Manuel d'utilisation / d'entretien du produit TL-R402M du fabricant TP-Link
Aller à la page of 56
.
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders.
FCC STATEMENT This equipment has been tested and found to comp ly with the limits for a class B digital device, pursuant to part 15 of the FCC Rule s. These limits are designed to provide reasonable protection against harmful inte rference in a residential installation.
COMMENT Package cont ents .......................................................................................... 1 Chapter 1. About this Guide ........................................................................ 2 1.1 Purpos es................
iv 5.7.4 MAC Filter ing .................................................................................................... 34 5.7.5 Remote Man agement ....................................................................................... 35 5.7.6 Ping from WAN .
TL-R402M Cable/DSL Router User Guide -1- Package contents The following contents should be found in your box: ¾ One TL-R402M Cable/DSL Router ¾ One AC power Adapter for TL-R402M Cable/DSL Router ¾ .
TL-R402M Cable/DSL Router User Guide 2 Chapter 1. About this Guide Thank you for choosing the TL-R402M Cable/ DSL Router. This router provides dedicated solutions for Small Office/Home Office (SOHO) net works. With your network all connected, your local network can share Internet access, file s and fun for multiple PCs through one ISP account.
TL-R402M Cable/DSL Router User Guide 3 Chapter 2. Introduction 2.1 Overview of the Router The TL-R402M Cable /DSL Router integ rates a 4-p o r t s wi tc h , firewall, and NAT-router. Its design is dedicated to Sma ll Office/Home Office (SOHO) netw ork solution s.
TL-R402M Cable/DSL Router User Guide 4 2.3 Panel Layout 2.3.1 The Front Panel The front panel of the TL-R402M c onsists of several LED indicators , which is designed to indicat e connections. 2.3.2 The LEDs describes the LEDs on the front panel of the router.
TL-R402M Cable/DSL Router User Guide 5 Note: Ensure the router is powered on before it restarts completely. ¾ WAN RJ45 port for connecting the router to a cable, DSL modem or Ethernet ¾ Four LAN 10/.
TL-R402M Cable/DSL Router User Guide 6 Chapter 3. Connecting the Router 3.1 System Requirement s ¾ Broadband Internet Access Service (DSL/Cable/Ethernet) ¾ One DSL/Cable modem that has an RJ45 conne.
TL-R402M Cable/DSL Router User Guide 7 Figure 3-1 Hardware Installation of the TL-R402M Cable/DSL R outer.
TL-R402M Cable/DSL Router User Guide Chapter 4. Quick Installation Guide After connecting the TL-R402M router into your network, you should confi gure it. This chapter describes how to configure t he basic functions of your TL -R402M Cable/DSL Router.
TL-R402M Cable/DSL Router User Guide 9 Figure 4-2 Failed result of Ping command If the result displayed is similar to what shown in Figure 4-2 it means that your PC has not connected to the router.
TL-R402M Cable/DSL Router User Guide 10 Figure 4-4 Login Windows Note: If the above screen does not prompt, it means that your web-browser has been set to a proxy. G o to Tools menu>Internet Options>Connections>LAN Settings , in the screen that appears, cancel the Using Pro xy checkbox, and click OK to finish it.
TL-R402M Cable/DSL Router User Guide 11 Figure 4-6 Choose WAN Connection Type The router supports three popular ways to connect to Internet. Please select one compatible with your ISP, click Next to enter the necessary network parameters.
TL-R402M Cable/DSL Router User Guide 12 ¾ Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.255.255.0 ¾ Default Gateway - Enter the gateway into the box if required ¾ .
TL-R402M Cable/DSL Router User Guide 13 Chapter 5. Configuring the Router This chapter describes each web page's key functions. 5.1 Login After your successful login, you can configur e and manage the router. There are eight main menus on the left of the web-bas ed utility.
TL-R402M Cable/DSL Router User Guide 14 Figure 5-1 Router Status 5.3 Quick Setup Please refer to Section 4.2: "Quick Installation Guide." 5.4 Network - Network y LAN y WAN y MAC Clone Figure 5-2 The Network menu There are three submenus under the Network me nu (shown in Figure 5-2 ): LAN , WAN and MAC Clone.
TL-R402M Cable/DSL Router User Guide 15 Figure 5-3 LAN ¾ MAC Address - The physical address of the router, as seen from the LAN. The value can't be changed ¾ IP Address - Enter the IP address of your router in dotted-decimal notation (factory default: 192.
TL-R402M Cable/DSL Router User Guide 16 Figure 5-4 WAN - Dynamic IP This page displays the WAN IP parameters assigned dynamically by your ISP, including IP address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP parameters from your ISP.
TL-R402M Cable/DSL Router User Guide 17 Figure 5-5 WAN - Static IP You should type the following paramet ers into the spaces provided: ¾ IP Address - Enter the IP address in dotted-decimal notation provided by your ISP ¾ Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.
TL-R402M Cable/DSL Router User Guide 18 ¾ Connect on Demand - You can configure the router to disconnect your Internet connection after a specified peri od of inactivity ( Max Idle Time ).
TL-R402M Cable/DSL Router User Guide 19 Figure 5-7 PPPoE Advanced Settings ¾ Packet MTU - The default MTU size is 1492 bytes, whic h is usually fine. For some ISPs, you need modify the MTU.
TL-R402M Cable/DSL Router User Guide 20 Figure 5-8 WAN – L2TP For more details, please refer to your ISP. ¾ User Name /Passw ord - Enter the User Name and Password provided by your ISP.
TL-R402M Cable/DSL Router User Guide 21 Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before yo.
TL-R402M Cable/DSL Router User Guide 22 5.5 DHCP - DHCP y DHCP settings y DHCP Clients List y Address Reservation Figure 5-10 the DHCP menu There are three submenus unde r the DHCP menu (shown in Figure 5 -10 ): DHCP Settings , DHCP Clients List and Address Reservation.
TL-R402M Cable/DSL Router User Guide 23 ¾ Default Gateway - (Optional.) Suggest to input the IP address of the LAN port of the router, default value is 192.168.1.1 ¾ Default Domain - (Optional.) Input the domai n name of your network ¾ Primary DNS - (Optional.
TL-R402M Cable/DSL Router User Guide 24 Figure 5-13 Address Reservation ¾ MAC Address - The MAC address of the PC of whic h you want to reserve IP address ¾ Assigned IP Address - The IP address of the router reserved To Reserve IP addresses: 1. Enter the MAC address (The format for t he MAC address is XX-XX-XX-XX-XX-XX.
TL-R402M Cable/DSL Router User Guide 25 5.6 Forwarding - Forwarding y Virtual Servers y Port Triggering y DMZ y UPnP Figure 5-14 the Forwarding menu There are four submenus under the Forwarding menu (shown in Figure 5 -14 ): Virtual Servers , Port Triggering , DMZ and UPnP .
TL-R402M Cable/DSL Router User Guide 26 To setup a virtual server entry: 1. Select the service you w ant to use from the Common Service Port list, select the ID you want to use, and click the Copy to button.
TL-R402M Cable/DSL Router User Guide 27 Figure 5-16 Port Triggering Once configured, operation is as follows: 1. A local host makes an outgoing connection us ing a destination port number defined in th e Trigger Port field.
TL-R402M Cable/DSL Router User Guide 28 There are many popular applications in the Popular Application list. You can select it and the ID, then click the Copy to button, the application will fill in the Trigger Port , incoming Ports Range boxes and select the Enable checkbox.
TL-R402M Cable/DSL Router User Guide 29 5.6.4 UPnP The Universal Plug and Play (UPnP) feature allows the devices, such as Internet computers, to access the local host resources or devices as needed. UPnP devices can be automatically discovered by the UPnP service applic ation on the LAN.
TL-R402M Cable/DSL Router User Guide 30 5.7.1 Firewall Using the Firewall page (shown in Figure 5-20 ), you can turn the general firewall switch on or off. The default setting for the switch is off. If the general firewall switch is o ff, even if IP Address Filtering, DNS Filtering and MA C Filtering are enabled, thei r settings are ineffective.
TL-R402M Cable/DSL Router User Guide 31 Figure 5-21 IP Address Filtering To disable the IP Address Filteri ng feature, keep the default setting, Disabled . To set up an IP Address Filtering entry, click Enable Firewall and Enable IP Address Filtering on the Firewall page, and click the Add New… button.
TL-R402M Cable/DSL Router User Guide 32 8 Click the Save button to save this entry. To add additional entries, repeat steps 1-8. When finished, click the Return button to return to IP Address Filtering page. T o modify or delete an existing entry: 1. Find the desired ent ry in the table.
TL-R402M Cable/DSL Router User Guide 33 Figure 5-23 Domain Filtering Before adding a Domain Filtering entry, you must ensure that Enable Firewall and Enable Domain Filtering have been selected on the Fire wa ll page. To Add a Domain filtering entry, click the Add New… button.
TL-R402M Cable/DSL Router User Guide 34 if you want to block the PCs on your LAN from accessing websites www.xxyy.com.cn , www.aabbcc.com and websites with .net at the end on the Internet while no limit for other websites. First, enable the Firewall and Domain Filtering on the Firewall page, then, specify the following Domain filtering list: 5.
TL-R402M Cable/DSL Router User Guide 35 address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0E-AE-B0-00-0B. 2. Type the description of the PC in the Description field. Fox example: John’s PC. 3. Status - Select Enabled or Disabled for this entry on the Status pull-down list.
TL-R402M Cable/DSL Router User Guide 36 entering that number in the box pro vided. Choose a number b etween 1024 and 65534, but do not use the number of any common service port ¾ Remote Management IP Address - This is the current address you will use when accessing your router from the Internet.
TL-R402M Cable/DSL Router User Guide 37 1. Enter the following data: ¾ Destination IP Address - The Destination IP Address is the address of the network or host that you want to assign to a static ro.
TL-R402M Cable/DSL Router User Guide 38 Figure 5-31 Firmware Upgrade New firmware versi ons are posted at www.tp-link.com and can be downloaded for free. If the router is not experiencing difficult ies, there is no need to download a more recent firmware version, unless the version has a new f eature that you want to use.
TL-R402M Cable/DSL Router User Guide 39 ¾ The default User Name : admin ¾ The default Password : admin ¾ The default IP Address : 192.168.1.1 ¾ The default Subnet Mask : 255.255.255.0 Note : Any settings you have saved will be lost when the default settings are restored.
TL-R402M Cable/DSL Router User Guide 40 It is strongly recommended that you change the fa ctory default user name and passwor d of the router. All users who try to access the router's web-based utility will be pr ompted for the router's user name and password.
TL-R402M Cable/DSL Router User Guide Appendix A: FAQ 1. How do I configure the router to access Internet by ADSL users? 1) First, configure the ADSL modem configured in RFC1483 bridg e model. 2) Connect the Ethernet cable from your ADSL modem to the WAN port on the router.
TL-R402M Cable/DSL Router User Guide 42 MAC address will fill in the "WAN MAC Addre ss" field. Or else, type the MAC address into the "WAN MAC Address" field. The format for the MAC address is XX-XX-XX-XX-XX-XX. Then click the "Save" butto n.
TL-R402M Cable/DSL Router User Guide 43 Figure 5 DMZ 4. I want to build a WEB Server on the LAN, what should I do? 1) Because the WEB Server port 80 will inte rfere with the WEB management port 80 on the router, you must change the WEB management port number to avoid interference.
TL-R402M Cable/DSL Router User Guide Appendix B: Configuring the PCs In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows 95/98. First make sure your Ethernet Adapter is work ing, refer to the adapter’s manual if needed.
TL-R402M Cable/DSL Router User Guide 45 Figure 10 Configuration tab 3) Click on Properties . The following TCP/IP Properties window will display and the IP Address tab is open on this window by default.
TL-R402M Cable/DSL Router User Guide 46 Figure 12 Gateway tab 3 Chose Disable DNS on the DNS configuration tab, as s hown in the following figure: Figure 13 DNS Configuration tab Setting IP address manually 1 Select Specify an IP address on IP Address tab, as shown in the following figure.
TL-R402M Cable/DSL Router User Guide 47 Figure 14 IP Address tab 2 Type the router’s LAN IP address (the default IP is 192.168.1.1) into the New gateway field on the Gateway tab, and click on the Ad.
TL-R402M Cable/DSL Router User Guide 48 Figure 16 DNS Configuration tab Now: All the configurations ar e finished; it will take effect after reboot..
TL-R402M Cable/DSL Router User Guide 49 Appendix C: Specifications General Standards IEEE 802.3, IEEE 802.3u Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT Ports One 10/100M Auto-Negotiati on WAN RJ45 port.
TL-R402M Cable/DSL Router User Guide 50 Appendix D: Glossary ¾ DDNS ( D yn amic D omain N ame S ystem) - The capability of assi gning a fixed host and domain name to a dynamic Internet IP address.
TL-R402M Cable/DSL Router User Guide 51 Appendix E: Contact Information For help with the installation or operation of the TP-LINK TL-R402M Cable/DSL Router, pleas e contact us.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté TP-Link TL-R402M c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du TP-Link TL-R402M - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation TP-Link TL-R402M, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le TP-Link TL-R402M va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le TP-Link TL-R402M, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du TP-Link TL-R402M.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le TP-Link TL-R402M. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei TP-Link TL-R402M ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
