Manuel d'utilisation / d'entretien du produit TD-VG3511 du fabricant TP-Link
Aller à la page of 127
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router 1910010723 Rev: 1.0.0.
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of t heir respective holders.
FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This device has been designed to operate with the antennas listed below , and having a maximum gain of 5 dBi. Antennas not included in this list or having a gain greater t han 5 dBi are strictly prohibited for use with this device. T he required antenna impedance is 50 ohms.
Safety Information z When product has power button, the powe r button is one of the way to shut off the product; When there is no power button, the only way to co mpletely shut off power is to disconnect the product or the power adapter from the power source.
TP-LINK TECHNOLOGIES CO., L TD TP-LINK TECHNOLOGIES CO., L TD Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China DECLARA TION OF CONFORMITY For the following equipment: Product Description: 150Mbps Wireless N VoIP ADSL2+ Modem Router Model No.
CONTENTS Package Contents .................................................................................................... 1 Chapter 1. Product Overview ................................................................................... 2 1.1 Overview of the Modem Router .
4.6 Wireless ........................................................................................................................ 43 4.6.1 Basic Settings .............................................................................................
4.12.3 WAN Host ......................................................................................................................... 85 4.12.4 Schedule ..............................................................................................
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 1 Package Content s The following contents should be found in your package: ¾ One TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Route.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 2 Chapter 1. Product Overview Thank you for choosing the TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router . 1.1 Overview of the Modem Router The TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router integrates 4-port Switch, Firewall, NAT-Router and Wireless AP.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 3 1.2 Main Features ¾ Four 10/100Mbps Auto-Negotia tion RJ45 LAN ports (Auto MD I/MDIX), three RJ11 ports, one USB 2.0 ports ¾ Provides external splitter. ¾ Adopts Advanced DMT modulati on and demodul ation technology.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 4 1.3 Panel Layout 1.3.1 The Front Panel Figure 1-1 The Router’s LEDs are located on the front panel (V iew from left to right). They indicate the device’s working status. For details, please refer to LED Explanation.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 5 Off There is no device connected to this LAN port. On A storage device or printer has connected to the USB port. Flash The modem router is sending or receiving data over this USB port.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 6 ¾ RESET: There are two ways to reset t he Router's factory defaults. Method one: With the Router powered on, use a pi n to press and hold the RESET butto n for at least 5 seconds.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 7 Chapter 2. Connecting the Modem Router 2.1 System Requirement s ¾ Broadband Internet Access Service (DSL/Cable/Ethernet). ¾ PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 8 2.3 Connecting the Modem Router Before installing the device, please make sure y our broadband service provided by your ISP is available. If there is any problem, please contact your ISP.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 9 Figure 2-1.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 10 Chapter 3. Quick Inst allation Guide 3.1 Configuring the PC After you directly connect your PC to the Modem RouterT D-VG3511 or connect your adapter to a Hub/Switch which has c onnected to the Modem Router, you need to configure your PC’s IP address.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 11 Figure 3-2 Step 3: Select General tab, highlight Internet Protocol (TCP/IP) , and then click the Properties button.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 12 Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK . Figure 3-4 ) Note: You can configure the PC to get an IP address automatically, select “Obtain an IP address automatically” and “Obtain DNS server addre ss automatically” in the screen above.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 13 If the result displayed is similar to the screen shown belo w, it means t hat your PC has not connected to the Modem Router.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 14 Figure 3-8 ) Note: 1) Do not mix up the user name and password with your ADSL account user name and password which are needed for PPP connections. 2) If the above screen does not pop up, it means that your Web-br owser has been set to a proxy.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 15 Figure 3-10 4. Change the VPI or VCI values which are used to define a unique path for your connection. If you have been given specific settings for this to configuration, type in the correct values assigned by your ISP.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 16 Figure 3-13 7. Basic parameters of Voice can be set on the Voice screen. Please enter a profile name to identify this account and other parameters provided by yo ur ISP.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 17 Figure 3-15 9. You will see the Complete screen below, click Finish to complete these settings.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 18 Chapter 4. Configuring the Modem Router This chapter will show each Web page's key function and the c onfiguration way. 4.1 Login After your successful login, you will see the main menu on the left of the Web-based utility.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 19 Figure 4-1 4.3 Quick Setup Please refer to Section 3.2 Quick Installation Guide . 4.4 Network Choose “ Netw ork ”, there are many submenus under the main menu. Click any one of them, and you will be able to configur e the corresponding function.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 20 4.4.1 WAN Settings Choose “ Netw ork ” Æ “ WAN Settings ”, and you will see the WAN Port Information Table in the screen similar to Figure 4-2 , which describes the WAN port setti ngs and the relevant manipulation to each interface.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 21 Figure 4-3 4.4.1.1 Static IP Select this option if your ISP prov ides static IP information to you. You should set static IP address, IP subnet mask, and gateway address in the screen below.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 22 Figure 4-4 ATM Configuration: ¾ VPI (0~255): Identifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255. Please input the value provided by your ISP.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 23 ¾ Subnet Mask: Enter the subnet Mask in dotted-decimal not ation pro vided by your ISP, usually is 255.255.255.0. ¾ Default Gateway (Optional): Enter the gateway IP addres s in dotted-decimal notatio n provided by your ISP.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 24 Figure 4-5 Click Advanced , advanced selections for WAN Service Setup can be shown. ¾ MTU (bytes): Maximum Transmission Unit Size. Check this box then you can change the MTU size. The default MTU value is 1500 Bytes.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 25 ¾ Enable IGMP Proxy : IGMP (Internet Group Management Protocol) is used to manage multicasting on TCP/IP networks. So me ISPs us e IGMP to perform remote configuration for client devices, such as the Modem Router.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 26 ¾ PPP Username/Password/Confirm Password: Enter the User Name, Password and Confirm Password provided by your ISP.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 27 Figure 4-7 4.4.1.5 IPoA If your ISP provides an IPoA connection, select IPoA option for the WAN service t ype on the screen.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 28 Figure 4-8 ¾ IP Address/Subnet Mask: Enter the IP Address and Subnet Mask provided by ISP. If you forget, you can ask your ISP. ¾ DNS Server/Secondary DNS Server: Type in your preferred DNS server.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 29 Figure 4-9 ) Note: After you finish the Internet configuration, please click Save to m ake the settings take e ffe ct. 4.4.2 EWAN Choose “ Netw ork ” Æ “ EWAN ”, and you will see the Ethernet WAN Interface screen similar to Figure 4-10 .
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 30 Figure 4-10 4.4.2.1 Dy n ami c IP Select this option, the Modem Router will be abl e to obtain IP network information dynamically from a DHCP server provided by your ISP (as shown Figure 4-10 ).
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 31 Figure 4-11 4.4.2.3 PPPoE If your ISP provides a PPPoE connection and you need to use an Ethernet Interface, select PPPoE option for the WAN service type on the screen. The following configuration is similar to PPPoE over ATM interface (see section 4.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 32 Figure 4-12 4.4.3 Interface Grouping Choose “ Network ” Æ “ Interface Grouping ”, you can view all the current groups on this page (shown in Figure 4-13 ).
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 33 Figure 4-13 ¾ VLAN: Enable or disable this function. Virtual LAN (VLAN) is a group of devices on one or more LANs that are configured so that they can communicate as if they were attached to the same LAN, when in fact they are located on a number of different LAN segments.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 34 Figure 4-14 Click Save to make the entry effective immediately 4.4.4 LAN Settings Choose “ Network ” Æ “ LAN Settings ” menu, and you will see the LAN screen (shown in Figure 4-15 ).
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 35 Figure 4-15 ¾ IP Address: You can configure the Modem Router’s IP Address and Subnet Mask for LAN Interface. • IP Address: Enter the Modem Router’s local IP A ddress, then you can access to the Web-based Utility via the IP Addre ss, the default val ue is 192.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 36 • End IP Address: Enter a value for the DHCP server to end with when issuing IP addresses. The End IP Address must be sm aller than 192.168.1.254. The default End IP Address is 192.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 37 Figure 4-17 ¾ Virtual Private Network (VPN) - VPN Passthrough must be enabled if you want to allow VPN tunnels using VPN protocols to pa ss through the Modem Router.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 38 Figure 4-18 ¾ DSL Modulation Type: Select the DSL operation Modulation Type which your DSL connection uses. ¾ Annex Type: Select the DSL operation Annex Type which your DSL connection uses.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 39 Figure 4-19 ¾ Start IP Address: Enter a value for the DHCP server to start with when issuing IP addresses. Because the default IP address for the Modem Router is 192.168.1.1, the default Start IP Address is 192.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 40 ) Note: 1) To use the DHCP server func tion of the Modem Router, you mu st configure all computers on the LAN as "Obtain an IP Address automatically". 2) Y ou have to disable NA T of the W AN connections, or the DHCP Relay may not take ef fect.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 41 Figure 4-21 ¾ MAC Address: The MAC address of the PC for which you want to reserve an IP address. ¾ IP Address: The IP address reserved for the PC by the Modem Router. ¾ Status: The status of this entry either Enabled or Disabled .
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 42 Figure 4-23 To add a vendor class: 1. Click the Add New button. Then Figure 4-24 will pop up. 2. Enter param eters for the vendor class. Click the Save button. Figure 4-24 To modify or delete an existing entry: 1.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 43 4.6 Wireless Choose “ Wireless ”, there are six submenus to configure Wireless LAN settings. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 44 Router in a region other than one of those specified in this field . If your country or region is not listed, please contact your local government agency for assistance. ¾ Mode : Select the desired mode.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 45 ¾ SSID (to be bridged): The SSID of the AP your Modem R outer is going to connect to as a client. You can also use the search f unction to select the SSID to join. ¾ BSSID (to be bridged): The BSSID of the AP your Modem R outer is going to connect to as a client.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 46 ¾ WPS: Enable or disable the WPS function here. ¾ Current PIN: The current value of the Modem Router's PIN is displayed here. The default PIN of the Modem Router can be found in the label or User Guide.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 47 Figure 4-27 Step 2: Press and hold the WPS button of the client device directly. Step 3: The Wi-Fi Protected Setup LED flashes for tw o minutes during the Wi-Fi Protected Setup process.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 48 ) Note: 1) The WPS LED on the Modem R outer will light green for five minutes if t he device has been successfully added to the network. 2) The WPS function cannot be c onfigured if the Wireless Functi on of the Modem Router is disabled.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 49 Figure 4-30 • Auth Type - you can choose the type for the W EP security on the drop-down list. The default setting is Automatic , which can select Shared Key or Open System authentication type automatically based on the wire less station's capability and request.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 50 • PSK Password - You can enter ASCII characters betwe en 8 and 63 characters or 8 to 64 Hexadecimal characters. • Group Key Update Period - Specify the group key update inte rval in seconds.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 51 3. Select Enabled or Disabled for this entry on the Status drop -down list. 4. Click the Save button to save this entry. T o edit or delete an existing entry: 1. Click the Edit in the entry you want to modify.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 52 Figure 4-33 ¾ Transmit Power: Here you can specify the transmit power of Modem Router. You can select High, Middle or Low which you would like. High is the default setting and is recommended.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 53 4.6.6 Wireless Status Choose menu “ Wireless ” Æ ” Wireless Status ”, you can see the MAC A ddr ess, Current Status, Received Packets and Sent Packets fo r each connected wireless station.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 54 Figure 4-35 ¾ Profile Name: Displays the profile name of the account. ¾ Registrar Address: Displays the IP address or domin name of the SIP Registrar server. ¾ Phone Number: Displays the phone number of the account.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 55 ¾ Display Name: Assign a name for your account. This name is the Caller-ID you want to be displayed on your friend’s display panel, which c an let your friend easily know who is calling.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 56 This section includes Dial Plan List and Forbidden Call. The function allows users to set rules for outgoing calls. 4.7.2.1 Dial Plan List Choose “ Voice ” Æ “ Dial Plan ” Æ “ Dial Plan List ”, you will see the screen similar to Figure 4-37 .
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 57 ¾ Prefix: Set number(s) as the prefix. Up to 16 characters can be entered. ¾ Destination: SIP account can be selected here. As to which one will be finally used, it depends on not only Destination selected here but also Dia l Plan Priority configured on Phone Setup page.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 58 Figure 4-39 ¾ Prefix: Displays the prefix of your plan. This prefix refers to the initial digit(s) of the num bers you dial. ¾ Forbidden: Displays the interface(s) disabled in this plan.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 59 Figure 4-41 ¾ Phone Enable: Check the box behind to enable the function. Dial Settings ¾ Dial Plan Priority: The parameters configured in the 2 nd field determine which SIP account to use when making outgoing calls.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 60 ¾ Warmline Number: Click “ View/Set ” button to view or set Warmline Number. Answer Settings ¾ MWI Mode: Options available are VMWI and CLID. If you don't know, please consult your service provider.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 61 Figure 4-42 SIP Advanced Setup: ¾ Bound Interface Name: Bound Interface decides where to send/receive the VOIP traffic. Easy way to select the interface is to check the location of the SIP server.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 62 facsimile terminals over the Internet or other networks using IP protocol s. It will only function when both sites support this feature and are enabled. 4.7.5 Speed Dial Choose “ Voice ” Æ “ Speed Dial ”, you will see the screen as shown in Figure 4-43 .
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 63 4.7.6 Call Log Choose “ Voice ” Æ “ Call Log ”, you will see the screen as shown in Figure 4-46 .
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 64 Call Firewall can be used to control incoming calls. This section introduces how to configure the Call Firewall. Choose “ Voice ” Æ “ Call Firewall “ Æ “ Mode Setting “, you will see the screen as shown in Figure 4-48 .
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 65 Figure 4-50 Enter a number with the length in t he range of [3, 16]in the field of Black List Number and Click the Save button to make the configuration take effe ct, then you will go back to the previous page and see the following list as shown in Figure 4-49 .
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 66 4.7.8 USB Voice Mail Choose “ Voice ” Æ “ USB Voice Mail “, you will see the screen as shown in Figure 4-53 . USB Voice mail is used to record voice messages when the call is not answered.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 67 Figure 4-54 ¾ Enable Local Play Operation Notify: Check this box so there will be sound indication for operation when you listen to the voice messages. This is enabled by default. If you are very familiar with the operation s, you can disable it.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 68 3) Input the PIN code according to the notification. 4) You can listen to all the new mess ages after the PIN code is validated. Click Save to save your configurations. Click Back to go back to the previous page, i.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 69 ¾ File System: The system of the USB drive. ¾ Capacity: The storage capacity of the USB driver. ¾ Status: Indicates the shared or non- shared status of the volume. Online means volume can be shared, while Offline means volume can not be shared.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 70 3. Enter the password in the New Password field. 4. Re-enter the password in the Confirm Passw ord field. 5. Click the Set button, and then a new entry will be added in the table. 6. Click the Apply button to apply your settings.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 71 1. Click Add New Folder in Figure 4-57 . Figure 4-58 2. Click the Browse button, and then select the Select Volume from the drop-down list. 3. Enter display name of the share folder in Share Name filed.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 72 Figure 4-59 ¾ Server Status: Indicates the FTP Server's current status. ¾ Internet Access: Enable or disable this function. ¾ Internet Address: If Internet Access is enabled, WAN IP will be displayed here.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 73 Figure 4-60 2. Click the Browse button, and then select the Select Volume from the drop-down list. 3. Enter display name of the share folder in Share Name filed. 4. Click the Apply button to apply the settings.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 74 ¾ Server Enable: Select this box to enable this function. ¾ Server Name: The name of this Media Server. To add a new share folder for your media server, please follow the instructions below: a) Click Add Ne w Folder button, and you will see the screen as shown in Figure 4-62 .
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 75 4.9 Route Settings Choose “ Route Settings ”, it includes three menus : Default Gatew ay , Static Route and RIP Settings .
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 76 Figure 4-66 2. Enter the following data: ¾ Destination IP Address: The Destination IP Addr ess is the address of the network or host that you want to assign to a static route.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 77 ) Note: RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE). 4.10 Forwarding There are four submenus under the Forwarding menu: Virtual Servers , Port Triggering , DMZ and UPnP .
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 78 2. Select the service y ou w ant to use from the Common Service Port list. If the Common Service Port menu does not list the serv ice that you want to use, enter the number of the service port or service port range in the Service Port field.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 79 Figure 4-70 To add a new rule, follow the steps below. 1. Click the Add New button, the next screen will pop-up as shown in Figure 4-71 .
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 80 ¾ Open Protocol: The protocol used for Incoming Port , either TCP , UDP , or ALL (all protocols supported by the Modem Router). ¾ Status: The status of this entry, Enabled means the Port Triggering entry is enabled.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 81 Figure 4-72 To assign a computer or server to be a DMZ server: 1. Click the Enable button. 2. Enter the IP address of a local PC that is set to be DMZ host in the DMZ Host IP Address field.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 82 Click the Disable button to disable UPnP. Click the Refresh button to update the Curr ent UPnP Settings List. 4.11 Parent al Control Choose menu “ Parental Control ”, and you can configure the paren tal control in the screen as shown in Figure 4-74 .
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 83 ¾ MAC Address of Current PC: This field displays the MA C address of the PC that is managing this Modem Router. If the MAC Address of your adapter is registered, you can click the Copy To Above button to fill this address to the MAC Address of Parental PC field above.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 84 ¾ Add New: Click the Add New button to add a new rule entry. ¾ Enable Selected: Click the Enable Selected button to enable the selected rules in the list. ¾ Disable Selected: Click the Disable Selected button to disable the selected rules in the list.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 85 ¾ Description: Here displays the description of the host and this description is unique. ¾ Address Info: Here displays the information about the host. It can be IP or MAC. ¾ Edit: To modify an existing entry.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 86 Figure 4-79 1) In Description field, create a unique description for the host (e.g. Host_1). 2) In IP Address field, enter the IP address. If you select MAC Address , the screen shown is Figure 4-80 .
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 87 4.12.4 Schedule Choose menu “ Firewall ” → “ Schedule ”, and then you can view and set a Schedule list in the next screen as shown in Figure 4-82 . Figure 4-82 ¾ Description: Here displays the description of the schedule and this description is unique.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 88 Click the Delete Selected button to delete the select ed entries in the table. 4.13 Bandwid th Control Choose menu “ Bandwidth Con.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 89 Figure 4-85 3. Click the Save button. 4.14 IP&MAC Binding There are two submenus under the IP &MAC Binding menu: Binding Settings and ARP List . Click any of them, and you will be able to scan or configure the corre s ponding function.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 90 ¾ Bound: Check this option to enable ARP binding for a specific device. ¾ Edit: To modify or delete an existing entry. When you want to add or modify an IP & MAC Binding entry, you can click the Add New button or Edit button, and then you will go to the next page.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 91 ¾ IP Address: The assigned IP address of the cont rolled computer in the LAN. ¾ Status: Indicates whether or not the MAC and IP addresses are bound. ¾ Load: Load the item to the IP & MAC Binding list.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 92 Figure 4-90 4.17 System T ools Choose menu “ System Tools ”, and you can see the s ubmenus under the main menu: System Log , Time Settings , Manage Control , CWMP Settings , SNMP Settings , Backup & Restore , Factory Defaults , Firm ware Upgrade , Reboot and Statistics.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 93 Figure 4-91 ¾ Log Type: By selecting th e log type, only logs of this type will be shown. ¾ Log Level: By selecting the log level, only logs of this level will be shown. ¾ Refresh: Refresh the page to show the latest log list.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 94 Figure 4-93 ¾ Time Zone: Select your local time zone from this pull down list. ¾ Date: Enter your local date in MM/DD/YY into the right blanks. ¾ Time: Enter your local time in HH/ MM/SS into th e right blanks.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 95 Figure 4-94 ¾ Current User Status: This box displays the information about User Type , User Name , Host IP Address and Host MAC Address . ¾ Account Management: Here you can set the account user information about Old Passw ord , New User Name , New Password and Confirm Passw ord .
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 96 Figure 4-95 ¾ CWMP: Select enable the CWMP function. ¾ Inform: Enable or disable the function. If enabl ed, the information will be informed to ACS server periodically. ¾ Inform Interval: Enter the interval time here.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 97 Figure 4-96 An SNMP Agent is an application running on the Modem Router that performs the operational role of receiving and processing SNMP messages, sending responses to the SNMP manager, and sending traps when an event occurs.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 98 Figure 4-98 Click the Restore button to reset all configuration settings to their default values. • The default User Name : admin • The default Password : admin • The default Subnet Mask : 255.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 99 want to use. However, when experiencing probl ems caused by the Modem Router rather than the configuration, you can try to upgrade the firmware.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 100 Figure 4-101 ¾ Statistics Status: Enable or Disable. The default value is disabled. To enable it, click the Enable . If it is disabled, the func tion of DoS protection in Securi ty settings will be disabled.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 101 Appendix A: Sp ecifications General Standards and Protocols ANSI T1.413.I2, ITU G.992.1, ITU G. 992.2, ITU G.992.3, ITU G.992.5, IEEE802.1p, IEEE 802.11b,IEEE 802.11e, IEEE 802.11g, IEEE 802.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 102 Appendix B: T roubleshooting T1. How do I restore my Modem Router’s configur ation to its factory default settings? With the Modem Router powered on, press and hold the RESET button on the back panel for 8 to 10 seconds before releasing it.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 103 Click Change adapter settings Click Properties Right-click Local Area Connection.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 104 Double-click Internet Protocol Version 4 (TCP/IPv4) Click OK Select Obtain DNS server address automatically Select Obtain an IP add.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 105 For Windows Vista OS Go to Start > Settings > Control Panel , and then you will see the following page.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 106 Double-click Internet Protocol Version 4 (TCP/IPv4) Select Obtain an IP address automatically Select Obtain DNS server address auto.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 107 For Windows XP OS Go to Start > Control Panel , you will then see the following page.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 108 Double-click Internet Protocol (TCP/IP) Select Obtain DNS server address automatically Select Obtain an IP address automatically Cl.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 109 Click OK 2) Configure your IE browser Open your IE browser, click Tools tab and you will see the following screen.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 110 Click OK Select Never dial a connection Now, try to log on to the Web- based configuration page again afte r the above settings have been configured.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 111 2) Insert the provided Resource CD into CD-ROM drive of your computer. 3) Please select your product model and click Start Setup . 4) Then the configur ation wizard will pop up and show you how to connect your devices.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 112 5) When it comes to Configure USB Voice Mail page, check boxes before Configure USB Voice Mail and Send Files to USB Disk , enable USB Mail for Line 1 or Line 2. Then click NEXT to continue.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 113 7) The configure files can be found in your USB device which means you have successfully configured the USB device for USB Voice Mail function.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 114 Appendix C: T elephony Features Call Holding This feature allows you to put a call on hold, in which case the call is not ended but no verbal communication is available. To put a call on hold, press the FLASH button.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 115 Anonymous Call Blocking With this feature enabled, all anonymous calls will be blocked. Speed Dial This feature allows you to create short number s for your freq uently used telephone numbers to make your dialing more convenient.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 116 Appendix D: T elephone Operation Code Description Usage *20 Listen to voice messages stored in your USB storage device. Pick up the phone to dial this code and then follow the voice prompts for the operations below: Press 0 to listen to new messages.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 117 *69 Dial the last incoming number. Pick up the phone to dial this code. The last incoming number will be dialed automatically. *68 Dial the last outgoing number. Pick up the phone to dial th is code.
TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide 118 Appendix E: T echnical Support Technical Support For more troubleshooting help, go to: http://www.tp-link.com/e n/support/faq T o download the latest Firm ware, Driver , Utility and User Guide, go to: http://www .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté TP-Link TD-VG3511 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du TP-Link TD-VG3511 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation TP-Link TD-VG3511, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le TP-Link TD-VG3511 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le TP-Link TD-VG3511, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du TP-Link TD-VG3511.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le TP-Link TD-VG3511. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei TP-Link TD-VG3511 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
