Manuel d'utilisation / d'entretien du produit CD-01U du fabricant Tascam
Aller à la page of 26
TASCAM CD - 01U/CD-01U PRO RS-232C Protocol Specifications 1 TEAC Corporation TASCAM CD -0 1U/CD-01UPRO CONTROL I/O Terminals RS-232C Protocol Specifications Ver.
TASCAM CD - 01U/CD-01U PRO RS-232C Protocol Specifications 2 TEAC Corporation 1. Overview The CD-01U/CD-01U PRO (here referred to as “ controlled device ”) functions can be controlled using a serial RS-232C connection from an external device, such as a computer.
TASCAM CD - 01U/CD-01U PRO RS-232C Protocol Specifications 3 TEAC Corporation CD-01U/CD-01U PRO E xternal controller RXD TXD GND GND RXD TXD 2 3 5.
TASCAM CD - 01U/CD-01U PRO RS-232C Protocol Specifications 4 TEAC Corporation 3. Command Format 3.1. Command Format Overview Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8 … Byte n LF ID Command Data 1 Data 2 Data 3 Data 4 … CR The codes described here are transmitted in ASCII format (e.
TASCAM CD - 01U/CD-01U PRO RS-232C Protocol Specifications 5 TEAC Corporation 3.3. List of Commands Control/Preset/Sense Command Return Command 88 TIME DATA 0F INFORMATION REQUEST 8F INFORMATION RETUR.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 6 TEAC Corporation Version up history Ver. 1.00: Released version. Ver. 1.02: Following commands to be added.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 7 TEAC Corporation 3.4. Command Sequence The CD-01U/CD-01U PRO does not have the “ ACK ” command for the each transport control command and data preset command.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 8 TEAC Corporation 4. Command Detail Commands, data, and machine IDs which are described here are represented in characters (ASCII). A command is a 2-byte character, a Machine ID is a 1-byte character, and each data is a 1-byte character.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 9 TEAC Corporation 4-6. SHUTTLE Performs the search function in SHUTTLE mode. SHUTTLE mode is maintained until the other command such as STOP, PLAY, or READY is received.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 10 TEAC Corporation 4-10. AUTO CUE LEVEL PRESET Sets the Auto Cue level of the controlled device. When this command is transmitted with request data ([FF ] ), the controlled device returns the AUTO CUE LEVEL RETURN command [A0].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 11 TEAC Corporation 4-12. PITCH CONTROL DATA PRESET Sets the Pitch Control value from – 12 . 5 % to +12. 5 % in 0.1% steps. When this command is transmitted with request data ([FF ] ), the controlled device returns the PITCH CONTROL DATA RETURN command [A5].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 12 TEAC Corporation 4-14. FADE IN/OUT TIME PRESET Sets the fade in and out time from 1 to 10 seconds in 1 second steps. When this command is transmitted with request data ([00FF ] or [01FF ] ), the controlled device returns the FADE IN/OUT TIME RETURN command [AE].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 13 TEAC Corporation 4-17. TIMER/ RESUME PLAY SELECT Turns the Power-on-play mode and Resume Play mode on and off . When this command is transmitted with request data ( [FF] ) , the controlled device sends the RESUME PLAY SELECT RETURN command [B4] .
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 14 TEAC Corporation 4-20. REPEAT SELECT Sets the Repeat mode. When this command is transmitted with request data [FF], the controlled device returns the REPEAT SELECT RETURN command [B 7 ].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 15 TEAC Corporation 4-23. TIME DATA SEND SELECT Sets the Time mode of the time data that is sent out from the controlled device automatically (without any request command).
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 16 TEAC Corporation 4-27. ISRC SENSE Requests the output of the ISRC code of the current track (ready mode) or the catalog (stop mode). This data can only be output when a playback-only disc is loaded.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 17 TEAC Corporation 4-34. ERROR SENSE Should be transmitted by the external controller on receipt of an ERROR SENSE REQUEST [F0] from the controlled device , to determine the exact error. The contents of the reply are described in the ERROR SENSE RETURN command.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 18 TEAC Corporation 5. Return C ommand Detail 5-1. TIME DATA When the Time mode is set to other than “ OFF ” with TIME DATA SEND SELECT command [ 3 F ], controlled device outputs the time data in specified form by TIME DATA SEND SELECT command [ 3 F ].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 19 TEAC Corporation 5-4. PITCH CONTROL DATA RETURN Transmitted in response to a PITCH CONTROL DATA PRESET command [25] with the request data ( [ FF ] ) to show the currently set Pitch Control value .
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 20 TEAC Corporation 5-8. TIMER/ RESUME PLAY SELECT RETURN Transmitted in response to a TIMER/ RESUME PLAY SELECT command [34] with the request data ( [ FF ] ) to show the currently set the Power-on-play/Resume function status .
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 21 TEAC Corporation 5-12. INCR PLAY SELECT RETURN Transmitted in response to a n INCR PLAY SELECT command [3A] with the request data ( [ FF ] ) to show the currently set the Incremental Play function status .
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 22 TEAC Corporation 5-16. MECHA STATUS RETURN Transmitted in response to a MECHA STATUS SENSE command [50] and gives the current mechanism status of the controlled device.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 23 TEAC Corporation 5-19. DISC STATUS RETURN Transmitted in response to a DISC STATUS SENSE command [56], giving the status of the loaded disc.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 24 TEAC Corporation 5-21. CURRENT TRACK TIME RETURN Transmitted in response to a CURRENT TRACK TIME SENSE command [58] , giving the specified form of the time data of the current track.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 25 TEAC Corporation 5-23. PGM TOTAL TRACK No./TOTAL TIME RETURN Transmitted in response to a PGM TOTAL TRACK No./TOTAL TIME SENSE command [5E] , giving the total number of the programmed tracks and the running time of the programmed tracks .
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 26 TEAC Corporation 5-28. ERROR SENSE RETURN Transmitted in response to an ERROR SENSE command [78] , giving the specific error that has occurred.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Tascam CD-01U c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Tascam CD-01U - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Tascam CD-01U, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Tascam CD-01U va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Tascam CD-01U, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Tascam CD-01U.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Tascam CD-01U. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Tascam CD-01U ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
