Manuel d'utilisation / d'entretien du produit TD-W8960N du fabricant TP-Link
Aller à la page of 105
TD-W8960N Wireless N ADSL2+ Modem Router Rev: 1.0.0 1910010174.
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other br ands and product names are trad emarks or registered trademarks of t heir respective holders.
FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CE Mark Warning This is a class B product. In a domestic environmen t, this product may cause radio interference, in which case the user may be required to take adequate measure s.
TP-LINK TECHNOLOGIES CO., LTD TP-LINK TECHNOLOGIES CO., LTD. South Building, No.5 Keyuan Road, Central Zone, Science & Technology Park, Nanshan, Shenzhen, P. R. China DECLARA TION OF CONFORMITY For the following equipment: Product Description: Wireless N ADSL2+ Modem Router Model No.
CONTENTS Package Cont ents .................................................................................................... 1 Chapter 1. Product Over view ................................................................................... 2 1.1 Overview of the Router .
4.4.13 Dns Proxy...................................................................................................................... ..... 53 4.4.14 Interface Groupi ng ................................................................................
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Package Contents The following contents should be found in your package: ¾ One TD-W8960N Wireless N ADSL2+ Modem Router ¾ One DC power Adapter for.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Chapter 1. Product Overview Thank you for choosing the TD-W8960N Wireless N ADSL2+ Modem Router . 1.1 Overview of the Router The TD-W8960N Wireless N ADSL2+ Mod em Rout er integrates 4-port Switch, Firewall, NAT-Router and Wireless AP.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 1.2 Main Features ¾ Complies with IEEE 802.11n draft version 2.0 to provide a wireless data rate of up to 300Mbps. ¾ One RJ11 LINE port, four 10/100M Auto-N egotiation RJ45 LAN ports, supporting Auto MDI/MDIX.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 1.3 Panel Layout 1.3.1 The Front Panel The Router’s LEDs are located on the front panel. Figure 1-1 The Router’s LEDs and the QSS button are locate d on the front panel (View from left to right).
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 1.3.2 The Back Panel The Router's ports, where the cables are connected, and RESET button are located on the back panel. Figure 1-2 ¾ LINE: Connect to the Modem Port of Splitter or to the telephone line.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Chapter 2. Connecting the Router 2.1 System Requirement s ¾ Broadband Internet Access Service (DSL/Cable/Ethernet). ¾ PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 6. Turn on the ON/OFF switch to power the Device. It will start to work automatically. Figure 2-1 7.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Chapter 3. Quick Inst allation Guide This chapter will show you how to co nfigure the basic functions of your TD-W8960N Wireless N ADSL2+ Modem Router using Quick Setup Wizard within minutes. 3.1 TCP/IP Configuration The default IP address of the Router is 19 2.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 3-1 Success result of Ping command ¾ If the result displayed is similar to the Figure 3-2 , it means the connec tion between your PC and the Router is failed. Figure 3-2 Failure result of Ping command Please check the connection following these steps: 1.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 3.2 Quick Inst allation Guide With a Web-based utility, it is easy to configure and manage t he TD-W8960N Wireless N ADSL2+ Modem Router.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 3-5 3. Change the VPI or VCI values which are used to define a unique path for your connection. If you have been given specific settings for this to configuration, type in the correct values assigned by your ISP.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 3-7 ) Note: All the existed ATM & WAN service will be clean after click the " Save " button on this Quick Setup page. 5. You will see the Finish screen below, click " Reboot " to save these settings.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 3-9 Figure 3-10 ) Note: More detailed configur ations please refer to 4.4.1 Layer2 Interface and 4.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Chapter 4. Configuring the Router This chapter will show each Web page's ke y functions and the c onfiguration way. 4.1 Login After your successful login, you will see the fift een main menus on the left of the Web-based utility.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-2 ) Note: Click the other submenus under the main menu Device Info , and you wil l be able to view the corresponding information about WAN , Statistics , Route , ARP and DHCP . 4.3 Quick Setup Please refer to Section 3.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide This Advanced Setup section main ly introduces how to configure the Router for adequate use. The detailed explanations for eac h subsection are provided below. ) Note: To completely configure the WAN Interface, you need to first select the Layer 2 Interface ( 4.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-4 ¾ VPI / VCI : the VPI and VCI values provided by your ISP. Do not change them unless it was required by your ISP. ¾ DSL Link Type : Select a DSL Link Type which is prov ided by your ISP.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide ) Note: Enabling packet level QoS for PVC improves perf ormance for selected classes of applications. While QoS consumes system res ources; therefore the number of PVC(s) will be reduced. Besides this, it cannot be set for the connection type of CBR and Real-tim e VBR.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-7 ¾ Remove: Se lect the check box in the tabl e on the screen above and then click the Remove tab, the corresponding interfac e will be deleted in the table. ) Note: One ETH is allowed to configure as the layer 2 WAN Interface.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 4.4.2.1 ATM-EoA-PPPoE If your ISP provides a PPPoE connection and you need to use an AT M Interface, follow the steps below to add a WAN service over a selected ATM interface: 1. Add a new ATM interface and select EoA option for DSL Link Type ( 4.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-11 ¾ PPP Username/Password : Enter the User Name and Pas sword provided by your ISP. These fields are case-sensitive. ¾ PPPoE Service Name : Enter the Service Name if it was pr ovided by your ISP.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide ¾ Enable IGMP Multicast Proxy : IGMP (Internet Group Managem ent Protocol) is used to manage multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration for client devices , such as the Router.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-14 8. On the next screen you will see the WAN Port Information Table with the new configuration. Figure 4-15 ¾ Remove: Select the check box in t he table above and then click Remove , the corresponding interface will be delet ed in the table.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 2. Click the Add button on the screen (as shown Figure 4-8 ). Select WAN Service Interface over ATM PVC on the next screen (as shown Figure 4-9 ).
TD-W8960N Wireless N ADSL2+ Modem Router User Guide device may use IAID value 1 for the virtual circuit corresponding to the first connection object in the data model and value 2 for t he second connection object in the data model.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide ) Note: If you select the Enable NAT checkbox, the NAT menu will be added to the Web-based Utility. We will describe the detailed configuration in 4.4.5 NAT . 6. Click the Next button, and select a preferred wan in terface as the system default gateway.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 1. Add a new ATM interface and select EoA option for DSL Link Type (s ee 4.4.1.1 ATM interfaces ). 2. Click the Add button on the screen Figure 4-8 . Select WAN Service Interface over ATM PVC on the next screen (as shown Figure 4-9 ).
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-20 4.4.2.7 ETH-IPoE If your ISP provides an IPoE connection and you want to use an ETH Interface, follow the steps below to add a WAN service over a selected ETH interface: 1. Add a new ETH interface on the screen of 4.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-21 ¾ IP Address: You can configure the Rout er’s IP Address and Subnet Mask for LAN Interface. • IP Address: Enter the Router’s local IP Address, then you can access to the Web-based Utility via the IP Address, t he default value is 192.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide • End IP Address: Enter a value for the DHCP server to end with when issuing IP addresses. The End IP Address must be sm aller than 192.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-22 Type the new value for the WAN Interface who’ s MAC Address you want to change, and click Save/Apply . Y ou can select corresponding WAN Interf ace from the drop-down list and click Clone button to clone your current PC MAC, and then click Save/Apply .
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 4.4.5.1 Virtual Servers Choose “ Advanced Setup ” Æ “ NAT ” Æ “ Virtual Servers ”, you can set up virtual servers on the screen below (shown in Figure 4-24 ). Virtual servers can be used for setting up public se rvices on your LAN, such as DNS, Email and FTP.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-25 2. Select the Interface which you w ant to use from the drop-down list. 3. Select the service which you want to use from the drop-down lis t. If the list does not have the service you need, type the name of the custom service in the text box.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 4.4.5.2 Port Triggering Choose “ Advanced Setup ” Æ “ NAT ” Æ “ Port Triggering ”, you can set Port Triggering on the screen (shown in Figure 4-26 ). Some applications require that s pecific ports in the Router's firewall should be opened for access by remote devices.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-27 2. Select the application from the drop-down list. If the list does not hav e the application that you want, select the Custom application radio-button, and type the name of the custom application in the text box.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-28 To add a new DMZ Host: You can enter the computer's IP address and then click Save/Appl y to activate the DMZ host you set on this page. ) Note: DMZ host forwards all the ports at the same ti me.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-30 Setup an Outgoing IP Filtering rule: 1. Click the Add button (pop-up Figur e 4-30 ), and you will set the new rule in the next screen (shown in Figure 4-31 ). Figure 4-31 2. Enter the Filter name for the rule, it is excl usive and must be filled.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide ) Note: When you add an Outgoing IP Filtering entry, you must configure at least one condition on the preceding screen except the Filter name.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-33 2. Enter the Filter name for the rule, it is excl usive and must be filled in. 3. Select Protocol in the drop-down list, enter Source IP address , Source Subnet Mask , Source Port , Destination IP address , Destination Subnet Mask , and Destination Port for the rule.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide ) Note: MAC Filtering is only effective on ATM PVC(s) configured in Bridge mode. Figure 4-34 ¾ Change Policy: There are two policies for the MAC filters : FORWARDED and BLOCKED . Select the Change checkbox and click the Change Policy button to change from one policy to another.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-35 2. Select Protocol Type in the drop-down list for the rule. 3. Enter Destin ation MAC Address an d Source MAC Address in the text box. 4. Select Frame Direction in the drop- down list for the rule.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-37 To add a Time Restriction entr y for Parental Control rule: 1. Click the Add button (pop-up Figure 4-37 ), and then you will set the new rule in the next screen (shown in Figure 4-38 ). Figure 4-38 2.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 4.4.7.2 URL Filter This section allows you to confi gure the filter rules based on URL to control the computers in the LAN to access the specified port. Figure 4-39 There are two policies for the URL Filter.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 4.4.8 Quality of Service Choose “ Advanced Setup ” Æ “ Quality of Service ”, you can enable QoS (Quality of Service) on the screen (shown in Figure 4-42 ). QoS helps to prioritize data as it enters your router.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Click the Add button, and you can configure the Qo S queue entry on the next screen (shown in Figure 4-44 ). Figure 4-44 ¾ Name : Set a name for the entry. ¾ Enable : Select Enable option to take this entry effect.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-45 Click the Add button, and you can configur e the QoS on the next screen. Figure 4-46 After you specify the condition, cl ick Save/Apply to save the entry.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-47 4.4.9.1 Default Gateway Choose “ Advanced Setup ” Æ “ Routing ” Æ “ Defau lt Gateway ”, you can see the Defaul t Gateway screen, this screen allows you to select a WAN In terface from the drop-dow n list as the system default gateway.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-49 To add static routing entries: 1. Click the Add button (pop-up Figure 4-50 ), and you will see the screen below (shown in Figure 4-50 ).
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 4.4.9.3 RIP Choose “ Advanced Setup ” Æ “ Routing ” Æ “ RIP ”, you can see the RI P (Routing Information Protocol) screen which allows you to configure the RIP (shown in Figure 4-51 ).
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-53 For PPPoA, PPPoE enabled PVC(s), please select the Obtain DNS info from a WAN interface checkbox, this Router will acc ept automatically t he first received DNS assignment from the selected configured WAN interface dur ing the connection establishment.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-54 To add a DDNS entry: 1. Click the Add button (pop-up Figure 4-54 ), and then you will set the DDNS in the next screen (shown in Figure 4-55 ). Figure 4-55 2. Select D-DNS provider in the drop-d own list.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 4.4.11 DSL Choose “ Advanced Setup ” Æ “ DSL ”, you can see the DS L Settings screen, this screen allows you to configure the DSL (shown in Figure 4-56 ). Figure 4-56 You can select the modulation ty pe, phone line pair and the capabilit y of Bitswap or SRA.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-57 Select the checkbox and click Save /Apply to enable the UPnP function. 4.4.13 Dns Proxy Choose “ Advanced Setup ” Æ “ Dns Proxy ”, you can Enable or Disabl e DNS proxy ap plication on the screen.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-59 To support this feature, you must create mapping groups with appropriate LAN and WAN interfaces using the Add button. The Remove button will remove the grouping and add the ungrouped interfaces to the Default group.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-60 2. Enter a unique name for Group. 3. Select the Interface which you w ant to use from the drop-down list. ) Note: If you like to automatically add LAN clients to a WAN Interfac e in the new group add the DHCP vendor ID string.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide ) Note: These clients may obtain public IP addresses. 5. Click Save/Apply to make t he entry effective immediately. ) Note: If a vendor ID is configured for a specific client device, please REBOOT the c lient device attached to the modem to allow it to obtain an appropriate IP address.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 4.4.16 IPSec Choose “ Advanced Setup ” Æ “ IPSec ”, you can Add/Remove or E nable/Di sable the IPSec tunnel connections on the screen. Figure 4-63 Click Add New Connection to configure the I PSec tunnel connections.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-64 Click Save/Apply to save this entry. Figure 4-65 58.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 4.5 Wireless Choose “ Wireless ”, there are six submenus to configure Wireless LAN settings. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide ¾ Country: Restrict the channel set and transmit power. Click Apply/Save to configure the basic wireless options. 4.5.2 Security Choose “ Wireless ” Æ ” Security ”, you will see the screen of Wireless-Security settings shown as below.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide ) Note: This feature is available only when OPEN , WPA-PSK, WPA2-PSK or Mixed WPA2/WPA-PSK mode is configured. ) Note: 1) To build a successful connection by WSC, y ou should also do t he corresponding configuration of the new device for WSC function meanwhile.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-70 Method Two: Step 1: Press the QSS button on the front panel of the Router. Step 2: For the configur ation of the wireless adapter, please choose “ Push the button on my access point ” in the configuration utility of t he QSS as below, and click Next .
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Step 3: Wait for a while until the next screen appears. Click Finish to complete the QSS configuration. Figure 4-72 II. By PIN If the new device supports Wi-F i Protected Setup and the PIN me thod, you can add it to the network by PIN with the following two methods.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Step 2: For the confi guration of the wirele ss adapter, please choose “ Enter a PIN into my access point or a registrar ” in the configuration utility of t he QSS as below, and click Next .
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-76 4.5.2.2 Manual Setup AP Follow the instructions below to configure security features of the wirele ss LAN interface manually.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-78 ¾ Encryption strength: Select the appropriate level of encryption, 64-bit or 128-bit. ¾ Current Netw ork Key: To indicate which WEP key to use, select a transmission key number.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-79 ) Note: We use Encryption Strength 64-bit, Current Network Ke y selected “1” and enter 10 hexadecimal digits”1908300919” in the Netw ork Key 1 for example, Configure the settings as Figure 4-79 shown above.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide ¾ WPA Encryption: Select the encryption you want to use: TKIP or AES (AES is an encryption method stronger than TKIP). Configure WPA settings 1. Select the WPA option from the Networ k Authentication drop-down list.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Configure WPA-PSK settings 1. Select the WPA-PSK option. The menu will change to offer the appropriate settings as the picture show above. 2. WPA-PSK re quires a shared key. Type the key in the space provided.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-85 ¾ WPA2 Preauthentication: Select Enable from the drop-dow n list, Stations will authenticate with the AP during the scanning process, and once association is required, the station has been already authenticated.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-87 7. Mixed WPA2/WPA-PSK To configure Mixed WPA2/WPA-PSK settings, sele ct the Mixed WPA2/WPA-PSK option from the drop-down list. The menu will change to offer the approp riate settings. The steps of this setting are the same with WPA-PSK.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s RADIUS. To filter wire less users by MAC Address, either permitting or blocking access.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-91 ¾ AP Mode : Select an AP Mode from the drop-down list. Options available are: Access Point and Wireless Bridge. • Access Point : Select this option to allow wireless stations in cluding AP clients to access.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-93 ) Note: Only Open or Shared authentication method suppo rt wireless bri dge, you should choose “ Wireless ” Æ “ Security ” to change authentication method to “open” or ”shared” mode first.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-94 ¾ Channel: Select the channel you want to use from the drop-down List. This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearb y access point.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide ¾ Beacon Interval: Enter a value between 20-1000 millisec onds. The Beacon Interval value indicates the frequency interval of the beacon. A beacon is a pa cket broadcast by the Router to synchronize the wireless network.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-96 4.7 Management Choose “ Management ”, there are six submenus under the main menu. They are Settings , System Log , TR-069 client , Internet Time , Access Control , Update Software and Reboot .
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-97 4.7.1.1 Backup Choose “ Management ” Æ “ Settings ” Æ “ Backup ”, you can see the Backup screen, this screen (shown in Figure 4-98 ) allows you to save the current confi guration of the Router as a backup file.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-100 4.7.1.2 Update Choose “ Management ” Æ “ Settings ” Æ “ Update ”, you can see the Update screen, this screen (shown in Figure 4-101 ) allows you to update the Router’s settings.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-102 ¾ Restore Default Settings: Click this button to restore the Rout er’s configurati on to the factory defaults, and then follow the on-screen instructions to complete it. ¾ Account and Password: The default account name and its password are both admin.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-105 ¾ Disable/Enable: Select the Enable to log the events, if you don’ t want to log these events, please select Disable . ¾ Log Level: Select the Log level in the drop-down list, for the Log level, all events above or equal to the selected level will be logged.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-106 ¾ SNMP Agent: You can select the checkbox to disable or enable the function. ) Note: SNMP Community string provides a simple method of authent ication between t he Router (SNMP Agent) and a remote network manager (SNMP Manag er).
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-107 ¾ Inform: You can select the checkbox to disable or enable the Inform Interval. ¾ Inform Interval: Type the interval time of your Router contact with the ACS . ¾ ACS URL: Please accept this information from your ISP.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide 4.7.5 Internet Time Choose “ Management ” Æ “ Internet Time ”, you can see the Time se ttings screen, this screen (shown in Figure 4-108 ) allows you to set the time for the Router. Figure 4-108 To set the Router’s time: 1.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-109 To change the password: 1. Select the Username whose password you want to change. 2. Enter the Old Password in the text box. 3. Enter the Ne w P as s wo rd and Confirm Pass w ord . The Confirm Password should be the same as the New Password.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-110 ¾ Browse: Click the button to locate the latest software for the device. ¾ Update Firmware: After you have selected the latest software, click the button. To update the Router's software: 1.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Appendix A: FAQ 1. How do I configure the Router to access Internet b y ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide ) Note: Your opposite side should call your WAN IP , which is displayed on the “Status” page. 4) How to ena ble DMZ Host: Log in to the Router, click the “ Advanced Setup - NAT ” menu on the left of your browser, and click " DMZ Host " submenu.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide the “ Add or Modify a Virtual Server ” page, enter “80” into the blank next to the “ Service Port ”, and your IP address next to the “ IP Address ”, assuming 192.168.1.188 for an example, remember to click the Save/Apply button.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Appendix B: Configuring the PC In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is worki ng, refer to the adapter’s manual if necessary.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 0-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 0-3 ) Note: For Windows 98 OS or before, the PC and Router may need to be restarted. ¾ Setting IP address manually 1 Select Use the following IP address radio button. And the fo llowing items available 2 If the Router's LAN IP addre ss is 192.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 0-4 Now: Click OK to keep your settings. 93.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Appendix C: Specifications General Standards ANSI T1.413, ITU G.992.1, ITU G.992. 2, ITU G.99 2.3, ITU G.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output).
TD-W8960N Wireless N ADSL2+ Modem Router User Guide ¾ Browser - An application program th at provides a wa y to look at and interact with all the information on the World Wide Web. ¾ DDNS ( D ynamic D omain N ame S ystem) - Allows the hostin g of a website, FTP server, or e-mail server with a fixed domain name (e .
TD-W8960N Wireless N ADSL2+ Modem Router User Guide ¾ IPoA ( IP and ARP over ATM ) - A protocol that provides extensions to the IP Group for handling IP over ATM flows. ¾ ISP ( I nternet S ervice P rovider) - A company that provides access to the Internet.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide typically the configuration param eter for a wireless PC card. It corresponds to the ESSID in the wireless Access Point and to the wireless network name. ¾ Static IP Address - A fixed address assigned to a computer or device that is connected to a network.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté TP-Link TD-W8960N c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du TP-Link TD-W8960N - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation TP-Link TD-W8960N, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le TP-Link TD-W8960N va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le TP-Link TD-W8960N, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du TP-Link TD-W8960N.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le TP-Link TD-W8960N. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei TP-Link TD-W8960N ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.