Manuel d'utilisation / d'entretien du produit IK-WP41A du fabricant Toshiba
Aller à la page of 25
NETWORK CAMERA Model: IK-WP41A Quick Start Guide and Imp ortant Safeguards This guide describes the hardware inst allation. Refer to the user's manua l (PDF file) contained in the CD-ROM for settings, operations and other information. The application Adobe Reade r is needed to view PDF files.
1 Introduction FCC (USA )-INFORMATION NOTE: T his equipme nt has been tested and foun d to compl y with the limits for a Class A digital device, pursu ant to Part 1 5 of the FCC Rules. These limits ar e designed to pro vide reas onable prote ction ag ainst harmful interference w hen the equip ment is op erated in a commercial environment.
2 Thank you for pur chasing th e IK-W P41A Net work Camera. Be fore using th e camera, read this quick star t guide caref ully to ens ure correct usage. A fter reading this quick start guide, sa ve it for future ref erence. The design, speci fications, so ftware, and quick st art guide co ntents ar e subject to change without pri or notice.
3 Table of Co ntents Introduction .......... ............. ............ ............ ....................... ............ ............ ...................... ............. ............ ........... 1 FCC (USA)-INFORM ATION .......... ............. ....
4 Import ant Safeguards 1. Read Instructions Read all the safety and ope rating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. Warnings Comply with all warnings on the p roduct and in the user's manual.
5 12. Lightning For additional protection on this camera during a lightning storm , or w hen it is left unattended and unused for long period s of time, unplug it from the wall outlet and disconnect the power supp ly and cable system. This will prevent damage to the cam era due to lightning and power-line surges.
6 Import ant Safeguards (Cont.) CAUTION T O REDUCE T HE RISK OF EL ECTRIC SHOC K. DO NOT RE MOVE COVER. NO USER SERVICEABL E PAR TS INSIDE. RE FER SERVICING T O QUALIFIED SERVICE PERSON NEL.
7 Notes on U se and Inst allation Do not aim the camera at th e sun Never aim the camera at the sun even wit h the camera power off. Do not shoot int ense light Intense light such as a spotli ght may cau se a blo om or smear. A vertical stripe may appear on the screen.
8 Setting the Netwo rk Camera Env ironme nt Items needed for network camera mon itoring Administrator's personal c omputer The personal c omputer that allows settin g, operati ng, monitori ng and o ther functions with the network ca mera is calle d the "admi nistrator's personal computer" in this guide.
9 Package Co ntent s IK-W P41A ---- 1 Allen wrench ---- 1 Torx wrench - --- 1 Screw (1/4-20 UNC, 12mm) ---- 1 RJ45 Coupler ---- 1 Silica-gel ---- 1 CD-ROM ---- 1 Quick Start gu ide and Import ant Safe.
10 Hard w are Installation First, use the supplied torx wrench to det ach the dome cover from the camera ho using. Then, follow the steps belo w to install the camera. NOTE: Installation should be d one only by qualified personnel and conform to all local codes.
11 (2) Attach a silica-gel Get out the supplied silica-gel from the a luminum foil bag, and set it as attached image. NOTE: Treat silica-gel bag with care , Don’t tear the silica-gel package. WARNING: Keep the silica-gel out of the reach of babies, infants, and children.
12 2. Install to the mounting bracke t IK-WP41A supports several mou nting brackets like pendant mount, wall mount, etc. Sele ct an appropriate bracket acco rding to your location, and purchase separately. Here are major instan ce of installation. For more information about accesso ries, visit www.
13.
14 2.2 W all Mount With Electrical Box (JK-WMB41 A) A) Drill 4 holes on the wall mat ching the mount holes on the plate. Diameter φ 3/8” (9.5mm), depth 1/1/2 ” (39mm) B) Hammer 4 anchor bolts (not supplied) into the holes and secure them. (Figure 1) C) Secure the electrical box to the wall with hex nuts and wrench (no t supplied).
15 Warning: The safety wire must be conn ected to the camera and wall mount bracket. This will avoid personal ha zards if the unit falls from its installation. W hen installing the camera, secure the safety wire to the screw holes on the bracket. Make su re there are no damaged parts during assembly.
16.
17 3. Cable connection No. Connector Descriptions 1 RJ-45 Conne ctor For Ethernet connection. Con nects this port to the L AN port of Ethernet sw itch via sup plied coupler. Supporting Po E+, this port can connect t o the PoE+ sw itch or PoE+ in jector.
18 6 Alarm In 5 (B lue) Connect to dev ice that r esponds to alarm s ignals. Alarm In 6 (Gr een) Alarm In G ND (White) 7 Alarm In 1 ( Red) Connect to dev ice that t riggers alarm signa ls. Alarm in 2 (Brow n) 8 Alarm In 3 (Y ellow) Connect to dev ice that t riggers alarm signa ls.
19 3.2 Optional connection such as alarm in/out devices to the camera. Network Deploy ment 1. Connect the Camera to the Network Using an Ethernet cab le (not supplied), connect one end to the RJ45 connector of the camera and the other end to the LAN port of the network switch via sup plied RJ45 coupler.
20 appear. Click the camera you want to configure the network settings. If you have mu ltiple cameras connected to your local ne twork, the MAC address on the came ra to distinguish the target cam era from others. Configure the following settings as needed.
21 Log-in Screen Double-Click the listed cam era to login on the IP Camera Finder . Input the administrator log-in ID and password in the user name and password fields and click the OK button. The administrator log-in ID and password are set to "admin" and to "1234" respectively by default.
22 Retrievi ng Images Retrieve live video through Internet Explorer®. A menu is show n if t he menu button on a scr een is cli cked..
23 A camera contr o l pa nel is s hown i f PTZ C ontr ol is cl icked. A camera set up menu i s shown if “Co nfigura tion” is clicked on the following screen . A live video of camer a is sh own i f “Liv e Video” is cl icked on the follow ing scr een.
24 TOSHIB A AMERIC A INFORM ATION SYSTEMS, INC. Surveillance & IP Video Prod ucts 9740 Irvine Boule vard, Irvine, CA 926 18-1697 Phone Number : (877) 855-1 349.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Toshiba IK-WP41A c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Toshiba IK-WP41A - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Toshiba IK-WP41A, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Toshiba IK-WP41A va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Toshiba IK-WP41A, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Toshiba IK-WP41A.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Toshiba IK-WP41A. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Toshiba IK-WP41A ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
