to 260V AC at 50-60Hz. The port for connection to the ground There is a port on the left of the panel for the connection to the ground.
! The TL-SL3226P can start to work with the correct power supply. Please confirm whether the power supply is accordant to the requirements of the TL-SL3226P . ! In order to avoid the risk of the power-attach, don't open the shelf of the TL-SL3226P when it works.
4.3 How to connect Out-of-Band Out-of-Band Management needs a terminal or a HyperT erminal. First, connect the Switch's console port with the PC's console port by the console cord. Then, run HyperT erminal. Refer to the following figure to configure the HyperT erminal.
The management interface is the menu drive. After you log on, you will in the first menu as following: I llumination: System Configuration includes system information such as software/hardware version, module information, switch parameter such as broadcast storm filter mode, file transmission, save and reset.
The assumpsit of normal control button in the operating interface is as following: <Arrow Key>= Direction Button: up, down, left, right moves cursor <Tab> =T ab Button: move the cursor to .
! ! Switch Parameters 1) Assigned Managed Port: can be any port or all ports from P1 to P26. Only the workstation connecting to the Assigned Managed Port in the Switch can manage the Switch. The default is All ports. 2) Broadcast Strom Filtering Mode: have six choices: 5%, 10%, 15%, 20%, and 25%.
the IEEE802.1X protocol of Port 2 has been configured to be Enable. Please note Port Security, T runk and IEEE802.1X protocol are mutually exclusive. In other word, when you configure one of them, other two can't be configured. State The port can be used when the State is Enable, while the port is prohibited when the State is Disable.
10HD: 10Mbps, Half-Duplex 10FD: 10Mbps, Full-Duplex 100HD: 100Mbps, Half-Duplex 100FD: 100Mbps, Full-Duplex 1000HD: 1000Mbps, Half-Duplex 1000FD: 1000Mbps, Full-Duplex Default VID There is this choice only in the IEEE802.1Q T ag VLAN mode. Every port on the Switch has a Default VID which is the VID for an Untag T ag received by the port.
is too short however, many entries may be aged out too soon. This will result in a high percentage of received packets whose source addresses cannot be found in the forwarding table, in which case the switch will broadcast the packet to all ports, egating many of the benefits of having a switch.
T able. Static MAC Address Filter MAC Address Force UNAUTH MAC Address Authorized MAC Address 2) No matter which port the MAC Address of the Force UNAUTH MAC T able relates to, the Switch won't transfer its' packets.
2) When you configure a Trunk, the ports added to the T runk will be deleted from all VLANs no matter whether you create a Trunk or add the port to a Trunk. If you delete any port or delete the whole T runk, the original port in the Trunk can't reset to any VLAN.
Please choose Automatically , then press OK. The Third step: Choose Security User-defined. The Forth Step: Choose Enable in the Active Scripting or choose Reset to Medium , press Reset and press OK. The Fifth step: Press the right button of the mouse, choose Propertiesin the menu existed.
5.2.2 Connection We propose the IP address of the Switch is 192.168.0.2, you can input http://192.168.0.2/ in the IE to connect the Switch. Then press Enter , the following screen will exist. Input the user's name and password (the default user's name and password are supervisor.
Cross Cable The Switch (normal port) connects to the switch/hub/other equipments (normal port). Usually, the Straight Cable is required to connect to the switch (Uplink Port) or NIC. The following Figure shows the facture of the Straight Cable and the Cross Cable.
IEEE802.1x Prot ocol Port Configuration State Disable (all ports) Force AUTH MAC Table N/A Force UNAUTH MAC N/A T able VLAN Management VLAN Mode IEEE802.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté TP-Link TL-SL3226P c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du TP-Link TL-SL3226P - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation TP-Link TL-SL3226P, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le TP-Link TL-SL3226P va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le TP-Link TL-SL3226P, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du TP-Link TL-SL3226P.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le TP-Link TL-SL3226P. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei TP-Link TL-SL3226P ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
