Manuel d'utilisation / d'entretien du produit TL-MR3020 du fabricant TP-Link
Aller à la page of 258
TL-MR3020 Port able 3G/4G Wireless N Router Rev: 1.1.2 1910010551.
COPYRIGHT & TRADEMARKS S pecifications ar e subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of t heir respective holders.
FCC ST A TEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pr otection against harmful interference in a residential inst allation.
CE Mark W arning This is a class B product. In a domestic environm ent, this product may cause r adio interference, in which case the user may be required to take adequate measures. Canadian Compliance St atement This device complies with Industry Canada lic ense-exempt RSS standard(s).
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行； 經發現有干擾現象時， 應立 即停用，並改善至無干擾時方得繼續使用。前項合法.
TP-LINK TECHNOLOGIES CO., L TD DECLARA TION OF CONFORMITY For the following equipment: Product Description: Portable 3G/4G Wireless N Router Model No.: TL-MR3020 T rademark: TP-LINK We declare under o.
CONTENTS Package Co ntents ............................................................................................................... ........... 1 Chapter 1. Introducti on..........................................................................
4.5.4 MAC Cl one ..................................................................................................... 51 4.5.5 LAN................................................................................................................. 51 4.6 Wirele ss .
4.15 Dynamic DNS ............................................................................................................. 97 4.15.1 Comexe.c n DDNS .......................................................................................... 97 4.15.
5.8.3 DMZ .............................................................................................................. 148 5.8.4 UPnP ............................................................................................................ 149 5.
Chapter 6. Router Configurat ion—AP Mode........................................................................... 189 6.1 Login .......................................................................................................................
TL-MR3020 Port able 3G/4G Wireless N Router Package Contents The following items should be found in your package: ¾ Portable 3G/4G Wireless N Router TL-MR3020 ¾ Power Adapter for Portable 3G/4G Wire.
TL-MR3020 Port able 3G/4G Wireless N Router Chapter 1. Introduction 1.1 Overview of the Router TP-LINK understands the need for sharing the 3G/4G connection on the go and so we’v e realized the conv.
TL-MR3020 Port able 3G/4G Wireless N Router 1.3 Main Features ¾ T ravel size design, small enough to take on the road ¾ One 10/100M Auto-Negotiation RJ45 Ethernet port , one USB 2.0 Port,one mini USB port ¾ Compatible with IEEE 802.1 1n/g/b, IEEE802.
TL-MR3020 Port able 3G/4G Wireless N Router 1.4 Panel Layout 1.4.1 The Front Panel Figure 1-1 Front Panel sketch The Router ’s LEDs are located on the fr ont panel (V iew from top to bottom). Name Statu s Indication On Power is on. Power Off Power is of f.
TL-MR3020 Port able 3G/4G Wireless N Router 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch The following parts are lo cated on the rear panel (V iew from left to right). ¾ 3G/4G USB Port: This port is used to plug a 3G/4G modem/card. ¾ Mini USB Port: This port is used to connect the provided power adapter .
TL-MR3020 Port able 3G/4G Wireless N Router Chapter 2. Connecting the Router 2.1 System Requirement s ¾ 3G/4G Mobile Broadband Internet Access Service (With a L TE /HSP A+ /HSUP A /HSDP A /UMTS /EVDO.
TL-MR3020 Port able 3G/4G Wireless N Router 1. Switch the mode of the R outer on 3G/4G Router mode. 2. Connect the notebook/PC to the Ethern et port of TL-MR3020 Router with an Ethernet cable. 3. Connect the 3G/4G modem/card to the 3G/4G USB port of the Router .
TL-MR3020 Port able 3G/4G Wireless N Router c. AP Mode In AP mode, the Router will act as a wireless access point supporting f our modes, Access Point mode, Repeater mode, Bridge with AP mode and Client mo de. Pleas e connect the Router according to your desired mode.
TL-MR3020 Port able 3G/4G Wireless N Router d) Client Mode In this mode, the Router will act as a wi reless card to connect with wireless network. -9-.
TL-MR3020 Port able 3G/4G Wireless N Router Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic func tions of your Portable 3G/4G Wireless N Router using Quick Setup Wiz ard within minutes. 3.1 3G/4G Router Mode The default IP address of the Portable 3G/4 G Wireless N Router is 192.
TL-MR3020 Port able 3G/4G Wireless N Router 2. After a moment, a login window will appear , similar to the Figure 3-2 . Enter admin for the User Name and Password, both in lower case letters.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 3-4 Quick Setup 5. Choose the Internet Access type, and then click Next . Here we take 3G/4G Only for example. Figure 3-5 Quick Setup – Internet Access ¾ 3G/4G Only (Recommended) - Only use 3G/4G as the access to the Internet.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 3-6 Quick Setup – 3G/4G 7. Set your wir eless parameters. It’ s reco mmended that you edit the following two items, and then click Next . 1) Create a unique and easy-to-remember Wireless Network Name .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 3-8 Quick Setup – Finish ) Note: After the rebooting, please reconn ect to the network according to 3.1.2 Connect to Network . If Wireless Security is enabled, you need to enter the password you’ve just set to succe ssfully finish the connecting.
TL-MR3020 Port able 3G/4G Wireless N Router 3. When Connected appea rs, you’ve successfully co nnected to the wireless network. 3.2.3 Router Configuration 1. T o access the configuration utility , o pen a web-browser and type the default address http://192.
TL-MR3020 Port able 3G/4G Wireless N Router 4. Choose your W AN Conn ection type and click Next to continue. Figure 3-12 Quick Setup – W AN Connection T ype ¾ If the connection type is PPPoE , the next screen will appear as shown in Figure 3-13 .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 3-14 Quick Setup – MAC Clone z If you are visiting the Router from the main computer, please select Yes , and then click Clone MAC Address .
TL-MR3020 Port able 3G/4G Wireless N Router z IP Address - This is the WAN IP address seen by external users on the Internet (including your ISP). Enter t he IP address into the field. z Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.
TL-MR3020 Port able 3G/4G Wireless N Router ) Note: After the rebooting, please reconn ect to the network according to 3.2.2 Connect to Network . If Wireless Security is enabled, you need to enter the password you’ve just set to succe ssfully finish the connecting.
TL-MR3020 Port able 3G/4G Wireless N Router 2. After a moment, a login window will appear , similar to the Figure 3-20 . Enter admin for the User Name and Password, both in lower case letters.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 3-22 Quick Setup – Wireless Operation Mode ¾ If you choose Access Point (AP) , the next screen will appear as shown in Figure 3-23 . This operation mode allows wireless stations to access. Figure 3-23 Quick Setup – AP z Wireless Network Name (SSID) - Enter a string of up to 32 characters.
TL-MR3020 Port able 3G/4G Wireless N Router z Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the Router can be used. It may be illegal to use the wireless function of the Router in a region other than one of those specified in this filed.
TL-MR3020 Port able 3G/4G Wireless N Router z Region - This field determines which operating frequency will be used. To achieve more information, you can read t he same glossary in Access Point part. ¾ If you choose Bridge with AP , the next screen will appear as shown in Figure 3 -25 .
TL-MR3020 Port able 3G/4G Wireless N Router ¾ If you choose Client , the next screen will appear as shown in Figure 3-26 . This operation mode allows your device to work as a wir eless station and enable wired host(s) to access AP . Figure 3-26 Quick Setup – Client z None - The wireless security function c an be enabled or disabled.
TL-MR3020 Port able 3G/4G Wireless N Router Key Type - You can select the WEP key length ( 64-bit , or 128-bit , or 152-bit .) for encryption. “ Disabled " means this WEP key entry is invalid.
TL-MR3020 Port able 3G/4G Wireless N Router configuration , and then reconnect to the network according to 3.3.2 Connect to Network . If Wireless Security is enabled, you need to enter the password you’ve just set to succe ssfully finish the connecting.
TL-MR3020 Port able 3G/4G Wireless N Router Chapter 4. Router Configuration-3G/4G Router Mode This chapter will show each Web p age's key functions and the configuration way on 3G/4G Router Mode. 4.1 Login After your successful login, you will see the main menus on th e left of the Web-based utility .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-1 Router S tatus 4.3 Quick Setup Please refer to Chapter 3: "Quick Installation Guide." 4.4 WPS This section will guide you add a new wireless device to an existing network quickly b y WPS (Wi-Fi Protected Setup) function.
TL-MR3020 Port able 3G/4G Wireless N Router a). Choose menu “ WPS ”, and you will see the next screen (shown in Figure 4-2 ). Figure 4-2 WPS ¾ WPS St atus - Enable or disable the WPS function here. ¾ Current PIN - The current value of the Router's PIN displayed here.
TL-MR3020 Port able 3G/4G Wireless N Router Step 2: Press and hold the WPS button of t he adapter directly for 2 or 3 seconds. Step 3: W ait for a w hile until the next screen appears.
TL-MR3020 Port able 3G/4G Wireless N Router Method T w o: Step 1: Press the WPS/RESET bu tton on the front panel of the Router for less than 5 seconds. Step 2: For the confi guration of the wirele ss adapter , plea se choose Push the button on my access point in the configuration utility of t he WPS as below , and click Next .
TL-MR3020 Port able 3G/4G Wireless N Router The WPS Configuration Screen of Wireless Adapter Method Three: Step 1. Keep the default WPS S tatus as Enabled and click the Add device button in Figure 4-2 , then the following screen will appear . Figure 4-3 Add A New Device Step 2.
TL-MR3020 Port able 3G/4G Wireless N Router Step 4. W ait for a while until the next screen appears. Click Fin ish to complete the WPS configuration. The WPS Configuration Screen of Wireless Adapter II. By PIN If the new device supports Wi-Fi Protected Se tup and the PIN method, you can add it to the network by PIN with the following two methods.
TL-MR3020 Port able 3G/4G Wireless N Router The WPS Configuration Screen of Wireless Adapter ) Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Method T w o: Enter the PIN from my Router Step 1: Get the Current PIN code of the Router in Figure 4-2 (each Router has its u nique PIN code.
TL-MR3020 Port able 3G/4G Wireless N Router ) Note: The default PIN code of the Router can be found in its label or the WPS configuration screen as Figure 4-2 . c). Y ou will see the following screen when t he new device successfully connected to the network.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-5 Internet Access Mode ¾ 3G/4G Only (Recommended) In this mode, the router will try 3G/4G access only. WAN access is disabled. ¾ 3G/4G Preferred In this mode, the router will try 3G/4G access first.
TL-MR3020 Port able 3G/4G Wireless N Router 4.5.2 3G/4G Choose menu “ Network → 3G/4G ”, you can configure paramete rs for 3G/4G function on the scre en below . T o use the 3G/4G function, you should first insert yo ur USB modem on the USB port of the Router .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-7 Figure 4-8 ¾ Location - Please select the location where you're enjoying the 3G/4G card. ¾ Mobile ISP - Please select the ISP (Internet Serv ice Provider) you apply to for 3G/4G service. The router will show the defau lt Dial Number and APN of that ISP.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-9 Figure 4-10 ¾ Connect on Demand - You can configure the Router to disconnect your Internet connection after a specif ied period of the Internet connectivity ( Max Idle Time ).
TL-MR3020 Port able 3G/4G Wireless N Router ) Note: Sometimes the connection cannot be disconnec ted althoug h you s pecify a time to Max Idle Time because some applications visit the In ternet continually in the background. ¾ Connect Automatically - Connect automatically after the Router is disconnected.
TL-MR3020 Port able 3G/4G Wireless N Router 1. Download a most recent 3G/4G USB mode m configura tion file from our website ( http://www .tp-link.com ).
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-13 W AN - Dynamic IP This page displays the W AN IP parameters a ssigned dynamically by your ISP , including IP address, Subnet Mask, Default Gateway , etc. Click the Renew button to renew the IP parameters from your ISP .
TL-MR3020 Port able 3G/4G Wireless N Router 2. If your ISP p rovides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting, select Static IP . The Static IP settings page will appear, shown in Figure 4-14 . Figure 4-14 W AN - S tatic IP ¾ IP Address - Enter the IP address in dotted-decimal not ation provided by your ISP .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-15 W AN - PPPoE ¾ User Name/Passw ord - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Secondary Connection - It’s available only for PPPoE Connec tion.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Time-based Connecting - The connection will only be est ab lished in the period from the start time to the end time (both are in HH:MM format). ) Note: Only when you have confi gured the system time on System Tools -> Time page, will the Time-based Connecting function can take effect.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Detect Online Interval - The Router will detect Access Concentrator online at every interval. The default value is “0”. Y ou can i nput the value betwe en “0”and “120”. The value “0” means no detect.
TL-MR3020 Port able 3G/4G Wireless N Router e.g. NSW / ACT - ns w .bigpond.net.au VIC / T AS / W A / SA / NT - vic.bigpo nd.net.au QLD - qld.bigpond.net.au ¾ MTU Size - The normal MTU (Maximum T ransmission Unit) value for most Ethernet networks is 1500 Bytes.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-18 L2TP Settings ¾ User Name/Passw ord - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Dynamic IP/ S t atic IP - Choose either as you are given by your ISP .
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Connect Manually - Y ou can configure the Router to make it connect or disconnect manually . After a specified period of inactivity ( Max Idle T ime ), t.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Dynamic IP/ S t atic IP - Choose either as you are given by your ISP and enter the ISP’ s IP address or the domain name. If you choose static IP and enter the dom ain name, you should also enter the D NS assigned by your ISP .
TL-MR3020 Port able 3G/4G Wireless N Router The Router can not detect PPTP /L2TP/BigPond connections with yo u r ISP. If your ISP uses one of these protocols, then you must configure your connection manually.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-21 LAN ¾ MAC Address - The physical address of the Router , as see n from the LAN. The value can't be changed. ¾ IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation (factory default: 192.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-23 Wireless Settings ¾ Wireless Network Name - Enter a value of up t o 32 c haracters. The same name of Wireless Network Name must be assigned to all wireless devices in your network.
TL-MR3020 Port able 3G/4G Wireless N Router 11n only - Select if all of your wireless clients are 802.11n. 11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients. 11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ WEP Index - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).It indicates the index of the WEP key. ¾ Auth Ty pe - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).
TL-MR3020 Port able 3G/4G Wireless N Router ¾ WP A/WP A2 – Personal (Recommended) - It’s the WPA/WPA2 authentication type based on pre-shared passphrase. • Ve r s i o n - you can choose the vers ion of the WPA-PSK security on the drop-down list.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-26 • Radius Server IP - Enter the IP address of the Radius Server. • Radius Port - Enter the port that radius service used. • Radius Password - Enter the password for the Radius Server. • Group Key Up date Period - Specify the group key update in terval in seconds.
TL-MR3020 Port able 3G/4G Wireless N Router • WEP Key- Select which of the four keys w ill be use d and enter the matching WEP key that you create. Make sure these values ar e identical on all wireless stations in your network. • Key Typ e - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.
TL-MR3020 Port able 3G/4G Wireless N Router To Add a Wireless MAC Address filtering entry, click the Add Ne w… button. The " Add or Modify Wireless MAC Address Filtering entry " page will .
TL-MR3020 Port able 3G/4G Wireless N Router 1. Click the Enable button to enable this function. 2. Select the radio button: Allo w the stations specified by any enabled entries in the list to access for Filtering Rules. 3. Delete all or disable all entries if there are any entries already.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet is larger than the specified RTS Threshold size, the router will send RTS frames to a particular receiving station and negotiate the sending of a data frame.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ MAC Address - The connected wireless station's MAC address ¾ Current Status - The connected wireless statio n's running status, one of STA-AUT.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-33 DHCP Settings ¾ DHCP Server - Enable or Disable the DHCP server . If you disable the Serve r , you must have another DHCP server within your network or else you must configure the computer manually .
TL-MR3020 Port able 3G/4G Wireless N Router 4.7.2 DHCP Clients List Choose menu “ DHCP → DHCP Clients List ”, you can view the info rmation about the clients attached to the Router in the next screen (shown in Figure 4-34 ) .
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Status - The status of this entry either Enabled or Disabled . To Reserve IP addresses: 1. Click the Add New … button. (Pop-up Figure 4-36 ) 2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address in dotted-decimal notation of the computer you wish to add.
TL-MR3020 Port able 3G/4G Wireless N Router 4.8.1 Virtual Servers Choose menu “ Forwarding → Virtual Servers ”, you can view and add virtual servers in the next screen (shown in Figure 4-38 ). Virtual servers can be us ed for setting up public services on your LAN, such as DNS, Email and FTP.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-39 Add or Modify a Virtual Server Entry ) Note : If your computer or server has more than one type of available service, please select another service, and enter the same IP Addr ess for that computer or server .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-40 Port T riggering Once the Router is configured, the operation is as follows: 1. A local host makes an outgoing connection us ing a destination port number defined in the T rigger Port field.
TL-MR3020 Port able 3G/4G Wireless N Router 6. Click the Save button to save the new rule. Figure 4-41 Add or Modify a T riggering Entry T o modify or delete an existing entry: 1. Click the Modify in the entry you want to modify . If you want to delete the entry , click the Delete .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-42 DMZ T o assign a computer or server to be a DMZ server: 1. Click the Enable radio button 2. Enter the local host IP Address in the DMZ Host IP Address field 3. Click the Save button. ) Note : After you set the DMZ host, the firewa ll related to the host will not work.
TL-MR3020 Port able 3G/4G Wireless N Router z App Description - The description provided by the application in the UPnP request z External Port - External port, which the router opened for the application. z Protocol - Shows which type of protocol is opened.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Firewall - A firewall protects your network from the outside world. Here yo u can enable or disable the Router’s firewall. z SPI Fire wall - SPI (Stateful Packet Inspection, also known as dynamic packet filtering) helps to prevent cyber attacks by tracking mo re state per session.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-46 Advanced Security ¾ Packets Statistics Interval (5~60) - The default value is 10. Se lect a value between 5 and 60 seconds from the drop-down list. The Pa ckets S tatistics Interval value indicates the time section of the packe ts st atistics.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond th e set value, the Router will startup the blocking function immediately.
TL-MR3020 Port able 3G/4G Wireless N Router After click the Add button, your PC's MAC Addre ss will be placed in the list above. Click the Save button to save your settings.
TL-MR3020 Port able 3G/4G Wireless N Router 4.10 Parent al Control Choose menu “ Parent al Control ”, and you can configure the par ent al control in the screen as shown in Figure 4-49 .
TL-MR3020 Port able 3G/4G Wireless N Router 4. Enter the allowed domain name of the website, either the full name or the keywords (e.g. google) in the Allowed Domain Name field. Any domain name with keywords in it ( www.google.com , www.google.com.hk ) will be allowed.
TL-MR3020 Port able 3G/4G Wireless N Router 1. Click “ Parental Control ” menu on the left to enter the Parental Control Settings page. Check Enable and enter the MAC address 00- 11-22-33-44-BB in the MAC Address of Parental PC field. 2. Click “ Access Control → Schedule ” on the left to enter t he Schedule Settings page.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-53 Access Control Rule Management ¾ Enable Internet Access Control - Select the check box to enable the Internet Access Control function, so the Default Filter Policy can take effect. ¾ Rule Name - Here displays the name of the rule and this name is unique.
TL-MR3020 Port able 3G/4G Wireless N Router There are two methods to add a new rule. Method One: 1. Click Setup Wizard button and the next screen will appear as shown in Figure 4-54 . Figure 4-54 Quick Setup – Create a Host Entry ¾ Host Description - In this field, create a unique description for the host (e.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-55 Quick Setup – Create an Access T arget Entry ¾ Target Description - In this field, create a description for the target. Note that this description should be unique (e.g. Target_1). ¾ Mode - Here are two options, IP Address and Domain Name.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-56 Quick Setup – Create an Advanced Schedule Entry ¾ Schedule Description - In this field, create a descr iption for the schedule. Note that this description should be unique (e.g. Schedule_1). ¾ Day - Choose Select Days and select the ce rtain day (days), or choose Everyday.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Rule - In this field, create a name for the rule. Note that this name should be unique (e.g. Rule_1). ¾ Host - In this field, select a host from the drop-down list for the rule. The default value is the Host Description you set just now.
TL-MR3020 Port able 3G/4G Wireless N Router 1. Click the submenu Rule of Access Control in the left to return to the Rule List page. Select Enable Internet Access Control and c hoose "Allow the packets specified by any enabled access control policy to pass through the Router".
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Modify - To modify or delete an existing entry. To add a new entry, please follow the steps below. 1. Click the Add New… button. 2. In the Mode field, select IP Address or MAC Address. z If you select IP Addre ss, the screen shown is Figure 4-60 .
TL-MR3020 Port able 3G/4G Wireless N Router 3. In Host Description field, create a unique description for the host (e.g. Host_1). 4. In MAC Address field, enter 00-11 -22-33-44-AA. 5. Click Save to complete the settings. Then you will go back to the Host Se ttings page and see the following list.
TL-MR3020 Port able 3G/4G Wireless N Router 2) In Domain Name field, enter the domain name, either the full name or the keywords (for example google) in the bl ank. Any domain name with keywords in it ( www.google.com , www.google.hk ) will be blocked or allowed.
TL-MR3020 Port able 3G/4G Wireless N Router 2. In Mode field, select Domain Name from the drop-down list. 3. In Target Description field, create a unique descri ption fo r the target (e.g. Target_1). 4. In Domain Name field, enter www.google.com. 5. Click Save to complete the settings.
TL-MR3020 Port able 3G/4G Wireless N Router Click the Next button to go to the next page, or click the Previous button return to the previous page. Figure 4-66 Advanced Schedule Settings For example : If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA to access www.
TL-MR3020 Port able 3G/4G Wireless N Router There are two submenus under the Adv anced Ro uting menu as shown in Figure 4-67 : Stat ic Routing List and System Routing T able . Click any of them, and you will be able to configure the corresponding function.
TL-MR3020 Port able 3G/4G Wireless N Router 4. Click the Save button to make the entry take ef fect. Other configurations for the entries: Click the Delete button to delete the entry . Click the Enable All button to enable all the entries. Click the Disable All button to disable all the entries.
TL-MR3020 Port able 3G/4G Wireless N Router There are two submenus under the Bandw idth Control menu as shown in Fig ure 4-71 : Control Settings and Rules List . Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below .
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Egress bandwidth - This field displays the max and mix upload bandwidth through the W AN port. The default is 0. ¾ Ingress bandwidth - This field displays the max and mix download bandwidth through the W AN port.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-76 Binding Settings ¾ MAC Address - The MAC address of the controll ed computer in the LAN. ¾ IP Address - The assigned IP address of the cont rolled computer in the LAN. ¾ Bind - Check this option to enable ARP binding for a specific device.
TL-MR3020 Port able 3G/4G Wireless N Router 2. Enter the MAC Address or IP Address. 3. Click the Find button in the page as shown in Figure 4-78 . Figure 4-78 Find IP & MAC Binding Ent ry Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries.
TL-MR3020 Port able 3G/4G Wireless N Router Click the Bind All button to bind all the current items, available after enable. Click the Load All button to load all items to the IP & MAC Bind ing list.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-80 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the Domain Name received from your dynamic DNS service provider . 2. T ype the User Name for your DDNS account. 3. T ype the Passw ord for your DDNS account.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-81 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the User Name for your DDNS account. 2. T ype the Passw ord for your DDNS account. 3. T ype the Domain Name you received from dynamic DNS service provi der here.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-82 No-ip.com DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the User Name for your DDNS account. 2. T ype the Passw ord for your DDNS account. 3. T ype the Domain Name you received from dynamic DNS service provider .
TL-MR3020 Port able 3G/4G Wireless N Router Password, System Log and St atistics. Click any of them, and you will be able to configure the corresponding function.
TL-MR3020 Port able 3G/4G Wireless N Router T o set time manually: 1. Select your local time zone. 2. Enter the Date in Month/Day/Y ear format. 3. Enter the Tim e in Hour/Minute/Second format. 4. Click Save . T o set time automatically: 1. Select your local time zone.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-86 Diagnostic T ools ¾ Diagnostic T ool - Check the radio button to select one diagnostic too. z Ping - This diagnostic tool troubleshoots connecti vity , reachability , and name resolution to a given host or gateway .
TL-MR3020 Port able 3G/4G Wireless N Router Click St ar t to check the connectivity of the Internet. The Diagnostic Result s page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of t he Internet is fine.
TL-MR3020 Port able 3G/4G Wireless N Router ) Note: 1) New firmware vers ions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware unle ss the new firmware has a new feature you want to use.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-90 Backup & Restore Configuration ¾ Click the Backup button to save all configuration setti ngs as a backup file in your local computer . ¾ T o upgrade the Router's configurat ion, follow these instructions.
TL-MR3020 Port able 3G/4G Wireless N Router 4.16.7 Passw ord Choose menu “ System T ools → Password ”, you can change the fa ctory default user name and password of the Router in the next screen as shown in Figure 4-92 .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 4-93 System Log ¾ Log Type - By selecting the log type, only logs of this type will be shown. ¾ Log Level - By selecting the log level, only logs of this level will be shown. ¾ Refresh - Refresh the page to show the latest log list.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ St andard AP - In this mode, the device enables multiu sers to access, and provides several wireless modes, such as AP , Client, Repeater and so on. ¾ 3G/4G Router - In this mode, the device enables multiusers to share Internet via ADSL/Cable Modem.
TL-MR3020 Port able 3G/4G Wireless N Router Click Delete All to delete all entries in the table. Statistics Table: IP/MAC Address The IP and MAC address are displayed with related statistics. Packets The total number of packets received and transmitted by the Router.
TL-MR3020 Port able 3G/4G Wireless N Router Chapter 5. Router Configuration—WISP Mode This chapter will show each W eb pa ge's ke y functions and the conf iguration way on WISP Mode. 5.1 Login After your successful login, you will see the main menus on th e left of the Web-based utility .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-1 Router S tatus 5.3 Quick Setup Please refer to Chapter 3: "Quick Installation Guide." 5.4 WPS This section will guide you to add a new wire less device to an existing network quickly by WPS (Wi-Fi Protected Setup) function.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-2 WPS ¾ WPS St atus - Enable or disable the WPS function here. ¾ Current PIN - The current value of the Router's PIN displayed here. The default PIN of the Router can be found in the label or User Guide.
TL-MR3020 Port able 3G/4G Wireless N Router Method One: Step 1. Press the WPS/RESET button on the front panel of the Router for less than 5 seconds. Step 2. Press and hold the WPS button of t he adapter directly for 2 or 3 seconds. Step 3. W ait for a while until the next screen appears.
TL-MR3020 Port able 3G/4G Wireless N Router Method T w o: Step 4. Press the WPS/RESET button on the front panel of the Router for less than 5 seconds. Step 5. For the confi guration of the wirele ss adapter , please choose Push the button on my access point in the configuration utility of the WPS as below , and click Next .
TL-MR3020 Port able 3G/4G Wireless N Router The WPS Configuration Screen of Wireless Adapter Method Three: Step 1. Keep the defaul t WPS S tatus as Enabled and click the Add device button in Figure 4-2 , then the following screen will appear . Figure 5-3 Add A New Device Step 2.
TL-MR3020 Port able 3G/4G Wireless N Router The WPS Configuration Screen of Wireless Adapter II. By PIN If the new device supports Wi-Fi Protected Se tup and the PIN method, you can add it to the network by PIN with the following two methods. Method One: Enter the PIN into my Router Step 1.
TL-MR3020 Port able 3G/4G Wireless N Router The WPS Configuration Screen of Wireless Adapter ) Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Method T w o: Enter the PIN from my Router Step 1. Get the Current PI N code of the Router in Figure 5-2 (each Router has its unique PIN code.
TL-MR3020 Port able 3G/4G Wireless N Router Step 3. Y ou will see the following screen when t he new device successfully connected to the network. ) Note: 1) The status LED on the Router will light green all the time if the device has been successfully added to the network.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-5 W AN - Dynamic IP This page displays the W AN IP parameters a ssigned dynamically by your ISP , including IP address, Subnet Mask, Default Gateway , etc. Click the Renew button to renew the IP parameters from your ISP .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-6 W AN - S tatic IP ¾ IP Address - Enter the IP address in dotted-decimal not ation provided by your ISP . ¾ Subnet Mask - Enter the subnet Mask provided by your ISP in dotted-decimal notation. Usually , the Sub Mask is 255.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-7 W AN - PPPoE ¾ User Name/Passw ord - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Confirm Password - Re-enter the Password provided by you r ISP to ensure the Password you entered is correct.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Connect Automatically - The connection can be re-establis hed automatically when it was down. ¾ Time-based Connecting - The connection will only be est ablished in the period from the start time to the end time (both are in HH:MM format).
TL-MR3020 Port able 3G/4G Wireless N Router ¾ ISP S pecified IP Address - If your ISP does not a utomatically assign IP addresses to the Router during login, please click “ Use IP address specified by ISP ” check box and enter the IP address provided by your ISP in dotted-decimal notation.
TL-MR3020 Port able 3G/4G Wireless N Router e.g. NSW / ACT - ns w .bigpond.net.au VIC / T AS / W A / SA / NT - vic.bigpo nd.net.au QLD - qld.bigpond.net.au ¾ MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-10 W AN –L2TP ¾ User Name/Passw ord - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Dynamic IP/ S t atic IP - Choose either as you are given by your ISP .
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Connect Manually - Y ou can conf igure the Router to make it connect or disconnect manually . After a specified period of inactivity ( Max Idle T ime ), .
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Dynamic IP/ St atic IP - Choose either as you are given by your ISP and enter the ISP’ s IP address or the domain name. If you choose static IP and enter the dom ain name, you should also enter the D NS assigned by your ISP .
TL-MR3020 Port able 3G/4G Wireless N Router The Router can not detect PPTP /L2TP/BigPond connections with yo u r ISP. If your ISP uses one of these protocols, then you must configure your connection manually.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-13 LAN ¾ MAC Address - The physical address of the Router , as see n from the LAN. The value can't be changed. ¾ IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation (factory default: 192.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-15 Wireless Settings ¾ SSID - The SSID of the AP your Router is going to connect to as a cli ent. Y ou can also use the search function to select the SSID to j oin. ¾ BSSID - The BSSID of the AP your Router is going to connect to as a client.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Enable Wireless Router Radio - The wireless radio of the Router can be enabled or disabled to allow wireless stations access. If enabled, the wireless station s will be able to access the Router . Otherwise, wireless stati ons will not be able to access the Router .
TL-MR3020 Port able 3G/4G Wireless N Router ) Note: If you know the SSID of the desired AP , you can al so input it into the field "SSID" manually .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-18 ¾ Disable Security - If you do not want to use wireless secu rity, se lect this check box, but it’s strongly recommended to choose one of t he following modes to enable security.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-19 • PSK Password - You can enter ASCII characters bet ween 8 and 63 characters or 8 to 64 Hexadecimal characters. • Group Key Up date Period - Specify the group key update in terval in seconds.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ WEP - It is based on the IEEE 802. 11 standard. If you select this check box, you will find a notice in red as show in Figure 5-21 . Figure 5-21 • Typ e - you can choose the type for the WEP se curity on the pull-down list.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-22 Wireless MAC addre ss Filtering T o filter wireless users by MAC Address, click Ena ble . The default setting is Disable . ¾ MAC Address - The wireless station's MAC address that you want to filter .
TL-MR3020 Port able 3G/4G Wireless N Router 4. Click the Save button to save this entry . T o modify or delete an existing entry: 1. Click the Modify in the entry you want to modify . If you want to delete the entry , click the Delete . 2. Modify the information.
TL-MR3020 Port able 3G/4G Wireless N Router 5.6.4 Wireless Advanced Choose menu “ Wir el ess → Wireless Advanced ”, and then you can c onfigure the advanced settings of your wireless network. Figure 5-24 Wireless Advanced ¾ Beacon Interval - Enter a value between 40-1000 m illiseconds for Beacon Interval here.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Enable WMM - WMM function can guarantee the packets with high- priority messages being transmitted preferentially. It is strongly recommended ena bled. ¾ Enable Short GI - This function is recommended for it will increase the data capacity by reducing the guard interval time .
TL-MR3020 Port able 3G/4G Wireless N Router 5.7 DHCP Figure 5-26 The DHCP m enu There are three submenus under the DHCP menu (shown in Figure 5-26 ): DHCP Settings , DHCP Client s List and Address Reserva tion. Click any of them, and you will be able to configure the corre sponding function.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Address Lease Time - The Address Lease Time is the amount of ti me a network user will be allowed connection to the Router with their current dynamic IP Address. Enter the amount of time in minutes and the user will be "l e ased" this dynamic IP Address.
TL-MR3020 Port able 3G/4G Wireless N Router 5.7.3 Address Reservation Choose menu “ DHCP → Address Reserva tion ”, and then you can view and add a r eserved address for clients via the next screen (shown in Figure 5-29 ).
TL-MR3020 Port able 3G/4G Wireless N Router Click the Enable/ Disable All button to make all entries enabled/disabled Click the Delete All button to delete all entries Click the Next button to go to the next page and click the Previous button to return to the previous page.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Internal Port - The Internal Service Port number of the PC running the service application. Y ou can leave it blank if the Internal Port is the same as the Service Port , or enter a specific port number when Service Port is a single one.
TL-MR3020 Port able 3G/4G Wireless N Router To modify or delete an existing entry: 1. Find the desired entry in the table. 2. Click Modify or Delete as desired on the Modify column. Click the Enable/ Disable All button to make all entries enabled/ disabled.
TL-MR3020 Port able 3G/4G Wireless N Router 5. Select Enable in Stat us field. 6. Click the Save button to save the new rule. Figure 5-35 Add or Modify a T riggering Entry ¾ T rigger Port - The port for outgoing traffic. An outgoing connection usi ng this port will trigger this rule.
TL-MR3020 Port able 3G/4G Wireless N Router Once the Router is configured, the operation is as follows: 1. A local host makes an outgoing connection to an external host using a destination port number defined in the T rigger Port field.
TL-MR3020 Port able 3G/4G Wireless N Router 5.8.4 UPnP Choose menu “ Forwarding → UPnP ”, and then you can view the information about UPnP in the screen (shown in Figure 5-37 ). The Universal Plug and Play (UPnP) feature allows the devices, such as Internet computers, to acce ss the local host resources or devices as needed.
TL-MR3020 Port able 3G/4G Wireless N Router 5.9 Security Figure 5-38 The Security menu There are four submenus under t he Security menu as shown in Figure 5-38 : Basic Security , Advanced Security , Local Management and Remote Management. Click any of them, and you will be able to configur e the corresponding function.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using VPN protocols to pass through the Router. • PPTP Passthrough - Point-to-Point Tunneling Protocol (PPTP) allows the Point-to-Point Protocol (PPP) to be tu nneled through an IP network.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-40 Advanced Security ¾ Packets Statistics Interval (5~60) - The default value is 10. Se lect a value between 5 and 60 seconds from the drop-down list. The Pa ckets S tatistics Interval value indicates the time section of the packe ts st atistics.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ UDP-FLOOD Packets Threshold (5~3600) - The default value is 500. Enter a val ue between 5 ~ 3600. When the current U PD-FLOOD Packe ts number is beyond the set value, the Router will startup the bl ocking function immediately.
TL-MR3020 Port able 3G/4G Wireless N Router access the Setup page of the R outer's Web-Based Utility locally from inside the network, check the radio button “ Only the PCs listed can browse the built-in web pages to perform Administrator tasks ”, and then enter each MAC Address in a separate field.
TL-MR3020 Port able 3G/4G Wireless N Router used is 8080, please enter http ://202.96.12.8:8080 in your browser. Later, you may be asked for the Router's password. After successfu lly entering the username and password, you will be able to access the Router's web-based utility.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-44 Add or Modify Parental Co ntrol Entry ¾ Parental Control - Check Enable if you want this function to take effect ; otherwise, check Disable . ¾ MAC Address of Parental PC - In this field, enter the MAC address of the controlling PC, or you can make use of the Copy To Above button below.
TL-MR3020 Port able 3G/4G Wireless N Router 4. Enter the allowed domain name of the website, either the full name or the keywords (e.g. google) in the Allowed Domain Name field. Any domain name with keywords in it ( www.google.com , www.google.com.cn ) will be allowed.
TL-MR3020 Port able 3G/4G Wireless N Router 5.11 Access Control Figure 5-46 Access Control There are four submenus under the A ccess Control menu as shown in Figure 5-46 : Rule , Host , Ta r g e t and Schedule . Click any of them, and you will be able to configure the corresponding function.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Enable - Here displays the status of the rule, enabled or not. Check this option to enable a specific entry. ¾ Modify - Here you can edit or delete an existing rule. ¾ Setup Wizard - Click the Setup Wizard button to create a new rule entry.
TL-MR3020 Port able 3G/4G Wireless N Router 2. Click Next when finishing creating the host entry, and the next screen will appear as shown in Figure 5-49 . Figure 5-49 Quick Setup – Create an Access T arget Entry ¾ Target Description - In this field, create a description for the target.
TL-MR3020 Port able 3G/4G Wireless N Router 3. Click Next when finishing creating the access ta rget entry, and the next screen will appear as shown in Figure 4-51 . Figure 5-50 Quick Setup – Create an Advanced Schedule Entry ¾ Schedule Description - In this field, create a descr iption for the schedule.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Rule - In this field, create a name for the rule. Note that this name should be unique (e.g. Rule_1). ¾ Host - In this field, select a host from the drop-down list for the rule. The default value is the Host Description you set just now.
TL-MR3020 Port able 3G/4G Wireless N Router 1. Click the submenu Rule of Acces s Control in the left to return to the Rule List page. Select Enable Internet Access Control and choose "A llow the packets specified by any enabled access control policy to pass through the Router".
TL-MR3020 Port able 3G/4G Wireless N Router To add a new entry, please follow the steps below. 1. Click the Add New… button. 2. In the Mode field, select IP Address or MAC Address. z If you select IP Addre ss, the screen shown is Figure 5-54 . 1) In Host Description field, create a unique description for the host (e.
TL-MR3020 Port able 3G/4G Wireless N Router 5. Click Save to complete the settings. Then you will go back to the Host Se ttings page and see the following list. 5.11.3 Target Choose menu “ Access Control → Ta r g e t ”, you can view and set a T ar get list in the screen as shown in Figure 5-56 .
TL-MR3020 Port able 3G/4G Wireless N Router 3. Click the Save button. Click the Delete All button to delete all the entries in the table. Click the Next button to go to the next page, or click the Previous button return to the previous page.
TL-MR3020 Port able 3G/4G Wireless N Router Then you will go back to the Target Settings page and see the following list. 5.11.4 Schedule Choose menu “ Access Control → Schedule ”, you can view and set a Schedule list in the next screen as shown in Figure 5-59 .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-60 Advanced Schedule Settings For example : If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18: 00 to 20:00 on Saturday and Sunday , you should first follow the settings below: 1.
TL-MR3020 Port able 3G/4G Wireless N Router 5.12.1 Static Routing List Choose menu “ Advanced Routing → St atic Routing List ”, and then you c an configure the static route in the next screen (shown in Figure 5-62 ). A static route is a pre-determined path that network information must travel to reach a specific host or network.
TL-MR3020 Port able 3G/4G Wireless N Router Click the Delete button to delete the entry . Click the Enable All button to enable all the entries. Click the Disable All button to disable all the entries. Click the Delete All button to delete all the entries.
TL-MR3020 Port able 3G/4G Wireless N Router There are two submenus under the Bandw idth Control menu as shown in Figure 5- 65 : Control Settings and Rules List . Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below .
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Egress bandwidth - This field displays the max and mix upload bandwidth through the W AN port, the default is 0 . ¾ Ingress bandwidth - This field displays the max and mix download bandwidth through the W AN port, the default is 0 .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-70 Binding Setting ¾ MAC Address - The MAC address of the controll ed computer in the LAN. ¾ IP Address - The assigned IP address of the cont rolled computer in the LAN. ¾ Bind - Check this option to enable ARP binding for a specific device.
TL-MR3020 Port able 3G/4G Wireless N Router 1. Click the Find button as shown in Figure 5-70 . 2. Enter the MAC Address or IP Address. 3. Click the Find button in the page as shown in Figure 5-72 . Figure 5-72 Find IP & MAC Binding Ent ry Click the Enable All button to make all entries enabled.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Delete - Delete the item. Click the Bind All button to bind all the current items, available after enable. Click the Load All button to load all items to the IP & MAC Bind ing list. Click the Refresh button to refresh all items.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-74 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: 1. Enter the Domain Name your dynamic DNS service provider gave. 2. Enter the User Name for your DDNS account. 3. Enter the Password for your DDNS account.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-75 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. Enter the User Name for your DDNS account. 2. Enter the Password for your DDNS account. 3. Enter the Domain Name you received from dynamic DNS service provider .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-76 No-ip.com DDNS Settings To set up for DDNS, follow these instructions: 1. Enter the User Name for your DDNS account. 2. Enter the Password for your DDNS account. 3. Enter the Domain Name you received from dynamic DNS service provider .
TL-MR3020 Port able 3G/4G Wireless N Router Choose menu “ System T ools ”, and you can see the s ubmenus under the main menu: Ti m e Settings , Diagnostic , Firmware Upgrade , Factory Default s, Backup & Restore, Reboot, Password, System Log and St atistics.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ End - The time to end the Daylight Saving. Select the month in the first field, the week in the second field, the day in the third field and the time in the last field. ¾ Daylight Saving St atus - Displays the status whether t he Daylight Saving is in use.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-80 Diagnostic T ools ¾ Diagnostic T ool - Check the radio but ton to select one diagnostic too. ¾ Ping - This diagnostic tool troubleshoots connecti vity , reachability , and name resolution to a given host or gateway .
TL-MR3020 Port able 3G/4G Wireless N Router The Diagnostic Result s page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of t he Internet is fine. Figure 5-81 Diagnostic Results ) Note: 1) Only one user can use the diagnostic tools at one time.
TL-MR3020 Port able 3G/4G Wireless N Router ) Note: 1) New firmware vers ions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware unless the new firmware has a new feature you want to use.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-84 Backup & Restore Configuration ¾ Click the Backup button to save all configuration setti ngs as a backup file in your local computer . ¾ T o upgrade the Router's configurat ion, follow these instructions.
TL-MR3020 Port able 3G/4G Wireless N Router 5.16.7 Passw ord Choose menu “ System T ools → Password ”, and then you can chang e the factory default user name and password of the Router in the next screen as shown in Figure 5-86 .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 5-87 System Log ¾ Log Type - By selecting the log type, only logs of this type will be shown. ¾ Log Level - By selecting the log level, only logs of this level will be shown. ¾ Refresh - Refresh the page to show the latest log list.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ St andard AP - In this mode, the device enables multiu sers to access, and provides several wireless modes, such as AP , Client, Repeater and so on. ¾ 3G/4G Router - In this mode, the device enables multiusers to share Internet via ADSL/Cable Modem.
TL-MR3020 Port able 3G/4G Wireless N Router Click the Refresh button to refresh immediately. Click Reset All to reset the values of all the entries to zero. Click Delete All to delete all entries in the table. Statistics Table: IP/MAC A ddress The IP and MAC addr ess are displayed with related statistics.
TL-MR3020 Port able 3G/4G Wireless N Router Chapter 6. Router Configuration—AP Mode This chapter will show each Web p age's key f unctions and the configurat ion way on AP Mode.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 6-1 Device S tatus ¾ Firmware Version - This field displays the current firmware ver sion of the AP.
TL-MR3020 Port able 3G/4G Wireless N Router 6.3 Quick Setup Please refer to Chapter 3: "Quick Installation Guide." 6.4 WPS WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network. This section will guide you to add a new wireless devic e to an existing network quickly by function.
TL-MR3020 Port able 3G/4G Wireless N Router T o add a new device: If the wireless adapter supports Wi-Fi Protecte d Setup (WPS), you can establish a wireless connection between wireless adapter and device using either Push Button Configuration (PBC) method or PIN method.
TL-MR3020 Port able 3G/4G Wireless N Router The WPS Configuration Screen of Wireless Adapter Method T w o: Step 1: Press the WPS/RESET bu tton on the front panel of the Router for less than 5 seconds.
TL-MR3020 Port able 3G/4G Wireless N Router The WPS Configuration Screen of Wireless Adapter Step 3: Wait for a w hile until the next screen appears. Click Finish t o c o m p l e t e t h e W P S configuration.
TL-MR3020 Port able 3G/4G Wireless N Router Method Three: Step 1. Keep the defaul t WPS S tatus as Enabled and click the Add device button in Figure 4-2 , then the following screen will appear . Figure 6-3 Add A New Device Step 2. Choose Press the button of the new device in two minutes and click Connect .
TL-MR3020 Port able 3G/4G Wireless N Router The WPS Configuration Screen of Wireless Adapter II. By PIN If the new device supports Wi-Fi Protected Se tup and the PIN method, you can add it to the network by PIN with the following two methods.
TL-MR3020 Port able 3G/4G Wireless N Router The WPS Configuration Screen of Wireless Adapter ) Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Method T w o: Enter the PIN from my AP Step 1: Get the Current PIN code of the AP in Figure 6-2 (each AP has its unique PIN code.
TL-MR3020 Port able 3G/4G Wireless N Router ) Note: The default PIN code of the AP can be found in its label or t he WPS configuration screen as Figure 6-2 . Y ou will see the following screen when the new device has successfully connected to the network.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 6-5 LAN ¾ MAC Address - The physical address of the AP . The value can't be changed. ¾ Ty p e - Select Dyna mic IP to get IP address from DHCP server or select St at ic IP to configure IP address manually from the drop-down list.
TL-MR3020 Port able 3G/4G Wireless N Router Click any of them, and you will be able to conf igure the corresponding function. The detailed explanations for each submenu are provide d below .
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Region - Select your region from the pull-down lis t. This field specifies the region where the wireless function of the device can be used. It may be illegal to use the wireless function of the device in a region other than one of those specified in th is field.
TL-MR3020 Port able 3G/4G Wireless N Router ) Note: To apply any settings you have alte red on the pag e, please click the Save button, and then you will be reminded to reboot the device. 2) Client: This mode allows the device to act as a wireless station to enable wired host(s) to access an AP.
TL-MR3020 Port able 3G/4G Wireless N Router Note Dialog ) Note: Limited by local law regulations, version fo r North America does not have region selection option. ¾ Channel Width - Determines the channel width to be used. It is unnecessary to change the default value unless required.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 6-9 Wireless Settings in Repeater mode ¾ MAC of AP - Enter the MAC address of the root AP of which you wa nt to expand wireless range. ¾ Region - Select your region from the pull-down lis t. This field specifies the region where the wireless function of the device can be used.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Max Tx Rate - Specifies the maximum transmit rate of the device through this field. ¾ Enable Wireless Radio - Select or deselect this check box to allow or deny wireless stations to access the device. Click the Survey button to detect the SSIDs in the local area.
TL-MR3020 Port able 3G/4G Wireless N Router country or region is not listed, please contact your local government agency for assistance. When you select your local region from the pull- down list, click the Save button , then the Note Dialog appears. Click OK .
TL-MR3020 Port able 3G/4G Wireless N Router Click the Survey button to detect the SSIDs in the local area. ) Note: To apply any settings you have alte red on the pag e, please click the Save button, and then you will be reminded to reboot the device. 6.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Disable Security - Check this box radio button to disable wireless security . If disabled, the wireless stations will be able to connect this device without encrypt ion. It is strongly recommended that you choose one of the security types to enable security .
TL-MR3020 Port able 3G/4G Wireless N Router • WEP Key Format - Y ou can select ASCII or Hexadecimal format. ASCII format stands for any combination of keyboard characters in the specified length. Hexadecimal format stands for any combination of hexadecimal digi ts (0-9, a-f, A-F) in the specified length.
TL-MR3020 Port able 3G/4G Wireless N Router 2) Client Figure 6-12 Wireless Security – Client ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disable wireless security . If disabled, the wireless stations will be able to connect this device without encrypt ion.
TL-MR3020 Port able 3G/4G Wireless N Router • Ty p e - Y ou can select one of following types. 1) Automatic - Select Shared Key or Open System authentication ty pe automatically based on the wireless station's capability and request. 2) Shared Key - Select 802.
TL-MR3020 Port able 3G/4G Wireless N Router 3) Repeater Figure 6-13 Wireless Security – Repea ter ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disable wireless security . If disabled, the wireless stations will be able to connect this device without encrypt ion.
TL-MR3020 Port able 3G/4G Wireless N Router • Ty p e - Y ou can select one of following types. 1) Automatic - Select Shared Key or Open System authentication ty pe automatically based on the wireless station's capability and request. 2) Shared Key - Select 802.
TL-MR3020 Port able 3G/4G Wireless N Router 4) Bridge with AP Figure 6-14 Wireless Security – Bridge with AP ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disable wireless security . If disabled, the wireless stations will be able to connect this device without encrypt ion.
TL-MR3020 Port able 3G/4G Wireless N Router • Key T ype - Y ou can select the WEP key length ( 64-bit , or 128-bit , or 152-bit .) for encryption. "Disabled" means th is WEP key entry is invalid.
TL-MR3020 Port able 3G/4G Wireless N Router The Wireless MAC Address Filtering feature allo ws you to control wireless stations accessing the device, which depend on t he station's MAC addresses. ¾ Operation Mode - Shows the current operation mode.
TL-MR3020 Port able 3G/4G Wireless N Router 4. Click the Save button to save this entry . T o add additional entries, repeat steps 1-4. T o modify or delete an existing entry: 1. Click the Modify in the entry you want to modify . If you want to delete the entry , click the Delete .
TL-MR3020 Port able 3G/4G Wireless N Router 6.6.4 Wireless Advanced Selecting Wireless > Wireless Advanced will allow you to do some advanced settings for the device in the following screen shown in Figure 6-17 . As the configurat ion for each operatio n mode is almost the same, we take Access Point mode for example here.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ Enable AP Isolation - Isolates all connected wireless stat ions so that wireless stations cannot access each other through WLAN.
TL-MR3020 Port able 3G/4G Wireless N Router management and allows new wireless devices to r e ceive IP addresses automatically without the need to manually assign new IP addresses. There are three submenus under the DHCP menu (shown as Figure 6-19 ): DHCP Settings , DHCP Client s List and Address Reservation .
TL-MR3020 Port able 3G/4G Wireless N Router ¾ End IP Address - This field specifies the last address in the IP Address pool. 192.168.0.199 is the defau lt end IP address. ¾ Address Lease Time - Enter the amount of time for the PC to connect to the AP with its current assigned dynamic IP address.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ MAC Address - Here displays the MAC address of the DHCP client. ¾ Assigned IP - Here displays the IP address that the AP has allocated to the DHCP client. ¾ Lease Time - Here displays the time of the DHCP cli ent leased.
TL-MR3020 Port able 3G/4G Wireless N Router Click Next to go to the next page and Click Previous to return the previous page. ) Note: The changes won't take effect until the device reboots. 6.8 System T ools System T ools option helps you to optimiz e the configuration of y our device.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 6-24 T ime settings ¾ Time Zone - Select your local time zone from this pull down list. ¾ Date - Enter your local date in MM/ DD/YY into the right blanks. ¾ Tim e - Enter your local time in HH/MM/SS into the right blanks.
TL-MR3020 Port able 3G/4G Wireless N Router T o set time automatically: 1. Select your local time zone. 2. Enter the address or domain of the NTP Server I or NTP Server II . 3. Click the Get GMT button to get system time from In ternet if you have connected to the Internet.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 6-26 Diagnostic T ools ¾ Diagnostic T ool - Check the radio but ton to select one diagnostic too. ¾ Ping - This diagnostic tool troubleshoots connecti vity , reachability , and name resolution to a given host or gateway .
TL-MR3020 Port able 3G/4G Wireless N Router The Diagnostic Result s page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of t he Internet is fine. Figure 6-27 Diagnostic Results ) Note: 1) Only one user can use the diagnostic tools at one time.
TL-MR3020 Port able 3G/4G Wireless N Router ) Note: 1) New firmware vers ions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware unless the new firmware has a new feature you want to use.
TL-MR3020 Port able 3G/4G Wireless N Router Figure 6-30 Backup & Restore Configuration ¾ Click the Backup button to save all configuration setti ngs as a backup file in your local computer . ¾ T o upgrade the Router's configurat ion, follow these instructions.
TL-MR3020 Port able 3G/4G Wireless N Router 6.8.7 Password Choose menu “ System T ools → Password ”, and then you can chang e the factory default user name and password of the Router in the next screen as shown in Figure 6-32 .
TL-MR3020 Port able 3G/4G Wireless N Router Figure 6-33 System Log ¾ Log Type - By selecting the log type, only logs of this type will be shown. ¾ Log Level - By selecting the log level, only logs of this level will be shown. ¾ Refresh - Refresh the page to show the latest log list.
TL-MR3020 Port able 3G/4G Wireless N Router ¾ St andard AP - In this mode, the device enables multiu sers to access, and provides several wireless modes, such as AP , Client, Repeater and so on. ¾ 3G/4G Router - In this mode, the device enables multiusers to share Internet via ADSL/Cable Modem.
TL-MR3020 Port able 3G/4G Wireless N Router Click the Refresh button to refresh immediately. Click Reset All to reset the values of all the entries to zero. Click Delete All to delete all entries in the table. Statistics Table: IP/MAC A ddress The IP and MAC address are displa yed with related statistics.
TL-MR3020 Port able 3G/4G Wireless N Router Appendix A: FAQ 1. How do I configure the Router to access Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Conn ect the Ethernet cable from your ADSL Modem to the W AN port on the Router .
TL-MR3020 Port able 3G/4G Wireless N Router 2. How do I configure the Router to access Internet by Ethernet users? 1) Login to the Router , click the “Network” menu on the left of your browser , and click "W AN" submenu. On the W AN page, select “Dynamic IP” for "W AN Connection T ype", finish by clicking “Save”.
TL-MR3020 Port able 3G/4G Wireless N Router Figure A-4 Virtual Serve rs Figure A-5 Add or Modify a Virtual server Entry ) Note: Your opposite side should call your WAN IP , which is displayed on the “Status” page.
TL-MR3020 Port able 3G/4G Wireless N Router 5) How to enable H323 ALG: Log in to the Router , click the “ Security ” menu on the left of your browser , and click “ Basic Securit y ” submenu. On the “ Basic Security ” page, check the Enable radio button next to H323 ALG .
TL-MR3020 Port able 3G/4G Wireless N Router ) Note: If the above configuration takes effect, to configure to the Router by typing http://192.168.0.254:88 (the Router’s LAN IP address: W eb Management Port) in the address field of the Web browser.
TL-MR3020 Port able 3G/4G Wireless N Router 4) If the wireless connection is ready , but you can’t access the Router , check the IP Address of your wireless stations.
TL-MR3020 Port able 3G/4G Wireless N Router Appendix B: Configuring the PCs In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP . First make sure your Ethernet Adapter is wo rking, refer to the adapter ’s manual if needed.
TL-MR3020 Port able 3G/4G Wireless N Router Figure B-0-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default.
TL-MR3020 Port able 3G/4G Wireless N Router Figure B-0-3 ¾ Setting IP address manually 1 Select Use the following IP address radio button, and the following items are available. If the Router's LAN IP address is 192.168.0.254, type 192.16 8.0.x (x is from 1 to 253) into th e IP address field and 255.
TL-MR3020 Port able 3G/4G Wireless N Router Figure B-0-4 Now click OK to keep your settings. -242-.
TL-MR3020 Port able 3G/4G Wireless N Router Appendix C: Specifications General S tandards IEEE 802.3, 802.3u, 802.1 1b, 802.1 1g and 802.1 1n Protocols TCP/IP , PPPoE, DHCP , ICMP , NA T , SNTP Ports .
TL-MR3020 Port able 3G/4G Wireless N Router Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standar ds by adding MIMO (multiple-input multiple-output).
TL-MR3020 Port able 3G/4G Wireless N Router ¾ SSID - A S ervice S et Id entification is a thirty-two char acter (maximum) alphanumeri c key identifying a wireless local area network. Fo r the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID.
TL-MR3020 Port able 3G/4G Wireless N Router Appendix E: Compatible 3G/4G USB Modem The UMTS/HSP A/EVDO USB modems we’ve tested in the field are listed below .
TL-MR3020 Port able 3G/4G Wireless N Router E-TOUCH WM78 GLBETRTTER GI0452 HAIER CE100, OLIVE VME110, WM200 HSDC Hsdc-03 MWALKER MBD-100HU MYWAVE FW2012T OPTION iCon 401 PANTECH PX500 QISDA H21 SIERRA.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté TP-Link TL-MR3020 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du TP-Link TL-MR3020 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation TP-Link TL-MR3020, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le TP-Link TL-MR3020 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le TP-Link TL-MR3020, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du TP-Link TL-MR3020.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le TP-Link TL-MR3020. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei TP-Link TL-MR3020 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
