Manuel d'utilisation / d'entretien du produit MD-801RMKII du fabricant Tascam
Aller à la page of 29
» M D-801 R @#/ M D-801 P @# MD Recorder/Pla y er O WNER’S MANU AL CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE.
Table of Contents TASCAM MD-801R/P Mk II –i 1 - Introduction 1.1 About the MiniDisc format ................ 1-1 1.1.1 ATRAC compression .......................... 1-1 1.1.2 Buffer memory .................................... 1-1 1.1.3 Random access and U-TOC .
Table of Contents –ii TASCAM MD-801R/P Mk II 4.2.1 Playing back a whole disc .................. 4-1 4.2.2 Playback outputs ................................ 4-1 4.2.3 Monaural playback .............................. 4-1 4.2.4 Playing back a single track .
TASCAM MD-801R/P Mk II 1–1 1 - Introduction This manual cov ers the two models of the MD-801 Mk II product line: the MD-801R Mk II, which is capable of recording and playing back on MiniDisc media, and the MD-801P Mk II, which is for play- back only of such media.
1 - Care of MD media 1–2 TASCAM MD-801R/P Mk II disk from the user , and a file appears as one contigu- ous block of data (e v en though it may be spread o v er many tracks and sectors of the disk), the MD player allo ws separated audio data to appear as a continuous audio track.
1 - About the MD-801R/P Mk II TASCAM MD-801R/P Mk II 1–3 to be con v eniently carried out using a standard k e y- board • Remote control possible from dedicated T ASCAM remote control units (RC-80.
1 - About this manual 1–4 TASCAM MD-801R/P Mk II 1.3.4 Backup memory When the unit is po wered down, the follo wing set- tings are memorized. • A UTO READ Y status (see [20] ) • A UTO CUE settin.
TASCAM MD-801R/P Mk II 3–1 3 - Menu items The selections that can be made using the MD-801’ s menu system af fect the operation of many other functions. W e suggest that you take the time to look through this section and familiarize yourself with the basic contents, so that you hav e an idea of some of the options av ailable to you.
3 - Resume setting 3–2 TASCAM MD-801R/P Mk II The minimum length for the jog loop is 12 frames, and the maximum v alue is 32 frames. The v alue is set in 1-frame steps.
3 - Incremental play TASCAM MD-801R/P Mk II 3–3 3.10 Incremental play This function allo ws auto-cueing of the playback point to the start of the next track when the ST OP key [5] is pressed, or a fader stop command is recei ved (on pin 8 of the parallel remote control port [47] ).
3 - Auto track numbering level 3–4 TASCAM MD-801R/P Mk II 3.12.1Spindle motor time Use this to check ho w many hours the spindle motor has been in operation. 3.12.2Laser pickup time This indicates ho w many hours the laser pickup has been used for recording.
TASCAM MD-801R/P Mk II 4–1 4 - Basic operations This section gi ves you informstion about the basic operations using the MD-801. It assumes that you hav e connected the MD-801 to all the other equipment that you will be using. If you hav e not already made these connections, read 2.
4 - Playback of discs 4–2 TASCAM MD-801R/P Mk II 4.2.4 Playing bac k a single track When the disc has been loaded and the T OC has been read, use the PLA Y MODE ke y to select the SINGLE play mode (see [22] ). Use the TRA CK ke ys [4] to mov e the playback posi- tion to the start of the desired track.
4 - Playback of discs TASCAM MD-801R/P Mk II 4–3 4.2.9 Repeat playbac k Use the REPEA T key [26] to enable the repeat mode as sho wn in the display ( REPEA T ). The three dif ferent repeat modes av ailable corre- spond to the three playback modes set with the PLA Y MODE key [22] (whole disc, SINGLE track or A-B points, as set abov e).
4 - Recording operations 4–4 TASCAM MD-801R/P Mk II NO TE The point at which the JOG ke y was pressed will not be included in the jog loop . T o include this point in the loop , you m ust tur n the JOG dial counterclockwise .
4 - Recording operations TASCAM MD-801R/P Mk II 4–5 MD-801R model only . 4.3.1 General notes on recording using the MD format Because the MD method of recording is some what dif ferent to a linear recording method, such as tape, you should note the follo wing points.
4 - Recording operations 4–6 TASCAM MD-801R/P Mk II 1 Select the recording method (digital or analog) and the appropriate input source. 2 Make sure the unit is stopped.
4 - Recording operations TASCAM MD-801R/P Mk II 4–7 2 Cue the playback point to the place that you want to start recording. 3 Press the READ Y ke y [7] to put the MD-801 into play ready mode. This step is the primary dif ference between replace recording and ordi- nary post-script recording.
4 - Recording operations 4–8 TASCAM MD-801R/P Mk II vious one. If the digital signal is not resumed within 30 seconds of interruption, recording will stop .
TASCAM MD-801R/P Mk II 5–1 5 - Editing operations Unlike tape or other linear media, the MD-801 pro- vides you with a wide range of editing tools, allo w- ing you to make arbitary cuts, “splices” and rearrangements of running order without having to re-record any parts of the material.
5 - Erasing a track 5–2 TASCAM MD-801R/P Mk II of the loop is the point at which you want to di vide the track. NO TE Y ou can set the length of the jog loop in the menu system (see 3.5, "Jog loop length"). 5 When the start of the jog loop is correctly posi- tioned, turn the SHUTTLE wheel clockwise.
5 - Moving tracks TASCAM MD-801R/P Mk II 5–3 The PLA Y indicator abov e the PLA Y ke y will flash, as will the EDIT indication in the display , to sho w that rehearsal mode has been entered.
5 - A and B point erase operations 5–4 TASCAM MD-801R/P Mk II of operation is the same, the function is so flexible that it can be used for many dif ferent purposes.
5 - Moving an A-B point TASCAM MD-801R/P Mk II 5–5 If the A point is set at the start of a track, and the B point at the end of another track, the whole of the tracks containing and between these points will be erased (in the example abo ve, tracks 2 and 3 will be erased.
5 - Restoring erased material 5–6 TASCAM MD-801R/P Mk II bers are renumbered accordingly . See the dia- gram abov e for an example. If you need to make the ne w track (formerly the A-B portion) into part of the preceding and/or follo wing track, use the track combine facility (see 5.
5 - Erasing a complete disc TASCAM MD-801R/P Mk II 5–7 3 T urn the SHUTTLE wheel clockwise. The dis- play changes: 4 T urn the SHUTTLE wheel clockwise once again to change the current track from mono to stereo or vice versa . The display will sho w Now Editing , follo wed by Complete .
5 - Track and disc title entry 5–8 TASCAM MD-801R/P Mk II tion will mov e the cursor more than one position. 7 Continue using the D ATA dial and SHUTTLE wheel to enter characters, until the title is complete. 8 T o store the title, press the EDIT ke y .
5 - Track and disc title entry TASCAM MD-801R/P Mk II 5–9 5.11.6Copying disc and trac k titles When two MD-801 units are connected together using the optional PW -1XMD serial cable, disc and track titles can be copied from one unit (master) to the other (slav e), as described in 4.
TEAC CORPORATION Phone: (0422) 52-5082 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC. Phone: (213) 726-0303 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD. Phone: 905-890-8008 Facsimile: 905-890-9888 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada TEAC MEXICO, S.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Tascam MD-801RMKII c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Tascam MD-801RMKII - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Tascam MD-801RMKII, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Tascam MD-801RMKII va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Tascam MD-801RMKII, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Tascam MD-801RMKII.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Tascam MD-801RMKII. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Tascam MD-801RMKII ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
